Despacho Económico de um SEE com coordenação Hidrotérmica Departamento de Engenharia Electrotécnica

O Despacho económico de um sistema eléctrico de energia com a coordenação hidrotérmica tem como objectivo alcançar a operação óptima do sistema em um determinado período de tempo, ao menor custo possível, e com alto grau de fiabilidade. O problema é muito complexo, pois depende do grau de dificuldade em se prever os caudais dos afluentes, e da capacidade das albufeiras das centrais hídricas. De um modo geral, a produção térmica é determinada de modo a proporcionar o uso mais racional possível da água, dentro do contexto de incertezas quanto às afluências futuras, de modo a, por um lado manter o sistemas o mais económico possível, e por outro, evitar o desperdício energético implícito em descarregamentos de volumes de água turbináveis. Neste trabalho é proposta uma metodologia baseada em programação linear para a solução da coordenação hidrotérmica de curto prazo, e que permite obter custos-sombra de água em centrais hídricas com armazenamento. Esta metodologia foi posteriormente implementado num programa computacional em Microsoft Excel 2010 para a solução numa primeira fase, da rede de 24 barramentos do IEEE, e numa segunda fase, para a solução da Rede Nacional de Transporte referente ao ano de 2010. Para efeitos de análise e validação de dados, os dados provenientes do programa, são depois comparados aos dados dos relatórios da REN. Por último, os dados provenientes do programa em Excel são colocados e analisados no programa PowerWorld Simulator 8.0.

Models and tools for value systems analysis in collaborative environments

Dissertation to obtain the degree of Doctor in Electrical and Computer Engineering, specialization of Collaborative Networks

Projecto de Estruturas Metálicas e Mistas de acordo com os Eurocódigos

Este trabalho pretende ilustrar o dimensionamento dos vários elementos constituintes de uma estrutura metálica e mista, e das ligações entre os mesmos, de acordo com a legislação europeia, denominados, Eurocódigos (EN1990; EN1991-1-1; EN1991-1-4; EN1992-1-1; EN1993-1-1; EN1993- 1-8; EN1994-1-1). Trata-se de um edifício “open space” de 3 pisos, sendo o primeiro piso uma zona comercial e os dois pisos acima escritórios, situado no Porto, tendo sido efectuada a modelação da sua estrutura através de um programa de cálculo automático (SAP2000).

Projeto de estruturas de um edifício

O trabalho a apresentar tem como objetivo a aplicação dos conceitos adquiridos academicamente ao longo de todo o curso em Engenharia Civil num projeto de estruturas de um edifício. Este estudo surge no decorrer de um estágio curricular desenvolvido na empresa Segropol – Sociedade de Engenharia, Projetos e Obras, Lda. A partir das plantas de arquitetura, o projeto foi desenvolvido essencialmente em 4 etapas: conceção estrutural, pré-dimensionamento, validação das soluções estruturais e elaboração de peças desenhadas e pormenores construtivos. Para a definição e obtenção das soluções estruturais de uma estrutura é essencial realizar um enquadramento de toda a regulamentação aplicável, de modo a que todas as disposições associadas à segurança e estabilidade de um edifício sejam cumpridas. A análise e dimensionamento dos elementos foi efetuada com recurso ao programa de cálculo automático CYPE. Apresentando esta empresa vários serviços na área da fiscalização, é abordado neste documento um levantamento de vistorias de um loteamento, agrupando as diferentes anomalias e irregularidades detetadas.

Viabilidade Técnica e Económica das Diferentes Tecnologias de Microprodução

Sabendo que as energias de origem fóssil não são inesgotáveis e que afetam a qualidade do ambiente, nos últimos anos, o interesse pelas energias renováveis mereceu a atenção de ambientalistas e de governantes. Para diminuir a importação de energia, o próprio governo de Portugal incentivou, através de medidas legislativas diversas, a instalação de sistemas alternativos de produção elétrica. Face à pertinência desta matéria, a dissertação, Viabilidade Técnica e Económica das Diferentes Tecnologias de Microprodução, aborda o aproveitamento de energias renováveis através de tecnologias de Microprodução ligadas à rede elétrica. Nesta dissertação, numa primeira fase, apresentam-se os sistemas de microprodução existentes no mercado, descrevem-se os componentes que os constituem e destacam-se os aspetos legislativos aplicáveis. Numa segunda fase, com o objetivo de suportar a elaboração de uma ferramenta informática para apoio na escolha de equipamentos de microprodução, procede-se à análise financeira de tecnologias de microprodução, indicando os modelos matemáticos necessários. Um dos objetivos da dissertação, consiste na construção de uma ferramenta informática de cálculo e na sua aplicação a dois estudos de caso. Esse programa informático foi elaborado em Excel e é capaz de fornecer uma estimativa da produção de energia anual e da avaliação da viabilidade técnico-económica de cada tecnologia e pretende apoiar a decisão do investidor em tecnologias de microprodução. Tendo sido realizados dois estudos de caso - um edifício habitacional unifamiliar e um edifício Industrial – foi possível verificar o funcionamento da aplicação e a sua utilidade na determinação da solução mais vantajosa na escolha de uma tecnologia de microprodução, uma vez que, introduzidos os dados adequados, são gerados os cálculos que permitem fornecer uma visão de conjunto, possibilitando a comparação das diferentes propostas.

Verification of analog circuits in power-down mode

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e Computadores

Recycled steel fibre reinforced concrete failing in bending and in shear

Recent research is showing that the addition of Recycled Steel Fibres (RSF) from wasted tyres can decrease significantly the brittle behaviour of cement based materials, by improving its toughness and post-cracking resistance. In this sense, Recycled Steel Fibre Reinforced Concrete (RSFRC) seems to have the potential to constitute a sustainable material for structural and non-structural applications. To assess this potential, experimental and numerical research was performed on the use of RSFRC in elements failing in bending and in beams failing in shear. The values of the fracture mode I parameters of the developed RSFRC were determined by performing inverse analysis with test results obtained in three point notched beam bending tests. To assess the possibility of using RSF as shear reinforcement in Reinforced Concrete (RC) beams, three point bending tests were executed with three series of RSFRC beams flexurally reinforced with a relatively high reinforcement ratio of longitudinal steel bars in order to assure shear failure for all the tested beams. By performing material nonlinear simulations with a computer program based on the finite element method (FEM), the applicability of the fracture mode I crack constitutive law derived from the inverse analysis is assessed for the prediction of the behaviour of these beams. The performance of the formulation proposed by RILEM TC 162 TDF and CEB-FIP 2010 for the prediction of the shear resistance of fibre reinforced concrete elements was also evaluated.

COMUNICAEMAT: comunicant objectius matemàtics unint nombres, càlcul, algebra, espai, mesura anglès i tecnologia

S' ha realitzat una anàlisi de processos comunicatius i didàctics en un treball de matemàtiques a Primària en llengua anglesa, emmarcat dins un projecte escolar plurilingüe. El treball s' organitza en forma de recerca-acció que analitza dos objectius principals: (a) elaboració de propostes d' activitat matemàtica i de formació de professorat, i (b) anàlisi del treball realitzat en una experiència escolar. Els resultats mostren que: (1) Les dificultats generals observades, es centren més sobre el contingut de la llengua matemàtica (anomenat L4), pel damunt de les pròpies de l’ús de la llengua anglesa L3. (2) Les decisions del professorat privilegiant l’ús de L1 i L2 (català i castellà) per a treballar L4 s’han mostrat positives i adients. La proposta elaborada, que segueix el model CLIL (Content Language Integrated Learning) ha estat positiva i reproduïble (3) Ha estat possible constatar un bon treball amb els estudiants de formació inicial de mestres de llengua estrangera futurs docents dins l'assignatura de Matemàtiques i la seva Didàctica.a la Formació de professorat. Tanmateix es reconeixen dificultats degudes al poc coneixement previ dels estudiants en L3 i L4 i el fet de ser la primera experiència d’aquest tipus que realitzen. (4) L’alumnat de l’escola és capaç de tenir una bona conversa oral en anglès al final de Primària, que creix en qualitat fins dominar estructures causals pròpies del raonament deductiu. (5) L’alumnat guanya en confiança en l’ús de les quatre llengües ,(6) el professorat incorpora relativament elements didàctics nous en la seva acció pedagògica.

Markets and linguistic diversity

The choice of language is a crucial decision for firms competing in cultural goods and media markets with a bilingual or multilingual consumer base. To the extent that multilingual consumers have preferences over the intrinsic characteristics (content) as well as over the language of the product, we can examine the efficiency of market outcomes regarding linguistic diversity. In this paper, I extend the spokes model and introduce language as an additional dimension of product differentiation. I show that: (i) if firms supply their product in a single language (the adoption model) then the degree of linguistic diversity is inefficiently low, and (ii) if some firms supply more than one linguistic version (the translation model) then in principle the market outcome may exhibit insufficient or excessive linguistic diversity. However, excessive diversity is associated to markets where the fraction of products in the minority language is disproportionately high with respect to the relative size of the linguistic minority.

Psychometric properties of the French version of the Zuckerman-Kuhlman Personality Questionnaire

This instrumental study was designed to investigate the psychometric properties of the French version and the cross-language replicability of the Zuckerman-Kuhlman Personality Questionnaire (ZKPQ) at the factor- and at the facet-level. The ZKPQ is an instrument aimed at assessing the five basic factors of Zuckerman's Alternative Five-Factor Model (AFFM). Subjects were 843 French-speaking Swiss, mainly students. At the factor-level, the reliability ranged from .73 to .87 and at the facet level, the reliability ranged from .57 to .77. Differences between genders are congruent with those found in the American sample. Women scored higher on N-Anx, and lower on ImpSS, and Act. A series of exploratory factor analyses supported the overall five-factor structure and the structure at the facet-level. The correlations among the scales support that the five basic factors of the AFFM are orthogonal. Targeted factor analyses and congruence coefficients show high cross-language replicability at the factor- and at the facet-level. The adequacy of the model at the factor- and facet-level was tested using confirmatory factor analyses. The results show that the French version of the ZKPQ is a reliable and valid instrument and has a high cross-language replicability.

Generación automática de código con WebRatio

L'aportació d'aquest PFC consistirà en el desenvolupament d'un programa informàtic que verifiqui els fonaments teòrics i els algorismes proposats pels seus autors i proporcionar una eina per a l'experimentació.

The Early Toarcian anoxia, a synchronous event in the Western Tethys? An approach by quantitative biochronology (Unitary Associations), applied on calcareous nannofossils

During the Early Toarcian, major paleoenvironnemental and paleoceanographical changes occurred, leading to an oceanic anoxic event (OAE) and to a perturbation of the carbon isotope cycle. Although the standard biochronology of the Lower Jurassic is essentially based upon ammonites, in recent years biostratigraphy based on calcareous nannofossils and dinoflagellate cysts is increasingly used to date Jurassic rocks. However, the precise dating and correlation of the Early Toarcian OAE, and of the associated delta C-13 anomaly in different settings of the western Tethys, are still partly problematic, and it is still unclear whether these events are synchronous or not. In order to allow more accurate correlations of the organic rich levels recorded in the Lower Toarcian OAE, this account proposes a new biozonation based on a quantitative biochronology approach, the Unitary Associations (UA), applied to calcareous nannofossils. This study represents the first attempt to apply the UA method to Jurassic nannofossils. The study incorporates eighteen sections distributed across western Tethys and ranging from the Pliensbachian to Aalenian, comprising 1220 samples and 72 calcareous nannofossil taxa. The BioGraph [Savary, J., Guex, J., 1999. Discrete biochronological scales and unitary associations: description of the Biograph Computer program. Memoires de Geologie de Lausanne 34, 282 pp] and UA-Graph (Copyright Hammer O., Guex and Savary, 2002) softwares provide a discrete biochronological framework based upon multi-taxa concurrent range zones in the different sections. The optimized dataset generates nine UAs using the co-occurrences of 56 taxa. These UAs are grouped into six Unitary Association Zones (UA-Z), which constitute a robust biostratigraphic synthesis of all the observed or deduced biostratigraphic relationships between the analysed taxa. The UA zonation proposed here is compared to ``classic'' calcareous nannofossil biozonations, which are commonly used for the southern and the northern sides of Tethys. The biostratigraphic resolution of the UA-Zones varies from one nannofossil subzone or part of it to several subzones, and can be related to the pattern of calcareous nannoplankton originations and extinctions during the studied time interval. The Late Pliensbachian - Early Toarcian interval (corresponding to the UA-Z II) represents a major step in the Jurassic nannoplankton radiation. The recognized UA-Zones are also compared to the carbon isotopic negative excursion and TOC maximum in five sections of central Italy, Germany and England, with the aim of providing a more reliable correlation tool for the Early Toarcian OAE, and of the associated isotopic anomaly, between the southern and northern part of western Tethys. The results of this work show that the TOC maximum and delta C-13 negative excursion correspond to the upper part of the UA-Z II (i.e., UA 3) in the sections analysed. This suggests that the Early Toarcian OAE was a synchronous event within the western Tethys. (c) 2006 Elsevier B.V. All rights reserved.

Detection of possible variant forms of hemoglobin in HbA1c measurements by chromatography liquid ion exchange high resolution (HPLC)

Background: The glycosylated hemoglobin (HbA1c) is used to help monitor the degree of a diabetic’s hyperglycemia. Security and accuracy of the methods used in its detection are affected by variants forms of Hb or elevations in levels of Fetal Hb (HbF). These interference are the result of a change in the haemoglobin total net charge of the variant due of a substitution of one amino acid in the remaining amino terminal of the beta chain. International Standardization for HbA1c values (NGSP) not include interference assessment as part of the certification program. Therefore, the effect of each variant or the lifting of the HbF on HbA1c result should be examined in each sample depending on the detected variant and the method used for the detection of the same. The objectives were: to describe the possible variants of Hb and their interference in HbA1c measurement by our method, after the implementation of a computer program for their detection. To identify some variants detected by chromatography liquid ion exchange high resolution (HPLC) with DNA molecular sequencing.

An Analysis of black-box optimization problems in reinsurance: evolutionary-based approaches

Black-box optimization problems (BBOP) are de ned as those optimization problems in which the objective function does not have an algebraic expression, but it is the output of a system (usually a computer program). This paper is focussed on BBOPs that arise in the eld of insurance, and more speci cally in reinsurance problems. In this area, the complexity of the models and assumptions considered to de ne the reinsurance rules and conditions produces hard black-box optimization problems, that must be solved in order to obtain the optimal output of the reinsurance. The application of traditional optimization approaches is not possible in BBOP, so new computational paradigms must be applied to solve these problems. In this paper we show the performance of two evolutionary-based techniques (Evolutionary Programming and Particle Swarm Optimization). We provide an analysis in three BBOP in reinsurance, where the evolutionary-based approaches exhibit an excellent behaviour, nding the optimal solution within a fraction of the computational cost used by inspection or enumeration methods.

Stringless Portland Cement Concrete Paving, February 2004

This report describes results from a study evaluating the use of stringless paving using a combination of global positioning and laser technologies. CMI and Geologic Computer Systems developed this technology and successfully implemented it on construction earthmoving and grading projects. Concrete paving is a new area for considering this technology. Fred Carlson Co. agreed to test the stringless paving technology on two challenging concrete paving projects located in Washington County, Iowa. The evaluation was conducted on two paving projects in Washington County, Iowa, during the summer of 2003. The research team from Iowa State University monitored the guidance and elevation conformance to the original design. They employed a combination of physical depth checks, surface location and elevation surveys, concrete yield checks, and physical survey of the control stakes and string line elevations. A final check on profile of the pavement surface was accomplished by the use of the Iowa Department of Transportation Light Weight Surface Analyzer (LISA). Due to the speed of paving and the rapid changes in terrain, the laser technology was abandoned for this project. Total control of the guidance and elevation controls on the slip-form paver were moved from string line to global positioning systems (GPS). The evaluation was a success, and the results indicate that GPS control is feasible and approaching the desired goals of guidance and profile control with the use of three dimensional design models. Further enhancements are needed in the physical features of the slipform paver oil system controls and in the computer program for controlling elevation.