Effects of solar UV radiation on morphology and photosynthesis of filamentous cyanobacterium Arthrospira platensis

To study the impact of solar UV radiation (UVR) (280 to 400 nm) on the filamentous cyanobacterium Arthrospira (Spirulina) platensis, we examined the morphological changes and photosynthetic performance using an indoor-grown strain (which had not been exposed to sunlight for decades) and an outdoor-grown strain (which had been grown under sunlight for decades) while they were cultured with three solar radiation treatments: PAB (photosynthetically active radiation [PAR] plus UVR; 280 to 700 nm), PA (PAR plus UV-A; 320 to 700 nm), and P (PAR only; 400 to 700 nm). Solar UVR broke the spiral filaments of A. platensis exposed to full solar radiation in short-term low-cell-density cultures. This breakage was observed after 2 h for the indoor strain but after 4 to 6 h for the outdoor strain. Filament breakage also occurred in the cultures exposed to PAR alone; however, the extent of breakage was less than that observed for filaments exposed to full solar radiation. The spiral filaments broke and compressed when high-cell-density cultures were exposed to full solar radiation during long-term experiments. When UV-B was screened off, the filaments initially broke, but they elongated and became loosely arranged later (i.e., there were fewer spirals per unit of filament length). When UVR was filtered out, the spiral structure hardly broke or became looser. Photosynthetic 0, evolution in the presence of UVR was significantly suppressed in the indoor strain compared to the outdoor strain. UVR-induced inhibition increased with exposure time, and it was significantly lower in the outdoor strain. The concentration of UV-absorbing compounds was low in both strains, and there was no significant change in the amount regardless of the radiation treatment, suggesting that these compounds were not effectively used as protection against solar UVR. Self-shading, on the other hand, produced by compression of the spirals over adaptive time scales, seems to play an important role in protecting this species against deleterious UVR. Our findings suggest that the increase in UV-B irradiance due to ozone depletion not only might affect photosynthesis but also might alter the morphological development of filamentous cyanobacteria during acclimation or over adaptive time scales.

Cognition from the bottom up: on biological inspiration, body morphology, and soft materials.

Traditionally, in cognitive science the emphasis is on studying cognition from a computational point of view. Studies in biologically inspired robotics and embodied intelligence, however, provide strong evidence that cognition cannot be analyzed and understood by looking at computational processes alone, but that physical system-environment interaction needs to be taken into account. In this opinion article, we review recent progress in cognitive developmental science and robotics, and expand the notion of embodiment to include soft materials and body morphology in the big picture. We argue that we need to build our understanding of cognition from the bottom up; that is, all the way from how our body is physically constructed.

Active sensing system with in situ adjustable sensor morphology.

BACKGROUND: Despite the widespread use of sensors in engineering systems like robots and automation systems, the common paradigm is to have fixed sensor morphology tailored to fulfill a specific application. On the other hand, robotic systems are expected to operate in ever more uncertain environments. In order to cope with the challenge, it is worthy of note that biological systems show the importance of suitable sensor morphology and active sensing capability to handle different kinds of sensing tasks with particular requirements. METHODOLOGY: This paper presents a robotics active sensing system which is able to adjust its sensor morphology in situ in order to sense different physical quantities with desirable sensing characteristics. The approach taken is to use thermoplastic adhesive material, i.e. Hot Melt Adhesive (HMA). It will be shown that the thermoplastic and thermoadhesive nature of HMA enables the system to repeatedly fabricate, attach and detach mechanical structures with a variety of shape and size to the robot end effector for sensing purposes. Via active sensing capability, the robotic system utilizes the structure to physically probe an unknown target object with suitable motion and transduce the arising physical stimuli into information usable by a camera as its only built-in sensor. CONCLUSIONS/SIGNIFICANCE: The efficacy of the proposed system is verified based on two results. Firstly, it is confirmed that suitable sensor morphology and active sensing capability enables the system to sense different physical quantities, i.e. softness and temperature, with desirable sensing characteristics. Secondly, given tasks of discriminating two visually indistinguishable objects with respect to softness and temperature, it is confirmed that the proposed robotic system is able to autonomously accomplish them. The way the results motivate new research directions which focus on in situ adjustment of sensor morphology will also be discussed.

Differential expression of vasa RNA and protein during spermatogenesis and oogenesis in the gibel carp (Carassius auratus gibelio), a bisexually and gynogenetically reproducing vertebrate

The RNA helicase Vasa is a germ cell marker in animals, and its homolog in vertebrates to date has been limited to bisexual reproduction. We cloned and characterized CagVasa, a Vasa homolog from the gibel carp, a fish that reproduces bisexually or gynogenetically. CagVasa possesses 14 RGG repeats and eight conserved motifs of Vasa proteins. In bisexually reproducing gibel carp, vasa is maternally supplied and its zygotic expression is restricted to gonads. By in situ hybridization on testicular sections, vasa is low in spermatogonia, high in primary spermatocytes, reduced in secondary spermatocytes, but disappears in spermatids and sperm. In contrast, vasa persists throughout oogenesis, displaying low-high-low levels from oogonia over vitellogenic oocytes to maturing oocytes. A rabbit anti-Vasa antibody (alpha Vasa) was raised against the N-terminal CagVasa for fluorescent immunohistochemistry. On testicular sections, Vasa is the highest in spermatogonia, reduced in spermatocytes, low in spermatids, and absent in sperm. In the ovary, Vasa is the highest in oogonia but persists throughout oogenesis. Subcellular localization of vasa and its protein changes dynamically during oogenesis. The aVasa stains putative primordial germ cells in gibel carp fry. It detects gonadal germ cells also in several other teleosts. Therefore, Cagvasa encodes a Vasa ortholog that is differentially expressed in the testis and ovary. Interestingly, the alpha Vasa in combination with a nuclear dye can differentiate critical stages of spermatogenesis and oogenesis in fish. The cross-reactivity and the ability to stain stage-specific germ cells make this antibody a useful tool to identify fish germ cell development and differentiation. (c) 2005 Wiley-Liss, Inc.

Morphology, biometry and distribution of Difflugia biwae Kawamura, 1918 (Protozoa : Rhizopoda)

The freshwater testate amoeba Difflugia biwae Kawamura, 1918, isolated from Mulan Lake, Hubei Province, China is investigated using light microscopy and scanning electron microscopy. The morphology, biometry and distribution of this little known species are supplied. After careful comparison with three other similar species, including D. delicatula Gauthier-Livre et Thomas, D. elegans Penard and D. oblonga caudata Stepanek, we believe that the characteristics of smooth fusiform shell, conspicuous great collar flare (always larger than body-width) around the aperture, constriction behind the aperture and a somewhat curved aboral horn set D. biwae apart from all other Difflugia species. This species shows a great diversity in total length, collar height and aboral horn length which have high variability (CV between 11.76 and 24.52). However, body width, collar diameter, neck width, body length and aperture diameter are fairly constant with low variability (CV between 5.34 and 8.79) which shows a remarkable uniformity of D. biwae. Also, the size frequency distributions of both body width and body length yield bell-shaped (normally distributed) curves and indicate that D. biwae is a size-monomorphic species, characterized by a main-size class and a small size range. D. biwae is probably endemic to East Asia (China and Japan) because it has such a large size (165-306 mu m) that it would have been easily found in Europe and North America, if it were there. Consequently, D. biwae must have a restricted geographical distribution, disproving the old hypothesis that microscopic organisms are cosmopolitan.

New data on the morphology and systematic status of Spinitectus petrowi and Spinitectus gigi (Nematoda : Cystidicolidae) parasitic in catfishes in central China

Two little-known nematode species of the genus Spinitectus Fourment, 1883, S. petrowi Belous, 1965 (prevalence 25%, intensity 1-8) and S. gigi Fujita, 1927 (prevalence 10%, intensity 2-3), were collected from the gastrointestinal tract of the yellow catfish, Pelteobagrus fulvidraco (Richardson), from Liangzihu Lake, Hubei Province, central China, in September of 2002. The light and scanning electron microscopical examination of this material, supplemented by a few museum specimens of S. gigi collected from the catfish Clarias fuscus (Lacepede) in southern China, made it possible to study in detail the morphology of these parasite species and to redescribe them. The first species, whose correct name is S. petrowi Belous, 1965, exhibits some morphological features (e.g., unusually short vestibule, shape of pseudolabia and of the left spicule) not found in most other congeners; a unique feature is the presence of peculiar pairs of transversely oriented peg-like cuticular spines with rounded ends on the ventral surface of the female tail. Spinitectus gigi was found to have 28-31 cuticular spines in the first ring, relatively long distances between the 2nd-7th rings of spines, and anterior rings divided into 2 sectors; the excretory pore is located at the level of the 4th ring of cuticular spines; males posses 4 pairs of preanal- and 6 pairs of postanal caudal papillae and a pair of small phasmids. Spinitectus bagri Wang, Wu et Yu, 1993 and S. wulingensis Yu et Wang, 1997 are considered junior synonyms of S. petrowi, whereas S. clariasi Ky, 1971, S. ophicephali Ky, 1971 and S. yuanjiangensis Wang, Wit et Yu, 1997 are regarded to be junior synonyms of S. gigi. Spinitectus petrowi was not previously reported from China.

Establishment of a normal medakafish spermatogonial cell line capable of sperm production in vitro

Spermatogonia are the male germ stem cells that continuously produce sperm for the next generation. Spermatogenesis is a complicated process that proceeds through mitotic phase of stem cell renewal and differentiation, meiotic phase, and postmeiotic phase of spermiogenesis. Full recapitulation of spermatogenesis in vitro has been impossible, as generation of normal spermatogonial stem cell lines without immortalization and production of motile sperm from these cells after long-term culture have not been achieved. Here we report the derivation of a normal spermatogonial cell line from a mature medakafish testis without immortalization. After 140 passages during 2 years of culture, this cell line retains stable but growth factor-dependent proliferation, a diploid karyotype, and the phenotype and gene expression pattern of spermatogonial stem cells. Furthermore, we show that this cell line can undergo meiosis and spermiogenesis to generate motile sperm. Therefore, the ability of continuous proliferation and sperm production in culture is an intrinsic property of medaka spermatogonial stem cells, and immortalization apparently is not necessary to derive male germ cell cultures. Our findings and cell line will offer a unique opportunity to study and recapitulate spermatogenesis in vitro and to develop approaches for germ-line transmission.

Comparative studies on in vitro sperm decondensation and pronucleus formation in egg extracts between gynogenetic and bisexual fish

A cell-free system based upon the egg extracts from gynogenetic gibel carp (Carassius auratus gibelio) or bisexual red common carp (Cyprinus carpio red variety) was developed to investigate developmental behaviors of the demembranated sperm nuclei. Both red common carp and gibel carp sperm nuclei could decondense fully and form pronuclei in the red common carp egg extracts. Gibel carp sperm nuclei could also decondense fully and form pronuclei in the gibel carp egg extracts, but red common carp sperm nuclei could not decondense sufficiently in the same extracts. The significant differences of morphological changes were further confirmed by ultrastructural. observation of transmission electron microscopy. The data further offer cytological evidence for gonochoristic reproduction in the gynogenetically reproducing gibel carp. In addition, the sperm nuclei in vitro decondensation is dependent on the pH in the extracts, and the decondensed efficiency is optimal at pH 7. However, no DNA replication was observed in the two kinds of egg extracts during the incubation period of the sperm nuclei. It is suggested that the egg extracts prepared from the gynogenetic gibel carp should be a valid in vitro system for studying molecular mechanism on gynogenesis and reproduction mode diversity in fish.

Taxonomic re-evaluation of Aphanizomenon flos-aquae NH-5 based on morphology and 16S rRNA gene sequences

The taxonomy of Aphanizomenon flos-aquae strain NH-5, a producer of cyanotoxins, was re-evaluated by comparison with six other Aphanizomenon strains using morphological characteristics and 16S rRNA gene sequences. Strain NH-5 was concluded to be improperly identified as Aph. flos-aquae based upon (1) lack of bundle formation in the trichomes, (2) location of akinetes next to heterocytes, (3) lower similarities (less than 97.5%) in the 16S rRNA gene sequences relative to Aph. flos-aquae strains, and (4) comparison within a phylogenetic tree constructed from 16S rRNA gene sequences. The Aphanizomenon strains investigated in this study are classified to four morphological groups as described by the classical taxonomy of Komarek & Kovacik (1989). This classification was supported from the phylogenetic results of 16S rRNA gene sequences. This study also discusses the generic boundaries between Aphanizomenon and Anabaena.

STUDY ON THE MODE OF PRIMARY CONTROL IN THE EGG OF GYNOGENETIC CRUCIAN CARP FOR INHIBITING THE DEVELOPMENT OF 2 TYPES OF SPERM NUCLEI

By comparing the different developmental characteristics of two types of sperm nuclei which were from gynogenetic fish (crucian carp) and amphimictic fishes (red carp, red goldfish and sex-reversal red carp) respectively in the eggs of gynogenetic crucian carp, it was preliminarily revealed that there existed selective inhibiting actions of the primary control in the eggs of crucian carp for inhibiting the development of the two types of sperm nuclei. To homologous sperms, the primary control showed weak effect, thus leading to the decondensation of homologous sperm nuclei at different degrees in the eggs of crucian carp. But to heterologous sperms, the primary control showed strong effects, resulting in the total inhibition of the development of heterologous sperm nuclei. Moreover, our experimental results also showed that the different developmental behavior of the two types of sperm nuclei might have a great relationship to the changes of the sex ratio in the population of gynogenetic crucian carp. The infiltration of "the genetic materials in sperm nuclei" into the female nucleus at random might play an important role in male emergence in the naturally gynogenetic population of crucian carp.

Effects of the morphology of ZnO/Ag interface on the surface-plasmon-enhanced emission of ZnO films

The effects of the surface morphology of Ag on the surface-plasmon-enhanced emission of ZnO films have been studied for a ZnO/Ag/Si system by photoluminescence spectroscopy and atomic force microscopy. The results indicate that the enhancement of ZnO ultraviolet emission is dependent on the deposition conditions of the Ag interlayers. By examining the dependence of the enhancement ratio of surface-plasmon-mediated emission on the characteristic parameters of Ag surface morphology, we found that the surface plasmon coupling to light is determined by both the Ag particle size and density.

A simple route of morphology control and structural and optical properties of ZnO grown by metal-organic chemical vapour deposition

Employing the metal-organic chemical vapour deposition (MOCVD) technique, we prepare ZnO samples with different morphologies from the film to nanorods through conveniently changing the bubbled diethylzinc flux (BDF) and the carrier gas flux of oxygen (OCGF). The scanning electron microscope images indicate that small BDF and OCGF induce two-dimensional growth while the large ones avail quasi-one-dimensional growth. X-ray diffraction (XRD) and Raman scattering analyses show that all of the morphology-dependent ZnO samples are of high crystal quality with a c-axis orientation. From the precise shifts of the 2 theta. locations of ZnO (002) face in the XRD patterns and the E-2(high) locations in the Raman spectra, we deduce that the compressive stress forms in the ZnO samples and is strengthened with the increasing BDF and OCGF. Photoluminescence spectroscopy results show all the samples have a sharp ultraviolet luminescent band without any defects-related emission. Upon the experiments a possible growth mechanism is proposed.

Using different carrier gases to control AlN film stress and the effect on morphology, structural properties and optical properties

On the metalorganic chemical vapour deposition growth of AlN, by adjusting H-2+N-2 mixture gas components, we can gradually control island dimension. During the Volmer - Weber growth, the 2-dimensional coalescence of the islands induces an intrinsic tensile stress. Then, this process can control the in-plane stress: with the N-2 content increasing from 0 to 3 slm, the in-plane stress gradually changes from 1.5 GPa tensile stress to - 1.2GPa compressive stress. Especially, with the 0.5 slm N-2 + 2.5 slm H-2 mixture gas, the in-plane stress is only 0.1 GPa, which is close to the complete relaxation state. Under this condition, this sample has good crystal and optical qualities.

The structure, morphology and Raman scattering study on Mn-implanted nonpolar a-plane GaN films

Dilute magnetic nonpolar GaN films with a Curie temperature above room temperature have been fabricated by implanting Mn ions into unintentionally doped nonpolar a-plane (1 1 (2) over bar 0) GaN films and a subsequent rapid thermal annealing (RTA) process. The impact of the implantation and RTA on the structure and morphology of the nonpolar GaN films is studied in this paper. The scanning electron microscopy analysis shows that the RTA process can effectively recover the implantation-indUced damage to the surface morphology of the sample. The X-ray diffraction and micro-Raman scattering spectroscopy analyses show that the RTA process can just partially recover the implantation-induced crystal deterioration. Therefore, the quality of the Mn-implanted nonpolar GaN films should be improved further for the application in spintronic devices. (C) 2009 Elsevier B.V. All rights reserved.