Quantificação de enterobactérias e Clostridium spp. e detecção molecular de Clostridium perfringens, Escherichia coli e Salmonella spp. em pontos de cadeia produtiva da carne de frango

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Algoritmo neurogenético com vistas para o planejamento de rotas de robôs móveis autônomos

Pós-graduação em Ciência da Computação - IBILCE

Identified Hadron Compositions in p plus p and Au plus Au Collisions at High Transverse Momenta at root s(NN)=200 GeV

We report transverse momentum (p(T) <= 15 GeV/c) spectra of pi(+/-), K-+/-, p, (p) over bar, K-0(S), and rho(0) at midrapidity in p + p and Au + Au collisions at root s(NN) = 200 GeV. Perturbative QCD calculations are consistent with pi(+/-) spectra in p + p collisions but do not reproduce K and p((p) over bar) spectra. The observed decreasing antiparticle-to-particle ratios with increasing p(T) provide experimental evidence for varying quark and gluon jet contributions to high-p(T) hadron yields. The relative hadron abundances in Au + Au at p(T) >= 8 GeV/c are measured to be similar to the p + p results, despite the expected Casimir effect for parton energy loss.

Strangeness Enhancement in Cu-Cu and Au-Au Collisions at root s(NN)=200 GeV

We report new STAR measurements of midrapidity yields for the Lambda, (Lambda) over bar, K-S(0), Xi(-), (Xi) over bar (+), Omega(-), (Omega) over bar (+) particles in Cu + Cu collisions at root s(NN) = 200 GeV, and midrapidity yields for the Lambda, (Lambda) over bar, K-S(0) particles in Au + Au at root s(NN) = 200 GeV. We show that, at a given number of participating nucleons, the production of strange hadrons is higher in Cu + Cu collisions than in Au + Au collisions at the same center-of-mass energy. We find that aspects of the enhancement factors for all particles can be described by a parametrization based on the fraction of participants that undergo multiple collisions.

Neuropathology and behavioral impairments after three types of global ischemia surgery in Meriones unguiculatus: Evidence in motor cortex, hippocampal CA1 region and the neostriatum

The effects of three types of global ischemia by occlusion of carotid artery on motor and exploratory behaviors of Gerbils were evaluated by the Activity Cage and Rota rod tests. Animals were divided based on two surgical criteria: unilateral (UNI) or bilateral (BIL) carotid occlusion, with (REP) or without (OCL) reperfusion; and their behavior was evaluated on the fourth (4) or sixth (6) day. There was reduction of cell number in striatum, motor cortex M1 area, and hippocampal CA1 area in all groups in comparison to control animals. For M1 area and striatum, the largest reduction was observed in UNI6, UNI4, and BIL4 groups. Neuronal loss was also observed in CA1 area of BIL4 rodents. There was a decrease in crossings and rearings in all groups in activity cage test, compared to control. Reperfusion, unilateral and bilateral occlusion groups showed decrease in crossings. Only the BIL4 showed a decrease of rearing. In the Rota rod test, except the UNIOCL6, the groups showed a decrease in the balance in comparison to control. Both groups with REP4 showed a major decrease in balance. These findings suggest that both unilateral and bilateral carotid occlusions with reperfusion produce impairments of motor and exploratory behavior. (C) 2011 Elsevier B.V. All rights reserved.

Reliability in kimono grip strength tests and comparison between elite and non-elite Brazilian jiu-jitsu players

Background and Study Aim: The grip strength endurance is important for Brazilian Jiu-Jitsu (BJJ). Thus, the aims of this study were: a) to test the reliability of two kimono grip strength tests named maximum static lift (MSL) and maximum number of repetitions (MNR) and b) to examine differences between elite and non-elite BJJ players in these tests. Material/Methods: Thirty BJJ players participated into two phases: "A" to test reliability and "B" to compare elite and non-elite. In phase A, twenty participants performed the MSL and, 15 min later, the MNR in two occasions with 24-h interval. In phase B, ten other BJJ practitioners (non-elite) and ten athletes (elite) performed the same tests. The intraclass correlation coefficient (ICC) two way fixed model (3,1), Bland-Altman plot and the limits of agreement were used to test reliability, correlation between the tests were evaluated by Pearson correlations and independent T test (P<0.05) was utilized to compare elite vs. non-elite. Results: The ICC was high for repeated measurements on different days of phase A (MSL: r=0.99 and MNR: r=0.97). Limits of agreement for time of suspension were -6.9 to 2.4-s, with a mean difference of -2.3 s (CI: -3.3 to -1.2-s), while for number of repetitions the limits of agreement were -2.9 to 2.3-rep, with a mean difference of -0.3-rep (CI: -0.9 to 0.3-rep). In phase B, elite presented better performance for both tests (P<0.05) compared to non-elite (56 +/- 10-s vs. 37 +/- 11-s in MSL and 15 +/- 4-rep vs. 8 +/- 3-rep in MNR). Moderate correlation were found between MSL and MNR for absolute values during test (r=0.475; p=0.034), and retest phases (r=0.489; p=0.029), while moderate and high correlations in the test (r=0.615; p=0.004) and retest phases (r=0.716; p=0.001) were found for relative values, respectively. Conclusions: These proposed tests are reliable and both static and dynamic grip strength endurance tests seem to differentiate BJJ athletes from different levels.

Bacillus cereus infection outbreak in captive psittacines

This study reports an uncommon epizootic outbreak of Bacillus cereus that caused the sudden death of 12 psittacines belonging to the species Anodorhynchus hyacinthinus (1 individual), Diopsittaca nobilis (1 individual), Ara severe (1 individual) and Ara ararauna (9 individuals) in a Brazilian zoo. Post-mortem examination of the animals reveled extensive areas of lung hemorrhage, hepatic congestion, hemorrhagic enteritis and cardiac congestion. Histopathological examination of the organs showed the presence of multiple foci of vegetative cells of Gram-positive bacilli associated with discrete and moderate mononuclear inflammatory cell infiltrate. Seventeen B. cereus strains isolated from blood and sterile organs of nine A. ararauna were analyzed in order to investigate the genetic diversity (assessed by Rep-PCR) and toxigenic profiles (presence of hblA, hblC and hblD; nheA, nheB and nheC as well as cytK, ces and entFM genes) of such strains. Amplification of genomic DNA by Rep-PCR of B. cereus strains generated two closely related profiles (Rep-PCR types A and B) with three bands of difference. All strains were classified as belonging to the toxigenic profile I which contained HBL and NHE gene complexes, entFM and cytK genes. Altogether, microbiological and histopathological findings and the evidence provided by the success of the antibiotic prophylaxis, corroborate that B. cereus was the causative agent of the infection that killed the birds. (C) 2012 Elsevier B.V. All rights reserved.

Seminario Internacional, la publicación de artículos científicos, del ámbito de las actividades físicas y deportivas, en revistas indexadas y con factor de impacto

[ES] Se debatió sobre las situación actual de las publicaciones científicas en España del ámbito de la educación física y del deporte. También se debatió del papel de los investigadores y su producción. Contiene: Inauguración del Seminario Análisis de las revistas españolas de Ciencias de la actividad física y el deporte. El caso Apunts/Javier Olivera Beltrán. Publicación de artículos científicos en revistas especializadas relacionadas con el entrenamiento deportivo/Juan Manuel García. Los contenidos y estructura de la revista "Acción motriz"/José Hernández Moreno y Antonio González Molina. Revista Internacional de Medicina y Ciencias de la Actividad Física y el Deporte/ Vicente Martínez de Haro. Publicar en revistas especializadas del ámbito de la Educación Física y Deportiva/José Devís Devís. El camino hacia la evaluación de las revistas científicas españolas en E.F y Deportes/ Julio A. Martínez Morilla. Incorp Tecn de Red de Trab a través de Rep Inst en Rev de la Act Fís y Dep: Proy JHPE/José Pérez Turpín, Juan Chinchilla Mira. How to get a paper published in EPER... and other English-speaking (Impact Factor) journals/Ken Green. Conclusiones del Seminario.

Processo biotecnologico a cellule immobilizzate per la produzione di acidi grassi volatili da acque di vegetazione

Le acque di vegetazione (AV) costituiscono un serio problema di carattere ambientale, sia a causa della loro elevata produzione sia per l’ elevato contenuto di COD che oscilla fra 50 e 150 g/l. Le AV sono considerate un refluo a tasso inquinante fra i più elevati nell’ambito dell’industria agroalimentare e la loro tossicità è determinata in massima parte dalla componente fenolica. Il presente lavoro si propone di studiare e ottimizzare un processo non solo di smaltimento di tale refluo ma anche di una sua valorizzazione, utlizzandolo come materia prima per la produzione di acidi grassi e quindi di PHA, polimeri biodegradabili utilizzabili in varie applicazioni. A tale scopo sono stati utilizzati due bioreattori anaerobici a biomassa adesa, di identica configurazione, con cui si sono condotti due esperimenti in continuo a diverse temperature e carichi organici al fine di studiare l’influenza di tali parametri sul processo. Il primo esperimento è stato condotto a 35°C e carico organico pari a 12,39 g/Ld, il secondo a 25°C e carico organico pari a 8,40 g/Ld. Si è scelto di allestire e mettere in opera un processo a cellule immobilizzate in quanto questa tecnologia si è rivelata vantaggiosa nel trattamento continuo di reflui ad alto contenuto di COD e carichi variabili. Inoltre si è scelto di lavorare in continuo poiché tale condizione, per debiti tempi di ritenzione idraulica, consente di minimizzare la metanogenesi, mediata da microrganismi con basse velocità specifiche di crescita. Per costituire il letto fisso dei due reattori si sono utilizzati due diversi tipi di supporto, in modo da poter studiare anche l’influenza di tale parametro, in particolare si è fatto uso di carbone attivo granulare (GAC) e filtri ceramici Vukopor S10 (VS). Confrontando i risultati si è visto che la massima quantità di VFA prodotta nell’ambito del presente studio si ha nel VS mantenuto a 25°C: in tale condizione si arriva infatti ad un valore di VFA prodotti pari a 524,668 mgCOD/L. Inoltre l’effluente in uscita risulta più concentrato in termini di VFA rispetto a quello in entrata: nell’alimentazione la percentuale di materiale organico presente sottoforma di acidi grassi volatili era del 54 % e tale percentuale, in uscita dai reattori, ha raggiunto il 59 %. Il VS25 rappresenta anche la condizione in cui il COD degradato si è trasformato in percentuale minore a metano (2,35 %) e questo a prova del fatto che l’acidogenesi ha prevalso sulla metanogenesi. Anche nella condizione più favorevole alla produzione di VFA però, si è riusciti ad ottenere una loro concentrazione in uscita (3,43 g/L) inferiore rispetto a quella di tentativo (8,5 g/L di VFA) per il processo di produzione di PHA, sviluppato da un gruppo di ricerca dell’università “La Sapienza” di Roma, relativa ad un medium sintetico. Si può constatare che la modesta produzione di VFA non è dovuta all’eccessiva degradazione del COD, essendo questa nel VS25 appena pari al 6,23%, ma piuttosto è dovuta a una scarsa concentrazione di VFA in uscita. Questo è di buon auspicio nell’ottica di ottimizzare il processo migliorandone le prestazioni, poiché è possibile aumentare tale concentrazione aumentando la conversione di COD in VFA che nel VS25 è pari a solo 5,87%. Per aumentare tale valore si può agire su vari parametri, quali la temperatura e il carico organico. Si è visto che il processo di acidogenesi è favorito, per il VS, per basse temperature e alti carichi organici. Per quanto riguarda il reattore impaccato con carbone attivo la produzione di VFA è molto ridotta per tutti i valori di temperatura e carichi organici utilizzati. Si può quindi pensare a un’applicazione diversa di tale tipo di reattore, ad esempio per la produzione di metano e quindi di energia.

Ricostruzione degli sforzi in elementi finiti di piastra

Nell’ambito dell’analisi computazionale delle strutture il metodo degli elementi finiti è probabilmente uno dei metodi numerici più efficaci ed impiegati. La semplicità dell’idea di base del metodo e la relativa facilità con cui può essere implementato in codici di calcolo hanno reso possibile l’applicazione di questa tecnica computazionale in diversi settori, non solo dell’ingegneria strutturale, ma in generale della matematica applicata. Ma, nonostante il livello raggiunto dalle tecnologie ad elementi finiti sia già abbastanza elevato, per alcune applicazioni tipiche dell’ingegneria strutturale (problemi bidimensionali, analisi di lastre inflesse) le prestazioni fornite dagli elementi usualmente utilizzati, ovvero gli elementi di tipo compatibile, sono in effetti poco soddisfacenti. Vengono in aiuto perciò gli elementi finiti basati su formulazioni miste che da un lato presentano una più complessa formulazione, ma dall’altro consentono di prevenire alcuni problemi ricorrenti quali per esempio il fenomeno dello shear locking. Indipendentemente dai tipi di elementi finiti utilizzati, le quantità di interesse nell’ambito dell’ingegneria non sono gli spostamenti ma gli sforzi o più in generale le quantità derivate dagli spostamenti. Mentre i primi sono molto accurati, i secondi risultano discontinui e di qualità scadente. A valle di un calcolo FEM, negli ultimi anni, hanno preso piede procedure di post-processing in grado, partendo dalla soluzione agli elementi finiti, di ricostruire lo sforzo all’interno di patch di elementi rendendo quest’ultimo più accurato. Tali procedure prendono il nome di Procedure di Ricostruzione (Recovery Based Approaches). Le procedure di ricostruzione qui utilizzate risultano essere la REP (Recovery by Equilibrium in Patches) e la RCP (Recovery by Compatibility in Patches). L’obbiettivo che ci si prefigge in questo lavoro è quello di applicare le procedure di ricostruzione ad un esempio di piastra, discretizzato con vari tipi di elementi finiti, mettendone in luce i vantaggi in termini di migliore accurattezza e di maggiore convergenza.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

La escuela primaria de la minería en el Concejo de Aller (Asturias). Del primer franquismo al tardofranquismo: 1940-1975

[ES]Tras la derrota de la República española, la estructura educativa fue desmontada en toda España y sustituida por una escuela centrada en los valores religiosos y patrios propugnados por el régimen franquista. El libro de actas de la Junta Municipal de Educación Primaria de Aller es una fuente privilegiada, inédita hasta el momento, para analizar la organización educativa durante el extenso periodo analizado. Este documento atestigua asimismo la dimensión política franquista y tardofranquista y la situación socio-laboral, como evidencian los objetivos de este artículo. Dentro de los programas paternalistas, activos hasta 1970 inclusive, las compañías mineras ya habían creado centros escolares religiosos en Aller durante el primer cuarto del siglo XX. Sin embargo, la mayor parte de los hijos de los mineros recibieron su instrucción en las escuelas nacionales, afianzadas sobre los rígidos esquemas de obediencia y sumisión. La educación franquista se ha esforzado en perpetuar los cometidos sociales de niños y niñas por medio de una educación segregada y represiva.[EN]After the defeat of the Spanish Republic, rpublican educational structure in Spain was dismantled around the whole country and replaced by one focused on the religious and patriotic values espoused by the Franco regime. The minute book contains the local board’s agreements between 1940 and 1975, not only in terms of educational management, which are exposed along the aims of this article. The source used for this article, unpublished until now, has also facilitated the study of the political and social-labour paternalistic dimension during the long period of time analysed. Within the paternalistic programmes, active until and including 1970, mining companies had already established faith schools in Aller, but most of the miners’ children received their education in state schools entrenched in severe patterns of obedience and submission. The educational system within Franco’s regime has strived to perpetuate the social roles of girls and boys through single-sex education.

A new insight in stress recovery tecniques and hessian reconstruction methods

Stress recovery techniques have been an active research topic in the last few years since, in 1987, Zienkiewicz and Zhu proposed a procedure called Superconvergent Patch Recovery (SPR). This procedure is a last-squares fit of stresses at super-convergent points over patches of elements and it leads to enhanced stress fields that can be used for evaluating finite element discretization errors. In subsequent years, numerous improved forms of this procedure have been proposed attempting to add equilibrium constraints to improve its performances. Later, another superconvergent technique, called Recovery by Equilibrium in Patches (REP), has been proposed. In this case the idea is to impose equilibrium in a weak form over patches and solve the resultant equations by a last-square scheme. In recent years another procedure, based on minimization of complementary energy, called Recovery by Compatibility in Patches (RCP) has been proposed in. This procedure, in many ways, can be seen as the dual form of REP as it substantially imposes compatibility in a weak form among a set of self-equilibrated stress fields. In this thesis a new insight in RCP is presented and the procedure is improved aiming at obtaining convergent second order derivatives of the stress resultants. In order to achieve this result, two different strategies and their combination have been tested. The first one is to consider larger patches in the spirit of what proposed in [4] and the second one is to perform a second recovery on the recovered stresses. Some numerical tests in plane stress conditions are presented, showing the effectiveness of these procedures. Afterwards, a new recovery technique called Last Square Displacements (LSD) is introduced. This new procedure is based on last square interpolation of nodal displacements resulting from the finite element solution. In fact, it has been observed that the major part of the error affecting stress resultants is introduced when shape functions are derived in order to obtain strains components from displacements. This procedure shows to be ultraconvergent and is extremely cost effective, as it needs in input only nodal displacements directly coming from finite element solution, avoiding any other post-processing in order to obtain stress resultants using the traditional method. Numerical tests in plane stress conditions are than presented showing that the procedure is ultraconvergent and leads to convergent first and second order derivatives of stress resultants. In the end, transverse stress profiles reconstruction using First-order Shear Deformation Theory for laminated plates and three dimensional equilibrium equations is presented. It can be seen that accuracy of this reconstruction depends on accuracy of first and second derivatives of stress resultants, which is not guaranteed by most of available low order plate finite elements. RCP and LSD procedures are than used to compute convergent first and second order derivatives of stress resultants ensuring convergence of reconstructed transverse shear and normal stress profiles respectively. Numerical tests are presented and discussed showing the effectiveness of both procedures.

Un approccio all'integrazione di mesh e nurbs

Viene sviluppata in XCSurf, un pacchetto di XCModel, una struttura dati chiamata B-Rep il cui scopo è quello di poter accogliere sia geometrie mesh che nurbs. La struttura B-Rep è stata progettata nel lavoro di tesi di F.Pelosi a seguito del riscontro di diverse analogie fra la struttura winged-edge (per mesh) e la struttura B-Rep (per nurbs). In questa tesi viene sviluppata ed integrata ulteriormente. Il punto di arrivo è la possibilità di attaccare due modelli qualsiasi (Nurbs + Nurbs, Mesh + Nurbs, Mesh + Mesh), deformando opportunamente le parti da attaccare, ma mantenendo tutte le informazioni in un'unica struttura.

Acinetobacter baumannii isolates from pets and horses in Switzerland: molecular characterization and clinical data

OBJECTIVES: We investigated whether Acinetobacter baumannii isolates of veterinary origin shared common molecular characteristics with those described in humans. METHODS: Nineteen A. baumannii isolates collected in pets and horses were analysed. Clonality was studied using repetitive extragenic palindromic PCR (rep-PCR) and multilocus sequence typing (MLST). PCR and DNA sequencing for various beta-lactamase, aminoglycoside-modifying enzyme, gyrA and parC, ISAba1 and IS1133, adeR and adeS of the AdeABC efflux pump, carO porin and class 1/2/3 integron genes were performed. RESULTS: Two main clones [A (n = 8) and B (n = 9)] were observed by rep-PCR. MLST indicated that clone A contained isolates of sequence type (ST) ST12 (international clone II) and clone B contained isolates of ST15 (international clone I). Two isolates of ST10 and ST20 were also noted. Seventeen isolates were resistant to gentamicin, 12 to ciprofloxacin and 3 to carbapenems. Isolates of ST12 carried bla(OXA-66), bla(ADC-25), bla(TEM-1), aacC2 and IS1133. Strains of ST15 possessed bla(OXA-69), bla(ADC-11), bla(TEM-1) and a class 1 integron carrying aacC1 and aadA1. ISAba1 was found upstream of bla(ADC) (one ST10 and one ST12) and/or bla(OXA-66) (seven ST12). Twelve isolates of different STs contained the substitutions Ser83Leu in GyrA and Ser80Leu or Glu84Lys in ParC. Significant disruptions of CarO porin and overexpressed efflux pumps were not observed. The majority of infections were hospital acquired and in animals with predisposing conditions for infection. CONCLUSIONS: STs and the molecular background of resistance observed in our collection have been frequently described in A. baumannii detected in human patients. Animals should be considered as a potential reservoir of multidrug-resistant A. baumannii.