RETINAL ANGIOMATOUS PROLIFERATION: A Quantitative Analysis of the Fundoscopic Features of the Fellow Eye

PURPOSE: To quantitatively analyze and compare the fundoscopic features between fellow eyes of retinal angiomatous proliferation and typical exudative age-related macular degeneration and to identify possible predictors of neovascularization. METHODS: Retrospective case-control study. Seventy-nine fellow eyes of unilateral retinal angiomatous proliferation (n = 40) and typical exudative age-related macular degeneration (n = 39) were included. Fundoscopic features of the fellow eyes were assessed using digital color fundus photographs taken at the time of diagnosis of neovascularization in the first affected eye. Grading was performed by two independent graders using RetmarkerAMD, a computer-assisted grading software based on the International Classification and Grading System for age-related macular degeneration. RESULTS: Baseline total number and area (square micrometers) of drusen in the central 1,000, 3,000, and 6,000 μm were considerably inferior in the fellow eyes of retinal angiomatous proliferation, with statistically significant differences (P < 0.05) observed in virtually every location (1,000, 3,000, and 6,000 μm). A soft drusen (≥125 μm) area >510,196 μm2 in the central 6,000 μm was associated with an increased risk of neovascularization (hazard ratio, 4.35; 95% confidence interval [1.56-12.15]; P = 0.005). CONCLUSION: Baseline fundoscopic features of the fellow eye differ significantly between retinal angiomatous proliferation and typical exudative age-related macular degeneration. A large area (>510,196 μm2) of soft drusen in the central 6,000 μm confers a significantly higher risk of neovascularization and should be considered as a phenotypic risk factor.

Sistema de notificação e monitorização de acidentes para motociclos

A percentagem de utilização de motociclos tem vindo a crescer relativamente à utilização de veículos automóveis. Provavelmente, este número continuará a aumentar anualmente devido a diversos fatores: a mobilidade, a flexibilidade de circulação e o menor gasto de combustível. No entanto, um dos principais problemas da condução de motociclos é o elevado risco de acidente, comparativamente com os veículos automóveis. A segurança do condutor e passageiros, quando sujeitos a um acidente, merece total atenção. Convém, pois, encontrar soluções com capacidade de prevenir ou ajudar a minimizar o número de mortalidade que possam ocorrer diariamente. Uma maior atenção às medidas de segurança rodoviária veio diminuir o número de acidentes, no entanto, quando estes acontecem, a ajuda das unidades médicas demora algum tempo a chegar. Sabe-se que nestas situações, qualquer segundo pode fazer a diferença. Este é o problema que o autor deseja resolver. Na presente dissertação, o autor pretende demonstrar como desenvolveu um sistema para motociclos com a capacidade de reconhecer um acidente, enviando um alerta (SMS) com a informação do local da ocorrência (GPS). Este sistema foi preparado para operar em locais isolados com pouco ou nenhum tráfego rodoviário. Implementou-se no referido sistema uma tecnologia sem fios e fiabilizou-se um método capaz de ser utilizado em diversos modelos de motociclos. Procedeu-se à realização de interfaces que permitem monitorizar e possibilitar o reconhecimento da informação sobre o condutor e sobre o acidente, em tempo real.

Optimização dos consumos de água na irrigação de campos golfe

A presente dissertação propõe o desenvolvimento de um sistema de Irrigação de baixo custo para campos de Golfe. Este sistema é capaz de recolher a previsão meteorológica e ainda medir um conjunto de valores (temperatura, humidade, velocidade do vento) que determina quando e quanto regar. Os campos de Golfe consumem diariamente elevadas quantidades de água, sendo esta a principal crítica feita pelas organizações ambientais. Esta dissertação incorpora uma comunicação sem fios de baixo custo, que dispensa a cablagem que é necessária para haver comunicação entre os diversos equipamentos, que estão distribuídos pelo campo de Golfe. O sistema desenvolvido pretende reduzir os desperdícios dos recursos hídricos na rega, pois é um sistema inteligente que poderá ser adquirido não só por gestores de campos de Golfe, mas também por jardins residenciais e municipais. Com o objetivo de criar um sistema de baixo custo foi elaborado um algoritmo de reencaminhamento de mensagens, que permite utilizar equipamentos de comunicação sem fios de baixo custo. Todo o sistema de Irrigação é controlado e monitorizado através de uma interface, desenvolvida em Microsoft Visual Basic.

Impact of node mobility in user-centric routing

Recent paradigms in wireless communication architectures describe environments where nodes present a highly dynamic behavior (e.g., User Centric Networks). In such environments, routing is still performed based on the regular packet-switched behavior of store-and-forward. Albeit sufficient to compute at least an adequate path between a source and a destination, such routing behavior cannot adequately sustain the highly nomadic lifestyle that Internet users are today experiencing. This thesis aims to analyse the impact of the nodes’ mobility on routing scenarios. It also aims at the development of forwarding concepts that help in message forwarding across graphs where nodes exhibit human mobility patterns, as is the case of most of the user-centric wireless networks today. The first part of the work involved the analysis of the mobility impact on routing, and we found that node mobility significance can affect routing performance, and it depends on the link length, distance, and mobility patterns of nodes. The study of current mobility parameters showed that they capture mobility partially. The routing protocol robustness to node mobility depends on the routing metric sensitivity to node mobility. As such, mobility-aware routing metrics were devised to increase routing robustness to node mobility. Two categories of routing metrics proposed are the time-based and spatial correlation-based. For the validation of the metrics, several mobility models were used, which include the ones that mimic human mobility patterns. The metrics were implemented using the Network Simulator tool using two widely used multi-hop routing protocols of Optimized Link State Routing (OLSR) and Ad hoc On Demand Distance Vector (AODV). Using the proposed metrics, we reduced the path re-computation frequency compared to the benchmark metric. This means that more stable nodes were used to route data. The time-based routing metrics generally performed well across the different node mobility scenarios used. We also noted a variation on the performance of the metrics, including the benchmark metric, under different mobility models, due to the differences in the node mobility governing rules of the models.

Electrolytic cells for plastic waste recycling

The current project assesses potential molten alloy anodes for Solid Oxide Fuel Cells (SOFC) running on solid waste. A detailed phase diagram study was performed to locate probable anode systems. The molten metal oxide system PbO-Sb2O3 was selected as a possible molten alloy anode for this application. A detailed vapour pressure study of this system was performed. Several cells were fabricated to experimentally assess the electrochemical properties of this system. The work reveals several unexpected limiting features such as the incompatibility between the platinum and the chosen alloy. A second cell was built, this time using rhenium wires instead, preventing such reaction. However, the rhenium wire sublimes under oxidizing conditions (air) and the sealing glass and the chosen alloy system react with each other under long term use. Considering all these issues, a third cell design was conceived, surpassing some obstacles and providing some initial information regarding the electrochemical behaviour. The current project shows that many parameters need to be taken into account to ensure materials compatibility. For the PbOSb2O3 system, the high volatility of Sb2O3 was a serious limitation that can only be addressed through the application of new contact wires or sealing materials and conditions. Nonetheless, the project highlights several other potential systems that can be considered, such as Pb11Ge3O17, Pb3GeO5, Pb5Ge3O11, Bi2CuO4, Bi2PdO4, Bi12GeO20.

Error correcting codes for visible light communication systems

Over the past few years, the number of wireless networks users has been increasing. Until now, Radio-Frequency (RF) used to be the dominant technology. However, the electromagnetic spectrum in these region is being saturated, demanding for alternative wireless technologies. Recently, with the growing market of LED lighting, the Visible Light Communications has been drawing attentions from the research community. First, it is an eficient device for illumination. Second, because of its easy modulation and high bandwidth. Finally, it can combine illumination and communication in the same device, in other words, it allows to implement highly eficient wireless communication systems. One of the most important aspects in a communication system is its reliability when working in noisy channels. In these scenarios, the received data can be afected by errors. In order to proper system working, it is usually employed a Channel Encoder in the system. Its function is to code the data to be transmitted in order to increase system performance. It commonly uses ECC, which appends redundant information to the original data. At the receiver side, the redundant information is used to recover the erroneous data. This dissertation presents the implementation steps of a Channel Encoder for VLC. It was consider several techniques such as Reed-Solomon and Convolutional codes, Block and Convolutional Interleaving, CRC and Puncturing. A detailed analysis of each technique characteristics was made in order to choose the most appropriate ones. Simulink models were created in order to simulate how diferent codes behave in diferent scenarios. Later, the models were implemented in a FPGA and simulations were performed. Hardware co-simulations were also implemented to faster simulation results. At the end, diferent techniques were combined to create a complete Channel Encoder capable of detect and correct random and burst errors, due to the usage of a RS(255,213) code with a Block Interleaver. Furthermore, after the decoding process, the proposed system can identify uncorrectable errors in the decoded data due to the CRC-32 algorithm.

Nonlinear distortion generation mechanisms in Doherty amplifiers

Nowadays, wireless communications systems demand for greater mobility and higher data rates. Moreover, the need for spectral efficiency requires the use of non-constant envelope modulation schemes. Hence, power amplifier designers have to build highly efficient, broadband and linear amplifiers. In order to fulfil these strict requirements, the practical Doherty amplifier seems to be the most promising technique. However, due to its complex operation, its nonlinear distortion generation mechanisms are not yet fully understood. Currently, only heuristic interpretations are being used to justify the observed phenomena. Therefore, the main objective of this work is to provide a model capable of describing the Doherty power amplifier nonlinear distortion generation mechanisms, allowing the optimization of its design according to linearity and efficiency criteria. Besides that, this approach will allow a bridge between two different worlds: power amplifier design and digital pre-distortion since the knowledge gathered from the Doherty operation will serve to select the most suitable pre-distortion models.

Street lighting mesh network protocol

The digital revolution of the 21st century contributed to stem the Internet of Things (IoT). Trillions of embedded devices using the Internet Protocol (IP), also called smart objects, will be an integral part of the Internet. In order to support such an extremely large address space, a new Internet Protocol, called Internet Protocol Version 6 (IPv6) is being adopted. The IPv6 over Low Power Wireless Personal Area Networks (6LoWPAN) has accelerated the integration of WSNs into the Internet. At the same time, the Constrained Application Protocol (CoAP) has made it possible to provide resource constrained devices with RESTful Web services functionalities. This work builds upon previous experience in street lighting networks, for which a proprietary protocol, devised by the Lighting Living Lab, was implemented and used for several years. The proprietary protocol runs on a broad range of lighting control boards. In order to support heterogeneous applications with more demanding communication requirements and to improve the application development process, it was decided to port the Contiki OS to the four channel LED driver (4LD) board from Globaltronic. This thesis describes the work done to adapt the Contiki OS to support the Microchip TM PIC24FJ128GA308 microprocessor and presents an IP based solution to integrate sensors and actuators in smart lighting applications. Besides detailing the system’s architecture and implementation, this thesis presents multiple results showing that the performance of CoAP based resource retrievals in constrained nodes is adequate for supporting networking services in street lighting networks.

RETINAL ANGIOMATOUS PROLIFERATION: A Quantitative Analysis of the Fundoscopic Features of the Fellow Eye

PURPOSE: To quantitatively analyze and compare the fundoscopic features between fellow eyes of retinal angiomatous proliferation and typical exudative age-related macular degeneration and to identify possible predictors of neovascularization. METHODS: Retrospective case-control study. Seventy-nine fellow eyes of unilateral retinal angiomatous proliferation (n = 40) and typical exudative age-related macular degeneration (n = 39) were included. Fundoscopic features of the fellow eyes were assessed using digital color fundus photographs taken at the time of diagnosis of neovascularization in the first affected eye. Grading was performed by two independent graders using RetmarkerAMD, a computer-assisted grading software based on the International Classification and Grading System for age-related macular degeneration. RESULTS: Baseline total number and area (square micrometers) of drusen in the central 1,000, 3,000, and 6,000 μm were considerably inferior in the fellow eyes of retinal angiomatous proliferation, with statistically significant differences (P < 0.05) observed in virtually every location (1,000, 3,000, and 6,000 μm). A soft drusen (≥125 μm) area >510,196 μm2 in the central 6,000 μm was associated with an increased risk of neovascularization (hazard ratio, 4.35; 95% confidence interval [1.56-12.15]; P = 0.005). CONCLUSION: Baseline fundoscopic features of the fellow eye differ significantly between retinal angiomatous proliferation and typical exudative age-related macular degeneration. A large area (>510,196 μm2) of soft drusen in the central 6,000 μm confers a significantly higher risk of neovascularization and should be considered as a phenotypic risk factor.

Mobility in vehicular networks with multiple access points to the infrastructure

Nowadays there is a huge evolution in the technological world and in the wireless networks. The electronic devices have more capabilities and resources over the years, which makes the users more and more demanding. The necessity of being connected to the global world leads to the arising of wireless access points in the cities to provide internet access to the people in order to keep the constant interaction with the world. Vehicular networks arise to support safety related applications and to improve the traffic flow in the roads; however, nowadays they are also used to provide entertainment to the users present in the vehicles. The best way to increase the utilization of the vehicular networks is to give to the users what they want: a constant connection to the internet. Despite of all the advances in the vehicular networks, there were several issues to be solved. The presence of dedicated infrastructure to vehicular networks is not wide yet, which leads to the need of using the available Wi-Fi hotspots and the cellular networks as access networks. In order to make all the management of the mobility process and to keep the user’s connection and session active, a mobility protocol is needed. Taking into account the huge number of access points present at the range of a vehicle for example in a city, it will be beneficial to take advantage of all available resources in order to improve all the vehicular network, either to the users and to the operators. The concept of multihoming allows to take advantage of all available resources with multiple simultaneous connections. This dissertation has as objectives the integration of a mobility protocol, the Network-Proxy Mobile IPv6 protocol, with a host-multihoming per packet solution in order to increase the performance of the network by using more resources simultaneously, the support of multi-hop communications, either in IPv6 or IPv4, the capability of providing internet access to the users of the network, and the integration of the developed protocol in the vehicular environment, with the WAVE, Wi-Fi and cellular technologies. The performed tests focused on the multihoming features implemented on this dissertation, and on the IPv4 network access for the normal users. The obtained results show that the multihoming addition to the mobility protocol improves the network performance and provides a better resource management. Also, the results show the correct operation of the developed protocol in a vehicular environment.

Optical Wireless Communication for Mobile Platforms

The past few decades have witnessed the widespread adaptation of wireless devices such as cellular phones and Wifi-connected laptops, and demand for wireless communication is expected to continue to increase. Though radio frequency (RF) communication has traditionally dominated in this application space, recent decades have seen an increasing interest in the use of optical wireless (OW) communication to supplement RF communications. In contrast to RF communication technology, OW systems offer the use of largely unregulated electromagnetic spectrum and large bandwidths for communication. They also offer the potential to be highly secure against jamming and eavesdropping. Interest in OW has become especially keen in light of the maturation of light-emitting diode (LED) technology. This maturation, and the consequent emerging ubiquity of LED technology in lighting systems, has motivated the exploration of LEDs for wireless communication purposes in a wide variety of applications. Recent interest in this field has largely focused on the potential for indoor local area networks (LANs) to be realized with increasingly common LED-based lighting systems. We envision the use of LED-based OW to serve as a supplement to RF technology in communication between mobile platforms, which may include automobiles, robots, or unmanned aerial vehicles (UAVs). OW technology may be especially useful in what are known as RF-denied environments, in which RF communication may be prohibited or undesirable. The use of OW in these settings presents major challenges. In contrast to many RF systems, OWsystems that operate at ranges beyond a few meters typically require relatively precise alignment. For example, some laser-based optical wireless communication systems require alignment precision to within small fractions of a degree. This level of alignment precision can be difficult to maintain between mobile platforms. Additionally, the use of OW systems in outdoor settings presents the challenge of interference from ambient light, which can be much brighter than any LED transmitter. This thesis addresses these challenges to the use of LED-based communication between mobile platforms. We propose and analyze a dual-link LED-based system that uses one link with a wide transmission beam and relaxed alignment constraints to support a more narrow, precisely aligned, higher-data-rate link. The use of an optical link with relaxed alignment constraints to support the alignment of a more precisely aligned link motivates our exploration of a panoramic imaging receiver for estimating the range and bearing of neighboring nodes. The precision of such a system is analyzed and an experimental system is realized. Finally, we present an experimental prototype of a self-aligning LED-based link.

Equine exercise electrocardiogram : standardized lungeing test

Dissertação de Mestrado Integrado em Medicina Veterinária

Sistema de aquisição para monitorização da produção de energia em sistemas de energia renovável

Dissertação de Mestrado, Engenharia Eléctrica e Electrónica, Especialização em Tecnologias de Informação e Telecomunicações, Instituto Superior de Engenharia, Universidade do Algarve, 2014

A correlation aware algorithm for energy efficiency improvement in FiWi networks

Dissertação de Mestrado, Engenharia Informática, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Infância, uma passagem que é de permanência...

A infância é um tecido vivo, dinâmico, cujos fios se entrecruzam na educação. Fios invisíveis, duradouros, que criam laços, permanentes nas suas malhas. Tecer os fios da infância, entrecruzando-os com a educação da sensibilidade é escutar a criança como um todo, constituída por várias partes e múltiplas dimensões, da qual fazem parte muitas pessoas, uma história e uma cultura, que se misturam e se combinam, fazendo de todas as crianças seres humanos únicos e especiais. O relatório que a seguir se apresenta tem como objetivo documentar as aprendizagens realizadas ao longo dos estágios desenvolvidos em contextos de Educação Pré-Escolar e de Ensino do 1.º Ciclo do Ensino Básico. Assim, são narradas experiências-chave, sentidas como as aprendizagens mais significativas ao longo deste processo, que abordam a importância da escuta da criança, do brincar na natureza, da criatividade, incidindo também na importância da afetividade na educação e a escrita criativa e colaborativa e ainda o papel da reflexão na prática do educador, que apesar de aprofundada numa experiência relativa ao contexto de EPE, é transversal às duas práticas pedagógicas.