Workers’ UV exposure and the subsequent impact on skin

Introduction: Excessive exposure to ultraviolet (UV) radiation from sunlight is a causative factor in the development of skin damage and skin cancer. Little research has been undertaken into assessing the sun exposure linking to skin damage inside buildings or behind window glass. This project directly addressed this issue by aiming to assess the role that UV exposure has on skin damage for indoor workers and drivers. Methods: Measurements of personal UV exposure using UV sensitive polymer dosimeters were undertaken of 41 indoor workers and 3 professional drivers. Physical measurements of skin characteristics including skin pigmentation and UV induced skin photoaging were also determined. In addition, demographic information along with phenotypic characteristics, sun exposure and sun protection practice history, and history of skin damage were assessed through a questionnaire. Results: Indoor workers typically received low doses of UV radiation. However, one driver received a high dose (13J/cm2 UVA and 4.99 MED UVB on the arm). Age and years residing in Australia had a positive correlation with UV induced skin pigmentation. The number of major sunburns before 18 years was a risk factor for skin damage in adults. Those participants with fair skin, non-black hair and blue/green /blue-grey eye were more likely to have skin damage related to sun exposure. Conclusions: A person’s age, years residing in Australia, numbers of major sunburn, skin colour, hair colour and eye colour are important factors associated with the development of sun-related skin damage in workers. ‘Real World’ implications: 1. The number of major sunburns before 18 years was a risk factor for skin damage in adults. This clearly confirms the importance of early prevention. To protect the skin from extensive sun exposure for your generation should have significance for further prevention of skin damage. 2. It is unsurprising that age and years residing in Australia were associated with skin damage related UV radiation. Therefore, the general public should reinforce their sun protective measures and check skin regularly. 3. Drivers should take sun protective measures during their working hours between sunrise and sunset.

Ions in motor vehicle exhaust and their dispersion near busy roads

Measurements in the exhaust plume of a petrol-driven motor car showed that molecular cluster ions of both signs were present in approximately equal amounts. The emission rate increased sharply with engine speed while the charge symmetry remained unchanged. Measurements at the kerbside of nine motorways and five city roads showed that the mean total cluster ion concentration near city roads (603 cm-3) was about one-half of that near motorways (1211 cm-3) and about twice as high as that in the urban background (269 cm-3). Both positive and negative ion concentrations near a motorway showed a significant linear increase with traffic density (R2=0.3 at p<0.05) and correlated well with each other in real time (R2=0.87 at p<0.01). Heavy duty diesel vehicles comprised the main source of ions near busy roads. Measurements were conducted as a function of downwind distance from two motorways carrying around 120-150 vehicles per minute. Total traffic-related cluster ion concentrations decreased rapidly with distance, falling by one-half from the closest approach of 2m to 5m of the kerb. Measured concentrations decreased to background at about 15m from the kerb when the wind speed was 1.3 m s-1, this distance being greater at higher wind speed. The number and net charge concentrations of aerosol particles were also measured. Unlike particles that were carried downwind to distances of a few hundred metres, cluster ions emitted by motor vehicles were not present at more than a few tens of metres from the road.

Real-time simulation for power systems based on parallel computing - an empirical study

Abstract Computer simulation is a versatile and commonly used tool for the design and evaluation of systems with different degrees of complexity. Power distribution systems and electric railway network are areas for which computer simulations are being heavily applied. A dominant factor in evaluating the performance of a software simulator is its processing time, especially in the cases of real-time simulation. Parallel processing provides a viable mean to reduce the computing time and is therefore suitable for building real-time simulators. In this paper, we present different issues related to solving the power distribution system with parallel computing based on a multiple-CPU server and we will concentrate, in particular, on the speedup performance of such an approach.

Positive design and construction of mechanisms for the sustainable development in microenterprises in Africa

Enterprise development and its contribution to societal and economic outcomes are well known. However, limited research into microenterprises and the practices of microfinance and microcredit in developing countries has been carried out. This chapter presents the findings of research based on six years of engagement with the microentrepreneurs of Beira in Mozambique and suggests a model for responsible and sustainable support for enterprise development in developing economies. Building on semistructured interviews, observation, and participatory action research, this research project articulates a new approach supportive of enterprise development, as a process of cocreation with local people and based on sustainability principles. These findings are part of a longitudinal study of the successes and failures of small enterprises and their impact on social and economic activity.

Globalisation and corporate real estate strategies

Purpose: The purpose of this paper is to examine the impact of globalisation on corporate real estate strategies. Specifically, it seeks to identify corporate real estate capabilities that are important in a hypercompetitive business climate. ---------- Design/methodology/approach: This paper utilises a qualitative approach to analyse secondary data in order to identify the corporate real estate capabilities for a hypercompetitive business environment. ---------- Findings: Globalisation today is an undeniable phenomenon that is fundamentally changing the way business is conducted. In the light of global hypercompetition, corporate real estate needs to develop new capabilities to support global business strategies. These include flexibility, network organization and managerial learning capabilities. ---------- Research limitations/implications: This is a conceptual paper and future empirical research needs to be conducted to verify the propositions made in this paper. ---------- Practical implications: Given the new level of uncertainty in the business climate, that is, hypercompetition, businesses need to develop dynamic capabilities that are harder for competitors to imitate in order to maintain what is considered a “momentary” competitive advantage. The findings of this paper are useful to guide corporate real estate managers in this regard. ---------- Originality/value:– This paper is original in two ways. First, it applies the strategic management concept of capabilities to corporate real estate. Second, it links the key challenge that businesses face today, i.e. globalisation, to the concept of capabilities as a means to maintain competitive advantage.

Connecting people and resource consumption in real time

The authors currently engage in two projects to improve human-computer interaction (HCI) designs that can help conserve resources. The projects explore motivation and persuasion strategies relevant to ubiquitous computing systems that bring real-time consumption data into the homes and hands of residents in Brisbane, Australia. The first project seeks to increase understanding among university staff of the tangible and negative effects that excessive printing has on the workplace and local environment. The second project seeks to shift attitudes toward domestic energy conservation through software and hardware that monitor real-time, in situ electricity consumption in homes across Queensland. The insights drawn from these projects will help develop resource consumption user archetypes, providing a framework linking people to differing interface design requirements.

Health risk from the use of roof-harvested rainwater in Southeast Queensland, Australia, as potable or nonpotable water, determined using quantitative microbial risk assessment

A total of 214 rainwater samples from 82 tanks were collected in urban Southeast Queensland (SEQ) in Australia and analysed for the zoonotic bacterial and protozoan pathogen using real-time binary PCR and quantitative PCR (qPCR). Quantitative Microbial Risk Assessment (QMRA) analysis was used to quantify the risk of infection associated with the exposure to potential pathogens from potable and non-potable uses of roof-harvested rainwater. Of the 214 samples tested, 10.7%, 9.8%, and 5.6%, and 0.4% samples were positive for Salmonella invA, Giardia lamblia β-giardin , Legionella pneumophila mip, and Campylobacter jejuni mapA genes. Cryptosporidium parvum could not be detected. The estimated numbers of viable Salmonella spp., G. lamblia β-giradin, and L. pneumophila genes ranged from 1.6 × 101 to 9.5 × 101 cells, 1.4 × 10-1 to 9.0 × 10-1 cysts, and 1.5 × 101 to 4.3 × 101 per 1000 ml of water, respectively. Six risk scenarios were considered from exposure to Salmonella spp., G. lamblia and L. pneumophila. For Salmonella spp., and G. lamblia, these scenarios were: (1) liquid ingestion due to drinking of rainwater on a daily basis (2) accidental liquid ingestion due to garden hosing twice a week (3) aerosol ingestion due to showering on a daily basis, and (4) aerosol ingestion due to hosing twice a week. For L. pneumophila, these scenarios were: (5) aerosol inhalation due to showering on a daily basis, and (6) aerosol inhalation due to hosing twice a week. The risk of infection from Salmonella spp., G. lamblia, and L. pneumophila associated with the use of rainwater for showering and garden hosing was calculated to be well below the threshold value of one extra infection per 10,000 persons per year in urban SEQ. However, the risk of infection from ingesting Salmonella spp. and G. lamblia via drinking exceeds this threshold value, and indicates that if undisinfected rainwater were ingested by drinking, then the gastrointestinal diseases of Salmonellosis and Giardiasis is expected to range from 5.0 × 100 to 2.8 × 101 (Salmonellosis) and 1.0 × 101 to 6.4 × 101 (Giardiasis) cases per 10,000 persons per year, respectively. Since this health risk seems higher than that expected from the reported incidences of gastroenteritis, the assumptions used to estimate these infection risks are critically examined. Nonetheless, it would seem prudent to disinfect rainwater for potable use.

Real estate 2.0 : towards a value ecology?

This paper anatomises emerging developments in online community engagement in a major global industry: real estate. Economists argue that we are entering a ‘social network economy’ in which ‘complex social networks’ govern consumer choice and product value. In the light of this, organisations are shifting from thinking and behaving in the conventional ‘value chain’ model--in which exchanges between firms and customers are one-way only, from the firm to the consumer--to the ‘value ecology’ model, in which consumers and their networks become co-creators of the value of the product. This paper studies the way in which the global real estate industry is responding to this environment. This paper identifies three key areas in which online real estate ‘value ecology’ work is occurring: real estate social networks, games, and locative media / augmented reality applications. Uptake of real estate applications is, of course, user-driven: the paper not only highlights emerging innovations; it also identifies which of these innovations are actually being taken up by users, and the content contributed as a result. The paper thus provides a case study of one major industry’s shift into a web 2.0 communication model, focusing on emerging trends and issues.

The embodied hybrid space : designing ubiquitous computing towards an amplification of situated real world experiences

The emergence of mobile and ubiquitous computing technology has created what is often referred to as the hybrid space – a virtual layer of digital information and interaction opportunities that sit on top of and augment the physical environment. Embodied media materialise digital information as observable and sometimes interactive parts of the physical environment. The aim of this work is to explore ways to enhance people’s situated real world experience, and to find out what the role and impact of embodied media in achieving this goal can be. The Edge, an initiative of the State Library of Queensland in Brisbane, Australia, and case study of this thesis, envisions to be a physical place for people to meet, explore, experience, learn and teach each other creative practices in various areas related to digital technology and arts. Guided by an Action Research approach, this work applies Lefebvre’s triad of space (1991) to investigate the Edge as a social space from a conceived, perceived and lived point of view. Based on its creators’ vision and goals on the conceived level, different embodied media are iteratively designed, implemented and evaluated towards shaping and amplifying the Edge’s visitor experience on the perceived and lived level.

V2V/V2I augmented maps : state-of-the-art and contribution to real-time crash risk assessment

A number of advanced driver assistance systems (ADAS) are currently being released on the market, providing safety functions to the drivers such as collision avoidance, adaptive cruise control or enhanced night-vision. These systems however are inherently limited by their sensory range: they cannot gather information from outside this range, also called their “perceptive horizon”. Cooperative systems are a developing research avenue that aims at providing extended safety and comfort functionalities by introducing vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) wireless communications to the road actors. This paper presents the problematic of cooperative systems, their advantages and contributions to road safety and exposes some limitations related to market penetration, sensors accuracy and communications scalability. It explains the issues of how to implement extended perception, a central contribution of cooperative systems. The initial steps of an evaluation of data fusion architectures for extended perception are exposed.

A synthesizable hardware evolutionary algorithm design for unmanned aerial system real-time path planning

The main objective of this paper is to detail the development of a feasible hardware design based on Evolutionary Algorithms (EAs) to determine flight path planning for Unmanned Aerial Vehicles (UAVs) navigating terrain with obstacle boundaries. The design architecture includes the hardware implementation of Light Detection And Ranging (LiDAR) terrain and EA population memories within the hardware, as well as the EA search and evaluation algorithms used in the optimizing stage of path planning. A synthesisable Very-high-speed integrated circuit Hardware Description Language (VHDL) implementation of the design was developed, for realisation on a Field Programmable Gate Array (FPGA) platform. Simulation results show significant speedup compared with an equivalent software implementation written in C++, suggesting that the present approach is well suited for UAV real-time path planning applications.

Providing a law degree for the “real world” : perspective of an Australian law school

The Queensland University of Technology badges itself as “a university for the real world”. For the last decade the Law Faculty has aimed to provide its students with a ‘real world’ degree, that is, a practical law degree. This has seen skills such as research, advocacy and negotiation incorporated into the undergraduate degree under a University Teaching & Learning grant, a project that gained international recognition and praise. In 2007–2008 the Law Faculty undertook another curriculum review of its undergraduate law degree. As a result of the two year review, QUT’s undergraduate lawdegree has fewer core units, a focus on first year student transition, scaffolding of law graduate capabilities throughout the degree,work integrated learning and transition to the workplace. The revised degree commenced implementation in 2009. This paper focuses on the “real world” approach to the degree achieved through the first year programme, embedding and scaffolding law graduate capabilities through authentic and valid assessment and work integrated learning.

Who are the real “first offenders”?

Drink driving causes more fatal crashes than any other single factor on Australian roads, with a third of crashes having alcohol as a contributing factor. In recent years there has been a plateau in the numbers of drink drivers apprehended by RBT, and around 12% of the general population in self report surveys admit to drinking and driving. There is limited information about the first offender group, particularly the subgroup of these offenders who admit to prior drink driving, the offence therefore being the “first time caught”. This research focuses on the differences between those who report drink driving prior to apprehension for the offence and those who don’t. Methods: 201 first time drink driving offenders were interviewed at the time of their court appearance. Information was collected on socio-demographic variables, driving behaviour, method of apprehension, offence information, alcohol use and self reported previous drink driving. Results: 78% of respondents reported that they had driven over the legal alcohol limit in the 6 months prior to the offence. Analyses revealed that those offenders who had driven over the limit previously without being caught were more likely to be younger and have an issue with risky drinking. When all variables were taken into account in a multivariate model using logistic regression, only risky drinking emerged as significantly related to past drink driving. High risk drinkers were 4.8 times more likely to report having driven over the limit without being apprehended in the previous 6 months. Conclusion: The majority of first offenders are those who are “first time apprehended” rather than “first time drink drivers”. Having an understanding of the differences between these groups may alter the focus of educational or rehabilitation countermeasures. This research is part of a larger project aiming to target first time apprehended offenders for tailored intervention.

XML documents clustering using tensor space model - A preliminary study

A hierarchical structure is used to represent the content of the semi-structured documents such as XML and XHTML. The traditional Vector Space Model (VSM) is not sufficient to represent both the structure and the content of such web documents. Hence in this paper, we introduce a novel method of representing the XML documents in Tensor Space Model (TSM) and then utilize it for clustering. Empirical analysis shows that the proposed method is scalable for a real-life dataset as well as the factorized matrices produced from the proposed method helps to improve the quality of clusters due to the enriched document representation with both the structure and the content information.