Avaliação do potencial antimicrobiano e antioxidante do extrato de jabuticaba (Myrciaria cauliflora) microencapsulado adicionado em linguiça frescal e mortadela

O objetivo do presente estudo foi utilizar o extrato de jabuticaba microencapsulado como corante e avaliar o seu potencial antimicrobiano e antioxidante em produtos cárneos embutidos do tipo linguiça frescal e mortadela, em substituição ao corante tradicionalmente utilizado carmim de cochonilha. Uma primeira etapa consistiu na avaliação in vitro da capacidade antioxidante e antimicrobiana do extrato de jabuticaba aquoso e microencapsulado. O extrato de jabuticaba foi obtido a partir do resíduo do despolpamento da fruta, com posterior desidratação (microencapsulação) por spray dryer, utilizando maltodextrina como agente carreador. A caracterização foi efetuada por determinação do teor de antocianinas e identificação destas por cromatografia líquida de alta eficiência (CLAE) e espectrometria de massas (MS), determinação da sua capacidade antioxidante pelos métodos Folin-Ciocalteu, capacidade redutora do ferro no plasma (FRAP) e capacidade antioxidante pelo radical DPPH. As características físicas avaliadas no extrato aquoso foram o valor de pH e o teor de sólidos solúveis. O potencial antimicrobiano foi determinado pelo método da concentração inibitória mínima (CIM) sobre as bactérias Staphylococcus aureus, Escherichia coli e Salmonella Enteritidis. O extrato de jabuticaba microencapsulado (EJM) foi utilizado para a elaboração de linguiça frescal e mortadela em duas diferentes concentrações: 2 e 4% de EJM para a linguiça frescal e 2% para mortadela. A linguiça frescal (à base de carne suína) e a mortadela (à base de carne bovina e carne mecanicamente separada de frango) foram avaliadas quanto à estabilidade durante armazenamento refrigerado a 1±1 e 4±1°C, por 15 e 56 dias, respectivamente. Os produtos foram caracterizados quanto à composição centesimal e foram realizadas análises físico-químicas, microbiológicas e sensoriais. Os resultados encontrados para a linguiça frescal confirmaram que o uso de 2% e 4% de EJM contribuíram para reduzir a oxidação lipídica durante os 15 dias de armazenamento e nas análises microbiológicas o EJM contribuiu para reduzir a contagem de microrganismos por quatro dias quando comparado com a linguiça controle (sem adição de EJM). A análise sensorial comprovou que 2% de EJM não comprometeu a maioria dos atributos sensoriais avaliados, com exceção da coloração mais escura. Recomenda-se, portanto, a utilização de 2% de EJM na produção de linguiça frescal. Nas mortadelas, os resultados não diferiram quando se comparou os produtos com 2% de EJM e sem adição do extrato (controle), porém, a utilização de 2% de EJM pode ser considerada uma alternativa interessante devido as demandas atuais por novas fontes de baixo custo e a utilização de pigmentos naturais que possam ser benéficos à saúde. Com estes resultados, pode-se dizer que o aproveitamento de cascas de jabuticaba oriundos do processamento da fruta, na forma de extrato microencapsulado, pode representar uma boa alternativa como corante natural, trazendo uma nova concepção da utilização de produtos mais saudáveis em linguiça frescal e mortadela.

Organização celular e observação microscópica

Com a atividade experimental desenvolvida pretendia-se comparar e observar as diferenças entre as células eucarióticas animais e vegetais. A principal diferença observada foi a presença da parede celular nas células vegetais e a ausência dela nas células animais. Também era pretendido aprender a utilizar o microscópio ótico, para aumentar a experiência aquando da sua utilização, compreendendo assim as alterações feitas por ele à imagem real e avaliando as diferentes ampliações e o efeito produzido por estas alterações na imagem real. Percebeu-se que a imagem observada no microscópio ótico, para além de ampliada é invertida e simétrica. Descobriu-se a importância do uso dos corantes para realçar os organelos a observar, bem como técnicas de preparação de lâminas.

Uso sustentável de pesticidas : análise comparativa entre a União Europeia e o Brasil

Tese de doutoramento, Ciências do Ambiente, Universidade de Lisboa, Faculdade de Ciências, 2016

Cumprimento das orientações acerca dos bufetes escolares para as escolas do 2º e 3º ciclos e ensino secundário de Portugal

Tese de mestrado, Doenças Metabólicas e Comportamento Alimentar, Universidade de Lisboa, Faculdade de Medicina, 2016

Utilização de ésteres de sacarose na produção de produtos farmacêuticos

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

ASPECTOS COMUNICATIVOS E CULTURAIS NOS HÁBITOS CULINÁRIOS CAIÇARA DA COMUNIDADE QUILOMBOLA DA FAZENDA PICINGUABA, DE UBATUBA SP

Estudo sobre os processos comunicativos envoltos na transformação dos hábitos culinários da comunidade quilombola da Fazenda Picinguaba de Ubatuba, SP. O objetivo é entender as origens e as causas que provocaram alterações nos hábitos culinários da comunidade do Quilombo da Fazenda, a partir de uma análise comparativa entre os fazeres primitivos e os praticados hoje. Foi analisado também o processo comunicacional desenvolvido para a transmissão da cultura alimentar entre as gerações, identificando as linguagens utilizadas. Como instrumento para o entendimento desses fenômenos, esta pesquisa foi realizada à luz das teorias e conceitos dos estudos culturais; dos conceitos sobre comunidades e identidades, além da teoria da folkcomunicação desenvolvida por Luiz Beltrão. Para tanto, foi realizada pesquisa bibliográfica e estudo de documentos, além de entrevistas utilizando-se a modalidade história oral com os membros da comunidade. Os resultados obtidos apontam uma mudança nos hábitos alimentares da comunidade do Quilombo da Fazenda, devido à facilidade de acesso ao comércio de gêneros alimentícios, decorrente da construção da rodovia Rio-Santos, e a influência trazida pela televisão, a partir da implantação da rede de energia elétrica em 2008. No entanto, observamos que apesar dessa mudança, a base da cultura alimentar quilombola vem mantendo muito dos seus aspectos originais. A comunicação dentro da comunidade quilombola e a transmissão dos saberes e fazeres tradicionais da comunidade ocorrem predominante pela oralidade. Identificamos a presença de dança, música, roda de conversa, culinária, artesanato que correspondem aos gêneros da folkcomunicação.

PERSONAGENS INFANTIS DO CINEMA NA PROPAGANDA: UMA ESTRATÉGIA NA COMUNICAÇÃO AO PEQUENO CONSUMIDOR

Esta pesquisa tem como foco o varejo de produtos alimentícios que estão em amplo crescimento comercial com o uso de imagens de personagens de cinema infantil na propaganda para potencializar as marcas no mercado. O objetivo é conhecer e interpretar de forma científica, como o uso de imagens de personagens de cinema infantil na publicidade pode resultar no desejo de consumo pelo pequeno consumidor. A metodologia por experimento com crianças de 4 a 6 anos de idade serviu como base para que a questão da pesquisa fosse respondida a partir da aplicação de uma simulação de um ponto direto de venda (PDV). Biscoitos recheados com aplicação nas embalagens de personagens de cinema infantil assim como personagens de publicidade ficaram à disposição de compra do pequeno consumidor. Na conclusão do experimento, observa-se que a questão da pesquisa foi respondida, ressaltando que a publicidade de produtos alimentícios infantis com aplicação de personagens publicitários mantém condições de venda mais favoráveis do que publicidade de produtos alimentícios infantis com aplicação de personagens de cinema infantil, o que cria uma aversão ao discurso do senso comum.(AU)

Extração do corante do fruto de castanhola (Terminalia catappa Linn) e estudos dos seus compostos fenólicos, antocianinas e atividade antioxidante

The Terminalia catappa Linn belonging to Combretaceae family, popularly known as castanets, has fruits consists of a fleshy pulp, rounded seed and a very hard shell. The natural pigmentation existing in the fruit of castanet indicates the presence of anthocyanins, phenolic nature components belonging to the group of flavonoids, which have antioxidant activity. This research was conducted with the castanets and aimed to the study of factors influencing the extraction of dyes from its pulp. The extracts were obtained using a reactor enjaquetado by solid-liquid extraction. The factors were evaluated as temperature, time, solvent ratio and pH extraction. Adopting a factorial design of 24 , with 4 repetitions at the central point, the effects of these factors on the extraction process were analyzed using Statistica 7.0 software. The antioxidant activity (AA), the content of phenolic compounds (CFT) and the total monomeric anthocyanin content (AMT) were evaluated as response variables planning. Statistical analysis of the results, the effects that influenced the extraction were different for each response (CFT, AMT and AA). However, the pH was significant for the extraction of all compounds. The kinetic behavior of the dye extraction was also studied for phenolic compounds, monomeric anthocyanins and antioxidant activity, in which the equilibrium was reached after 90 minutes of extraction. To study the stability of anthocyanins temperature was the factor that most influenced the stability, however the concentration and pH also played a part.

Aplicação de tecnologias eletroquímicas (oxidação via radicais hidroxila, oxidação mediada via cloro ativo e eletrocoagulação) para o tratamento de efluentes reais ou sintéticos

In this work the degradation of real and synthetic wastewater was studied using electrochemical processes such as oxidation via hydroxyl radicals, mediated oxidation via active chlorine and electrocoagulation. The real effluent used was collected in the decanter tank of the Federal University of Rio Grande do Norte (ETE-UFRN) of Effluent Treatment Plant and the other a textile effluent dye Ácido Blue 113 (AB 113) was synthesized in the laboratory. In the electrochemical process, the effects of anode material, current density, the presence and concentration of chloride as well as the active chlorine species on site generated were evaluated. Electrodes of different compositions, Ti/Pt, Ti/Ru0,3Ti0,7O2, BDD, Pb/PbO2 and Ti/TiO2-nanotubes/PbO2 were used as anodes. These electrodes were subjected to electroanalytical analysis with the goal of checking how happen the anodic and cathodic processes across the concentrations of NaCl and supporting electrolyte used. The potential of oxygen evolution reaction were also checked. The effect of active chlorine species formed under the process efficiency was evaluated by removing the organic matter in the effluent-ETE UFRN. The wastewater treatment ETE-UFRN using Ti/Pt, DDB and Ti/Ru0,3Ti0,7O2 electrodes was evaluated, obtaining good performances. The electrochemical degradation of effluent-UFRN was able to promote the reduction of the concentration of TOC and COD in all tested anodes. However, Ti/Ru0,3Ti0,7O2 showed a considerable degradation due to active chlorine species generated on site. The results obtained from the electrochemical process in the presence of chloride were more satisfactory than those obtained in the absence. The addition of 0.021 M NaCl resulted in a faster removal of organic matter. Secondly, was prepared and characterized the electrode Ti/TiO2-nanotubes/PbO2 according to what the literature reports, however their preparation was to disk (10 cm diameter) with surface area and higher than that described by the same authors, aiming at application to textile effluent AB 113 dye. SEM images were taken to observe the growth of TiO2 nanotubes and confirm the electrodeposition of PbO2. Atomic Force Microscope was also used to confirm the formation of these nanotubes. Furthermore, was tested and found a high electrochemical stability of the electrode Ti/TiO2-nanotubes/PbO2 for applications such as long-term indicating a good electrocatalytic material. The electrochemical oxidation of AB 113 using Ti/Pt, Pb/PbO2 and Ti/TiO2-nanotubes/PbO2 and Al/Al (electrocoagulation) was also studied. However, the best color removal and COD decay were obtained when Ti/TiO2-nanotubes/PbO2 was used as the anode, removing up to 98% of color and 92,5% of COD decay. Analysis of GC/MS were performed in order to identify possible intermediates formed in the degradation of AB 113.

Tecnologia eletroquímica como tratamento alternativo de efluentes derivados da indústria têxtil e petroquímica

In this work, the treatment of wastewater from the textile industry, containing dyes as Yellow Novacron (YN), Red Remazol BR (RRB) and Blue Novacron CD (NB), and also, the treatment of wastewater from petrochemical industry (produced water) were investigated by anodic oxidation (OA) with platinum anodes supported on titanium (Ti/Pt) and boron-doped diamond (DDB). Definitely, one of the main parameters of this kind of treatment is the type of electrocatalytic material used, since the mechanisms and products of some anodic reactions depend on it. The OA of synthetic effluents containing with RRB, NB and YN were investigated in order to find the best conditions for the removal of color and organic content of the dye. According to the experimental results, the process of OA is suitable for decolorization of wastewaters containing these textile dyes due to electrocatalytic properties of DDB and Pt anodes. Removal of the organic load was more efficient at DDB, in all cases; where the dyes were degraded to aliphatic carboxylic acids at the end of the electrolysis. Energy requirements for the removal of color during OA of solutions of RRB, NB and YN depends mainly on the operating conditions, for example, RRB passes of 3.30 kWh m-3 at 20 mA cm-2 for 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (estimated data for volume of treated effluent). On the other hand, in the study of OA of produced water effluent generated by petrochemical industry, galvanostatic electrolysis using DDB led to the complete removal of COD (98%), due to large amounts of hydroxyl radicals and peroxodisulphates generated from the oxidation of water and sulfates in solution, respectively. Thus, the rate of COD removal increases with increasing applied current density (15-60 mAcm-2 ). Moreover, at Pt electrode, approximately 50% removal of the organic load was achieved by applying from 15 to 30 mAcm-2 while 80% of COD removal was achieved for 60 mAcm-2 . Thus, the results obtained in the application of this technology were satisfactory depending on the electrocatalytic materials and operating conditions used for removal of organic load (petrochemical and textile effluents) as well as for the removal of color (in the case of textile effluents). Therefore, the applicability of electrochemical treatment can be considered as a new alternative like pretreatment or treatment of effluents derived from textiles and petrochemical industries.

Avaliação do tratamento eletroquímico (direto e indireto) como alternativa de degradação do corante azul de metileno

Textile industry has been a cause of environmental pollution, mainly due to the generation of large volumes of waste containing high organic loading and intense color. In this context, this study evaluated the electrochemical degradation of synthetic effluents from textile industry containing Methylene Blue (AM) dye, using Ti/IrO2-Ta2O5 and Ti/Pt anodes, by direct and indirect (active chlorine) electrooxidation. We evaluated the influence of applied current density (20, 40 and 60 mA/cm2 ), and the presence of different concentrations of electrolyte (NaCl and Na2SO4), as well as the neutral and alkaline pH media. The electrochemical treatment was conducted in a continuous flow reactor, in which the electrolysis time of the AM 100 ppm was 6 hours. The performance of electrochemical process was evaluated by UV-vis spectrophotometry, chemical oxygen demand (COD) and total organic carbon (TOC). The results showed that with increasing current density, it was possible to obtain 100 % of color removal at Ti/IrO2-Ta2O5 and Ti/Pt electrodes. Regarding the color removal efficiency, increasing the concentration of electrolyte promotes a higher percentage of removal using 0,02 M Na2SO4 and 0,017 M NaCl. Concerning to the aqueous medium, the best color removal results were obtained in alkaline medium using Ti/Pt. In terms of organic matter, 86 % was achieved in neutral pH medium for Ti/Pt; while a 30 % in an alkaline medium. To understand the electrochemical behavior due to the oxygen evolution reaction, polarization curves were registered, determining that the presence of NaCl in the solution favored the production of active chlorine species. The best results in energy consumption and cost were obtained by applying lower current density (20 mA/cm2 ) in 6 hours of electrolysis.

Aplicação da perlita expandida modificada com ortofenantrolina na remoção do negro de eriocromo T em águas residuais geradas em laboratórios de ensino de química

In this study, we carried out the study of Eriochrome black T removal using expanded perlite modified orthophenanthroline by adsorption technique. The study of the adsorption process was performed by investigating the effect of the initial dye concentration, contact time and pH range of the solution (acidic and alkaline) in the adsorption process, for a so-called synthetic effluent (aqueous solution of black eriochrome T) and a real effluent (generated from the test for determining the water hardness, by complexation titration). The materials were characterized by Thermogravimetry / Differential Thermal Analysis (TG / DTA), absorption spectroscopy in the infrared (IR), X-ray Diffraction (XRD) and scanning electron microscopy (SEM). By analysis of XRD observed thinking on orthophenanthroline the modified expanded perlite. And by IR analysis showed an increase in intensity and a detailed enlargement of the absorption band related to the axial deformation of the OH bond of silanol groups of perlite (Si-OH). In the equilibration time of the study, in the evaluated time range (5-230 min) was not possible to observe the existence of a balance of time, probably attributed to the type of interaction between the Eriochrome black-T and the expanded perlite modified orthophenanthroline, being an interaction of surface origin. In the study effect of the initial concentration of the adsorbate in the case 2,0x10-4 mol / L natural pH (pH 5) gave the highest removal percentage value of eriochrome T black color with 63.74 % removal in 20 minutes of contact. In evaluating the effect of varying the pH of Eriochrome black T solution in the adsorption process, it was found that the more acidic the environment, the greater the percentage stain removal, being a result of acid-base interaction between the adsorbate and the adsorbent. In T Eriochrome black removal study in real effluent we used the optimized conditions by studying with synthetic sewage. The dye removal at pH 10, natural pH of the effluent was no significant reaching the maximum amount of color removal percentage of 8.12%, obtained already at pH 3 with maximum color removal 100.00% of color, once more proving that eriochrome black T and effectively interact better with the adsorbent at acid pH values (pH 5 or 3), and most efficiently at pH 3. thus one can mention that the perlite expanded (an amorphous aluminosilicate naturally acid) modified with orthophenanthroline (one Bronsted base) consists of a master and effective removal of coloring material in the acid-type aqueous solution, the conditions expressed in this study, can be applied as an adsorbent of this dye also mums real effluent.

Caracterização e avaliação da atividade fotocatalítica de catalisadores baseados no TiO2, sintetizados mediante hidrólise em uma mistura de solventes

This study involved the synthesis of photocatalysts based on titanium dioxide (TiO2). The photocatalysts were synthesized by the sol-gel method using three different proportions of acetone (25%, 50% and 75% v/v) in water/acetone mixtures, in order to control the hydrolysis of the precursor of titanium (titanium tetraisopropoxide). Aiming to investigate the structural, morphological and electronic changes provoked by the use of the solvent mixtures, different methodologies were used to characterize the oxides, such as X-ray diffraction (XRD), RAMAN spectroscopy, UV-Vis diffuse reflectance spectroscopy, and measurements of specific surface area (BET). XRD combined to RAMAN analyses revealed that the products are two-phase highly crystalline oxides involving anatase as main phase and brookite. Besides, the refined XRD using the method of Rietveld demonstrated that the presence of acetone during the synthesis influenced in the composition of the crystalline phases, increasing the proportion of the brookite phase between 13 and 22%. The band gap energy of these oxides practically did not suffer changes as function of the synthesis conditions. As shown by the isotherm, these photocatalysts are mesoporous materials with mean diameter of pores of 7 nm and approximately 20% of porosity. The surface area of the oxides prepared by hydrolysis in presence of acetone was 12% higher compared to the bare oxide. After characterized, these oxides had their photocatalytic activities evaluated by photodegradation of the azo dyes Ponceau 4R (P4R), Tartrazine (TTZ) and Reactive Red 120 (RR120), and also by the ability to mediate the photocatalytic production of hydrogen. Using the most efficient photocatalyst, the mineralization achieved for the dyes P4R, RR120 and TTZ was of respectively 83%, 79% and 56% in 120 minutes of reaction, while the discoloration of P4R e RR120 reached 100% and 94% for TTZ. In addition, the same photocatalyst in the presence of 0.5% w/w of Platinum and suspended in a 5:1 v/v water/methanol mixture, produced 56 mmol of gaseous hydrogen in five hours of experiment, corresponding to a specific rate of hydrogen production of 139.5 mmol h-1 g-1.

Alergias a alimentos ou a derivados usados como excipientes em medicamentos

Aditivos químicos têm como principal objetivo melhorar os produtos industrializados, como fármacos, conferindo-lhes cor, aroma, textura, conservação, entre outros. Os aditivos utilizados na indústria farmacêutica são denominados excipientes, completando a massa ou o volume especificado no medicamento. São considerados substâncias inativas, uma vez que não apresentam propriedades curativas ou preventivas de doenças ou dos seus sintomas. No âmbito deste trabalho, foi realizado uma revisão bibliográfica sobre os excipientes naturais e sintéticos mais usados na indústria farmacêutica, agrupando-os mediante a sua função específica. Assim, foi feita uma breve descrição sobre alguns dos excipientes mais utilizados nas formulações farmacêuticas, nomeadamente os antioxidantes, os corantes, os edulcorantes e os conservantes, que visam garantir a conservação do produto em condições viáveis. Uma vez que os excipientes são considerados substâncias inativas, são vistos como inofensivos para a saúde. No entanto, é cada vez mais evidente que os excipientes não são sempre inertes e podem apresentar riscos para o desenvolvimento de reações alérgicas, podendo promover alterações mais prejudiciais. As reações alérgicas associadas aos excipientes são consideradas raras, visto que são incorporadas baixas concentrações destes em formulações farmacêuticas, tendo surgido, no entanto, diversos casos associados aos diferentes excipientes anteriormente referidos. Dependendo do excipiente e da sensibilidade do indivíduo, as alergias podem originar dermatites de contacto, prurido, urticária, edema, reações anafiláticas, entre outros. É importante salientar que o excesso de aditivos pode originar problemas de saúde, normalmente em indivíduos suscetíveis e na população pediátrica, sendo necessário aplicar cuidados adicionais que promovam uma maior vigilância e orientação no uso de medicamentos.

Avaliação dos parâmetros de insensibilização e os impactos na qualidade da carne de perus (Meleagris gallopavo)

Brazil is the third largest producer and exporter of turkey meat, especially in Paraná state, with the largest production volume. In worldwide the animal welfare is a prerequisite for food quality of animal origin, especially in Europe. The Regulation of European Community No 1099/2009 provides requirements for poultry stunning that associate with animal welfare as a means to minimize the pain and suffering from the slaughter. Improper application of callousness should produce low-quality meat, and significant industry losses. This Research aimed to evaluate the impacts on the quality of meat from turkeys, applying electrical stunning parameters established in the Regulation No 1099/2009 of the Council of 24 September 2009. Was applied an outline with 8 tests set equidistantly to frequency, and set parameters for current and voltage, and a control test. Were conducted qualitative assessments of hematoms and bruises / fractures in carcasses, hematoms, blood splashed and bleeding in turkey breast, and quantitative pH, color (L *), water holding capacity and shear force in turkey breast. The individual assessments showed no significant difference (p>0,05). In multivariate cluster analysis was the formation of two distinct groups: group 1 - 50 Hz to 200 Hz (low frequency) and group 2 - 633 Hz to 1500 Hz (high frequency), which showed significant difference (p= 0,016). In principal component analysis multivariate, the group 1 tend to have a higher incidence of bruising, blood splashed, bleeding and water holding capacity in breast turkeys, and bruises / fractures and hematoms on carcasses. The Group 2 tends to have a lower incidence of these parameters, and higher pH values, shear force and color (L *). Positive correlation was obtained for the parameters pH and shear force (r= 0.7506, p=0.0198); bleeding and splashed blood (r= 0.8811, p= 0.0017), and negative correlation to color (L*) and splashed blood on breast (r= -0.7889; p= 0.0115); breast hematoms and shear force (r= -0.7844; p= 0.0123). It has been observed that at lower frequencies stunning tends to have higher incidence of defects in the carcasses and turkey breast. The use of high frequencies in stunning, create smaller quantity of trimming, and an increase in turkey breast volume produced, with a financial gain of approximately R$250,000.00 / year. Moreover, there is no need increase the workers to do the trimming tasks and, therefore, higher financial results for companies. Therefore, we recommend the use of high frequencies in the stunning of turkeys.