BAMS: A Tool for Supervised Burned Area Mapping Using Landsat Data

A new supervised burned area mapping software named BAMS (Burned Area Mapping Software) is presented in this paper. The tool was built from standard ArcGIS (TM) libraries. It computes several of the spectral indexes most commonly used in burned area detection and implements a two-phase supervised strategy to map areas burned between two Landsat multitemporal images. The only input required from the user is the visual delimitation of a few burned areas, from which burned perimeters are extracted. After the discrimination of burned patches, the user can visually assess the results, and iteratively select additional sampling burned areas to improve the extent of the burned patches. The final result of the BAMS program is a polygon vector layer containing three categories: (a) burned perimeters, (b) unburned areas, and (c) non-observed areas. The latter refer to clouds or sensor observation errors. Outputs of the BAMS code meet the requirements of file formats and structure of standard validation protocols. This paper presents the tool's structure and technical basis. The program has been tested in six areas located in the United States, for various ecosystems and land covers, and then compared against the National Monitoring Trends in Burn Severity (MTBS) Burned Area Boundaries Dataset.

A large-area photolithography technique based on surface plasmons leakage modes

An atomic force microscope (AFM) assisted surface plasmons leakage radiation photolithography technique has been numerically demonstrated by using two-dimensional finite-difference time-domain (2D-FDTD) method. With the aid of a metallic AFM tip, particular characteristic of the Kretstchmann configuration to excite surface plasmons (SPs) is utilized to achieve large-area patterns with high spatial resolution and contrast, the photoresist could be exposed with low power laser due to the remarkable local field enhancement at the metal/dielectric interface and the resonant localized SPs modes near the tip. Good tolerance on the film thickness and incident angle has been obtained, which provides a good practicability for experiments. This photolithography technique proposed here can realize large-area, high-resolution, high-contrast, nondestructive, arbitrary-structure fabrication of nanoscale devices. (c) 2007 Elsevier B.V. All rights reserved.

Implementation of the nursing process in a health area: models and assessment structures used

Objective: to analyze what nursing models and nursing assessment structures have been used in the implementation of the nursing process at the public and private centers in the health area Gipuzkoa (Basque Country). Method: a retrospective study was undertaken, based on the analysis of the nursing records used at the 158 centers studied. Results: the Henderson model, Carpenito's bifocal structure, Gordon's assessment structure and the Resident Assessment Instrument Nursing Home 2.0 have been used as nursing models and assessment structures to implement the nursing process. At some centers, the selected model or assessment structure has varied over time. Conclusion: Henderson's model has been the most used to implement the nursing process. Furthermore, the trend is observed to complement or replace Henderson's model by nursing assessment structures.

133-W pulsed fiber amplifier with large-mode-area fiber

A master-oscillator fiber power amplifier (MOPA) system with a 4-m-long Yb3+-doped homemade large mode area (LMA) double-clad fiber is reported. The system emits up to 133.8 W of amplified radiation at a wavelength of 1064 nm and a repetition rate of 100 kHz, limited only by the available pump power. Peak power of 300 kW at 20 kHz with a pulse duration of 15 ns is obtained. (c) 2006 Society of Photo-Optical Instrumentation Engineers.

133-W pulsed fiber amplifier with large-mode-area fiber

A master-oscillator fiber power amplifier (MOPA) system with a 4-m-long Yb3+-doped homemade large mode area (LMA) double-clad fiber is reported. The system emits up to 133.8 W of amplified radiation at a wavelength of 1064 nm and a repetition rate of 100 kHz, limited only by the available pump power. Peak power of 300 kW at 20 kHz with a pulse duration of 15 ns is obtained. (c) 2006 Society of Photo-Optical Instrumentation Engineers.

High power single transverse mode operation of a tapered large-mode-area fiber laser

To get high output power with good beam quality, a tapered section is introduced to large-mode-area (LMA) Yb-doped fiber laser. Output characteristics of the fiber laser without tapered section and with tapered section are compared experimentally. When the launched pump power is 119.1 W, 77.9 W with M-2 3.08 and 56.4 W with M-2 1.14 can be obtained, respectively. The corresponding slope efficiencies are 71.8% and 54.1%, respectively. Although output power of the tapered fiber laser has 30.6% penalty, brightness of it is as much as 5.28 times of the fiber laser without tapered section. Moreover, spectra of them are measured. It is found that tapered section makes lasing wavelength of the fiber laser shorter. (c) 2007 Elsevier B.V. All rights reserved.

An Evaluation of the area stratification used for sampling tunas in the eastern Pacific Ocean and implications for estimating total annual catches

The Inter-American Tropical Tuna Commission (IATTC) staff has been sampling the size distributions of tunas in the eastern Pacific Ocean (EPO) since 1954, and the species composition of the catches since 2000. The IATTC staff use the data from the species composition samples, in conjunction with observer and/or logbook data, and unloading data from the canneries to estimate the total annual catches of yellowfin (Thunnus albacares), skipjack (Katsuwonus pelamis), and bigeye (Thunnus obesus) tunas. These sample data are collected based on a stratified sampling design. I propose an update of the stratification of the EPO into more homogenous areas in order to reduce the variance in the estimates of the total annual catches and incorporate the geographical shifts resulting from the expansion of the floating-object fishery during the 1990s. The sampling model used by the IATTC is a stratified two-stage (cluster) random sampling design with first stage units varying (unequal) in size. The strata are month, area, and set type. Wells, the first cluster stage, are selected to be sampled only if all of the fish were caught in the same month, same area, and same set type. Fish, the second cluster stage, are sampled for lengths, and independently, for species composition of the catch. The EPO is divided into 13 sampling areas, which were defined in 1968, based on the catch distributions of yellowfin and skipjack tunas. This area stratification does not reflect the multi-species, multi-set-type fishery of today. In order to define more homogenous areas, I used agglomerative cluster analysis to look for groupings of the size data and the catch and effort data for 2000–2006. I plotted the results from both datasets against the IATTC Sampling Areas, and then created new areas. I also used the results of the cluster analysis to update the substitution scheme for strata with catch, but no sample. I then calculated the total annual catch (and variance) by species by stratifying the data into new Proposed Sampling Areas and compared the results to those reported by the IATTC. Results showed that re-stratifying the areas produced smaller variances of the catch estimates for some species in some years, but the results were not significant.

Analysis of the differences between the rates of inflation associated with two aggregate price level: The case of the euro area and the United States

Idioma: Inglés Abstract: This project focuses on two indicators of prices, the GDP deflator and the consumer price index (CPI), and analyzes the differences and similarities they present. These price indexes have been chosen taking into account its great representativeness and importance to economic and social level, and its direct relationship to the overall functioning of the economy and, in particular, inflation. It should be also mentioned that this study was conducted for cases of the euro area and the United States, as the impact of these economies in the economic and social situation at international level is very significant.

Report upon the commercial fisheries in the Lancashire River Authority Area and their effect upon rod angling and spawning stock in the rivers and particularly the River Lune

The stock of salmon in any river is largely dependent upon the escapement of sufficient fish to ensure that an adequate quantity of ova is deposited and full use is made of all suitable spawning areas. At the present time, no accurate information is available on the numbers of fish entering rivers. Therefore, catch returns provide valuable information on fish stocks. This report summarises the catch returns for salmon in the Lancashire River Authority in the North of England for the years 1960-1964. Rivers included are the Lune, Ribble, Kent, Leven and Duddon.

Plan de internacionalización de una empresa industrial concreta (area marketing)

[ES]Este proyecto recoge el plan de internacionalización comercial a Brasil, Marruecos y Francia de la empresa de ámbito industrial; concretamente del sector de la siderurgia, en adelante, A.P.S., que se dedica a la elaboración de productos auxiliares para la desulfuración del acero. El plan se ha desarrollado de forma que impulse a la empresa a cumplir una serie de objetivos como son un mayor crecimiento, mejora de la rentabilidad o un aumento de cuota de mercado, entre otros. Las pautas seguidas en la elaboración del plan de acciones, han sido desarrolladas gracias a un adecuado análisis tanto para la empresa como para el entorno, que ha sido de especial ayuda para ajustarnos a las necesidades de esta.