Markt- und Trendanalyse Laserstrahlschmelzen 2010

Nicht nur die vielfältigen funktionsbezogenen Anforderungen von Produkten und Bauteilen, sondern vor allem die heutigen Marktbedürfnisse stellen große Herausforderungen für aktuelle Fertigungstechnologien dar. Hierbei bildet die kontinuierlich steigende Variantenvielfalt bei gleichzeitiger Senkung der Stückzahlen je Variante die differenzierten Kundenwünsche ab. Diese Entwicklungen begünstigen die Perspektiven des Laserstrahlschmelzens im Allgemeinen sowie seiner speziellen Anwendungsgebiete Rapid Prototyping, Rapid Tooling und Rapid Manufac-turing. In den Branchen der Medizintechnik und der Gummi- und Kunststoffverarbeitung ist bereits seit einiger Zeit eine dynamische Entwicklung erkennbar. Besonders in der Medizintechnik wird der immer breitere Einsatz des Laserstrahlschmelzens durch die hohe Innovationsfähigkeit des Verfahrens und ein verbesserstes Qualitäts-management vorangetrieben. Aufgrund der zunehmenden Forderungen nach individualisierten und individuellen Produkten werden bereits heute patientenangepasste Implantate mit dem Laserstrahlschmelzverfahren gefertigt. Erwarten die Marktteilnehmer eine weiterhin steigende Nachfrage nach solchen Produkten? Wie muss das Verfah-ren verbessert werden, um seine Prozessstabilität zu erhöhen? Wo liegen die zukünftigen Herausforderungen in der Strahlschmelztechnologie? Um diese und weitere Fragen zu klären hat das Fraunhofer Institut für Produkti-onsanlagen und Konstruktionstechnik (IPK) eine Markt- und Trendanalyse für das Laserstrahlschmelzen durchge-führt.

Economic efficiency analysis of different strategies to control post-weaning multi-systemic wasting syndrome and porcine circovirus type 2 subclinical infection in 3-weekly batch system farms.

The study assessed the economic efficiency of different strategies for the control of post-weaning multi-systemic wasting syndrome (PMWS) and porcine circovirus type 2 subclinical infection (PCV2SI), which have a major economic impact on the pig farming industry worldwide. The control strategies investigated consisted on the combination of up to 5 different control measures. The control measures considered were: (1) PCV2 vaccination of piglets (vac); (2) ensuring age adjusted diet for growers (diets); (3) reduction of stocking density (stock); (4) improvement of biosecurity measures (bios); and (5) total depopulation and repopulation of the farm for the elimination of other major pathogens (DPRP). A model was developed to simulate 5 years production of a pig farm with a 3-weekly batch system and with 100 sows. A PMWS/PCV2SI disease and economic model, based on PMWS severity scores, was linked to the production model in order to assess disease losses. This PMWS severity scores depends on the combination post-weaning mortality, PMWS morbidity in younger pigs and proportion of PCV2 infected pigs observed on farms. The economic analysis investigated eleven different farm scenarios, depending on the number of risk factors present before the intervention. For each strategy, an investment appraisal assessed the extra costs and benefits of reducing a given PMWS severity score to the average score of a slightly affected farm. The net present value obtained for each strategy was then multiplied by the corresponding probability of success to obtain an expected value. A stochastic simulation was performed to account for uncertainty and variability. For moderately affected farms PCV2 vaccination alone was the most cost-efficient strategy, but for highly affected farms it was either PCV2 vaccination alone or in combination with biosecurity measures, with the marginal profitability between 'vac' and 'vac+bios' being small. Other strategies such as 'diets', 'vac+diets' and 'bios+diets' were frequently identified as the second or third best strategy. The mean expected values of the best strategy for a moderately and a highly affected farm were £14,739 and £57,648 after 5 years, respectively. This is the first study to compare economic efficiency of control strategies for PMWS and PCV2SI. The results demonstrate the economic value of PCV2 vaccination, and highlight that on highly affected farms biosecurity measures are required to achieve optimal profitability. The model developed has potential as a farm-level decision support tool for the control of this economically important syndrome.

Measurement of the production cross section of prompt J/ψ mesons in association with a W± boson in pp collisions at √8 = 7 TeV with the ATLAS detector

The process pp ! W±J/ provides a powerful probe of the production mechanism of charmonium in hadronic collisions, and is also sensitive to multiple parton interactions in the colliding protons. Using the 2011 ATLAS dataset of 4.5 fb−1 of p s =7TeV pp collisions at the LHC, the first observation is made of the production of W± +prompt J/ events in hadronic collisions, using W± → μѵμ and Jψ → μ+μ−. A yield of 27.4+7.5−6.5 W± + prompt J/ψ events is observed, with a statistical significance of 5.1ơ. The production rate as a ratio to the inclusive W± boson production rate is measured, and the double parton scattering contribution to the cross section is estimated.

CONMICOM – conflict mitigation in communities: LforS learning and simulation game

Three extended families live around a lake. One family are rice farmers, the second family are vegetable farmers, and the third are a family of livestock herders. All of them depend on the use of lake water for their production, and all of them need large quantities of water. All are dependent on the use of the lake water to secure their livelihood. In the game, the families are represented by their councils of elders. Each of the councils has to find means and ways to increase production in order to keep up with the growth of its family and their demands. This puts more and more pressure on the water resources, increasing the risk of overuse. Conflicts over water are about to emerge between the families. Each council of elders must try to pursue its families interests, while at the same time preventing excessive pressure on the water resources. Once a council of elders is no longer able to meet the needs of its family, it is excluded from the game. Will the parties cooperate or compete? To face the challenge of balancing economic well-being, sustainable resource management, and individual and collective interests, the three parties have a set of options for action at hand. These include power play to safeguard their own interests, communication and cooperation to negotiate with neighbours, and searching for alternatives to reduce pressure on existing water resources. During the game the players can experience how tensions may arise, increase and finally escalate. They realise what impact power play has and how alliances form, and the importance of trust-building measures, consensus and cooperation. From the insights gained, important conflict prevention and mitigation measures are derived in a debriefing session. The game is facilitated by a moderator, and lasts for 3-4 hours. Aim of the game: Each family pursues the objective of serving its own interests and securing its position through appropriate strategies and skilful negotiation, while at the same time optimising use of the water resources in a way that prevents their degradation. The end of the game is open. While the game may end by one or two families dropping out because they can no longer secure their subsistence, it is also possible that the three families succeed in creating a situation that allows them to meet their own needs as well as the requirements for sustainable water use in the long term. Learning objectives The game demonstrates how tension builds up, increases, and finally escalates; it shows how power positions work and alliances are formed; and it enables the players to experience the great significance of mutual agreement and cooperation. During the game and particularly during the debriefing and evaluation session it is important to link experiences made during the game to the players’ real-life experiences, and to discuss these links in the group. The resulting insights will provide a basis for deducing important conflict prevention and transformation measures.

MRD's approach: Ideally suited to support Future Earth research agenda in mountains

Both Future Earth and Mountain Research and Development (MRD) aim to support production and dissemination of knowledge for sustainable development. As shown in Future Earth’s Strategic Research Agenda 2014, the global research community has begun to acknowledge its societal role and the need for a new type of research in which scientists link disciplines and coproduce transformation knowledge with stakeholders. Future Earth has defined three research themes that conceptualize the issues to be dealt with at the same time as the way in which this should be done. In many ways, MRD’s policy has made the journal a forerunner of Future Earth’s stipulated “step-change in research”. Indeed, MRD’s section policies aim to support similar contents and ways of producing these forms of knowledge. MRD publishes “systems knowledge” in its MountainResearch section, “target knowledge” in its MountainAgenda section, and “transformation knowledge” in its MountainDevelopment section. Each of these sections has dedicated review criteria to assess and enhance the quality of the knowledge presented in the papers. In this poster, we provide examples from each of the three sections of what the knowledge types look like, how they are assessed, and how they contribute to the three Future Earth themes.

Impacts of Technology Adoption: Comparing Returns to the Farming Sector in Maine under Alternative Technology Regimes

This thesis tests if certain technology choices are associated with a reduction in the proportion of farming activities in the agro-food system in Maine. Goodman, Sorj, and Wilkinson define appropriationism as the replacement of farming sector activities by industrial inputs. Based on the concept of appropriationism, industrial fanning systems using large amounts of synthetic inputs contribute less to fanning than more agrarian systems, like organic fanning. Thus, returns to the farming sector should be greater for organic compared with conventional potato fanning in Maine since organic farming uses fewer industrial inputs. Goodman et. al. define substitutionism as the displacement of farming sector commodities and activities by industrial processes in the marketing sector. Based on the concept of substitutionism, returns to the farming sector should be greater for Lay's Classic®™ potato chips made from natural potatoes compared with Baked Lay's®™ potato crisps manufactured from processed dehydrated potatoes. Returns to the farming sector are defined as returns to the farmer or farm family from farming activities, returns to farm labor, and returns to farmers and farm labor producing inputs used on the farm. Results show absolute returns to the farming sector are less for organic compared to conventional tablestock potato farms in Maine. However as a proportion of farm revenues, large organic farms that market at least 25% of their produce to retail stores or directly to consumers do as well as conventional farms. When comparing returns as a proportion of consumer expenditures, these organic farms do better than conventional farms. Returns to the farming sector are less for organic because of yield penalties, cost of marketing services, and diseconomies of size for organic tablestock potato farms. Expanding acreage and reintegrating livestock with cropping systems may increase returns to the fanning sector. Organic farming demonstrates difficulties in providing marketing services at the farm level. Providing marketing services limits the ability to expand production to capture economies of size. Maine organic potato farmers emphasize non-monetary values such as supporting sustainable agriculture, self-sufficiency, the intrinsic value of work, and close community and family connections. Returns to the farming sector as a proportion of consumer expenditures are about three times greater for Lay's Classic®™ potato chips than for Baked Lay's®™ potato crisps, since the value that farmers receive for potatoes used to produce dehydrated potato flakes in one pound of crisps is about half of the value that farmers receive for potatoes used to make one pound of chips. However, this assumes farmers assign a cost to producing low-grade potatoes for dehydration proportionate to their value. Premium potatoes are used to produce potato chips. Low-grade potatoes are used to produce the dehydrated potato flakes used to make potato crisps. Returns to the farming sector are slightly greater for potato crisps if no costs are allocated to producing low-grade potatoes for dehydration. A shift in consumer preferences from potato chips to crisps may result in a geographical shift of potato production from Maine to the Pacific Northwest assuming no food-grade dehydration facilities are built in Maine.

Efficient Production of Wins in Major League Baseball

Data Envelopment Analysis (DEA) is applied to Major League Baseball salary and performance data from 1985 to 2006 in order to identify those teams which produced wins most efficiently and the characteristics which lead to efficient production. It is shown that on average both National and American League teams over allocate the most resources to first basemen. Additionally, it is found that National League teams should allocate significantly more resources towards starting pitching while American League teams should allocate significantly more resources toward second base. It is also observed that efficient teams use younger less experienced players and employ rosters with a greater number of previous all star appearances.

Leukemia and occupational exposure to electromagnetic fields: An incident case-control study

The existence of an association between leukemia and electromagnetic fields (EMF) is still controversial. The results of epidemiologic studies of leukemia in occupational groups with exposure to EMF are inconsistent. Weak associations have been seen in a few studies. EMF assessment is lacking in precision. Reported dose-response relationships have been based on qualitative levels of exposure to EMF without regard to duration of employment or EMF intensity on the jobs. Furthermore, potential confounding factors in the associations were not often well controlled. The current study is an analysis of the data collected from an incident case-control study. The primary objective was to test the hypothesis that occupational exposure to EMF is associated with leukemia, including total leukemia (TL), myelogenous leukemia (MYELOG) and acute non-lymphoid leukemia (ANLL). Potential confounding factors: occupational exposure to benzene, age, smoking, alcohol consumption, and previous medical radiation exposures were controlled in multivariate logistic regression models. Dose-response relationships were estimated by cumulative occupational exposure to EMF, taking into account duration of employment and EMF intensity on the jobs. In order to overcome weaknesses of most previous studies, special efforts were made to improve the precision of EMF assessment. Two definitions of EMF were used and result discrepancies using the two definitions were observed. These difference raised a question as to whether the workers at jobs with low EMF exposure should be considered as non-exposed in future studies. In addition, the current study suggested use of lifetime cumulative EMF exposure estimates to determine dose-response relationship. The analyses of the current study suggest an association between ANLL and employment at selected jobs with high EMF exposure. The existence of an association between three types of leukemia and broader categories of occupational EMF exposure, is still undetermined. If an association does exist between occupational EMF exposure and leukemia, the results of the current study suggest that EMF might only be a potential factor in the promotion of leukemia, but not its initiation. ^

A woman's right to know: A policy review of abortion legislation in Texas

Introduction: Despite its legalization, abortion remains a controversial issue, one that has many divided on either side of the political spectrum. While there have been several changes made to abortion policy over the past few decades, one that continues to have many asking questions is the Woman’s Right to Know Act, a piece of state imposed abortion legislation that has implemented strict restrictions and requirements of women seeking abortion, including pre-abortion mandatory counseling and a 24 hour waiting period. This project analyzed four controversial components of the mandatory counseling materials in Texas in an attempt to examine the scientific validity behind this legislation. Methods: In order to understand the scientific validity behind the content of the preabortion mandatory counseling, I conducted a systematic literature review to analyze: the purported link between abortion and breast cancer, the existence of fetal pain, the risk of abortion to future fertility, and the negative psychological effects of abortion. An electronic search in EBSCO and PubMed of review articles published between 1995 and 2010 resulted in fourteen reviews. Results: Results of the systematic review found (1) inconclusive evidence suggesting a link between abortion and breast cancer, (2) that fetal pain likely does not occur until the third trimester of pregnancy, (3) that associations exist between induced abortion and subsequent preterm birth and placenta previa, and (4) that there is mixed evidence relating to the negative psychological effects that exist among women having had an abortion and those who have not had abortion. Conclusion: Based on these conclusions, a recommendation was made to revise the current state mandated counseling materials to reflect more accurate and scientifically-based information about abortion and its potential risks.^

Texas electronics waste management: A policy analysis for the 21st century

Electronic waste is a fairly new and largely unknown phenomenon. Accordingly, governments have only recently acknowledged electronic waste as a threat to the environment and public health. In attempting to mitigate the hazards associated with this rapidly growing toxic waste stream, governments at all levels have started to implement e-waste management programs. The legislation enacted to create these programs is based on extended producer responsibility or EPR policy. ^ EPR shifts the burden of final disposal of e-waste from the consumer or municipal solid waste system to the manufacturer of electronic equipment. Applying an EPR policy is intended to send signals up the production chain to the manufacturer. The desired outcome is to change the methods of production in order to reduce production outputs/inputs with the ultimate goal of changing product design. This thesis performs a policy analysis of the current e-waste policies at the federal and state level of government, focusing specifically on Texas e-waste policies. ^ The Texas e-waste law known, as HB 2714 or the Texas Computer TakeBack Law, requires manufacturers to provide individual consumers with a free and convenient method for returning their used computers to manufacturers. The law is based on individual producer responsibility and shared responsibility among consumer, retailers, recyclers, and the TCEQ. ^ Using a set of evaluation criteria created by the Organization for Economic Co-operation and Development, the Texas e-waste law was examined to determine its effectiveness at reducing the threat of e-waste in Texas. Based on the outcomes of the analysis certain recommendations were made for the legislature to incorporate into HB 2714. ^ The results of the policy analysis show that HB 2714 is a poorly constructed law and does not provide the desired results seen in other states with EPR policies. The TakeBack Law does little to change the collection methods of manufacturers and even less to change their production habits. If the e-waste problem is to be taken seriously, HB 2714 must be amended to reflect the proposed changes in this thesis.^

Tratamiento con ácido sulfúrico de semillas de la acacia blanca (Robinia pseudo acacia L.) cosechadas en Mendoza

The results obtained in germination test with seeds of "black locust" (Robinia Pseudo Acacia L) previously treated with sulphuric acid concentrated (d. 1.84) are given. Those test were made in order to get a good germination considering the water tight seed coat that those seeds have in a great percentage. The seeds were soaked in the solution for some minutes; the 180 and 210 minutes soaking (90 and 86.5 % respectively) gave the highest percentage and the fasted process of germination, which were higher than those obtained as efective by other researches. The test made would constitute another evidence of the effect of the locality of production upon the degree of water tightness of the Black locust seeds. The author suggests that the previous treatments of the seeds, the rusticity and quick growing of this species and the furrow system of irrigation so common in the zone will enable, perhaps with success the stablishment of woods of this valuable forestal species, by direct seeding.

Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

GRC is a cementitious composite material made up of a cement mortar matrix and chopped glass fibers. Due to its outstanding mechanical properties, GRC has been widely used to produce cladding panels and some civil engineering elements. Impact failure of cladding panels made of GRC may occur during production if some tool falls onto the panel, due to stone or other objects impacting at low velocities or caused by debris projected after a blast. Impact failure of a front panel of a building may have not only an important economic value but also human lives may be at risk if broken pieces of the panel fall from the building to the pavement. Therefore, knowing GRC impact strength is necessary to prevent economic costs and putting human lives at risk. One-stage light gas gun is an impact test machine capable of testing different materials subjected to impact loads. An experimental program was carried out, testing GRC samples of five different formulations, commonly used in building industry. Steel spheres were shot at different velocities on square GRC samples. The residual velocity of the projectiles was obtained both using a high speed camera with multiframe exposure and measuring the projectile’s penetration depth in molding clay blocks. Tests were performed on young and artificially aged GRC samples to compare GRC’s behavior when subjected to high strain rates. Numerical simulations using a hydrocode were made to analyze which parameters are most important during an impact event. GRC impact strength was obtained from test results. Also, GRC’s embrittlement, caused by GRC aging, has no influence on GRC impact behavior due to the small size of the projectile. Also, glass fibers used in GRC production only maintain GRC panels’ integrity but have no influence on GRC’s impact strength. Numerical models have reproduced accurately impact tests.

Reduced order adaptive models for systems of PDEs using POD

In this work we propose a method to accelerate time dependent numerical solvers of systems of PDEs that require a high cost in computational time and memory. The method is based on the combined use of such numerical solver with a proper orthogonal decomposition, from which we identify modes, a Galerkin projection (that provides a reduced system of equations) and the integration of the reduced system, studying the evolution of the modal amplitudes. We integrate the reduced model until our a priori error estimator indicates that our approximation in not accurate. At this point we use again our original numerical code in a short time interval to adapt the POD manifold and continue then with the integration of the reduced model. Application will be made to two model problems: the Ginzburg-Landau equation in transient chaos conditions and the two-dimensional pulsating cavity problem, which describes the motion of liquid in a box whose upper wall is moving back and forth in a quasi-periodic fashion. Finally, we will discuss a way of improving the performance of the method using experimental data or information from numerical simulations

Contribution to the quality improvement of the antenna measurement using post-processing techniques = Contribución a la mejora de la calidad de medida de antena usando técnicas de post-procesado

One important task in the design of an antenna is to carry out an analysis to find out the characteristics of the antenna that best fulfills the specifications fixed by the application. After that, a prototype is manufactured and the next stage in design process is to check if the radiation pattern differs from the designed one. Besides the radiation pattern, other radiation parameters like directivity, gain, impedance, beamwidth, efficiency, polarization, etc. must be also evaluated. For this purpose, accurate antenna measurement techniques are needed in order to know exactly the actual electromagnetic behavior of the antenna under test. Due to this fact, most of the measurements are performed in anechoic chambers, which are closed areas, normally shielded, covered by electromagnetic absorbing material, that simulate free space propagation conditions, due to the absorption of the radiation absorbing material. Moreover, these facilities can be employed independently of the weather conditions and allow measurements free from interferences. Despite all the advantages of the anechoic chambers, the results obtained both from far-field measurements and near-field measurements are inevitably affected by errors. Thus, the main objective of this Thesis is to propose algorithms to improve the quality of the results obtained in antenna measurements by using post-processing techniques and without requiring additional measurements. First, a deep revision work of the state of the art has been made in order to give a general vision of the possibilities to characterize or to reduce the effects of errors in antenna measurements. Later, new methods to reduce the unwanted effects of four of the most commons errors in antenna measurements are described and theoretical and numerically validated. The basis of all them is the same, to perform a transformation from the measurement surface to another domain where there is enough information to easily remove the contribution of the errors. The four errors analyzed are noise, reflections, truncation errors and leakage and the tools used to suppress them are mainly source reconstruction techniques, spatial and modal filtering and iterative algorithms to extrapolate functions. Therefore, the main idea of all the methods is to modify the classical near-field-to-far-field transformations by including additional steps with which errors can be greatly suppressed. Moreover, the proposed methods are not computationally complex and, because they are applied in post-processing, additional measurements are not required. The noise is the most widely studied error in this Thesis, proposing a total of three alternatives to filter out an important noise contribution before obtaining the far-field pattern. The first one is based on a modal filtering. The second alternative uses a source reconstruction technique to obtain the extreme near-field where it is possible to apply a spatial filtering. The last one is to back-propagate the measured field to a surface with the same geometry than the measurement surface but closer to the AUT and then to apply also a spatial filtering. All the alternatives are analyzed in the three most common near-field systems, including comprehensive noise statistical analyses in order to deduce the signal-to-noise ratio improvement achieved in each case. The method to suppress reflections in antenna measurements is also based on a source reconstruction technique and the main idea is to reconstruct the field over a surface larger than the antenna aperture in order to be able to identify and later suppress the virtual sources related to the reflective waves. The truncation error presents in the results obtained from planar, cylindrical and partial spherical near-field measurements is the third error analyzed in this Thesis. The method to reduce this error is based on an iterative algorithm to extrapolate the reliable region of the far-field pattern from the knowledge of the field distribution on the AUT plane. The proper termination point of this iterative algorithm as well as other critical aspects of the method are also studied. The last part of this work is dedicated to the detection and suppression of the two most common leakage sources in antenna measurements. A first method tries to estimate the leakage bias constant added by the receiver’s quadrature detector to every near-field data and then suppress its effect on the far-field pattern. The second method can be divided into two parts; the first one to find the position of the faulty component that radiates or receives unwanted radiation, making easier its identification within the measurement environment and its later substitution; and the second part of this method is able to computationally remove the leakage effect without requiring the substitution of the faulty component. Resumen Una tarea importante en el diseño de una antena es llevar a cabo un análisis para averiguar las características de la antena que mejor cumple las especificaciones fijadas por la aplicación. Después de esto, se fabrica un prototipo de la antena y el siguiente paso en el proceso de diseño es comprobar si el patrón de radiación difiere del diseñado. Además del patrón de radiación, otros parámetros de radiación como la directividad, la ganancia, impedancia, ancho de haz, eficiencia, polarización, etc. deben ser también evaluados. Para lograr este propósito, se necesitan técnicas de medida de antenas muy precisas con el fin de saber exactamente el comportamiento electromagnético real de la antena bajo prueba. Debido a esto, la mayoría de las medidas se realizan en cámaras anecoicas, que son áreas cerradas, normalmente revestidas, cubiertas con material absorbente electromagnético. Además, estas instalaciones se pueden emplear independientemente de las condiciones climatológicas y permiten realizar medidas libres de interferencias. A pesar de todas las ventajas de las cámaras anecoicas, los resultados obtenidos tanto en medidas en campo lejano como en medidas en campo próximo están inevitablemente afectados por errores. Así, el principal objetivo de esta Tesis es proponer algoritmos para mejorar la calidad de los resultados obtenidos en medida de antenas mediante el uso de técnicas de post-procesado. Primeramente, se ha realizado un profundo trabajo de revisión del estado del arte con el fin de dar una visión general de las posibilidades para caracterizar o reducir los efectos de errores en medida de antenas. Después, se han descrito y validado tanto teórica como numéricamente nuevos métodos para reducir el efecto indeseado de cuatro de los errores más comunes en medida de antenas. La base de todos ellos es la misma, realizar una transformación de la superficie de medida a otro dominio donde hay suficiente información para eliminar fácilmente la contribución de los errores. Los cuatro errores analizados son ruido, reflexiones, errores de truncamiento y leakage y las herramientas usadas para suprimirlos son principalmente técnicas de reconstrucción de fuentes, filtrado espacial y modal y algoritmos iterativos para extrapolar funciones. Por lo tanto, la principal idea de todos los métodos es modificar las transformaciones clásicas de campo cercano a campo lejano incluyendo pasos adicionales con los que los errores pueden ser enormemente suprimidos. Además, los métodos propuestos no son computacionalmente complejos y dado que se aplican en post-procesado, no se necesitan medidas adicionales. El ruido es el error más ampliamente estudiado en esta Tesis, proponiéndose un total de tres alternativas para filtrar una importante contribución de ruido antes de obtener el patrón de campo lejano. La primera está basada en un filtrado modal. La segunda alternativa usa una técnica de reconstrucción de fuentes para obtener el campo sobre el plano de la antena donde es posible aplicar un filtrado espacial. La última es propagar el campo medido a una superficie con la misma geometría que la superficie de medida pero más próxima a la antena y luego aplicar también un filtrado espacial. Todas las alternativas han sido analizadas en los sistemas de campo próximos más comunes, incluyendo detallados análisis estadísticos del ruido con el fin de deducir la mejora de la relación señal a ruido lograda en cada caso. El método para suprimir reflexiones en medida de antenas está también basado en una técnica de reconstrucción de fuentes y la principal idea es reconstruir el campo sobre una superficie mayor que la apertura de la antena con el fin de ser capaces de identificar y después suprimir fuentes virtuales relacionadas con las ondas reflejadas. El error de truncamiento que aparece en los resultados obtenidos a partir de medidas en un plano, cilindro o en la porción de una esfera es el tercer error analizado en esta Tesis. El método para reducir este error está basado en un algoritmo iterativo para extrapolar la región fiable del patrón de campo lejano a partir de información de la distribución del campo sobre el plano de la antena. Además, se ha estudiado el punto apropiado de terminación de este algoritmo iterativo así como otros aspectos críticos del método. La última parte de este trabajo está dedicado a la detección y supresión de dos de las fuentes de leakage más comunes en medida de antenas. El primer método intenta realizar una estimación de la constante de fuga del leakage añadido por el detector en cuadratura del receptor a todos los datos en campo próximo y después suprimir su efecto en el patrón de campo lejano. El segundo método se puede dividir en dos partes; la primera de ellas para encontrar la posición de elementos defectuosos que radian o reciben radiación indeseada, haciendo más fácil su identificación dentro del entorno de medida y su posterior substitución. La segunda parte del método es capaz de eliminar computacionalmente el efector del leakage sin necesidad de la substitución del elemento defectuoso.

El injerto en pepino corto tipo español (Cucumis sativus L.) recomencaciones para su empleo en la zona central española

El injerto en hortalizas es uno de los temas de más actualidad en el panorama hortícola, no solo español, sino occidental, y recalcamos occidental, pues en muchos países que no corresponden a ese ámbito, sobre todo asiáticos: Japón, Corea, China, Filipinas, etc., esta es una técnica que cuenta con una gran difusión desde hace décadas, siendo, por ejemplo en Japón, la mayoría de sus cultivos de cucurbitáceas y solanáceas realizados con planta injertada. A finales de los noventa quedó claro que el empleo de bromuro de metilo tenía una fecha de caducidad y que las zonas que tenían una fuerte dependencia de este desinfectante de suelo debían de buscar alternativas a un plazo lo más corto posible, con un punto añadido sobre etapas anteriores, debían ser alternativas lo más respetuosas posible con el medio ambiente y que no incrementaran, de forma importante, los costes de producción. En la zona centro y concretamente en los invernaderos de la Comunidad de Madrid y zonas cercanas de Toledo y Guadalajara el pepino era y es el cultivo predominante, los horticultores empleaban el bromuro de metilo de forma sistemática para desinfectar sus suelos y la desaparición de este producto les planteaba una gran incertidumbre, lo que llevó a que desde diferentes instancias se buscaran diferentes alternativas. Tras analizar las posibilidades que se podían implementar y conocido el buen resultado que había dado el injerto en sandía en Almería, se decidió acometer los trabajos que conforman esta Tesis Doctoral, planteando en la zona, diferentes ensayos con la idea de conocer, si el injerto en pepino, con los cultivares empleados habitualmente, podía ser una alternativa real para los horticultores, tanto de Madrid, como los de las zonas cercanas de Toledo y Guadalajara. Se pretendía conocer sobre todo las repercusiones agronómicas y si esta técnica podría emplearse en solitario o era necesario complementarla con otras alternativas: desinfectantes químicos, solarización, biofumigación e incluso desinfección con vapor de agua. Los ensayos fueron realizados de forma secuencial entre el año 1999 y el 2011, comprobándose en primer lugar que el empleo de portainjertos híbridos de calabaza era posible con los cultivares de pepino corto tipo español, mayoritariamente empleados en los últimos años del siglo XX y primeros del XXI, fundamentalmente: Serena. Tras los primeros ensayos, Shintoza parecía el portainjerto híbrido de calabaza (Cucurbita maxima x C. moschata) con mejores perspectivas de empleo, pues presentaba la ventaja adicional de ser bien conocido por los semilleros que producen planta injertada al ser, en esos momentos, el portainjerto más empleado en sandía, lo que garantizaba por su lado, su empleo en pepino, y que los horticultores pudiesen disponer de planta injertada. Más adelante los trabajos se encaminaron hacia la determinación de la densidad y tipo de poda más adecuado para la planta injertada, realizándose múltiples ensayos en esta dirección, que culminaron con la conclusión de que el extravigor que los portainjertos conferían a las plantas permitía conducir estas a dos o más brazos (se suelen emplear dos, por mejor adaptación a los trabajos de manejo de la planta por parte de los agricultores), con lo que se podría disminuir la densidad de planta y por tanto ahorrar en este capítulo, cosa que preocupaba y preocupa a los agricultores. Se llegó a determinar que es posible reducir la densidad de plantación en alrededor de un 25%, estando la densidad de brazos más adecuada entre 3 y 3.5 br•m-2. Tras las primeras decisiones tomadas sobre el portainjerto y la densidad más adecuada, se continuó con el estudio de adaptación de estas propuestas a los nuevos cultivares que las empresas de semillas iban proponiendo y los agricultores adoptando. Estas acciones se complementaron con la introducción de nuevos portainjertos susceptibles de sustituir a Shintoza o rotar con él para cambiar de sistema radicular, lo que es conveniente cuando se emplean, como es el caso, portainjertos que no son resistentes a nematodos, principalmente de la especie Meloidogyne incognita, el mayor problema en la zona, debido al suelo. Cultivares como Trópico, en un primer momento, y Urano y Motril más recientemente, se adaptaron muy bien a esta técnica. Entre los portainjertos que mostraron buena adaptación a la técnica de injerto y suficientemente buena compatibilidad con la mayoría de los cultivares ensayados destacan: RS-841, Strongtosa y Camel. Azman también mostró un comportamiento relevante, pero este portainjerto no podrá ser empleado, al ser recientemente retirado del mercado por la empresa que lo obtuvo y comercializó Aunque no era el objetivo principal de esta Tesis Doctoral, se ha comprobado que puede ser interesante combinar el empleo del injerto con otras técnicas alternativas al bromuro de metilo para superar los problemas debidos a enfermedades del suelo o nematodos, pero debe seguirse trabajando pues este es un tema en continua evolución, tanto si se trata de desinfectantes, a la mayoría de los cuales les está siendo retirado el permiso para su comercialización, como de otros métodos como la biofumigación o el empleo de vapor de agua. Queda muy claro que el injerto puede considerarse entre los métodos respetuosos con el medio ambiente, si no el que más, en lo que alternativas al bromuro de metilo se refiere. También en otro momento, se comprobó que con plantas injertadas es posible reducir el aporte de nutrientes, sobre todo nitrógeno, lo que además de un ahorro supone una mejora más desde el punto de vista medioambiental. En definitiva, queda demostrado que es factible el empleo del injerto en pepino corto tipo español, que las selecciones de los híbridos entre Cucurbita maxima y C. moschata que habitualmente se están empleando en sandía son también de aplicación en estos pepinos y que su empleo puede llevarnos a producciones suficientemente remuneradoras, alargándose en muchos casos el ciclo y no modificando, de forma apreciable, la calidad. Queda también demostrado que aunque los portainjertos no sean resistentes a nematodos, su extravigor les hace desarrollarse, desde el punto de vista productivo, suficientemente, llegando por tanto, a “convivir” con ese problema. Al no ser resistentes los portainjertos, y permanecer e incluso agravarse el problema de nematodos es conveniente poder contar con diferentes portainjertos que nos permitan rotar entre ellos y utilizar diferentes sistemas radiculares que harán menos fácil el parasitismo de los nematodos, como recomiendan los nematólogos que se haga. ABSTRACT Vegetable grafting is one of the most current practices in horticulture, not only in Spain, but also in other Western and Asian countries, such as Japan, South Korea, China, the Philippines, etc. This is a decades-old, widespread technique: In fact, most cucurbit and solanaceous crops in Japan and Korea are grafted. At the end of the 1990s, it was clear that methyl bromide had an expiry date. Consequently, the areas strongly dependant on this soil disinfectant had to look for alternatives as quickly as possible. Besides, these had to be as environmentally friendly as possible and should not increase production costs significantly. The cucumber has been and still is the most important crop in greenhouses of the Comunidad de Madrid and in areas near Toledo and Guadalajara. Cucumber growers used methyl bromide systematically to disinfect the soil. The banning of this chemical product brought about uncertainty, which encouraged the search for different alternatives. After analyzing the different possibilities and taking into account the good results of watermelon grafting in Almería, it was decided to carry out the works that make up this doctoral thesis. Different trials were made in order to know if the cultivars used in cucumber grafting might be a real alternative for farmers, not only in Madrid, but also in the areas near Toledo and Guadalajara. The main aim was to assess the agronomic repercussions and whether that technique could be used alone, or if other complementary alternatives, such as chemical disinfectants, solarisation, biofumigation, or even steam disinfection, were necessary. Trials were carried out sequentially from 1999 to 2011. It was observed that the use of pumpkin hybrid rootstocks could be applied to cultivars of Spanish short cucumbers, mainly grown in the late 20th and early 21st centuries eg Serena. After the early trials, Shintoza (Cucurbita maxima x C. moschata), a pumpkin hybrid rootstock, seemed to be the best option, as it had the additional advantage of being well known by nurseries growing grafting plants. Bearing this in mind, Shintoza was then the hybrid rootstock to be used in cucumbers and consequently growers could have grafted plants at their disposal. Later on, research was focused on density and the most adequate type of pruning, by carrying out several trials. These experiments showed that, the extra vigour the rootstocks gave to the plants, allowed them to have two or three stems, (normally nurserymen use two, as it is easier for them to manage the plants). These findings would lead to the lessening the density of the plant and thus reduce costs, something which worried and still worries farmers. It was stated that it would be possible to reduce the density of the plants by about 25%, the optimum density of the stems ranging from 3 to 3.5 stem-m-2. Once decisions were taken both on the rootstock and the appropriate density, we went on to study how to apply these proposals to the new cultivars which the seed companies were proposing and the farmers were applying. These measures were complemented with the introduction of new rootstocks capable of replacing Shintoza, or rotating with it in order to change the root system. This is particularly necessary when rootstocks, non-resistant to nematodes, mainly of the species Meloidogyne incognita, are used. This is the main problem due to the soil of that area. Cultivars such as Trópico, at first, and Urano and Motril, more recently, adapted quite well to this technique. Among the rootstocks which adapted well to grafting and which were compatible with most tested cultivars, were, in particular, RS-841 Strongtosa and Camel. The behaviour of Azman was worth studying, but this rootstock was removed from the market by the company which had bought and commercialized it. Although not the main purpose of the research, it was observed that combining grafting with other alternatives to methyl bromide in order to overcome problems due to soil diseases or nematodes may be worthwhile. However, further research is needed, as this topic is in constant evolution, not only when we come to disinfectants, most of which are being affected by the removal of the permit for commercialization, but also when we refer to other techniques such as biofumigation or the use of steam. Results also showed that grafted plants may reduce the amount of fertilizers, particularly nitrogen, used: This means both saving money and the protection of the environment. We may conclude by saying that grafting Spanish short cucumbers is feasible, that the selections of the hybrids between Cucurbita maxima and C. moschata, habitually used in watermelon grafting, can also be applied to these cucumbers. It can also be concluded that the use of these grafting techniques may lead to profitable yields, by lengthening the growing cycle in many cases and by maintaining the quality to a large extent. Although these rootstocks are not resistant to nematodes, the results showed that their extra vigour enables them to develop in terms of production, and thus they cope with this problem. Since these rootstocks are not resistant to nematodes and the problem with these nematodes may even worsen, it is recommended that different types of rootstocks should be available to enable both the rotation and the use of different root systems, which will encourage the parasitism of nematodes.