Fruit by fruit identification of mealy peaches. Extraction of storage features.

Mealiness is a negative attribute of sensory texture, characterised by the lack of juiciness decrease in the total amount of of water content of tissues. Peach mealy textures are known as \ and leatheriness. Besides the lack of juiciness and flavour, that characterises mealy fruits, in associated with internal browning near the stone and an incapacity of ripening although there i ripe appearance. It is considered as a physiological disorder that appears in stone fruits probably < unbalanced pectolitic enzyme activity during storage. Since January 1996, a wide EC Project entitled: "Mealiness in fruits. Consumer perception and i detection" is being carried out. Within it, the Physical Properties Laboratory (ETSIA-UPM) working to develop instrumental procedures to detect mealiness in different types of fruits (s contributions by Barreiro to AgEng). The results obtained have shown to correlate well with \ measurements in apples (Barreiro et al), also we have succeeded in identifying individual mealy j the basis of instrumental measurement in peaches. The definition of these texture categories will be used in further studies as a base for new individual classification.

Woolliness assessment in peaches (Cv. Springcrest) by sensory and instrumental means.

Mealiness is a negative attribute of sensory texture, characterised by the lack of juiciness without variation of total water content in the tissues. In peaches, mealiness is also known as "woolliness" and "leatheriness". This internal disorder is characterised by the lack of juiciness and flavour. In peaches, it is associated with interna browning near the stone and the incapacity of ripening although there is externa ripe appearance. Woolliness is associated with inadequate cold storage and is considered as a physiological disorder that appears in stone fruits when an unbalanced pectolitic enzyme activity during storage occurs (Kailasapathy and Melton, 1992). Many attempts have been carried out to identify and measure mealiness and woolliness in fruits. The texture of a food product is composed by a wide spectrum of sensory attributes. Consumer defines the texture integrating simultaneously all the sensory attributes. However, an instrument assesses one or several parameters related to a fraction of the texture spectrum (Kramer, 1973). The complexity of sensory analysis by means of trained panels to assess the quality of some producing processes, supports the attempt to estimate texture characteristics by instrumental means. Some studies have been carried out comparing sensory and instrumental methods to assess mealiness and woolliness. The current study is centered on analysis and evaluation of woolliness in peaches and is part of the European project FAIR CT95 0302 "Mealiness in fruits: consumer perception and means for detection". The main objective of this study was to develop procedures to detect woolly peaches by sensory and by instrumental means, as well as to compare both measuring procedures.

Instrumental quality assessment of fresh peaches: Optical and mechanical parameters.

In developing instrumentation for the measurement of fruit quality, there is the need for fast and non-destructive devices, based on sensors, to be installed on-line. In the case of some fruits, like peaches, post-harvest ripeness, which is closely related to high quality for the consumer, is a priority. During ripening, external appearance (colour) and internal mechanical (firmness) and chemical (sugars and acids) quality are main features that evolve rapidly from and unripe to a ripe (high quality) stage. When considering the evolution of fruit quality in this scheme, external colour and firmness are shown to evolve in a parallel pattern, if monitored from the time of harvest to full consumer ripeness ( Rood, 1957; Crisosto et al, 1995; Kader, 1996). The visible (VIS) reflectance spectrum is a fast and easy reference that can be used to estimate quality of peaches, if we could show it to be reliably correlated with peach ripening rate during postharvest (Genard et al. 1994; Moras, 1995; Delwiche and Baumgartner, 1983; Delwiche et al. 1987; Slaughter, 1995; Lleo et al., 1998). Taste, described as an expert acceptance score, improves with ripeness (firmness and colour evolution), when considering the fruits on the tree, and also post-harvest.

Importance of canopy porosity into vineyard and the relationship with the grape maturity. Digital estimation method

In warm and dry climates, the use of porous systems should be required in order to allow a better leaf distribution inside the plant, causing more space in the clusters area and enhancing determined physiological processes so in the leaf (photosynthesis, v entilation, transpiration) as in berry (growth and maturation). Plant geometry indexes, yield and must composition have been studied in three different systems: sprawl with 12 shoots/m (S1); sprawl system with 18 shoots/m (S2) and vertical positioned syste m or VSP with 12 shoots/m (VSP1). Total leaf area increases as the crop load does, whoever surface area depends on to two factors: crop load and the training system (VSP vs. sprawl), which can provide differences in leaf exposure efficiencies. The main objective of this study was to validate digital photography measurements used to compare porosity differences among treatments and, as they affect plant microclimate and, therefore, yield and berry quality. Also, all previous studied indexes (LAI, SA, SFEr) tended to overestimate the relationship between exposed leaf surface and porosity of each treatment, but the use of digital method proved to be an effective tool in order to assess canopy porosity. Results showed that not positioned and free systems (sprawl) scored between 25- 50% more porosity in the clusters area than the fixed vertical system (VSP), which resulted in a better plant microclimate for test conditions, mainly by improving the exposure of internal clusters and internal canopy ventilation. On the other hand, higher crop load treatment (S2) showed a real increase in yield (16%) without any relevant change into must composition, even improving total anthocyanin content into berry during ripening

Importance of canopy porosity into vineyard and the relationship with the grape maturity. Digital estimation method

In warm and dry climates, the use of porous systems should be required in order to allow a better leaf distribution inside the plant, causing more space in the clusters area and enhancing determined physiological processes so in the leaf (photosynthesis, ventilation, transpiration) as in berry (growth and maturation). Plant geometry indexes, yield and must composition have been studied in three different systems: sprawl with 12 shoots/m (S1); sprawl system with 18 shoots/m (S2) and vertical positioned system or VSP with 12 shoots/m (VSP1). Total leaf area increases as the crop load does, whoever surface area depends on to two factors: crop load and the training system (VSP vs . sprawl), which can provide differences in leaf exposure efficiencies. The main objective of this study was to validate digital photography measurements used to compare porosity differences among treatments and, as they affect plant microclimate and, therefore, yield and berry quality. Also, all previous studied indexes (LAI, SA, SFEr) tended to overestimate the relationship between exposed leaf surface and porosity of each treatment, but the use of digital method proved to be an effective tool in order to assess canopy porosity. Results showed that not positioned and free systems (sprawl) scored between 25 - 50% more porosity in the clusters area than the fixed vertical system (VSP), which resulted in a better plant microclimate for test conditions, mainly by improving the exposure of internal clusters and internal canopy ventilation. On the other hand, higher crop load treatment (S2) showed a real increase in yield (16%) without any relevant change into must composition, even improving total anthocyanin content into berry during ripening

Factors affecting berry composition of Tempranillo grapevines before the arrest of phloem transport.

It is already known that berry ripening is determined by the leaf area/fruit ratio, as well as temperature and leaf physiology. The aim of this work was to assess the influence of these parameters on Tempranillo cultivar throughout stage III of berry development.

Expression of xyloglucan endotransglucosylase/hydrolase (XTH) genes and XET activity in ethylene treated apple and tomato fruits.

Xyloglucan endotransglucosylase/hydrolase (XTHs: EC 2.4.1.207 and/or EC 3.2.1.151), a xyloglucan modifying enzyme, has been proposed to have a role during tomato and apple fruit ripening by loosening the cell wall. Since the ripening of climacteric fruits is controlled by endogenous ethylene biosynthesis, we wanted to study whether XET activity was ethylene-regulated, and if so, which specific genes encoding ripening-regulated XTH genes were indeed ethylene-regulated. XET specific activity in tomato and apple fruits was significantly increased by the ethylene treatment, as compared with the control fruits, suggesting an increase in the XTH gene expression induced by ethylene. The 25 SlXTH protein sequences of tomato and the 11 sequences MdXTH of apple were phylogenetically analyzed and grouped into three major clades. The SlXTHs genes with highest expression during ripening were SlXTH5 and SlXTH8 from Group III-B, and in apple MdXTH2, from Group II, and MdXTH10, and MdXTH11 from Group III-B. Ethylene was involved in the regulation of the expression of different SlXTH and MdXTH genes during ripening. In tomato fruit fifteen different SlXTH genes showed an increase in expression after ethylene treatment, and the SlXTHs that were ripening associated were also ethylene dependent, and belong to Group III-B (SlXTH5 and SlXTH8). In apple fruit, three MdXTH showed an increase in expression after the ethylene treatment and the only MdXTH that was ripening associated and ethylene dependent was MdXTH10 from Group III-B. The results indicate that XTH may play an important role in fruit ripening and a possible relationship between XTHs from Group III-B and fruit ripening, and ethylene regulation is suggested.

Occurrence of moulds associated with ovine raw milk and cheeses of the Spanish region of Castilla La Mancha

The distribution of mould species was examined at several points of the processing chain in a Manchego cheese plant and associated dairy farms. Geotrichum and Fusarium were the most frequent genera isolated in milk samples as well as in 1-month ripened cheeses, evidencing a direct transfer from raw milk. Conversely, the mycobiota of long-ripened cheeses consisted mainly of Penicillium species, which gained entry to the cheese through the air of ripening rooms. This study contributes to the understanding of the dynamics of fungal populations in semihard and hard cheeses, highlighting that airborne transfer from the stables could have a direct impact on their quality.

Estudio de los efectos en el viñedo de la modificación del déficit hídrico continuo en los periodos anterior y posterior al envero (cv. Cabernet Sauvignon; Vitis vinifera L.)

En regiones semiáridas, con veranos cálidos, evapotranspiraciones elevadas, humedades relativas bajas, además de precipitaciones intermitentes y escasas (400 mm al año) que reducen la recarga del perfil en invierno, se puede ver afectada la productividad y sostenibilidad de los viñedos. Por eso en estas zonas puede ser necesario utilizar el riego suplementario para mantener la calidad y aumentar la productividad. En este marco de circunstancias es en el que se desarrolla la mayoría de la viticultura española, y en concreto en la zona centro donde se realizó el estudio. Con este trabajo se pretende estudiar la influencia del agua del riego, con distintas dosis y aplicada en diferentes fases de crecimiento y maduración de la baya, en la producción y calidad de la uva. Se estudió la influencia del déficit moderado continuo aplicado antes y después de envero, en el aprovechamiento de los recursos ambientales y en la respuesta del cv. Cabernet Sauvignon. El ensayo se desarrolló en 2010 y 2011 en la finca “La Alcoholera”, perteneciente a bodegas LICINIA S.L., ubicada en la localidad de Chinchón, Comunidad de Madrid, España. Durante 2010 y 2011 se realizaron estudios en cepas del cv. Cabernet Sauvignon (clon 15), injertadas sobre 41B y plantadas en 2005. Con poda corta en Cordón Royat unilateral de 80 cm de altura, y cuya vegetación alcanzó una altura de 97 cm. Las cepas del ensayo fueron conducidas verticalmente en espaldera (VSP), con 10 yemas por metro lineal. Las plantas dentro de la fila fueron separadas 1 m y la distancia de la calle fue de 3 m. La orientación de las filas norte – sur. Se plantearon cuatro tratamientos experimentales con diferentes dosis y momento de aplicación del riego. - T: Testigo. Déficit ligero, con un aporte continuado de agua desde floración (420 mm). - DMc: Déficit moderado continuo. Manejo del riego convencional, empezando en pre-envero (154 mm) - DM1: Déficit moderado a partir de pre-envero. Aporte de riego continuado desde floración reduciéndose la dosis de riego en pre-envero (312 mm). - DM2: Déficit moderado hasta pre-envero. Se empezó a regar a partir de preenvero (230 mm). Se observó que bajo condiciones de estrés hídrico leve, el crecimiento se reduce disminuyendo la migración de fotoasimilados hacia los órganos vegetativos. Generando menor área foliar en las plantas sometidas a déficit hídrico moderado entre floración y cuajado. Disminuyendo su consumo. En maduración la humedad del suelo dependió principalmente del riego aplicado y del consumo de la planta; dicho consumo dependió a la vez del desarrollo foliar del canopy y de la necesidad hídrica de la vid. El aumento del déficit hídrico disminuyó el contenido de agua en el suelo, lo que provocó diferencias en el estado hídrico y en el intercambio gaseoso de las hojas. En condiciones de déficit moderado, la fotosíntesis se encontró altamente correlacionada con el potencial hídrico foliar medido a mediodía solar. Además en condiciones de déficit moderado continuo la disponibilidad hídrica, la demanda atmosférica y el nivel de hidratación de las hojas, interaccionaron de forma compleja en la regulación estomática de las hojas, condicionando el intercambio gaseoso y la eficiencia en el uso del agua. Al aumentar el volumen de agua aplicado el peso de madera de poda por metro de fila fue superior. Las diferencias encontradas en el rendimiento fueron debidas a las diferencias en el peso de baya. El cual estuvo condicionado por la estrategia de riego, ya que, el déficit hídrico moderado antes de envero fue más crítico para el rendimiento que el déficit impuesto durante la madurez. Por otro lado, la biomasa dependió de la actividad fisiológica de la planta, la cual fue altamente dependiente de la disponibilidad hídrica. Déficit hídrico moderado aplicado de cuajado a envero, generó bayas más pequeñas y aumentó la relación hollejo:pulpa. El déficit moderado aplicado después de envero favoreció la acumulación de IPT y antocianos extraíbles, mejorando la calidad de la uva, pero disminuyó la acidez de la baya. El riego aplicado de envero a vendimia desaceleró la concentración de azúcares en bayas que fueron sometidas a déficit antes de pre-envero. ABSTRACT Mediterranean climate is characterized by hot summers, high evapotranspiration rates, and scarce precipitations (400 mm per year) during grapevine cycle. These extremely dry conditions affect vineyard productivity and sustainability. Supplementary irrigation is needed practice in order to maintain yield and quality. Almost all Spanish grape growing regions are characterized by these conditions, especially in the center region, where this trial was performed. The main objective of this work is to study the influence of water irrigation on yield and quality. For this aim, different levels of irrigation (mm of water applied) were applied during different stages of growth and berry maturity of Caberent Sauvignon grapevines. The work was conducted from 2010 to 2011 and located in Licinia (40º 12´ N, 3º 28´ W), Madrid, Spain. The cultivar utilized was Cabernet Sauvignon, clone 15 grafted onto rootstock 41B, planted in 2005. The vineyard was oriented north-south, with spacing on 3 meters between rows and 1 meter between plants. Vines were spurpruned to 10 buds per meter and trained in unilateral cordon with a height of 80 cm. Shoots were positioned vertically (VSP). Considering the amount of water and the moment of the application, four experimental treatments were applied: - T: Control sample. Slight deficit (420 mm) applied from bloom to maturity. - DMc: Continuous moderate deficit. Traditional irrigation: application of 154 mm of water from pre-veraison to maturity. - DM1: Deficit moderate from pre-veraison. Irrigation of 312 mm of water from bloom to pre-veraison. - DM2: Deficit moderate to pre-veraison. Irrigation of 230 mm of water from preveraison to maturity Under moderated water stress conditions it was seen than leaf growth decreases due to the reduction of migration of photo-assimilates to vegetative organs. Vines with moderate water deficit between flowering and ripening develop less leaf area and decrease its water consumption. During maturation of berries, soil moisture depends on irrigation and plant consumption. This consumption further depends on vegetation development and on the vine needs for water. By increasing water deficit, the water content in the soil decreases. This causes differences in leaf water status and in the gases exchange. Under moderate deficit conditions, photosynthesis was found highly correlated with midday leaf water potential. Further, atmospheric demand and the level of leaves hydration interact in complex ways in the stomatal regulation, which affects leaf gas exchange and the efficiency of water use. The amount of water applied is directly proportional to pruning weight. Changes in berry weight cause differences in yield ratios. The differences in berry weights are conditioned by the irrigation strategy, the moderate water deficit before veraison influences more than the deficit applied from veraison. Biomass generated for the plant depends on its physiological activity, which is highly related to the water availability. Moderate water deficit applied from fruit set to ripening generates smaller berries, increasing the pulp/skin ratio. Moderate deficit applied after veraison promotes the accumulation of extractables anthocyans and TPI. Despite this treatment improves color parameters of the grapes, it decreases its total acidity. Irrigation applied from veraison to harvest slows down sugar accumulation in berries compared to those under deficit before veraison conditions.

Viticultura y Cambio Climático en España: Vulnerabilidad en las distintas regiones y estrategias de adaptación frente al desarrollo de nuevas políticas

El presente trabajo realiza un análisis de la vulnerabilidad de la viticultura en España ante el Cambio Climático que contribuya a la mejora de la capacidad de respuesta del sector vitivinícola a la hora de afrontar los retos de la globalización. Para ello se analiza el impacto que puede tener el Cambio Climático en primer lugar sobre determinados riesgos ocasionados por eventos climáticos adversos relacionados con extremos climáticos y en segundo lugar, sobre los principales índices agro-climáticos definidos en el Sistema de Clasificación Climática Multicriterio Geoviticultura (MCGG), que permiten clasificar las zonas desde un punto de vista de su potencial climático. Para el estudio de las condiciones climáticas se han utilizado los escenarios de Cambio Climático regionalizados del proyecto ESCENA, desarrollados dentro del Plan Nacional de Adaptación al Cambio Climático (PNACC) con el fin de promover iniciativas de anticipación y respuesta al Cambio Climático hasta el año 2050. Como parte clave del estudio de la vulnerabilidad, en segundo lugar se miden las necesidades de adaptación para 56 Denominaciones de Origen Protegidas, definidas por los impactos y de acuerdo con un análisis de sensibilidad desarrollado en este trabajo. De este análisis se desprende que los esfuerzos de adaptación se deberían centrar en el mantenimiento de la calidad sobre todo para mejorar las condiciones en la época de maduración en los viñedos de la mitad norte, mientras que en las zonas de la mitad sur y del arco mediterráneo, además deberían buscar mantener la productividad en la viticultura. Los esfuerzos deberían ser más intensos en esta zona sur y también estarían sujetos a más limitaciones, ya que por ejemplo el riego, que podría llegar a ser casi obligatorio para mantener el cultivo, se enfrentaría a un contexto de mayor competencia y escasez de recursos hídricos. La capacidad de afrontar estas necesidades de adaptación determinará la vulnerabilidad del viñedo en cada zona en el futuro. Esta capacidad está definida por las propias necesidades y una serie de condicionantes sociales y de limitaciones legales, como las impuestas por las propias Denominaciones de Origen, o medioambientales, como la limitación del uso de agua. El desarrollo de estrategias que aseguren una utilización sostenible de los recursos hídricos, así como el apoyo de las Administraciones dentro de la nueva Política Agraria Común (PAC) pueden mejorar esta capacidad de adaptación y con ello disminuir la vulnerabilidad. ABSTRACT This paper analyzes the vulnerability of viticulture in Spain on Climate Change in order to improve the adaptive capacity of the wine sector to meet the diverse challenges of globalization. The risks to quality and quantity are explored by considering bioclimatic indices with specific emphasis on the Protected Designation of Origin areas that produce the premium winegrapes. The Indices selected represents risks caused by adverse climatic events related to climate extremes, and requirements of varieties and vintage quality in the case of those used in the Multicriteria Climatic Classification System. (MCCS). To study the climatic conditions, an ensemble of Regional Climate Models (RCMs) of ESCENA project, developed in the framework of the Spanish Plan for Regional Climate Change Scenarios (PNACC-2012) have been used As a key part of the study of vulnerability risks and opportunities are linked to adaptation needs across the Spanish territory. Adaptation efforts are calculated as proportional to the magnitude of change and according to a sensitivity analysis for 56 protected designations of origin. This analysis shows that adaptation efforts should focus on improving conditions in the ripening period to maintain quality in the vineyards of the northern half of Iberian Peninsula, while in areas of the southern half and in the Mediterranean basin, also should seek to maintain productivity of viticulture. Therefore, efforts should be more intense in the Southern and Eastern part, and may also be subject to other limitations, such as irrigation, which could become almost mandatory to keep growing, would face a context of increased competition and lack of resources water. The ability to meet these needs will determine the vulnerability of the vineyard in each region in the future. This capability is defined also by a number of social factors and legal limitations such as environmental regulations, limited water resources or those imposed by their own Designation of Origin. The development of strategies to ensure sustainable use of water resources and the support schemes in the new Common Agricultural Policy (CAP) can improve the resilience and thus reduce vulnerability.

Optimización de la aplicación de lodos de depuración de aguas residuales al abonado o mejora de suelos

El objetivo de este trabajo de investigación fue evaluar el efecto de la aplicación de lodos residuales procedentes de una planta de tratamiento de aguas residuales acondicionados como biosólido para el abonado de tres cultivos agrícolas. Esto se realizó a través del estudio de las variables de producción (desarrollo vegetal de cada cultivo) y de la comparación de las características de los suelos utilizados antes y después de los ensayos experimentales. A través de la investigación se confirmó la mejora en la calidad del suelo y mejor rendimiento de cultivo debido a los biosólidos procedentes de tratamiento de aguas residuales. Este trabajo de investigación de tipo descriptivo y experimental, utilizó lodos optimizados que fueron aplicados a tres cultivos agrícolas de ciclo corto. Fueron evaluados dos cultivos (sandía y tomate) bajo riego y un cultivo (arroz) en secano. En la primera fase del trabajo se realizó la caracterización de los lodos, para ellos se realizaron pruebas físico químicas y microbiológicas. Fue utilizado el método de determinación de metales por espectrometría de emisión atómica de plasma acoplado inductivamente, (ICP-AES) para conocer las concentraciones de metales. La caracterización microbiológica para coliformes totales y fecales se realizó utilizando la técnica del Número más probable (NMP), y para la identificación de organismos patógenos se utilizó el método microbiológico propuesto por Kornacki & Johnson (2001), que se fundamenta en dos procesos: pruebas presuntivas y prueba confirmativa. Tanto los resultados para la determinación de metales y elementos potencialmente tóxicos; como las pruebas para la determinación de microorganismos potencialmente peligrosos, estuvieron por debajo de los límites considerados peligrosos establecidos por la normativa vigente en Panama (Reglamento Técnico COPANIT 47-2000). Una vez establecido la caracterización de los lodos, se evalúo el potencial de nutrientes (macro y micro) presentes en los biosólidos para su potencial de uso como abono en cultivos agrícolas. El secado de lodos fue realizado a través de una era de secado, donde los lodos fueron deshidratados hasta alcanzar una textura pastosa. “La pasta de lodo” fue transportada al área de los ensayos de campo para continuar el proceso de secado y molida. Tres ensayos experimentales fueron diseñados al azar con cinco tratamientos y cuatro repeticiones para cada uno de los tres cultivos: sandía, tomate, arroz, en parcelas de 10m2 (sandía y tomate) y 20 m2 (arroz) para cada tratamiento. Tres diferentes dosis de biosólidos fueron evaluadas y comparadas con un tratamiento de fertilizante comercial y un tratamiento control. La dosis de fertilizante comercial utilizada en cada cultivo fue la recomendada por el Instituto de Investigación Agropecuaria de Panamá. Los ensayos consideraron la caracterización inicial del suelo, la preparación del suelo, semilla, y arreglo topográfico de los cultivos siguiendo las recomendaciones agronómicas de manejo de cultivo establecida por el Instituto de Investigación Agropecuaria. Para los ensayos de sandía y tomate se instaló el sistema de riego por goteo. Se determinaron los ácidos húmicos presentes en los cultivos, y se estudiaron las variables de desarrollo de cada cultivo (fructificación, cosecha, peso de la cosecha, dimensiones de tamaño y color de las frutas, rendimiento, y la relación costo – rendimiento). También se estudiaron las variaciones de los macro y micro nutrientes y las variaciones de pH, textura de suelo y MO disponible al inicio y al final de cada uno de los ensayos de campo. Todas las variables y covariables fueron analizadas utilizando el programa estadístico INFOSAT (software para análisis estadístico de aplicación general) mediante el análisis de varianza, el método de comparaciones múltiples propuesto por Fisher (LSD Fisher) para comparar las medias de los cultivares y el coeficiente de correlación de Pearson que nos permite analizar si existe una asociación lineal entre dos variables. En la evaluación de los aportes del biosólido a los cultivos se observó que los macronutrientes N y P se encontraban de los límites requeridos en cada uno de los cultivos, pero que los niveles de K estuvieron por debajo de los requerimientos de los cultivos. A nivel de la fertilización tradicional con fertilizante químico se observó que la dosis recomendada para cada uno de los cultivos del estudio estaba sobreestimada en los tres principales macronutrientes: Nitrógeno, Fosforo y Potasio. Contenían concentraciones superiores de N, P y K a las requeridas teóricamente por el cultivo. El nutriente que se aporta en exceso es el Fósforo. Encontramos que para el cultivo de sandía era 18 veces mayor a lo requerido por el cultivo, en tomate fue 12 veces mayor y en el cultivo de arroz, 34 veces mayor. El fertilizante comercial tuvo una influencia en el peso final y rendimiento final en cada uno de los cultivos del estudio. A diferencia, los biosólidos tuvieron una influencia directa en el desarrollo de los cultivos (germinación, coloración, tamaño, longitud, diámetro, floración y resistencia a enfermedades). Para el caso de la sandía la dosis de biosólido más cercana al óptimo para el cultivo es la mayor dosis aplicada en este ensayo (97.2 gramos de biosólido por planta). En el caso de tomate, el fertilizante comercial obtuvo los mejores valores, pero las diferencias son mínimas con relación al tratamiento T1, de menor dosis de biosólido (16.2 gramos de biosólido por planta). Los resultados generales del ensayo de tomate estuvieron por debajo del rendimiento esperado para el cultivo. Los tratamientos de aplicación de biosólidos aportaron al desarrollo del cultivo en las variables tamaño, color y resistencia a las enfermedades dentro del cultivo de tomate. Al igual que el tomate, en el caso del arroz, el tratamiento comercial obtuvo los mejores resultados. Los resultados finales de peso y rendimiento del cultivo indican que el tratamiento (T2), menor dosis de biosólido (32.4 gramos por parcela), no tuvo diferencias significativas con los resultados obtenidos en las parcelas con aplicación de fertilizante comercial (T1). El tratamiento T4 (mayor dosis de biosólido) obtuvo los mejores valores para las variables germinación, ahijamiento y espigamiento del cultivo, pero al momento de la maduración obtuvo los menores resultados. Los biosólidos aportan nutrientes a los cultivos y al final del ensayo se observó que permanecen disponibles en el suelo, aportando a la mejora del suelo final. En los tres ensayos, se pudo comprobar que los aportes de los biosólidos en el desarrollo vegetativo de los cultivos. También se encontró en todos los ensayos que no hubo diferencias significativas (p > 0.05) entre los tratamientos de biosólidos y fertilizante comercial. Para obtener mejores resultados en estos tres ensayos se requeriría que a la composición de biosólidos (utilizada en este ensayo) se le adicione Potasio, Calcio y Magnesio en las cantidades requeridas por cada uno de los cultivos. ABSTRACT The objective of this investigation was to evaluate the effect of residual sewage sludge obtained from the residual water of a treatment plant conditioned as Biosolid used on three reliable agricultural crops. The effect of the added sewage sludge was evaluated through the measurement of production variables such as crop plant development and the comparison of the soil characteristics used before and after the experimental tests. This investigation confirmed that biosolids from wastewater treatment can contribute to the growth of these crops. In this experimental approach, optimized sludge was applied to three short-cycle crops including two low-risk crops (watermelon and tomato) and one high-risk crop (rice) all grown on dry land. In the first phase of work, the characteristics of the sludge were assessed using chemical, physical and microbiological tests. The concentrations of metals were determined by atomic emission spectrometry inductively coupled plasma, (ICP-AES). Microbiological characterization was performed measuring total coliform and fecal count using the most probable number technique (NMP) and microbiological pathogens were identified using Kornacki & Johnson (2001) method based on two processes: presumptive and confirmatory tests. Both the results for the determination of metals and potentially toxic elements, as testing for the determination of potentially dangerous microorganisms were below the limits established by the applicable standard in Panama (Technical Regulate COPANIT 47-2000). After the metal and bacterial characterization of the sludge, the presence of macro or micronutrients in biosolids was measured to evaluate its potential for use as fertilizer in the growth of agricultural crops. The sludge was dehydrated via a drying process into a muddy slurry. The pulp slurry was transported to the field trial area to continue the process of drying and grinding. Three randomized experimental trials were designed to test with five treatment regimens and four replications for each of the crops: watermelon, tomato, rice. The five treatment regimens evaluated were three different doses of bio solid with commercial fertilizer treatment control and no fertilizer treatment control. Treatment areas for the watermelon and tomato were 10m2 plots land and for rice was 20m2. The amount of commercial fertilizer used to treat each crop was based on the amount recommended by Agricultural Research Institute of Panama. The experimental trials considered initial characterization of soil, soil preparation, seed, and crop topographical arrangement following agronomic crop management recommendations. For the tests evaluating the growth of watermelons and tomatoes and drip irrigation system was installed. The amount of humic acids present in the culture were determined and developmental variable of each crop were studied (fruiting crop harvest weight, size dimensions and color of the fruit, performance and cost effectiveness). Changes in macro and micronutrients and changes in pH, soil texture and OM available were measured at the beginning and end of each field trial. All variables and covariates were analyzed using INFOSAT statistical program (software for statistical analysis of general application) by analysis of variance, multiple comparisons method as proposed by Fisher (LSD Fisher) to compare the means of cultivars and the Pearson ratio that allows us to analyze if there is a linear association between two variables. In evaluating the contribution of biosolids to agricultural crops, the study determined that the macronutrients N & P were within the requirements of crops, but K levels were below the requirements of crops. In terms of traditional chemical fertilizer fertilization, we observed that the recommended dose for each study crop was overestimated for the three major nutrients: nitrogen, phosphorus and potassium. Higher concentrations containing N, P and K to the theoretically required by the crop. The recommended dose of commercial fertilizer for crops study contained greater amounts of phosphorus, crops that need. The level of phosphorous was found to be18 times greater than was required for the cultivation of watermelon; 12 times higher than required for tomato, and 34 times higher than required for rice cultivation. Phosphorus inputs of commercial fertilizer were a primary influence on the weight and performance of each crop. Unlike biosolids had a direct influence on crop development (germination, color, size, length, diameter, flowering and disease resistance). In the case of growth of watermelons, the Biosolid dose closest to the optimum for cultivation was applied the highest dose in this assay (97.2 grams of bio solids per plant). In the case of tomatoes, commercial fertilizer had the best values but the differences were minimal when compared to treatment T1, the lower dose of sewage sludge (Biosolid 16.2 grams per plant). The overall results for the tomato crop yield of the trial were lower than expected. Additionally, the application of biosolids treatment contributed to the development of fruit of variable size, color and disease resistance in the tomato crops. Similar to the tomato crop, commercial fertilizer treatment provided the best results for the rice crop. The final results of weight and crop yield for rice indicated that treatment with T2 amount of biosolids (34.2 grams per plot) was not significantly different from the result obtained in the application plot given commercial fertilizer (T1). The T4 (higher dose of bio solid) treatment had the best values for the germination, tillering and bolting variables of the rice crop but for fruit ripening yielded lower results. In all three trials, biosolids demonstrated the ability to contribute in the vegetative growth of crops. It was also found in all test no significant differences (p>0.05) between treatment of bio solid and commercial fertilizer. Biosolids provided nutrients to the crops and even at the end of the trial remained available in the ground soil, contributing to the improvement of the final ground. The best results from these three trials is that the use of bio solids such as those used in this assay would require the addition of potassium, calcium and magnesium in quantities required for each crop.

Yield and sugar accumulating capacities of Airén cultivar. A preliminary study

Airén is the most worldwide spread white grape cultivar, high yielding, well adapted to hot, dry conditions, and not very sensitive to fungal diseases. Its largest growing region is La Mancha, where Airén has been traditionally bush trained, spur pruned and grown with no irrigation. However, grape growing has evolved to meet the need for higher yields and harvest mechanization; and modern cultural practices train grape vines to simple multi-wire trellis systems, cane pruned, and usually irrigated. The aim of the present study was to evaluate the yield and sugar accumulating capacities of Airén cultivar with regard to leaf area, and to assess the influence that different yield components have on yield. In 2014, five commercial irrigated vineyards, located in La Mancha, of different ages, and grafted onto different rootstocks were selected for this study. Canopy surface area (SA) was measured at maturity. Berry weight and sugar concentration were measured during ripening on a weekly basis. Yield and yield components were determined at harvest. Values for shoot density ranged 2.3-5.1 shoots/m2; SA, 0.6-1.1 m2/m2; yield, 20-40 t/ha; fertility, 1.1-1.7 bunches/shoot; bunch weight, 450-650 g; berry weight, 2.5-2.9 g; and sugar concentration, 17-21 ºBrix. The number of bunches per shoot was the yield component that had the greatest influence on yield. The number of berries was the main contributing factor to bunch weight. A lineal relationship between SA/yield and sugar concentration was observed, with values of SA/yield ranging from 0.20 to 0.45 m2/kg. A ratio SA/yield of approximately 0.4 m2/kg was needed to reach a value of 20 ºBrix. Hence it would be necessary a SA of 12000 m2/ha, under the conditions of this study, to achieve a 30 t/ha yield, and a sugar concentration of 20 ºBrix. These results are a step forward in the study of the Airén cultivar, being of help for grape growers in the center area of Spain in order to maximize crop yield and sugar accumulation.

O NEGÓCIO DA COMUNICAÇÃO EM TURISMO Cluster no Núcleo de Turismo da Editora Abril

Esse trabalho examina a relação da Comunicação com o Turismo discutindo a importância dos produtos de comunicação junto ao negócio do turismo no Brasil. Tem como corpus da pesquisa o Núcleo de Turismo da Editora Abril, formado pelas publicações Guia 4 Rodas, revistas Viagem e Turismo e National Geographic Brasil, e o portal de viagens www.viajeaqui.com.br. Investiga o peso e o amadurecimento do setor de turismo na economia brasileira, o crescimento e a consolidação do mercado editorial neste segmento. Discute o papel do Cluster na área de Turismo e seus efeitos no Jornalismo. Por meio da análise de conteúdo avalia os processos de produção das publicações do Núcleo, o caminho das informações compartilhadas pelos profissionais envolvidos e o impacto dessas informações nos públicos-alvos de cada veículo. Faz ainda uma reflexão sobre os limites entre Jornalismo e Publicidade em mídias segmentadas dentro de um Cluster.(AU)

O NEGÓCIO DA COMUNICAÇÃO EM TURISMO Cluster no Núcleo de Turismo da Editora Abril

Esse trabalho examina a relação da Comunicação com o Turismo discutindo a importância dos produtos de comunicação junto ao negócio do turismo no Brasil. Tem como corpus da pesquisa o Núcleo de Turismo da Editora Abril, formado pelas publicações Guia 4 Rodas, revistas Viagem e Turismo e National Geographic Brasil, e o portal de viagens www.viajeaqui.com.br. Investiga o peso e o amadurecimento do setor de turismo na economia brasileira, o crescimento e a consolidação do mercado editorial neste segmento. Discute o papel do Cluster na área de Turismo e seus efeitos no Jornalismo. Por meio da análise de conteúdo avalia os processos de produção das publicações do Núcleo, o caminho das informações compartilhadas pelos profissionais envolvidos e o impacto dessas informações nos públicos-alvos de cada veículo. Faz ainda uma reflexão sobre os limites entre Jornalismo e Publicidade em mídias segmentadas dentro de um Cluster.(AU)

The tomato ethylene receptors NR and LeETR4 are negative regulators of ethylene response and exhibit functional compensation within a multigene family

The plant hormone ethylene is involved in many developmental processes, including fruit ripening, abscission, senescence, and leaf epinasty. Tomato contains a family of ethylene receptors, designated LeETR1, LeETR2, NR, LeETR4, and LeETR5, with homology to the Arabidopsis ETR1 ethylene receptor. Transgenic plants with reduced LeETR4 gene expression display multiple symptoms of extreme ethylene sensitivity, including severe epinasty, enhanced flower senescence, and accelerated fruit ripening. Therefore, LeETR4 is a negative regulator of ethylene responses. Reduced expression of this single gene affects multiple developmental processes in tomato, whereas in Arabidopsis multiple ethylene receptors must be inactivated to increase ethylene response. Transgenic lines with reduced NR mRNA levels exhibit normal ethylene sensitivity but elevated levels of LeETR4 mRNA, indicating a functional compensation of LeETR4 for reduced NR expression. Overexpression of NR in lines with lowered LeETR4 gene expression eliminates the ethylene-sensitive phenotype, indicating that despite marked differences in structure these ethylene receptors are functionally redundant.