Price setting and macroeconomic variables: evidence from Brazilian CPI

Esta tese investiga as estratégias de precificação em ambientes macroeconômicos distintos, utilizando uma base de dados única para o IPC da Fundação Getulio Vargas. A base de dados primária consiste em um painel de dados individuais para bens e serviços representando 100% do IPC para o período de 1996 a 2008. Durante este período, diversos eventos produziram uma variabilidade macroeconômica substancial no Brasil: duas crises em países emergentes, uma mudança de regime cambial e monetário, racionamento de energia, uma crise de expectativas eleitorais e um processo de desinflação. Como consequência, a inflação, a incerteza macroeconômica, a taxa de câmbio e o produto exibiram uma variação considerável no período. No primeiro capítulo, nós descrevemos a base de dados e apresentamos as principais estatísticas de price-setting para o Brasil. Em seguida, nos capítulos 2 e 3, nos construímos as séries de tempo destas estatísticas e das estatísticas de promoções, e as relacionamos com as variáveis macroeconômicas utilizando análises de regressões. Os resultados indicam que há uma relação substancial entre as estatísticas de price-setting e o ambiente macroeconômico para a economia brasileira.

India’s Priorities as an Emerging Power

Palestra do Embaixador da Índia no Brasil, B.S. Prakash. O Embaixador atua no Brasil desde Agosto de 2008 e é diplomata de carreira desde 1975. Serviu na Alemanha, Arábia Saudita e Áustria em diversos âmbitos, foi Embaixador em Uganda (1998-2001) e ministro-chefe da missão diplomática do Sri Lanka (1995-98). Atuou, ainda, a serviço do Ministério de Relações Exteriores como o chefe da divisão das Nações Unidas. Foi Cônsul-Geral da Índia (com grau de Embaixador) na Costa Oeste dos EUA. Atuou como representante da Índia junto à International Atomic Energy Agency (IAEA), em Viena, e liderou missões diplomáticas para a discussão de agendas políticas de desarmamento, resolução de conflitos, operações de paz e direito internacional.

Mobilidades Urbanas - Brevíssimas notas sobre o projeto 'Emerging Middle Classes and Low Carbon Mobilities: Setting long term foundations for transnational research'

Em uma conjuntura de expansão urbana, intensificação do consumo, mudança climática e escassez de petróleo, o tema das mobilidades assume inquestionável importância econômica, social e ambiental. O seminário internacional "Mobilidades Urbanas: Alicerces para Pesquisas Transnacionais" volta-se, por um lado, para a fomentação do debate em torno do paradigma das novas mobilidades - envolvendo mobilidade espacial e socioeconômica, entre outras - e de sua aplicabilidade no contexto brasileiro; por outro, para a capacitação de pesquisadores cujas investigações tematizam os processos de mobilidade social e espacial a partir de perspectivas comparativas e transnacionais.

Projeto de transposição de águas do Rio São Francisco: uma análise à luz do processo de agenda-setting

Quais condições permitiram que o Projeto de Transposição de Águas do Rio São Francisco deixasse de figurar no imaginário daqueles que o defendiam, como o vinha sendo desde os idos do período imperial, e, começasse a ser efetivamente implementado somente em 2007? Responder a esta questão corresponde ao objetivo principal deste estudo. Para tal, o Projeto São Francisco, como também é conhecido, foi analisado à luz do modelo de multiple streams, concebido por John Kingdon (2003), orientado para a compreensão sobre como algumas questões passam a fazer parte da agenda de governo, recebendo atenção dos formuladores de políticas públicas, enquanto outras são ignoradas. Por meio do modelo de multiple streams, foi possível apontar os principais diagnósticos e alternativas historicamente apresentados para a região do semiárido brasileiro, frente à questão dramática das secas recorrentes. Além disso, foi estruturado o complexo jogo político da transposição, caracterizado pelo conflito entre coalizões atuantes em múltiplas arenas decisórias. A partir do mapeamento da forma como os atores políticos se apropriaram dos diagnósticos e alternativas apresentados para a região, com o intuito de impor aos demais as suas crenças sobre qual deve ser o melhor caminho para o desenvolvimento do semiárido, foram identificadas as janelas de oportunidades (policy windows) que tornaram viáveis a execução do projeto de transposição.

Acompanhamento terapêutico como dispositivo da reforma psiquiátrica : considerações sobre o setting

Este trabalho estuda uma modalidade de atenção em saúde denominada acompanhamento terapêutico, que é importante ferramenta para o tratamento de sujeitos psicóticos e útil para a Reforma Psiquiátrica. Estuda-se o setting do AT, a fim de estabelecer uma relação possível entre os conceitos psicanalíticos e as singularidades que esta modalidade propõe, problematizando-as através dos seguintes conceitos: dispositivo, acaso/acontecimento e cidade. Busca-se algumas respostas às seguintes questões: Como se estabelece uma relação que propicie o surgimento de um encontro entre acompanhante e acompanhado? No acompanhamento terapêutico como poderíamos pensar um início de tratamento? O que de fato ocorre ou precisa acontecer? O que significa isto do ponto de vista da psicanálise e considerando que estamos trabalhando com sujeitos psicóticos? Qual o espaço de trabalho, ou melhor dizendo, o setting do AT? Que conceitos estão em jogo nesse setting. Podemos nos apoiar nas descobertas freudianas ainda que o setting seja sabidamente diferente? Que problemas isso acarreta desde o ponto de vista técnico? A metodologia é o estudo de caso único. Utiliza-se como fonte os registros de um atendimento, entrevistas e o material escrito produzido pelo próprio sujeito acompanhado. Escolheu-se cenas ilustrativas do caso atendido vinculando-as à teorização apresentada. Entende-se o acompanhamento terapêutico como importante dispositivo clínico e político do processo da Reforma Psiquiátrica. O acompanhante terapêutico é um agente que transita entre os espaços de tratamento (o dentro) e os demais espaços sociais (o fora) com uma visão desinstitucionalizante e com o objetivo de auxiliar os sujeitos a ressignificarem seu lugar social.

Genotyping of Mycobacterium tuberculosis isolates from alow-endemic setting in northwestern state of Paraná in Southern Brazil

The purpose of this study was to provide information about the genetic diversity and prevalent genotype of Mycobacterium tuberculosis in a low-endemic setting in northwestern state of Paraná in Southern Brazil. We employed spoligotyping and mycobacterial interspersed repetitive units-variable number tandem repeat (MIRU-VNTR) techniques to genotype M. tuberculosisisolates from patients with pulmonary tuberculosis (TB). The 93 isolates analyzed by spoligotyping were divided into 36 different patterns, 30 of which were described in the SITVIT database. Latin American and Mediterranean, Haarlem and T families were responsible for 26.9%, 17.2% and 11.8% of TB cases, respectively. From the 84 isolates analyzed by MIRU-VNTR, 58 shared a unique pattern and the remaining 26 belonged to nine clusters. The MIRU loci 40, 23, 10 and 16 were the most discriminatory. A combination of MIRU-VNTR and spoligotyping resulted in 85.7% discriminatory power (Hunter-Gaston index = 0.995). Thus, combining spoligotyping and MIRU-VNTR typing proved to be most useful for epidemiological study in this low-endemic setting in Southern Brazil. The current study demonstrated that there is significant diversity in circulating strains in the city of Maringá and the surrounding regions, with no single genotype of M. tuberculosispredominating.

Setting the preheating and steady-state operation of electronic ballasts, considering electrodes of hot-cathode fluorescent lamps

This paper presents a new methodology for the adjustment of the preheating process and steady-state operation of electronic ballasts intended for hot-cathode fluorescent lamps. The classical series-resonant parallel-loaded half-bridge inverter is the power stage analyzed in this paper. In addition, the preheating process is based on the imposition of a constant rms current through the electrodes, in order to provide a proper value of the R-h/R-c ratio before the lamp start. According to the proposed methodology, it is possible to set suitable operating points for, the electronic ballast, considering optimal conditions for the lamps electrodes. Therefore, the proposed methodology for setting the preheating and steady-state operation is a complete platform to the design of electronic ballasts for hot-cathode fluorescent lamps.

Setting time and thermal expansion of two endodontic cements

The purpose of this study was to evaluate the setting time and the thermal expansion coefficient of 2 endodontic cements, MTA-Angelus and a novel cement called CER. The setting time was determined in accordance to ANSI/ADA specifications no. 57. Three samples of 10 mm diameter and 2 mm thickness were prepared for each cement. The thermal expansion measurements were performed by strain gauge technique. Four samples of each cement were prepared using silicone rings of 5 mm diameter and 2 mm thickness. The data were analyzed statistically using the Student t test. The setting time obtained for the MTA-Angelus and CER cements was 15 (SD 1) min and 7 (SD 1) min, respectively. The linear coefficient of thermal expansion was 8.86 (SD 0.28) mu strain/degrees C for MTA-Angelus and 11.76 (SD 1.20) mu strain/degrees C for CER. The statistical analysis showed significant difference (P < .05) in the setting time and linear coefficient of thermal expansion between the 2 cements. The CER cement has a coefficient of expansion similar to dentin, which could contribute to a decrease of microleakage degree.

Influence of Hydatidiform Mole Follow-Up Setting on Postmolar Gestational Trophoblastic Neoplasia Outcomes A Cohort Study

OBJECTIVE: To assess the influence of hydatidiform mole (HM) management setting (reference center versus other institutions) on gestational trophoblastic neoplasia (GTN) outcomes. METHODS: This cohort study included 270 HM patients attending Botucatu Trophoblastic Diseases Center (BTDC, São Paulo State University, Brazil) between January 1.990 and December 2009 (204 undergoing evacuation and entire postmolar follow-up at BTDC and 66 from other institutions [OIs]). GTN characteristics and outcomes were analyzed and compared according to HM management setting. The confounding variables assessed included age, gravidity, parity, number of abortions and HM type (complete or partial). Postmolar GTN outcomes were compared using Mann-Whitney's test, chi(2) test or Fisher's exact test.RESULTS: Postmolar GTN occurred in 34 (34/204= 16.7%) BTDC patients and in 27 (27/66=40.9%) of those initially treated in other institutions. BTDC patients showed lower metastasis rate (5.8% vs. 48%, p = 0.003) and lower median FIGO (2002) score (2.00 0.00, 3.001 vs. 4.00 [2.00, 7.00], p = 0.003]. Multiagent chemotherapy to treat postmolar GTN was required in 2 BTDC cases (5.9%) and in 8 OI cases (29.6%) (p = 0.017). Median time interval between molar evacuation and chemotherapy onset was shorter among BTDC patients (7.0 [6.0, 10.0] vs. 10.0[7.0, 16.0], p = 0.040). CONCLUSION: BTDC patients showed GTN characteristics indicative of better prognosis. This underscores the importance of GTD specialist centers. (J Reprod Med 2012;57:305-309)

Effect of Incorporation of Disinfectant Solutions on Setting Time, Linear Dimensional Stability, and Detail Reproduction in Dental Stone Casts

Purpose: The aim of this paper was to analyze the influence of incorporation of disinfectants during the cast die stone-setting time. Setting time, linear dimensional stability, and reproduction details on casts were measured.Materials and Methods: Die stone type IV specimens with disinfection solutions (sodium hypochlorite 1%, glutaraldehyde 2%, chlorhexidine 2%) were incorporated in two concentrations (50%, 100%). The detail reproduction, dimensional stability, and setting time were tested in accordance with ADA recommendations.Results: Disinfecting solutions promoted an increase in setting time compared to control; sodium hypochlorite was responsible for the highest setting time. The addition of undiluted sodium hypochlorite 1.0% led to contraction during setting, but the groups with 50% diluted sodium hypochlorite 1.0% and undiluted chlorhexidine 2.0% resulted in intermediate values compared to the other groups, thus matching the control. The others did not demonstrate any effect on expansion. For detail reproduction, it was observed that the control group presented results similar to the others, except those where sodium hypochlorite was added.Conclusions The addition of sodium hypochlorite in both dilutions significantly altered, negatively, all the evaluated properties. But the addition of glutaraldehyde and chlorhexidine did not promote any significant alterations in the evaluated properties.

pH, Calcium Ion Release, and Setting Time of an Experimental Mineral Trioxide Aggregate-based Root Canal Sealer

Introduction: An experimental mineral trioxide aggregate sealer (MTAS) has been developed for use as a root canal sealer. The aim of this study was to evaluate the setting time, pH, and calcium ion release of MTAS compared with white Portland cement (CPB-40; Votorantin Cimentos, Camargo Correa SA, Pedro Leopoldo, MG, Brazil), white MTA Angelus (MTA; Angelus, Londrina, PR, Brazil), and AH Plus (Dentsply DeTrey, Konstanz, Germany). Methods: For the evaluation of setting time, each material was analyzed using Gilmore-type needles. Polyethylene tubes with the materials were immersed in distilled water for the measurement of pH (digital pH meter) and calcium release (atomic absorption spectrophotometry). The evaluations were performed at 3, 6, 12, 24, and 48 hours and 7, 14, and 28 days. Data were analyzed by analysis of variance and the Tukey test at 5% significance level. Results: MTAS showed higher calcium release at all experimental periods, a greater increase in pH up to 48 hours and the longest setting time. Conclusions: MTAS presented favorable properties for its indication as a root canal sealer. (J Endod 2011;37:844-846)

The Influence of Calcium Chloride on the Setting Time, Solubility, Disintegration, and pH of Mineral Trioxide Aggregate and White Portland Cement with a Radiopacifier

This study evaluated the influence of addition of 10% calcium chloride (CaCl(2)) on the setting time, solubility, disintegration, and pH of white MTA (WMTA) and white Portland cement (WPC). A test of the setting time was performed following the #57 ADA specifications and a test of the final setting time according to the ASTM. For the solubility tests disintegration and pH, Teflon rings were filled with the cements and weighed after setting. After 24 h in a desiccator, they were once again weighed. Thereafter, they were immersed in MiliQ water for 24 and 72 h and 7, 14, and 28 days, with maintenance in the desiccator and weighing between periods. The pH of water in which the rings were immersed was measured immediately after contact with them and in the other periods. The addition of CaCl(2) provided a significant reduction (50%) in the initial setting time of cements. The final setting time of WMTA was reduced in 35.5% and the final setting time of WPC in 68.5%. The WMTA with CaCl(2) absorbed water and gained weight with time, except for in the 24-h period. The addition of CaCl(2) to the WPC reduced its solubility. The addition of CaCl(2) increased the pH of WMTA in the immediate period and at 24 and 72 h and for WPC in the immediate period and at 24 h. The addition of CaCl(2) to WMTA and WPC reduced the setting times and solubility of both and increased the pH of cements in the initial periods. (J Endod 2009;35:550-554)

High-pressure granulites from Carire, Borborema Province, NE Brazil: Tectonic setting, metamorphic conditions and U-Pb, Lu-Hf and Sm-Nd geochronology

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of a double-setting alpha-tricalcium phosphate cement in eviscerated rabbit eyes

Purpose: To evaluate the macroscopy, microstructure, and tissue reaction of a double-setting a-tricalcium phosphate bone cement used as an intraocular implant in rabbits.Methods: the internal and external surface of the double-setting a-tricalcium phosphate implant was analyzed macroscopically and by scanning electron microscopy. Twelve New Zealand rabbits received 12-mm implants made of double-setting alpha-tricalcium phosphate cement after unilateral evisceration. Clinical evaluation was performed daily for the first 15 days after surgery and at 15-day intervals until the end of the study period. For histopathologic analysis, 3 animals per experimental period were submitted to enucleation at 15, 45, 90, and 180 days.Results: on gross inspection, the external surface of the implant was solid, smooth, and compact. The microarchitecture was characterized by the formation of columns of hexagonal crystals with interconnecting channels forming micropores. No wound dehiscence, signs of infection, or implant extrusion were observed in any animal throughout the study period. Histologic examination revealed the formation of fibrovascular tissue surrounding the implants, and there were signs of minimal integration of the surface limiting the fibrocellular cap with the space previously occupied by the implant.Conclusions: the double-setting alpha-tricalcium phosphate implant behaved as an inert and nonintegratable material. The lack of incorporation of this material by fibrovascular tissue is related to its characteristics of compactness and high resistance.

Evaluation of the thermal shrinkage of titanium and the setting and thermal expansion of phosphate-boded investments

Statement of problem. There are few studies on titanium casting shrinkage, and phosphate-bonded investments for titanium casting have not produced appropriate marginal fit.Purpose. The purpose of this study was to determine the thermal shrinkage of titanium and the setting and thermal expansion of 3 phosphate-bonded investments.Material and methods. The thermal shrinkage between the melting temperature and room temperature was calculated using a titanium thermal expansion coefficient. The thermal and setting expansion were measured for 3 phosphate bonded investments: Rematitan Plus (RP) specific for titanium, Rema Exakt (RE), and Castorit Super C (CA), using different special liquid concentrations (100%, 75%, and 50%). Setting expansion was measured for cylindrical specimens 50 mm long x 8 mm in diameter with a transducer. The heating and cooling curves were obtained with a dilatometer (DIL 402 PC). The total expansion curve was drawn using software, and temperatures to obtain expansion equivalent to titanium casting shrinkage were determined (n=5). In addition, the total expansion of the control group (RP at 430 degrees C) was measured, as well as the temperatures at which the other groups achieved equivalent total expansion (n=5). Data were analyzed by 1-way ANOVA and the Tukey HSD test (alpha=.05).Results. Titanium casting shrinkage was estimated as 1.55%. RP did not achieve this expansion. RE achieved expansion of 1.55% only with a special liquid concentration of 100% at 594 degrees C. CA with all special liquid concentrations attained this expansion (351 degrees C to 572 degrees C). Total expansion of the control group was 0.86%, and the other groups reached that expansion within the range of 70 degrees C to 360 degrees C.Conclusions. Only RE and CA demonstrated sufficient expansion to compensate for titanium casting shrinkage. All groups reached total expansion equivalent to that of the control group at significantly lower temperatures.