Optimization of performances of gelatin/LiBF(4)-based polymer electrolytes by plasticizing effects

Gelatin is a cheap and abundant natural product with very good biodegradation properties and can be used to obtain acetic acid or LiClO(4)-based gel polymer electrolytes (GPEs) with high ionic conductivity and good stability. This article presents results of GPEs obtained by the plasticization of gelatin and addition of LiBF(4), where the optimization of the system was achieved by using a factorial design type 22 with two variables: glycerol and LiBF(4). From this analysis it was stated that the effect of glycerol as a plasticizer on the ionic conductivity results is much more important than the effect obtained by varying the lithium salt content or the effect of the interaction of both variables. Also all the samples were characterized by X-ray diffraction measurements, UV-vis-NIR spectroscopy and scanning electron microscopy (SEM) and impedance spectroscopy. The ionic conductivity results of all analyzed samples as a function of temperature obey predominantly an Arrhenius relationship and the samples are stable up to 160 degrees C. Good conductivity results combined with transparency and good adhesion to the electrodes have shown that gelatin-based GPEs are very promising materials to be used as solid electrolytes in electrochromic devices. (C) 2009 Elsevier Ltd. All rights reserved.

Role of headmasters, teachers and supervisors in knowledge transfer about occupational health and safety to pupils in vocational education

Background Young people are at an increased risk for illness in working life. The authorities stipulate certain goals for training in occupational health and safety (OHS) in vocational schools. A previous study concluded that pupils in vocational education had limited knowledge in the prevention of health risks at work. The aim of the current study, therefore, was to study how OHS training is organized in school and in workplace-based learning (WPL).   Method The study design featured a qualitative approach, which included interviews with 12 headmasters, 20 teachers, and 20 supervisors at companies in which the pupils had their WPL. The study was conducted at 10 upper secondary schools, located in Central Sweden, that were graduating pupils in four vocational programs.   Result The interviews with headmasters, teachers, and supervisors indicate a staggered picture of how pupils are prepared for safe work. The headmasters generally give teachers the responsibility for how goals should be reached. Teaching is very much based on risk factors that are present in the workshops and on teachers’ own experiences and knowledge. The teaching during WPL also lacks the systematic training in OHS as well as in the traditional classroom environment.   Conclusion Teachers and supervisors did not plan the training in OHS in accordance with the provisions of systematic work environment management. Instead, the teachers based the training on their own experiences. Most of the supervisors did not get information from the schools as to what should be included when introducing OHS issues in WPL.

Crowding no varejo: diferenças na satisfação e percepção de valor hedônico de consumidores de alta e baixa renda no Brasil

Esta investigação visa o melhor entendimento do fenômeno do crowding em lojas, dentro do contexto do mercado brasileiro, procurando identificar como as respostas dos consumidores variam entre os de renda baixa e renda alta, e buscando fatores que possam melhor explicar essas diferenças. Para atender esses objetivos, adotou-se uma metodologia experimental para testar como o aumento da densidade humana afeta diferentemente as respostas dos consumidores de alta e baixa renda. Como moderadoras da relação entre densidade humana e as respostas de consumidores, utilizaram-se as variáveis renda (alta e baixa) e familiaridade (alta e baixa). Três experimentos de desenhos fatoriais permitiram o teste das hipóteses propostas, por meio de análises multivariadas: ANOVAs, ANCOVAs e regressões lineares. Os estudos demonstraram que renda efetivamente modera as respostas dos consumidores, pois existe substancial diferença entre os consumidores de alta e baixa renda para situações de alta densidade humana em lojas. Foram verificadas as seguintes respostas dos consumidores com menor renda em situações de alta densidade humana: atitude mais positiva e maior nível de satisfação do que os de alta renda; percepção de maior valor hedônico em lojas mais cheias de gente versus os de maior renda. Os resultados contrariam a maioria dos achados de estudos realizados nos Estados Unidos nas últimas décadas. Enquanto a maioria desses estudos indica uma resposta negativa à densidade humana, os resultados desta pesquisa evidenciaram que existem respostas mais positivas para o segmento econômico de consumidores de baixa renda. Constatou-se também o efeito moderador do controle informacional (familiaridade) na relação entre densidade humana e as respostas dos consumidores, e o efeito mediador da percepção de valor hedônico na relação entre densidade e satisfação. Os achados oferecem uma contribuição teórica para enriquecer o entendimento do fenômeno de crowding e ressaltam a importância de se considerar a diversidade do contexto socioeconômico para se garantir o desenvolvimento de generalizações que corretamente reflitam as várias realidades do mercado. Do ponto de vista gerencial, o estudo reforça a necessidade de o varejo desenvolver uma maior distinção em ambientes de loja para melhor satisfazer as diferentes preferências dos diversos segmentos de mercado.

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Efeito da associação do herbicida clomazone a nanoesferas de alginato/quitosana na sorção em solos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho zootécnico de girinos de rã-touro com diferentes níveis de proteína e energia digestíveis

A partir dos valores de digestibilidade de alguns ingredientes foram propostas dietas, com diferentes níveis de proteína e energia digestíveis, em esquema fatorial 3 x 3, destinadas a girinos de rã-touro para avaliar o desempenho zootécnico. O experimento, com duração de 60 dias, foi conduzido com 810 girinos, oriundos da mesma desova, distribuídos em 27 caixas de polipropileno, em uma densidade de 1girino/L. O delineamento experimental foi um esquema fatorial com três níveis de proteína digestível (27; 31 e 35%) e três níveis de energia digestível (2.700; 2.800 e 2.900kcal/kg) com três réplicas. Os parâmetros avaliados aos 60 dias foram ganho de peso, consumo da dieta, consumo em proteína da dieta, conversão alimentar, taxa de eficiência proteica e índice de sobrevivência. Os resultados foram submetidos à análise de variância e ao teste de Duncan (95% de precisão). Os resultados encontrados não apresentaram interação entre proteína e energia digestível para nenhum parâmetro avaliado. em relação à proteína digestível, foram verificadas diferenças nos parâmetros consumo em proteína da dieta e taxa de eficiência proteica (TEP), o que demonstra ineficiência das dietas com altos valores proteicos. Deve-se oferecer aos girinos de rã-touro dietas com 27% de proteína digestível, por apresentarem melhor resultado para taxa de eficiência proteica e para consumo em proteína da dieta.

Comunidade infestante e sua interferência no feijoeiro implantado sob plantio direto, na safra de primavera

O objetivo deste estudo foi determinar os períodos críticos de interferência das plantas daninhas no feijoeiro no sistema de plantio direto, na safra de primavera. A cultura antecessora ao feijoeiro foi a de milheto, que gerou 2 t ha-1 de massa seca. Os tratamentos foram constituídos por períodos crescentes (0, 10, 17, 24, 31, 45 e 66 dias após a emergência) de convivência ou de controle das plantas daninhas. O delineamento experimental adotado foi o de blocos ao acaso, com os tratamentos dispostos no esquema fatorial 2 x 6, com quatro repetições, mais duas testemunhas: uma limpa durante todo o ciclo da cultura e outra suja, ausente de controle. A comunidade infestante foi composta por 16 espécies, sendo dez eudicotiledôneas. A espécie de maior importância foi a losna-branca (Parthenium hysterophorus). O período anterior à interferência (PAI) ocorreu até o estádio fenológico V2, e o período total de prevenção à interferência (PTPI), até o estádio V4; assim, o período crítico de prevenção à interferência (PCPI) ficou entre os estádios V2 e V4 do feijoeiro. A safra de primavera mostrou-se alternativa viável de produção. O acúmulo médio de massa e o número médio de indivíduos das plantas daninhas foram pequenos, ocasionando menor interferência na cultura e, consequentemente, um curto PCPI. Houve redução de 19% na produtividade média do feijoeiro quando a cultura conviveu durante todo o seu ciclo com a comunidade infestante.

Adubação nitrogenada para milho com o uso de plantas de cobertura e modos de aplicação de calcário

O sistema plantio direto (SPD) é uma realidade na região dos Cerrados, mas alguns questionamentos persistem nesse tipo de manejo como o modo de realização da calagem e a dose de nitrogênio (N) a ser adotada em cultura comercial, em relação às culturas precedentes. Desse modo, objetivou-se avaliar modos de aplicar o calcário na implantação do SPD e o efeito de culturas de cobertura precedentes sobre a necessidade de adubação nitrogenada da cultura do milho, durante diferentes anos agrícolas. O delineamento experimental utilizado foi de blocos casualizados, em esquema fatorial 5 x 2 (modos de aplicação do calcário x culturas de cobertura) e posterior divisão em três subparcelas, referentes às doses de N (0, 90 e 180 kg ha-1). Foram avaliados quatro modos de aplicação de calcário: incorporado a 0-0,2 m, em out./2001; dose total em superfície aplicada, em out./2001; aplicação de 1/2 da dose, em out./2001, e 1/2, em ago./2002, na superfície; e aplicação de 1/3 da dose recomendada, em mar./2001, + 1/3, em out./2001, e 1/3, em ago./2002, também em superfície. Além de um tratamento testemunha (sem calcário) e duas culturas de cobertura, crotalária e milheto. Os diferentes modos de calagem não alteraram a produtividade de grãos de milho. O cultivo de milho após crotalária apresentou melhor desempenho e menor demanda de adubação nitrogenada, quando comparado ao cultivado após milheto.

Períodos de interferência das plantas daninhas na cultura de cebola (Allium cepa) transplantada

O trabalho foi realizado com o objetivo de estudar os efeitos de períodos de convivência (0, 14, 28, 42, 56, 70, 84 e 98 dias após o transplantio) de uma comunidade de plantas daninhas sobre a produtividade de quatro cultivares de cebola (Mercedes, Granex 33, Superex e Serrana), em sistema de transplantio de mudas. O experimento foi instalado em Jaboticabal-SP, de abril a outubro de 2000, utilizando delineamento experimental de blocos ao acaso, quatro repetições, em esquema fatorial 4 x 8. As principais populações de plantas daninhas no final dos períodos de convivência foram de Coronopus didymus, Amaranthus hybridus e Cyperus rotundus. Os cultivares Mercedes (2,90 kgm-2) e Granex 33 (2,64 kgm-2) foram os mais produtivos, independentemente da interferência das plantas daninhas. A convivência com as plantas daninhas durante os primeiros 98 dias reduziu a produtividade da cebola em 95% e o peso médio de bulbos em 91%. O período anterior à interferência (PAI) foi de 42 dias, não havendo diferença entre os cultivares de cebola.

Determinação de parâmetros de qualidade para formas farmacêuticas homeopáticas

All medicine, whether allopathic or homeopathic, must go through strict quality control, which must ratify their characteristics throughout the period of validity. During the time of preparation and storage, solutions of the drugs are in permanent contact with packaging materials that can release undesirable substances to the solution. Several factors may influence the release of packing materials, and factorial design (FD) is a useful tool for analyzing the phenomenon. The aim of this study was the determination of quality parameters for Homeopathic solid (globules) and liquid (drops) dosage forms. It was carried out analysis in homeopathic globules for weight variation, mechanical strength, and moisture content uniformity. For liquid preparations, standard solutions were prepared from natural rubber bulbs, which were subjected to exhaustive extraction with two ethanol solutions (30 and 70%) in the ultrasonic bath for 20 minutes at 25°C and 50°C in three successive cycles. Studies of transfer have been made within five days, by spectrophotometric analysis in the UV region at 312 nm with λmáx and 323 nm for samples in 70% ethanol and 30% respectively. PH values were analyzed. We also conducted two FD studies, where the first, the three-level variables were solvent (chloroform, ethanol and nhexane), sample mass (30, 60 and 90mg), particle size (large disk, small disk and powder sample). In the second study, the solvent level variables were different ethanolic degrees (EtOH 30%, 70% and pure). The percentage of lending in the solutions was 5.5%, 12.4%, 24.2% and 41% of the total estimated in the reference solution. The values of rate constants of transfer were determined in the order of 0.0134 days-1 and 0.0232 days-1 in absorbance values, the solutions in ethanol at 30% and 70% respectively. These results suggest that the speed of transfer of materials from rubber is affected both by the nature of the vehicle as by the temperature

Consequências da deriva de clomazone e sulfentrazone em clones de E. grandis x E. urophylla

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Interação entre manejo de plantas daninhas e adubação de cobertura no crescimento inicial de Eucalyptus grandis x E. urophylla

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)