Electron effect of p-substituent on iron(II) and cobalt(II) pyridinebisimine catalyst for ethylene polymerization

A series of 2,6-bis(imino)pyridyl iron and cobalt complexes bearing p-substituent [2,6-(ArN=CMe)(2)C5H3N]-MCl2 (Ar=2,6-Me2C6H3, 2,4,6-Me3C6H2, 2,6-Me-2-4-BrC6H2, 2,6-Me-2-4-ClC6H2, 2,4-Me-2-6-BrC6H2, 2,4-Me-(2)-6-ClC6H2, while M=Fe, Co) have been synthesized and investigated as catalysts for ethylene polymerization in the presence of modified methylaluminoxane as a cocatalyst. The electron effect and positions of the substitueni of pyridinebisimine ligands were observed to affect considerably catalyst activity and polymer property.

A new alpha-Keggin type polyoxometalate coordinated to four silver complex moieties: {PW9V3O40[Ag(2,2 '-bipy)](2)[Ag-2(2,2 '-bipy)(3)](2)}

A new polyoxometalate derivative {PW9V3O40[Ag(2,2'-bipy)](2)[Ag-2(2,2'-bipy)(3)](2)} 1 has been hydrothermally synthesized and structurally characterized by the single crystal X-ray diffraction. X-Ray analysis showed that both [Ag(2,2'-bipy)](+) and [Ag-2(2,2'-bipy)(3)](2+) units are supported on the alpha-Keggin polyoxoanion [PW9V3O40](6-) via the surface bridging oxygen atoms. 1 represents the first alpha-Keggin type polyoxoanion coordinated with four transition metal complex moieties, which further acts as a neutral molecular units for the construction of an interesting three-dimensional supramolecular framework.

Sol-gel derived carbon ceramic electrode bulk-modified with tris(1,10-phenanthroline-5,6-dione)iron(II) hexafluorophosphate and its use as an amperometric iodate sensor

A surface-renewable tris (1,10-phenanthroline-5, 6-dione) iron (II) hexafluorophosphate (FePD) modified carbon ceramic electrode was constructed by dispersing FePD and graphite powder in methyltrimethoxysilane (MTMOS) based gels. The FePD-modified electrode presented pH dependent voltammetric behavior, and its peak currents were diffusion-controlled in 0.1 mol/L Na2SO4 + H2SO4 solution (pH = 0. 4). In the, presence of iodate, clear electrocatalytic reduction waves were observed and thus the chemically modified electrode was used as an amperometric sensor for iodate in common salt. The linear range, sensitivity, detection limit and response time of the iodate sensor were 5 x 10(-6)-1 x 10(-2) mol/L, 7.448 muA.L/mmol, 1.2 x 10(-6) mol/L and 5 s, respectively. A distinct advantage of this sensor is its good reproducibility of surface-renewal by simple mechanical polishing.

Hydrothermal synthesis and structural characterization of a novel organic-inorganic hybrid compound {[Cu(2, 2 '-bpy)(2)](2)-Mo8O26}

A novel organic-inorganic hybrid compound {[Cu (2, 2'-bpy)(2)](2)Mo8O26} has been hydrothermally Synthesized and structurally characterized by single-crystal X-ray diffraction. The compound crystallizes in the orthorhombic space group, Pna2(1), with a=2.4164 (5), b=1.8281 (4), c=1.1877 (2) nm, V=5.247(2) nm(3), Z=4, and final R-1=0.0331, wR(2)=0.0727. The structure consists of discrete {[Cu(2,2'-bpy)(2)](2)Mo8O26} clusters, constructed from a beta -octamolybdate subunit[Mo8O26](4-) covalently bonded to two [Cu(2,2'-bpy)(2)](2+) coordination complex cations via bridging oxo groups. In addition, the spectroscopic properties and thermal behavior of this compound have been investigated by spectroscopic techniques (UV-vis, IR, Raman and EPR spectra) and TG analysis.

Tunable thermomorphism and applications of ionic liquid analogues of Girard's reagents

A series of ionic liquids based on Girard's reagents was synthesised. Their tunable thermomorphic behaviour with water was demonstrated, and slight modifications in the cationic structure led to drastic changes in their water miscibility. Their phase behaviour, involving monophasic–biphasic transitions, drove a number of practical applications, including scavenging water-soluble dyes and the extraction of metals from water.

Investigation of structural effects on the reactivity of heterocyclic bioactive compounds

Tese de dout., Química, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2008

Polyoxométallates hybrides : vers des systèmes covalents photoactifs dans le visible

Réalisé en cotutelle, sous la direction du Pr. Bernold Hasenknopf, à l'Institut Parisien de Chimie Moléculaire, Université Pierre et Marie Curie (Paris VI, France) et dans le cadre de l'Ecole Doctorale "Physique et Chimie des Matériaux" - Spécialité Chimie Inorganique (ED397).

Redox-active, dinuclear sandwich compounds [Cp*Fe(μ-L)FeCp*] (L = naphthalene and anthracene)

Although there has been much interest in the chemistry of bimetallic transition metal complexes, compounds with naphthalene or anthracene as bridging ligands are still rare. In this article, we describe the synthesis of the homodinuclear iron complexes [Cp*Fe(μ-η4:η4-L)FeCp*] (1: L = C10H8, 2: L = C14H10; Cp* = η5-C5Me5). The complexes were characterized by 1H and 13C{1H} NMR, UV/Vis, and 57Fe Mössbauer spectroscopy, and their molecular structures were determined by X-ray crystallography. Both complexes are diamagnetic as a result of the strong magnetic coupling of the 17e FeI centers mediated by the polyarene bridge. An analysisof the redox behavior of 1 and 2 by cyclic voltammetry andUV/Vis spectroelectrochemistry shows that the complexes can be oxidized reversibly in two well-separated one-electron steps to the monocation [Cp*Fe(μ-L)FeCp*]+ and the dication [Cp*Fe(μ-L)FeCp*]2+. The reduction to the monoanion [Cp*Fe(μ-L)FeCp*]– was also observed.

Langmuir-Blodgett films of diazobenzene molecules

Langmuir-Blodgett (LB) films from diazobenzene Sudan III have been investigated using surface potential measurements as a function of number of layers and deposition pressures, with the surface potential data being related to molecular dipole moments obtained from theoretical electronic structure calculations. The surface potential increased with the number of layers for SIII LB films, and then tended to saturate. Results from density functional theory (DIFT) and UV-vis spectroscopy indicated that the increase is due to addition of layers with oriented molecular dipoles, with the saturation tendency being attributed to a decrease in the amount of material deposited in each layer. The surface potential increased with the surface pressure used for deposition, probably owing to a higher contribution from the vertical component of the dipole moment as a closer molecular packing, which is associated with decreasing conformational entropy, was reached. (C) 2008 Elsevier Inc. All rights reserved.

Synthesis and Characterization of Homoleptic and Heteroleptic Cobalt, Nickel, Copper, Zinc and Cadmium Compounds with the 2-(Tosylamino)-N-[2-(tosylamino)benzylidene]aniline Ligand

The electrochemical oxidation of anodic metal (cobalt, nickel, copper, zinc and cadmium) in an acetonitrile solution of the Schiff-base ligand 2-(tosylamino)-N-[2-(tosylamino)-benzylidene] aniline (H(2)L) afforded the homoleptic compounds [ML]. The addition of 1,1-diphenylphosphanylmethane (dppm), 2,2`-bipyridine (bipy) or 1,10-phenanthroline (phen) to the electrolytic phase gave the heteroleptic complexes [NiL(dppm)], [ML(bipy)] and [ML(phen)]. The crystal structures of H(2)L (1), [NiL] (2), [CuL] (3), [NiL(dppm)] (4), [CoL(phen)] (5), [CuL(bipy)] (6) and [Zn(Lphen)] (7) were determined by X-ray diffraction. The homoleptic compounds [NiL] and [CuL] are mononuclear with a distorted square planar [MN(3)O] geometry with the Schiff base acting as a dianionic (N(amide)N(amide)N(imine)O(tosyl)) tetradentate ligand. Both compounds exhibit an unusual pi-pi stacking interaction be-tween a six-membered chelate ring containing the metal and a phenylic ring of the ligand. In the heteroleptic complex [NiL(dppm)], the nickel atom is in a distorted tetrahedral [NiN(3)P] environment defined by the imine, two amide nitrogen atoms of the L(2-) dianionic tridentate ligand and one of the phosphorus atoms of the dppm molecule. In the other heteroleptic complexes, [CoL(phen)], [CuL(bipy)] and [ZnL(phen)], the metal atom is in a five-coordinate environment defined by the imine, two amide nitrogen atoms of the dianionic tridentate ligand and the two bipyridine or phenanthroline nitrogen atoms. The compounds were characterized by microanalysis, IR and UV/Vis (Co, Ni and Cu complexes) spectroscopy, FAB mass spectrometry and (1)H NMR ([NiL] and Zn and Cd complexes) and EPR spectroscopy (Cu complexes).

Identification of species formed after pyridine adsorption on iron, cobalt, nickel and silver electrodes by SERS and theoretical calculations

The adsorption of pyridine (py) on Fe, Co, Ni and Ag electrodes was studied using surface-enhanced Raman scattering (SERS) to gain insight into the nature of the adsorbed species. The wavenumber values and relative intensities of the SERS bands were compared to the normal Raman spectrum of the chemically prepared transition metal complexes. Raman spectra of model clusters M(4)(py) (four metal atoms bonded to one py moiety) and M(4)(alpha-pyridil) where M = Ag, Fe, Co or Ni were calculated by density functional theory (DFT) and used to interpret the experimental SERS results. The similarity of the calculated M(4)(py) spectra with the experimental SERS spectra confirm the molecular adsorption of py on the surface of the metallic electrodes. All these results exclude the formation of adsorbed alpha-pyridil species, as suggested previously. Copyright (C) 2009 John Wiley & Sons, Ltd.

Crown ethers : applications in inorganic synthesis

The ability of macroheterocyclic compounds to complex with ionic species has led to the synthesis and investigation of many multidentate macroheterocyclic species. The most stable complexes are formed between macrocyclic polyetheral ligands (crown ethers) with alkali or alkaline earth metal iona. There is an excellent correlation of the stability of these complexes with the size of the cation and the site of the cavity in the macrocyclic ligand. Additional factors, such as the basicity of the ligand and the solvating ability of the solvent, also play important roles in the stabilization of the complex. The stability of such complexes has been advantageously used to increase anionic reactivity and has been successfully applied to several organic fluorinations, oxidations, and similar reactions. The use of macrocyclic ligands in inorganic syntheses of otherwise difficult to obtain fluoro compounds has not been reported. O-carborane and m-carborane, C2BlOHl2, are icosahedral cage systems derived from Bl2H122- by replacement of BH with the isoelectronic CH group. These stable molecules exhibit electron-deficient bonding which can best be explained by delocalization of electrons. This delocalization gives rise to stability similar to that found in aromatic hydrocarbons. Crown ether activated potassium fluoride has been successfully employed in the conversion of alkyl, acyl and aryl halides to their respective fluorides. Analogously halide substituted carboranes were prepared, but their fluoro-derivatives were not obtained. The application of crown ethers in the synthesis of transition metal complexes is relatively unexplored. The usual synthesis of fluoro-derivative transition metal complexes involves highly reactive and toxic fluorinating agents such as antimony trifluoride, antimony penta fluoride. bromine trifluoride and hydrogen fluoride, An attempted preparation of the hexafluoroosmate (IV) ion via a crown activated, or naked fluoride~was unsuccessful. Potassium hexafluoroosmate (IV), K208F6. was eventually prepared using bromine trifluoride as a fluorinating and oxidizing agent .

Estudo de nanocompósitos luminescentes baseados em complexos de Eu(III) e Ir(III) ancorados à nanopartículas de sílica por bases de Schiff

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Molekularer Magnetismus und Multistabilitäten in sternförmigen cyanidgebrückten Eisen- und Übergangsmetall-Komplexverbindungen

In der hier vorliegenden Arbeit wurden neue eisenhaltige Spincrossover-Komplexerndargestellt und deren magnetische Eigenschaften untersucht. Ausgehend von früheren Ergebnissen wurden verschiedene Strategien zur Optimierung der Eisen-Spincrossover Verbindungen verfolgt. Wie schon früher dokumentiert finden sich bei Eisen-Übergangsmetall Komplexen eine Vielzahl von Spincrossover Phänomenen. Ebenso gut dokumentiert sind die Möglichen Änderungen des Spin Zustandes durch äußere Einflüsse wie Temperatur, Druck oder Licht. Darauf aufbauend wurden nunrnverschiedene Eisenkomplexe synthetisiert und auf das Spincrossover Phänomen hin untersucht. Dazu wurden zum Einen Fe(II) Komplexe vom Typ [FeL1(NCS)2] (L1 = pmea, pmap, tepa and tmpa) betrachtet und zum anderen Sternförmige Fe(III) Komplexe vom Typ [M{(CN-FeIIIL2}x]y+. (M=Fe(II), Co(III), Mo(IV), Ru(II)) undrndodecanukleare Komplexe vom Typ [(L2Fe(III)NC)5Fe(II)CNCo(III)(CNFe(III)L2)5]4+. L2= Bis(R2,3,4 -salicylidenaminoalkyl-R1-amin. Thermischen Spincrossover und LIESST zeigen [3,3/N-H/Sal-H/Fe/Co]; [3,3/N-H/Sal-H/Fe/Ru]; [3,3/N-H/sal-H/Fe/Mo]; [3,3/N-H/Sal-H/Fe/W]; FeII(pmea)(SCN)2; thermischen Spinübergang zeigt [2,3/N-H/Sal-H/Fe/Fe-Co]. Die Ethylen gebrückten Komplexe zeigen weniger guten oder gar keinen Schalteffekt im Gegensatz zum Propylen gebrückten Komplexe. Fe(II)(PMEA)(SCN)2 zeigt vollständigen thermischen Spinübergang von High Spin nach Low Spin ein LIESST und einen LiPTH Effekt.

Verknüpfung metallhaltiger Pivalatkomplexe über polyfunktionale organische Brückenliganden

Ziel der hier vorliegenden Dissertation ist es, Übergangsmetallpivalate durch gezielte Substitution monodentater Donorliganden in apikalen Positionen, unter Erhalt ihrer Grundstruktur, zu höherdimensionalen Verbindungen zu verknüpfen. Als Ausgangs-verbindungen dienen dabei [Fe3O(O2C-tBu)6(OH2)3]O2C-tBu und [Ni2(OH2)(O2C-tBu)4(HO2C-tBu)4].rnrnIm ersten Teil dieser Arbeit konnten, in Abhängigkeit der in den Reaktionen eingesetzten Liganden mit [Fe3O(O2C-tBu)6(OH2)3]O2C-tBu, symmetrisch oder asymmetrisch substituierte dreikernige Verbindungen erhalten werden. Deren strukturellen und magnetischen Eigenschaften konnten untersucht werden und die daraus resultierenden magnetostrukturellen Korrelationen auf die folgenden vorgestellten mehrkernigen bzw. höherdimensionalen Verbindungen übertragen werden, die erheblich an Komplexität zugenommen haben.rnDie 0-dimensionalen dreikernigen Einheiten zeigen, abhängig von ihren Fe-O-Bindungslängen in den µ3-Oxo verbrückten Einheiten, unterschiedlich starke antiferro-magnetische Austauschwechselwirkungen. Wenn in den Verbindungen eine längere Fe-O-Bindung und zwei kürzere Fe-O-Bindungen existieren, können diese Typ 2:a zugeordnet werden. Daraus folgt, dass die Daten der magnetischen Suszeptibilität mit zwei unterschiedlich starken Austauschwechselwirkungen (J-Kopplungen) zu simulieren sind. Es liegen eine stärkere J-Kopplung über die kurzen Fe-O-Bindungen und zwei schwächere über die lange Fe-O-Bindung vor (J1 > J2). Existieren hingegen eine kürzere Fe-O-Bindung und zwei längere Fe-O-Bindungen (Typ 2:b) sind nun die magnetischen Suszeptibilitätsdaten nur mit zwei stärkeren und einer schwächeren Kopplung zu simulieren (J1 < J2). Die vorgestellten Verbindungen zeigen alle einen Spingrundzustand S≠0, der durch konkurrierende Wechselwirkungen der Spinzentren in Dreieckssituationen begründet ist. rnDer zweite Teil der Arbeit beschäftigte sich mit dem gezielten Aufbau mehrkerniger Verbindungen, in denen die dreikernige Einheit als Grundmotiv erhalten bleiben konnte. Die Austauschwechselwirkungen der fünf- und sechskernigen Verbindungen konnten in Abhängigkeit der Bindungslängen und basierend auf den Ergebnissen der dreikernigen Einheiten aus dem ersten Teil, bestimmt werden. rnDie Synthesen der 4-Hydroxybenzaldehyd verbrückten Kettenverbindung sowie des über 3,5,3’,5’-Tetramethyl-1H,1’H-[4,4’]bipyrazolyl verknüpften 3-dimensionalen Nickelnetzwerks zeigten die erfolgreiche Umsetzung des „Bottom Up“ Ansatzes. Durch Erhaltung des jeweiligen Grundmotivs der verwendeten Ausgangsverbindung konnten die magnetischen Austauschwechselwirkungen unter Einbeziehung schwacher Wechselwirkungen durch den Raum, mit Hilfe der Theta-Weiss Temperatur, in den Simulationen bestimmt werden.rnrnDamit stellt der „Bottom Up“ Ansatz eine hervorragende Syntesestrategie für den Aufbau höherdimensionaler Verbindungen, ausgehend von zwei- bzw. dreikernigen Übergangs-metallkomplexen, dar.rn