RF MIMO Systems for Wide-Area Indoor Human Motion Monitoring

Human motion monitoring is an important function in numerous applications. In this dissertation, two systems for monitoring motions of multiple human targets in wide-area indoor environments are discussed, both of which use radio frequency (RF) signals to detect, localize, and classify different types of human motion. In the first system, a coherent monostatic multiple-input multiple-output (MIMO) array is used, and a joint spatial-temporal adaptive processing method is developed to resolve micro-Doppler signatures at each location in a wide-area for motion mapping. The downranges are obtained by estimating time-delays from the targets, and the crossranges are obtained by coherently filtering array spatial signals. Motion classification is then applied to each target based on micro-Doppler analysis. In the second system, multiple noncoherent multistatic transmitters (Tx's) and receivers (Rx's) are distributed in a wide-area, and motion mapping is achieved by noncoherently combining bistatic range profiles from multiple Tx-Rx pairs. Also, motion classification is applied to each target by noncoherently combining bistatic micro-Doppler signatures from multiple Tx-Rx pairs. For both systems, simulation and real data results are shown to demonstrate the ability of the proposed methods for monitoring patient repositioning activities for pressure ulcer prevention.

Effect of channel aging on the sum rate of uplink massive MIMO systems

This paper investigates the achievable sum-rate of uplink massive multiple-input multiple-output (MIMO) systems considering a practical channel impairment, namely, aged channel state information (CSI). Taking into account both maximum ratio combining (MRC) and zero-forcing (ZF) receivers at the base station, we present tight closed-form lower bounds on the sum-rate for both receivers, which provide efficient means to evaluate the sum-rate of the system. More importantly, we characterize the impact of channel aging on the power scaling law. Specifically, we show that the transmit power of each user can be scaled down by 1/√(M), which indicates that aged CSI does not affect the power scaling law; instead, it causes only a reduction on the sum rate by reducing the effective signal-to-interference-and-noise ratio (SINR).

Massive MIMO with I/Q imbalance: Performance analysis and compensation

In this paper, we consider the uplink of a single-cell massive multiple-input multiple-output (MIMO) system with inphase and quadrature-phase imbalance (IQI). This scenario is of particular importance in massive MIMO systems, where the deployment of lower-cost, lower-quality components is desirable to make massive MIMO a viable technology. Particularly, we investigate the effect of IQI on the performance of massive MIMO employing maximum-ratio combining (MRC) receivers. In order to study how IQI affects channel estimation, we derive a new channel estimator for the IQI-impaired model and show that IQI can substantially downgrade the performance of MRC receivers. Moreover, a low-complexity IQI compensation scheme, suitable for massive MIMO, is proposed which is based on the IQI coefficients' estimation and it is independent of the channel gain. The performance of the proposed compensation scheme is analytically evaluated by deriving a tractable approximation of the ergodic achievable rate and providing the asymptotic power scaling laws assuming transmission over Rayleigh fading channels with log-normal large-scale fading. Finally, we show that massive MIMO effectively suppresses the residual IQI effects, as long as, the compensation scheme is applied.

Circuit-aware design of energy-efficient massive MIMO systems

Densification is a key to greater throughput in cellular networks. The full potential of coordinated multipoint (CoMP) can be realized by massive multiple-input multiple-output (MIMO) systems, where each base station (BS) has very many antennas. However, the improved throughput comes at the price of more infrastructure; hardware cost and circuit power consumption scale linearly/affinely with the number of antennas. In this paper, we show that one can make the circuit power increase with only the square root of the number of antennas by circuit-aware system design. To this end, we derive achievable user rates for a system model with hardware imperfections and show how the level of imperfections can be gradually increased while maintaining high throughput. The connection between this scaling law and the circuit power consumption is established for different circuits at the BS.

Activity-based life cycle costing model for cost estimation and monitoring – Case: manned and autonomous dry bulk carrier

Recent developments in automation, robotics and artificial intelligence have given a push to a wider usage of these technologies in recent years, and nowadays, driverless transport systems are already state-of-the-art on certain legs of transportation. This has given a push for the maritime industry to join the advancement. The case organisation, AAWA initiative, is a joint industry-academia research consortium with the objective of developing readiness for the first commercial autonomous solutions, exploiting state-of-the-art autonomous and remote technology. The initiative develops both autonomous and remote operation technology for navigation, machinery, and all on-board operating systems. The aim of this study is to develop a model with which to estimate and forecast the operational costs, and thus enable comparisons between manned and autonomous cargo vessels. The building process of the model is also described and discussed. Furthermore, the model’s aim is to track and identify the critical success factors of the chosen ship design, and to enable monitoring and tracking of the incurred operational costs as the life cycle of the vessel progresses. The study adopts the constructive research approach, as the aim is to develop a construct to meet the needs of a case organisation. Data has been collected through discussions and meeting with consortium members and researchers, as well as through written and internal communications material. The model itself is built using activity-based life cycle costing, which enables both realistic cost estimation and forecasting, as well as the identification of critical success factors due to the process-orientation adopted from activity-based costing and the statistical nature of Monte Carlo simulation techniques. As the model was able to meet the multiple aims set for it, and the case organisation was satisfied with it, it could be argued that activity-based life cycle costing is the method with which to conduct cost estimation and forecasting in the case of autonomous cargo vessels. The model was able to perform the cost analysis and forecasting, as well as to trace the critical success factors. Later on, it also enabled, albeit hypothetically, monitoring and tracking of the incurred costs. By collecting costs this way, it was argued that the activity-based LCC model is able facilitate learning from and continuous improvement of the autonomous vessel. As with the building process of the model, an individual approach was chosen, while still using the implementation and model building steps presented in existing literature. This was due to two factors: the nature of the model and – perhaps even more importantly – the nature of the case organisation. Furthermore, the loosely organised network structure means that knowing the case organisation and its aims is of great importance when conducting a constructive research.

Automotive Radars:towards smarter vehicles

Radars are expected to become the main sensors in various civilian applications, especially for autonomous driving. Their success is mainly due to the availability of low cost integrated devices, equipped with compact antenna arrays, and computationally efficient signal processing techniques. This thesis focuses on the study and the development of different deterministic and learning based techniques for colocated multiple-input multiple-output (MIMO) radars. In particular, after providing an overview on the architecture of these devices, the problem of detecting and estimating multiple targets in stepped frequency continuous wave (SFCW) MIMO radar systems is investigated and different deterministic techniques solving it are illustrated. Moreover, novel solutions, based on an approximate maximum likelihood approach, are developed. The accuracy achieved by all the considered algorithms is assessed on the basis of the raw data acquired from low power wideband radar devices. The results demonstrate that the developed algorithms achieve reasonable accuracies, but at the price of different computational efforts. Another important technical problem investigated in this thesis concerns the exploitation of machine learning and deep learning techniques in the field of colocated MIMO radars. In this thesis, after providing a comprehensive overview of the machine learning and deep learning techniques currently being considered for use in MIMO radar systems, their performance in two different applications is assessed on the basis of synthetically generated and experimental datasets acquired through a commercial frequency modulated continuous wave (FMCW) MIMO radar. Finally, the application of colocated MIMO radars to autonomous driving in smart agriculture is illustrated.

Gene Expression Noise in Spatial Patterning: hunchback Promoter Structure Affects Noise Amplitude and Distribution in Drosophila Segmentation

Positional information in developing embryos is specified by spatial gradients of transcriptional regulators. One of the classic systems for studying this is the activation of the hunchback (hb) gene in early fruit fly (Drosophila) segmentation by the maternally-derived gradient of the Bicoid (Bcd) protein. Gene regulation is subject to intrinsic noise which can produce variable expression. This variability must be constrained in the highly reproducible and coordinated events of development. We identify means by which noise is controlled during gene expression by characterizing the dependence of hb mRNA and protein output noise on hb promoter structure and transcriptional dynamics. We use a stochastic model of the hb promoter in which the number and strength of Bcd and Hb (self-regulatory) binding sites can be varied. Model parameters are fit to data from WT embryos, the self-regulation mutant hb(14F), and lacZ reporter constructs using different portions of the hb promoter. We have corroborated model noise predictions experimentally. The results indicate that WT (self-regulatory) Hb output noise is predominantly dependent on the transcription and translation dynamics of its own expression, rather than on Bcd fluctuations. The constructs and mutant, which lack self-regulation, indicate that the multiple Bcd binding sites in the hb promoter (and their strengths) also play a role in buffering noise. The model is robust to the variation in Bcd binding site number across a number of fly species. This study identifies particular ways in which promoter structure and regulatory dynamics reduce hb output noise. Insofar as many of these are common features of genes (e. g. multiple regulatory sites, cooperativity, self-feedback), the current results contribute to the general understanding of the reproducibility and determinacy of spatial patterning in early development.

S/MIMO MC-CDMA Heuristic Multiuser Detectors Based on Single-Objective Optimization

This paper analyzes the complexity-performance trade-off of several heuristic near-optimum multiuser detection (MuD) approaches applied to the uplink of synchronous single/multiple-input multiple-output multicarrier code division multiple access (S/MIMO MC-CDMA) systems. Genetic algorithm (GA), short term tabu search (STTS) and reactive tabu search (RTS), simulated annealing (SA), particle swarm optimization (PSO), and 1-opt local search (1-LS) heuristic multiuser detection algorithms (Heur-MuDs) are analyzed in details, using a single-objective antenna-diversity-aided optimization approach. Monte- Carlo simulations show that, after convergence, the performances reached by all near-optimum Heur-MuDs are similar. However, the computational complexities may differ substantially, depending on the system operation conditions. Their complexities are carefully analyzed in order to obtain a general complexity-performance framework comparison and to show that unitary Hamming distance search MuD (uH-ds) approaches (1-LS, SA, RTS and STTS) reach the best convergence rates, and among them, the 1-LS-MuD provides the best trade-off between implementation complexity and bit error rate (BER) performance.

Violation of multiparticle Bell inequalities for low- and high-flux parametric amplification using both vacuum and entangled input states

We show how polarization measurements on the output fields generated by parametric down conversion will reveal a violation of multiparticle Bell inequalities, in the regime of both low- and high-output intensity. In this case, each spatially separated system, upon which a measurement is performed, is comprised of more than one particle. In view of the formal analogy with spin systems, the proposal provides an opportunity to test the predictions of quantum mechanics for spatially separated higher spin states. Here the quantum behavior possible even where measurements are performed on systems of large quantum (particle) number may be demonstrated. Our proposal applies to both vacuum-state signal and idler inputs, and also to the quantum-injected parametric amplifier as studied by De Martini The effect of detector inefficiencies is included, and weaker Bell-Clauser-Horne inequalities are derived to enable realistic tests of local hidden variables with auxiliary assumptions for the multiparticle situation.

Sistema de apoio à geração de ideias em grupo considerando as emoções e os aspectos sociais

As emoções dos indivíduos e o contexto social do grupo onde estes estão inseridos têm influência no seu desempenho no que se refere ao desenvolvimento de várias tarefas, incluindo as que são realizadas via electrónica. O processo de geração de ideias em grupo mediado por computador tem vantagens consideráveis em relação ao processo de geração de ideias em grupo tradicional, nomeadamente no que se refere ao aumento da sinergia entre os elementos do grupo, à existência da memória de grupo e à possibilidade dos elementos estarem dispersos no espaço e no tempo. Com isto em mente, o presente trabalho pretende analisar a importância do estado de espírito do participante e a influência que os vários aspectos sociais têm no participante, para assim ser possível tomar determinadas acções com o objectivo de potenciar o desempenho dos utilizadores ao longo da reunião de geração de ideias. Neste trabalho é analisada a influência que o estado de espírito dos participantes e o contexto social das reuniões podem ter no sucesso de uma reunião de geração de ideias electrónica. Considerando a influência de estes factores, é proposto um modelo que inclui essas variáveis no processo de geração de ideias em grupo mediado por computador. Com isto pretende-se demonstrar que a inclusão do modelo proposto numa ferramenta de apoio à geração de ideias em grupo permite melhorar o desempenho individual e consequentemente o desempenho do grupo, bem como a interacção entre todos os elementos. Assim, este trabalho pretende gerar sugestões com o objectivo de manter os participantes atentos e motivados para as tarefas que têm de realizar, nomeadamente a tarefa de geração de ideias. Com o objectivo de aplicar o modelo proposto é também apresentado neste trabalho uma nova ferramenta de geração de ideias em computador que considera o contexto emocional e social da reunião, o S-IGTAI (Social Idea Generation Tool for Ambient Intelligence). Através das interacções entre os participantes e a ferramenta S-IGTAI, é recolhida informação que será o input do modelo proposto, sendo que o output serão as sugestões enviadas para o facilitador. Estas sugestões têm o propósito que o facilitador realize recomendações aos participantes no sentido de manter os seus estados de espírito num nível positivo e eliminar a influência negativa dos vários aspectos sociais, potenciando dessa forma o desempenho de todos os participantes. Com a finalidade de validar o modelo proposto e a nova ferramenta (S-IGTAI) é apresentado um caso de estudo neste documento que permite realizar a avaliação do trabalho desenvolvido.

On the choice of posittioning and cluster size for fixed relay stations in a LTE network

The long term evolution (LTE) is one of the latest standards in the mobile communications market. To achieve its performance, LTE networks use several techniques, such as multi-carrier technique, multiple-input-multiple-output and cooperative communications. Inside cooperative communications, this paper focuses on the fixed relaying technique, presenting a way for determining the best position to deploy the relay station (RS), from a set of empirical good solutions, and also to quantify the associated performance gain using different cluster size configurations. The best RS position was obtained through realistic simulations, which set it as the middle of the cell's circumference arc. Additionally, it also confirmed that network's performance is improved when the number of RSs is increased. It was possible to conclude that, for each deployed RS, the percentage of area served by an RS increases about 10 %. Furthermore, the mean data rate in the cell has been increased by approximately 60 % through the use of RSs. Finally, a given scenario with a larger number of RSs, can experience the same performance as an equivalent scenario without RSs, but with higher reuse distance. This conduces to a compromise solution between RS installation and cluster size, in order to maximize capacity, as well as performance.

Hybrid systems biology: application to Escherichia coli

Dissertation presented to obtain a Master degree in Biotechnology

A Random Access Protocol incorporating Multi-Packet Reception, Retransmission Diversity and Successive Interference Cancellation

8th International Workshop on Multiple Access Communications (MACOM2015), Helsinki, Finland.

TIGRE - An autonomous ground robot for outdoor exploration

13th International Conference on Autonomous Robot Systems (Robotica), 2013

Desenvolvimento e Controlo de um Veículo Autónomo Aéreo Quadrotor

A crescente necessidade de meios de inspecção e recolha de informação de infraestruturas e do meio ambiente natural, origina o recurso a meios tecnológicos cada vez mais evoluídos. Neste contexto, os robôs móveis autónomos aéreos surgem como uma ferramenta importante. Em particular, os veículos aéreos de asa móvel, pela sua manobrabilidade e controlo podem-se utilizar eficazmente em meios complexos como cenários interiores onde o ambiente é parcialmente controlado. A sua utilização em coordenação com outros veículos robóticos móveis e em particular com a crescente autonomia de decisão, permitem uma eficiência elevada, por exemplo, em tarefas de recolha automática de informação, vigilância, apoio a comunicações, etc. A inexistência de um veículo autónomo de asa móvel no cenário multi-robótico desenvolvido pelo Laboratório de Sistemas Autónomos do Instituto Superior de Engenharia do Porto, aliada às suas aplicações referidas, criou a necessidade do desenvolvimento de um veículo desta gama. Identificou-se, pois, o desenvolvimento de um veículo autónomo aéreo do tipo quadrotor com capacidade de vôo base estabilizado como o problema a resolver. Foi efectuado um levantamento de requisitos do sistema, a caracterização de um veículo autónomo aéreo Vertical Take-off and Landing - VTOL, e efectuado um trabalho de pesquisa a fim de possibilitar o conhecimento das técnicas e tecnologias envolvidas. Tendo em vista o objectivo de controlo e estabilização do veículo, foi efectuada a modelização do sistema que serviu não só para a melhor compreensão da sua dinâmica mas também para o desenvolvimento de um simulador que possibilitou a validação de estratégias de controlo e avaliação de comportamentos do veículo para diferentes cenários. A inexistência de controladores de motores brushless adequada (frequência de controlo), originou o desenvolvimento de um controlador dedicado para motores brushless, motores esses utilizados para a propulsão do veículo. Este controlador permite uma taxa de controlo a uma frequência de 20KHz, possui múltiplas interfaces de comunicação (CAN, RS232, Ethernet, SPI e JTAG), é de reduzido peso e dimensões e modular, visto ter sido implementado em dois módulos, i.e., permite a sua utilização com diferentes interfaces de potência. Projectou-se um veículo autónomo aéreo em termos físicos com a definição da sua arquitectura de hardware e software bem como o sistema de controlo de vôo. O sistema de estabilização de vôo compreende o processamento de informação fornecida por um sistema de navegação inercial, um sonar e o envio de referências de velocidade para cada um dos nós de controlo ligados a um barramento CAN instalado no veículo. A implementação do veículo foi alcançada nas suas vertentes mecânica, de hardware e software. O UAV foi equipado com um sistema computacional dotando-o de capacidades para o desempenho de tarefas previamente analisadas. No presente trabalho, são também tiradas algumas conclusões sobre o desenvolvimento do sistema e sua implementação bem como perspectivada a sua evolução futura no contexto de missões coordenadas de múltiplos veículos robóticos.