Generation of 5 fs, 0.7 mJ pulses at 1 kHz through cascade filamentation

Two-cycle optical pulses with duration of 5 fs and energy of 0.7 mJ have been generated at 1 kHz by compressing the 38 fs laser pulses from a carrier-envelope phase (CEP) controlled Ti:sapphire laser system through a cascade filamentation compression technique. A simple and effective method is developed to suppress multiple filament formation and stabilize a single filament by inserting a soft aperture with an appropriate diameter into the driving laser beam prior to focusing, resulting in an excellent compressed beam quality. The good beam quality and potentially higher peak power make this ultrashort laser pulse source a significant tool for high-field physics applications. (C) 2007 Optical Society of America.

Synthesis and matrix isolated photolysis of 2,3-dimethylbicyclo [2.2.0]hexa-2,5-diene-1,4-dicarboxylic acid anhydride: a potential percursor to 2,3-dimethyl-1,4-dehydrobenzene

The synthesis of the first member of a new class of Dewar benzenes has been achieved. The synthesis of 2,3- dimethylbicyclo[2.2.0]hexa-2,5-diene-1, 4-dicarboxylic acid and its anhydride are described. Dibromomaleic anhydride and dichloroethylene were found to add efficiently in a photochemical [2+2] cycloaddition to produce 1,2-dibromo- 3,4-dichlorocyclobutane-1,2-dicarboxylic acid. Removal of the bromines with tin/copper couple yielded dichloro- cyclobutenes which added to 2-butyne under photochemical conditions to yield 5,6-dichloro-2,3-dimethylbicyclo [2.2.0] hex-2-ene dicarboxylic acids. One of the three possible isomers yielded a stable anhydride which could be dechlorinated using triphenyltin radicals generated by the photolysis of hexaphenylditin.

Photolysis of argon matrix isolated 2,3-dimethylbicyclo [2.2.0]hexa-2, 5-diene-1,4-dicarboxylic acid anhydride produced traces whose strongest bands in the infrared were at 3350 and 600 cm^(-1). This suggested the formation of terminal acetylenes. The spectra of argon matrix isolated E- and Z- 3,4-dimethylhexa-1,5-diyne-3-ene and cis-and trans-octa- 2,6-diyne-4-ene were compared with the spectrum of the photolysis products. Possibly all four diethynylethylenes were present in the anhydride photolysis products. Gas chromatograph-mass spectral analysis of the volatiles from the anhydride photolysis again suggested, but did not confirm, the presence of the diethynylethylenes.

Part I. Energy straggling of ^4He below 2.0 MeV in Al, Ni, Au and Pt. Part II. Studies of the Ti-W metallization system on Si

Part I.

In recent years, backscattering spectrometry has become an important tool for the analysis of thin films. An inherent limitation, though, is the loss of depth resolution due to energy straggling of the beam. To investigate this, energy straggling of ⁴He has been measured in thin films of Ni, Al, Au and Pt. Straggling is roughly proportional to square root of thickness, appears to have a slight energy dependence and generally decreases with decreasing atomic number of the adsorber. The results are compared with predictions of theory and with previous measurements. While Ni measurements are in fair agreement with Bohr's theory, Al measurements are 30% above and Au measurements are 40% below predicted values. The Au and Pt measurements give straggling values which are close to one another.

Part II.

MeV backscattering spectrometry and X-ray diffraction are used to investigate the behavior of sputter-deposited Ti-W mixed films on Si substrates. During vacuum anneals at temperatures near 700°C for several hours, the metallization layer reacts with the substrate. Backscattering analysis shows that the resulting compound layer is uniform in composition and contains Ti, Wand Si. The Ti:W ratio in the compound corresponds to that of the deposited metal film. X-ray analyses with Reed and Guinier cameras reveal the presence of the ternary Ti_xW_(1-x)Si₂ compound. Its composition is unaffected by oxygen contamination during annealing, but the reaction rate is affected. The rate measured on samples with about 15% oxygen contamination after annealing is linear, of the order of 0.5 Å per second at 725°C, and depends on the crystallographic orientation of the substrate and the dc bias during sputter-deposition of the Ti-W film.

Au layers of about 1000 Å thickness were deposited onto unreacted Ti-W films on Si. When annealed at 400°C these samples underwent a color change,and SEM micrographs of the samples showed that an intricate pattern of fissures which were typically 3µm wide had evolved. Analysis by electron microprobe revealed that Au had segregated preferentially into the fissures. This result suggests that Ti-W is not a barrier to Au-Si intermixing at 400°C.

Habitat use by 0+ cyprinid fish in the River Great Ouse, East Anglia

This study was designed to examine the habitat use of several species of 0+ cyprinid in the regulated River Great Ouse and to determine the reasons for specific habitat use. In general, all fish species were found associated with the marginal zone, with little diel variation. Use of shallow habitats in the presence of macrophytes correlated well with the distribution of zooplankton in the river channel, the preferred food source of 0+ cyprinids. During the early to late larval phase, all species fed upon rotifers and diatoms. Cladocera, particularly Alona spp. and Chydorus spp., and early instar larvae of Chironomidae, then became prevalent in the diet along with small numbers of Copepoda. Models were developed to determine habitat availability over a range of discharges, using the physical habitat simulation (PHABSIM) component of the Instream Flow Incremental Methodology (IFIM). The results of this analysis revealed that habitat suitable for 0+ fishes comprised a relatively small percentage of the main channel and generally decreased with discharge.

Quantum interference effects of two coherent population trapping states on the atomic spectral lines of a F-e=0 -> F-g=1 transition

We investigate the fluorescence spectrum in a nearly degenerate atomic system of a F-e = 0 -> F-g = 1 transition by analytically solving Schrodinger equations. An ultranarrow fluorescence spectral line in between the two coherent population trapping windows has been found. Our analytic solutions clearly show the origin of the ultranarrow spectral line. Due to quantum interference effects between two coherent population trapping states, the width and intensity of the central spectral line can be controlled by an external magnetic field. Such an effect may be used to detect a magnetic field.

Measurement of the galactic cosmic ray antiproton flux from 0.25 gev to 3.11 gev with the isotope matter antimatter experiment (imax)

The intensities and relative abundances of galactic cosmic ray protons and antiprotons have been measured with the Isotope Matter Antimatter Experiment (IMAX), a balloon-borne magnet spectrometer. The IMAX payload had a successful flight from Lynn Lake, Manitoba, Canada on July 16, 1992. Particles detected by IMAX were identified by mass and charge via the Cherenkov-Rigidity and TOP-Rigidity techniques, with measured rms mass resolution ≤0.2 amu for Z=1 particles.

Cosmic ray antiprotons are of interest because they can be produced by the interactions of high energy protons and heavier nuclei with the interstellar medium as well as by more exotic sources. Previous cosmic ray antiproton experiments have reported an excess of antiprotons over that expected solely from cosmic ray interactions.

Analysis of the flight data has yielded 124405 protons and 3 antiprotons in the energy range 0.19-0.97 GeV at the instrument, 140617 protons and 8 antiprotons in the energy range 0.97-2.58 GeV, and 22524 protons and 5 antiprotons in the energy range 2.58-3.08 GeV. These measurements are a statistical improvement over previous antiproton measurements, and they demonstrate improved separation of antiprotons from the more abundant fluxes of protons, electrons, and other cosmic ray species.

When these results are corrected for instrumental and atmospheric background and losses, the ratios at the top of the atmosphere are p/p=3.21(+3.49, -1.97)x10^(-5) in the energy range 0.25-1.00 GeV, p/p=5.38(+3.48, -2.45) x10^(-5) in the energy range 1.00-2.61 GeV, and p/p=2.05(+1.79, -1.15) x10^(-4) in the energy range 2.61-3.11 GeV. The corresponding antiproton intensities, also corrected to the top of the atmosphere, are 2.3(+2.5, -1.4) x10^(-2) (m^2 s sr GeV)^(-1), 2.1(+1.4, -1.0) x10^(-2) (m^2 s sr GeV)^(-1), and 4.3(+3.7, -2.4) x10^(-2) (m^2 s sr GeV)^(-1) for the same energy ranges.

The IMAX antiproton fluxes and antiproton/proton ratios are compared with recent Standard Leaky Box Model (SLBM) calculations of the cosmic ray antiproton abundance. According to this model, cosmic ray antiprotons are secondary cosmic rays arising solely from the interaction of high energy cosmic rays with the interstellar medium. The effects of solar modulation of protons and antiprotons are also calculated, showing that the antiproton/proton ratio can vary by as much as an order of magnitude over the solar cycle. When solar modulation is taken into account, the IMAX antiproton measurements are found to be consistent with the most recent calculations of the SLBM. No evidence is found in the IMAX data for excess antiprotons arising from the decay of galactic dark matter, which had been suggested as an interpretation of earlier measurements. Furthermore, the consistency of the current results with the SLBM calculations suggests that the mean antiproton lifetime is at least as large as the cosmic ray storage time in the galaxy (~10^7 yr, based on measurements of cosmic ray ^(10)Be). Recent measurements by two other experiments are consistent with this interpretation of the IMAX antiproton results.

Coherent spectroscopy of the Rb-87 Fg=1 -> F-e=0 closed transition

This paper has observed linewidth narrowing of dark states in rubidium cell by using the Hanle configuration. The reduction of the coherent resonance width under the transition of Rb-87 F-g = 1 -> F-e = 0 is observed and the qualitative explanation about its mechanism is presented. Multiple subnatural width dips are obtained with a linearly polarized laser beam for the transition of Rb-87 F-g = 0, 1, 2. The feature of negative and positive slope, namely dispersionlike feature, is observed in the transmitted light.

Materiais compósitos biocidas baseados em resinas reticuladas contendo nanopartículas de prata

Nesta dissertação, duas resinas reticuladas comerciais (denominadas, AmberliteGT73 e AmberliteIRC748) foram empregadas para suportar partículas de prata. Os grupos tiol da GT73 e ácido iminodiacético da IRC748 presentes nessas resinas foram empregados para a fixação de íons Ag+ a partir de solução aquosa. Posteriormente, os íons Ag+ foram reduzidos pelo emprego de três redutores diferentes em pH alcalino, denominados hidrazina, hidroxilamina e formaldeído (pH  12). A morfologia e a impregnação de prata dos materiais binários assim obtidos foram avaliadas por meio de microscópio eletrônico de varredura equipado com detector de elétrons retro-espalhados (SEM-BSE). O detector de espectrometria de energia dispersiva de raios-X (EDAX) acoplado ao SEM permitiu a observação de partículas de prata. Os espectros de raios-X revelaram a presença do metal nas superfícies interna e externa das microesferas dos compósitos. A quantidade de prata incorporada foi determinada pelo método titulométrico, empregando solução padrão de tiocianato de potássio. As características antibactericidas dos compósitos foram avaliadas em colunas contendo pérolas de resina por onde foram percoladas suspensões da bactéria Escherichia coli auxotrópica AB1157 (tipo selvagem) nas concentrações de 103 a 107 células/mL. A avaliação biocida mostrou que estes materiais foram completamente bactericidas, sendo efetivos na eliminação da bactéria em poucos minutos. Esta ação biocida foi atribuída à combinação da atuação da prata e dos grupos funcionais das resinas

Preparação e avaliação biocida de compósitos à base de resinas reticuladas contendo nanopartículas de prata

Neste trabalho, foram utilizadas três resinas reticuladas comerciais de troca iônica e caráter ácido à base de estireno e divinilbenzeno: AmberliteGT73 da Rohm and Haas Co. com grupo tiol, Lewatit VPOC1800 da Bayer Co. com grupo sulfônico e Amberlyst 15WET da Rohm and Haas Co. também com grupo sulfônico. As citadas resinas comerciais foram escolhidas por apresentarem grande capacidade de troca iônica, estabilidade e grupos funcionais de interesse para a introdução de íons Ag+. As resinas foram tratadas com ácido clorídrico para garantir as formas ácidas de seus grupos funcionais e em seguida a redução dos íons Ag+, provenientes de solução de nitrato de prata, foi realizada in situ pela hidroxilamina em presença de solução protetora de colóide composta por 2-hidróxi-etil-celulose e gelatina 1:1. Alguns parâmetros foram modificados durante a redução dos íons Ag+ a Ag0, como por exemplo, o tempo de adição da solução redutora de hidroxilamina, a solução utilizada para controle do pH, e condições do repouso após o controle do pH. Após a incorporação das nanopartículas de prata, tanto as resinas comerciais quanto o produto final foram caracterizados por titulometria, fluorescência de raios-x, análise termogravimétrica, análise elementar, grau de inchamento, difração de raios-x, microscopias ótica e eletrônica. A avaliação da atividade biocida foi realizada através do método da contagem em placas utilizando-se uma cepa de Escherichia Coli ATCC25922TM em concentrações de 103 a 107 células/mL. Todos os compósitos obtidos mostraram atividade bactericida significante, sendo que foi possível perceber que a ação bactericida dos compósitos está relacionada com a presença de prata na forma metálica e a características como tamanho, formato e dispersão das partículas na matriz polimérica. Para efeito de comparação, foram realizados ensaios bactericidas com os copolímeros de partida e assim foi comprovado que a ação bactericida pôde ser atribuída somente às nanopartículas de prata

PP backward elastic scattering between 0.70 and 2.37 GeV/c

̄pp backward elastic scattering has been measured for the cos θ_cm region between – 1.00 and – 0.88 and for the incident ̄p laboratory momentum region between 0.70 and 2.37 GeV/c. These measurements, done in intervals of approximately 0.1 GeV/c, have been performed at the Alternating Gradient Synchrotron at Brookhaven National Laboratory during the winter of 1968. The measured differential cross sections, binned in cos θ_cm intervals of 0.02, have statistical errors of about 10%. Backward dipping exists below 0.95 GeV/c and backward peaking above 0.95 GeV/c. The 180˚ differential cross section extrapolated from our data shows a sharp dip centered at 0.95 GeV/c and a broad hump centered near 1.4 GeV/c. Our data have been interpreted in terms of resonance effects and in terms of diffraction dominance effects.

Preparação de nanopartículas funcionalizadas do tipo casca-núcleo à base de poliestireno e poli(acrilato de butila) para processamento baroplástico

Copolímeros casca-núcleo de poli(acrilato de butila) (núcleo) e poliestireno (casca) foram sintetizados por meio de polimerização em emulsão, conduzida em duas etapas. A adição de ácido itacônico como monômero funcional na polimerização do núcleo foi realizada para verificar seu efeito sobre suas propriedades mecânicas e de processamento. Os copolímeros foram caracterizados por espalhamento dinâmico de luz (DLS), microscopia eletrônica de transmissão (MET), cromatografia de exclusão por tamanho (SEC), espectrometria na região do infravermelho (FTIR) e calorimetria diferencial por varredura (DSC). A incorporação do monômero funcional foi confirmada por DSC e quantificada por titulação. A proporção de poli(acrilato de butila) e poliestireno influenciou diretamente o processamento e as propriedades mecânicas do polímero. Os copolímeros com teores de poliestireno acima de 50% foram processados por compressão e extrusão a temperatura ambiente, apresentando comportamento baroplástico. A presença do monômero funcional não alterou o processamento do polímero e melhorou significativamente sua resistência à tração, aumentando sua tenacidade

2.0 funtsezko tresna bezala informazioaren kudeaketan

[EU]Ezagutzaren gizartean aurkitzen gara eta informazioak enpresa munduan hartu duen garrantziak garapen berriak ekarri ditu bai ikerketan bai informazio eta komunikazio teknologietan (IKT). Beraz, enpresek informazioa era sistematiko batean kudeatu beharra dute ez badute lehiakortasuna galdu nahi. Egoera honetan, zaintza teknologikoak paper garrantzitsu bat betetzen du informazioa lortzeaz, gordetzeaz eta transmititzeaz arduratzen den sistema baita. Baina sistema honen irispena mugatuta egongo da erabiltzen diren baliabideengatik. Gainera, muga hori garrantzi handiagoa hartzen du ETEtan, Euskal Herriko ekonomia-ehunaren oinarria, non baliabideak minimoak diren eta enpresa handiagoekin lehiatu behar diren. Egoera honi aurre egiteko, 2.0 tresnak aurkezten dira, zaintza teknologikorako baliagarriak diren tresnak, kostu eta denbora minimoak eskatzen dituztenak. Horrela, lan hau Euskal Herriko ETEtan zaintza teknologikoaren egoera aztertzera eta bere beharretara egokitzen diren soluzio teknologikoak planteatzera zuzenduta joango da, 2.0 tresnak oinarri moduan daudela.

Some experiments on solving multistage stochastic mixed 0-1 programs with time stochastic dominance constraints

In this work we extend to the multistage case two recent risk averse measures for two-stage stochastic programs based on first- and second-order stochastic dominance constraints induced by mixed-integer linear recourse. Additionally, we consider Time Stochastic Dominance (TSD) along a given horizon. Given the dimensions of medium-sized problems augmented by the new variables and constraints required by those risk measures, it is unrealistic to solve the problem up to optimality by plain use of MIP solvers in a reasonable computing time, at least. Instead of it, decomposition algorithms of some type should be used. We present an extension of our Branch-and-Fix Coordination algorithm, so named BFC-TSD, where a special treatment is given to cross scenario group constraints that link variables from different scenario groups. A broad computational experience is presented by comparing the risk neutral approach and the tested risk averse strategies. The performance of the new version of the BFC algorithm versus the plain use of a state-of-the-artMIP solver is also reported.

Modelos de negocio innovadores en torno a la Web 2.0

El trabajo estudia la Web 2.0 y la repercusión que tiene a nivel empresarial. Idioma: Español.