Numerical modeling of optical levitation and trapping of the "stuck" particles with a pulsed optical tweezers

We present the theoretical analysis and the numerical modeling of optical levitation and trapping of the stuck particles with a pulsed optical tweezers. In our model, a pulsed laser was used to generate a large gradient force within a short duration that overcame the adhesive interaction between the stuck particles and the surface; and then a low power continuous - wave (cw) laser was used to capture the levitated particle. We describe the gradient force generated by the pulsed optical tweezers and model the binding interaction between the stuck beads and glass surface by the dominative van der Waals force with a randomly distributed binding strength. We numerically calculate the single pulse levitation efficiency for polystyrene beads as the function of the pulse energy, the axial displacement from the surface to the pulsed laser focus and the pulse duration. The result of our numerical modeling is qualitatively consistent with the experimental result. (C) 2005 Optical Society of America.

Injection Locked Clocking and Transmitter Equalization Techniques for Chip to Chip Interconnects

Semiconductor technology scaling has enabled drastic growth in the computational capacity of integrated circuits (ICs). This constant growth drives an increasing demand for high bandwidth communication between ICs. Electrical channel bandwidth has not been able to keep up with this demand, making I/O link design more challenging. Interconnects which employ optical channels have negligible frequency dependent loss and provide a potential solution to this I/O bandwidth problem. Apart from the type of channel, efficient high-speed communication also relies on generation and distribution of multi-phase, high-speed, and high-quality clock signals. In the multi-gigahertz frequency range, conventional clocking techniques have encountered several design challenges in terms of power consumption, skew and jitter. Injection-locking is a promising technique to address these design challenges for gigahertz clocking. However, its small locking range has been a major contributor in preventing its ubiquitous acceptance.

In the first part of this dissertation we describe a wideband injection locking scheme in an LC oscillator. Phase locked loop (PLL) and injection locking elements are combined symbiotically to achieve wide locking range while retaining the simplicity of the latter. This method does not require a phase frequency detector or a loop filter to achieve phase lock. A mathematical analysis of the system is presented and the expression for new locking range is derived. A locking range of 13.4 GHz–17.2 GHz (25%) and an average jitter tracking bandwidth of up to 400 MHz are measured in a high-Q LC oscillator. This architecture is used to generate quadrature phases from a single clock without any frequency division. It also provides high frequency jitter filtering while retaining the low frequency correlated jitter essential for forwarded clock receivers.

To improve the locking range of an injection locked ring oscillator; QLL (Quadrature locked loop) is introduced. The inherent dynamics of injection locked quadrature ring oscillator are used to improve its locking range from 5% (7-7.4GHz) to 90% (4-11GHz). The QLL is used to generate accurate clock phases for a four channel optical receiver using a forwarded clock at quarter-rate. The QLL drives an injection locked oscillator (ILO) at each channel without any repeaters for local quadrature clock generation. Each local ILO has deskew capability for phase alignment. The optical-receiver uses the inherent frequency to voltage conversion provided by the QLL to dynamically body bias its devices. A wide locking range of the QLL helps to achieve a reliable data-rate of 16-32Gb/s and adaptive body biasing aids in maintaining an ultra-low power consumption of 153pJ/bit.

From the optical receiver we move on to discussing a non-linear equalization technique for a vertical-cavity surface-emitting laser (VCSEL) based optical transmitter, to enable low-power, high-speed optical transmission. A non-linear time domain optical model of the VCSEL is built and evaluated for accuracy. The modelling shows that, while conventional FIR-based pre-emphasis works well for LTI electrical channels, it is not optimum for the non-linear optical frequency response of the VCSEL. Based on the simulations of the model an optimum equalization methodology is derived. The equalization technique is used to achieve a data-rate of 20Gb/s with power efficiency of 0.77pJ/bit.

卫星激光通信Ⅰ链路和终端技术

卫星激光通信具有巨大的潜在应用价值, 国际上已实现高码率、小型化、轻量化和低功耗激光通信终端, 全文的第一部分即“链路和终端技术”综述了卫星激光通信的国外进展, 介绍了终端的关键技术, 讨论了终端设计思想。第二部分(另文)将讨论和介绍卫星激光通信终端地面检测和验证技术。

A large-area photolithography technique based on surface plasmons leakage modes

An atomic force microscope (AFM) assisted surface plasmons leakage radiation photolithography technique has been numerically demonstrated by using two-dimensional finite-difference time-domain (2D-FDTD) method. With the aid of a metallic AFM tip, particular characteristic of the Kretstchmann configuration to excite surface plasmons (SPs) is utilized to achieve large-area patterns with high spatial resolution and contrast, the photoresist could be exposed with low power laser due to the remarkable local field enhancement at the metal/dielectric interface and the resonant localized SPs modes near the tip. Good tolerance on the film thickness and incident angle has been obtained, which provides a good practicability for experiments. This photolithography technique proposed here can realize large-area, high-resolution, high-contrast, nondestructive, arbitrary-structure fabrication of nanoscale devices. (c) 2007 Elsevier B.V. All rights reserved.

Diseño de un sistema para la detección y caracterización de impactos sobre estructuras.

[ES]Este documento pretende describir de manera clara y concisa la creacion de un dispositivo detector de impactos para estructuras de avion durante su transporte de muy bajo consumo, desde su concepcion como idea hasta su montaje, programacion y posterior comprobacion. El objetivo sera la culminacion exitosa del producto para mas adelante exponerlo ante posibles compradores y/o investigadores. Este dispositivo esta compuesto de tres partes, una unidad de adquisicion y adecuacion de la señal, que ser a recogida por un piezoelectrico; la unidad de inteligencia, que sera un microcontrolador programado en ensamblador mediante la herramienta MPLAB y un chip de radio, que se encargara de transmitir los datos a una unidad mas potente, lease un PC, tablet, movil...

Hardware reconfigurável para identificação de radionuclídeos utilizando o método de agrupamento subtrativo.

Fontes radioativas possuem radionuclídeos. Um radionuclídeo é um átomo com um núcleo instável, ou seja, um núcleo caracterizado pelo excesso de energia que está disponível para ser emitida. Neste processo, o radionuclídeo sofre o decaimento radioativo e emite raios gama e partículas subatômicas, constituindo-se na radiação ionizante. Então, a radioatividade é a emissão espontânea de energia a partir de átomos instáveis. A identificação correta de radionuclídeos pode ser crucial para o planejamento de medidas de proteção, especialmente em situações de emergência, definindo o tipo de fonte de radiação e seu perigo radiológico. Esta dissertação apresenta a aplicação do método de agrupamento subtrativo, implementada em hardware, para um sistema de identificação de elementos radioativos com uma resposta rápida e eficiente. Quando implementados em software, os algoritmos de agrupamento consumem muito tempo de processamento. Assim, uma implementação dedicada para hardware reconfigurável é uma boa opção em sistemas embarcados, que requerem execução em tempo real, bem como baixo consumo de energia. A arquitetura proposta para o hardware de cálculo do agrupamento subtrativo é escalável, permitindo a inclusão de mais unidades de agrupamento subtrativo para operarem em paralelo. Isso proporciona maior flexibilidade para acelerar o processo de acordo com as restrições de tempo e de área. Os resultados mostram que o centro do agrupamento pode ser identificado com uma boa eficiência. A identificação desses pontos pode classificar os elementos radioativos presentes em uma amostra. Utilizando este hardware foi possível identificar mais do que um centro de agrupamento, o que permite reconhecer mais de um radionuclídeo em fontes radioativas. Estes resultados revelam que o hardware proposto pode ser usado para desenvolver um sistema portátil para identificação radionuclídeos.

Análise multielementar em folhas de Nerium oleander L. usando fluorescência de raios X por dispersão em energia

Desde o início do século XX, a poluição do ar nos grandes centros piorou em consequência processo de industrialização e urbanização, juntamente com o rápido crescimento populacional e do transporte motorizado. Algumas espécies de plantas absorvem os poluentes atmosféricos pelas suas folhas e então, fixa-os em sua matriz, tornando-se assim um biomonitor de poluição nessa área. Assim, a análise foliar dessas espécies de vegetal pode ser usado como monitoramento ambiental. Uma das plantas que tem a habilidade de reter certos elementos químicos do ambiente e pode ser usada como biomonitor é a Nerium oleander L.. Neste estudo utilizou-se folhas de Nerium oleander L. para avaliar os níveis de poluição ambiental em uma sub-região da Região Metropolitana do Rio de Janeiro através da Fluorescência de Raios X (EDXRF). O sistema de EDXRF foi desenvolvido no próprio laboratório e consiste de um sistema portátil de XRF formado por um mini tubo raio X de baixa potência (anodo de Ag e operação em 20 kV/50 μA) e um detector de SiPIN. As amostras de Nerium oleander L. foram coletadas de plantas adultas. As amostras foram coletadas durante as quatros estações do ano (verão, outono, inverno e primavera). Todas as folhas foram coletadas a uma distância superior de 1,5 m em relação ao solo. As amostras foram acondicionadas em sacos plásticos e depois da chegada ao laboratório foram colocados sob refrigeração a 5 C. No laboratório, as amostras foram limpas com um pincel com cerdas macias para retirar a poeira. Depois disso, as amostras foram colocadas na estufa a 60 C por 48 h. Em seguida, as amostras foram pulverizadas (44 μm). Depois desse processo, alíquotas de 500 mg de massa foram prensadas a uma pressão de 2.32×108 por cerca de 15 minutos, afim de se obter pastilhas finas com diâmetro de 2,54 cm e densidade superficial de 100 mg/cm2. Foi possível detectar a concentração de 13 elementos: S, Cl, K, Ca, Mn, Fe, Cu, Zn, Br, Rb, Sr, Ba e Pb. A partir da concentração de cada elemento foram obtidos os mapas de distribuição elementar da área de estudo para cada estação. A análise da correlação de Pearson mostrou que existe uma correlação significativa entre os elementos Fe, Zn, Ba e Pb, entre os elementos Ca e Sr e entre os elementos Cl, K, Rb. A análise do PCA (Análise por Componentes Principais) mostrou que existem dois fatores principais da emissão de poluição ambiental: emissão por ressuspensão do solo (Cl, K, Ca, Mn, Rb e Sr) e emissões veiculares e industriais (Fe, Zn, Ba e Pb). O estudo da poluição ambiental através da técnica de EDXRF utilizando folhas de Nerium oleander L. como biomonitor se mostrou uma técnica de baixo custo e eficiência substancial na determinação da concentração elementar dos poluentes atmosféricos.

Estimating Dungeness crab (Cancer magister) abundance: crab pots and dive transects compared

Dungeness crabs (Cancer magister) were sampled with commercial pots and counted by scuba divers on benthic transects at eight sites near Glacier Bay, Alaska. Catch per unit of effort (CPUE) from pots was compared to the density estimates from dives to evaluate the bias and power of the two techniques. Yearly sampling was conducted in two seasons: April and September, from 1992 to 2000. Male CPUE estimates from pots were significantly lower in April than in the following September; a step-wise regression demonstrated that season accounted for more of the variation in male CPUE than did temperature. In both April and September, pot sampling was significantly biased against females. When females were categorized as ovigerous and nonovigerous, it was clear that ovigerous females accounted for the majority of the bias because pots were not biased against nonovigerous females. We compared the power of pots and dive transects in detecting trends in populations and found that pots had much higher power than dive transects. Despite their low power, the dive transects were very useful for detecting bias in our pot sampling and in identifying the optimal times of year to sample so that pot bias could be avoided.

Switching speed enhancement of the LDMOSFETs using partial-SOI technology

To overcome reduced breakdown voltage and self-heating effects inherent in silicon-on-insulator (SOI) power integrated circuits while still maintaining good isolation between low power CMOS circuits and the high power cells, partial SOI (PSOI) technology has been proposed. PSOI devices make use of both buried oxide and substrate depletion to support the breakdown voltage. 2D analyses and modeling of parasitic capacitances in PSOI structures show that PSOI-lightly doped MOSFETs can increase the switching speed by as much as four times compared to conventional SOI structures, making them very attractive for high switching applications.

Smart chemical sensor application of ZnO nanowires grown on CMOS compatible SOI microheater platform

Smart chemical sensor based on CMOS(complementary metal-oxide- semiconductor) compatible SOI(silicon on insulator) microheater platform was realized by facilitating ZnO nanowires growth on the small membrane at the relatively low temperature. Our SOI microheater platform can be operated at the very low power consumption with novel metal oxide sensing materials, like ZnO or SnO2 nanostructured materials which demand relatively high sensing temperature. In addition, our sol-gel growth method of ZnO nanowires on the SOI membrane was found to be very effective compared with ink-jetting or CVD growth techniques. These combined techniques give us the possibility of smart chemical sensor technology easily merged into the conventional semiconductor IC application. The physical properties of ZnO nanowire network grown by the solution-based method and its chemical sensing property also were reported in this paper.

Adaptive modally addressed liquid crystal lenses

An adaptive lens, which has variable focus and is rapidly controllable with simple low-power electronics, has numerous applications in optical telecommunications devices, 3D display systems, miniature cameras and adaptive optics. The University of Durham is developing a range of adaptive liquid crystal lenses, and here we describe work on construction of modal liquid crystal lenses. This type of lens was first described by Naumov [1] and further developed by others [24]. In this system, a spatially varying and circularly symmetric voltage profile can be generated across a liquid-crystal cell, generating a lens-like refractive index profile. Such devices are simple in design, and do not require a pixellated structure. The shape and focussing power of the lens can be controlled by the variation of applied electric field and frequency. Results show adaptive lenses operating at optical wavelengths with continuously variable focal lengths from infinity to 70 cm. Switching speeds are of the order of 1 second between focal positions. Manufacturing methods of our adaptive lenses are presented, together with the latest results to the performance of these devices.

Optimum Magnetic Circuit Configurations for Permanent Magnet Aerospace Generators

In the design of high-speed low-power electrical generators for unmanned aircraft and spacecraft, maximization of specific output (power/weight) is of prime importance. Several magnetic circuit configurations (radial-field, axial-field, flux-squeezing, homopolar) have been proposed, and in this paper the relative merits of these configurations are subjected to a quantitative investigation over the speed range 10 000–100000 rev/min and power range 250 W-10 kW. The advantages of incorporating new high energy-density magnetic materials are described. Part I deals with establishing an equivalent circuit for permanent-magnet generators. For each configuration the equivalent circuit parameters are related to the physical dimensions of the generator components and an optimization procedure produces a minimum volume design at discrete output powers and operating speeds. The technique is illustrated by a quantitative comparison of the specific outputs of conventional radial-field generators with samarium cobalt and alnico magnets. In Part II the specific outputs of conventional, flux-squeezing, and claw-rotor magnetic circuit configurations are compared. The flux-squeezing configuration is shown to produce the highest specific output for small sizes whereas the conventional configuration is best at large sizes. For all sizes the claw-rotor configuration is significantly inferior. In Part III the power densities available from axial-field and flux-switching magnetic circuit configurations are maximized, over the power range 0.25-10 kW and speed range 10 000–100000 rpm, and compared to the results of Parts I & II. For the axial-field configuration the power density is always less than that of the conventional and flux-squeezing radial-field configurations. For the flux-switching generator, which is able to withstand relatively high mechanical forces in the rotor, the power density is again inferior to the radial-field types, but the difference is less apparent for small (low power, high speed) generator sizes. From the combined results it can be concluded that the flux-squeezing and conventional radial-field magnetic circuit configurations yield designs with minimum volume over the power and speed ranges considered. © 1985, IEEE. All rights reserved.

High temperature robust SOI ethanol sensor

In this paper we present a robust SOI-CMOS ethanol sensor based on a tungsten-doped lanthanum iron oxide sensing material. The device shows response to gas, has low power consumption, good uniformity, high temperature stability and can be manufactured at low cost and with integrated circuitry. The platform is a tungsten-based CMOS micro-hotplate that has been shown to be stable for over two thousand hours at a high temperature (600°C) in a form of accelerated life test. The tungsten-doped lanthanum iron oxide was deposited on the micro-hotplate as a slurry with terpineol using a syringe, dried and annealed. Preliminary gas testing was done and the material shows response to ethanol vapour. These results are promising and we believe that this combination of a robust CMOS micro-hotplate and a good sensing material can form the basis for a commercial CMOS gas sensor. © 2011 Published by Elsevier Ltd.

NEMS based logic and memory circuits

Carbon nanotube (CNT) based nano electromechanical system (NEMS) were developed to apply to the logic and the memory circuit. The electrical 'on-off' behavior induced by the mechanical movements of CNTs can promise low power consumption in circuit with very low level leakage current. Additionally, the unique vertical structure of nanotubes allows high integration density for devices. © 2012 IEEE.

Photomechanically Induced Phase Transitions in Ferroelectric Liquid Crystals

We report optically induced phase transtions occurring in two different host ferroelectric liquid crystals; SCE13 a multicomponentmixture optimised for room temperature performance, and CE8 a single component liquid crystal. These act as host liquid crystals for a novel guest azo dye, which can be made to photoisomerise using low power density U.V. illumination, resulting in dramatic changes in sample properties. We have shown that the magnitude of spontaneous polarisation of systems can be isothermally and reversibly induced or reduced, with the consequent appearance or disappearance of optical switching hysteresis. We discuss the parameters controlling the behaviour of the systems under U.V. illumination and suggest mechansims by which the transitions may occur. © 1993, Taylor & Francis Group, LLC. All rights reserved.