Quantitative Guidelines for Thin Maintenance Surfaces, TR-435, 2003

What follows are the refined guidelines from the Thin Maintenance Surface: Phase II Report. For that report, test sections were created and monitored along with some existing test sections. From the monitoring and evaluation of these test sections, literature reviews, and the experience and knowledge of the authors, the following guidelines were created. More information about thin maintenance surfaces and their uses can be found in the above-mentioned report.

Ammonium Phosphate/Fly Ash Road Base Construction, HR-294, Construction Report, 1987

The objective of this research project was to evaluate the construction and service performance of ammonium phosphate/fly ash (APFA) treated base courses of crushed fines and/or unprocessed sand. Specific test results related to construction of the test sections were included in the 1987 construction report by Iowa State University. The performance of the experimental sections is dealt with in this final report. This 1986 project demonstrated that in all cases the control sections utilizing a Type B base experienced dramatically less cracking in the surface than the APFA treated base sections. The cost per mix and subsequent surface maintenance costs for the APFA base sections, especially those having a substantial amount of limestone, were higher than the Type B base control sections. This type of construction may prove to be economical only when petroleum product costs escalate.

Iowa Development of Rubblized Concrete Pavement Base Mills County, Construction Report, HR-315, 1990

The concept of rubblizing existing concrete pavement prior to the placement of an asphaltic cement concrete overlay has been around for several years and, in fact, has been tried successfully in the states of New York, Michigan, and Ohio. With available construction and maintenance dollars usually not meeting the demands of the needed work, much of the necessary rehabilitation of existing Portland cement concrete pavements is not being completed when it would be most beneficial. Research project HR-315, "Iowa Development of Rubblized Concrete", has been undertaken to determine the effects of rubblized concrete pavement base as it affects the cracking pattern and longevity of the ACC overlay.

Mobile ERP in the use of maintenance operations of forest industry

Toiminnanohjausjärjestelmien käyttö on muuttanut metsäteollisuuden kunnossapidon työntekijän toimenkuvaa kunnossapidon perustoiminnoista itseohjautuvampaan tietojen käsittelyyn ja jalostamiseen. Työn tavoitteena oliselvittää mobiilin työtilausjärjestelmän vaikutuksia metsäteollisuuden kunnossapidon kenttätyössä. Mobiilin työtilausjärjestelmän käyttö metsäteollisuuden kunnossapidossa mahdollistaa tärkeän kunnossapitotiedon keräämisen ja tarkentamisen kentällä, jossa se usein on ajanmukaisinta ja tarkinta. Haasteellisinta on oikeanlaisen teknologian löytäminen ja standardoiminen kunnossapidon toimintaympäristöihin. Myös organisaation toimintoprosessien on oltava selkeät ennen kuin prosesseja voidaan tehostaa teknologisin keinoin.

Análisis bibliométrico sobre el Aprendizaje Basado en Problemas (ABP) en la educación superior a partir de la base de datos ERIC

[spa]El estudio bibliométrico descriptivo que sigue presenta tendencias de investigación sobre el aprendizaje basado en problemas entre 1974 y 2009. Se sirve de la base de datos ERIC y trabaja con una muestra de 1007 documentos. Se analizan los registros a tenor de cuatro variables: el año de publicación o realización, la titulación, el área de conocimiento y la tipología de investigación. En cuanto a la producción científica, pueden diferenciarse tres fases: la primera, de 1974 a 1989, supone el inicio de las publicaciones y muestra escasa relevancia estadística; la segunda, de crecimiento, durante la década de los 90 del pasado siglo; y la última, de maduración, desde el año 2000 hasta el año 2009. La distribución de los registros por sectores de conocimiento destaca Ciencias de la Salud, Ciencias Sociales y Enseñanzas Técnicas. Las titulaciones en las que más ha proliferado el ABP son Medicina, Económicas, Empresariales, Pedagogía, Formación del Profesorado y el conjunto de las ingenierías.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Análisis del discurso colaborativo en el entorno Knowledge Forum: categorización de los mensajes

El objetivo de esta investigación es conocer la tipología de aportaciones, que se producen en el entorno virtual colaborativo Knowledge Forum y comprobar si está teniendo lugar un aprendizaje colaborativo a través del ordenador (CSCL). Las contribuciones a los diferentes 30 foros han sido analizados y categorizados usando un esquema de codificación en base a las scaffolds o andamiajes que dicho entorno proporciona. Los resultados muestran que en conjunto los 308 estudiantes universitarios aportan nueva información y opinan, pero hay escasez de mensajes con diferentes opiniones que lleven a la discusión y a intercambios de puntos de vista distintos.

Data collection and criticality analysis for cost effective maintenance during the life cycle of a flue gas line

Työn tarkoituksena oli kerätä käyttövarmuustietoa savukaasulinjasta kahdelta suomalaiselta sellutehtaalta niiden käyttöönotosta aina tähän päivään asti. Käyttövarmuustieto koostuu luotettavuustiedoista sekä kunnossapitotiedoista. Kerätyn tiedon avulla on mahdollista kuvata tarkasti laitoksen käyttövarmuutta seuraavilla tunnusluvuilla: suunnittelemattomien häiriöiden lukumäärä ja korjausajat, laitteiden seisokkiaika, vikojen todennäköisyys ja korjaavan kunnossapidon kustannukset suhteessa savukaasulinjan korjaavan kunnossapidon kokonaiskustannuksiin. Käyttövarmuustiedon keräysmetodi on esitelty. Savukaasulinjan kriittisten laitteiden määrittelyyn käytetty metodi on yhdistelmä kyselytutkimuksesta ja muunnellusta vian vaikutus- ja kriittisyysanalyysistä. Laitteiden valitsemiskriteerit lopulliseen kriittisyysanalyysiin päätettiin käyttövarmuustietojen sekä kyselytutkimuksen perusteella. Kriittisten laitteiden määrittämisen tarkoitus on löytää savukaasulinjasta ne laitteet, joiden odottamaton vikaantuminen aiheuttaa vakavimmat seuraukset savukaasulinjan luotettavuuteen, tuotantoon, turvallisuuteen, päästöihin ja kustannuksiin. Tiedon avulla rajoitetut kunnossapidon resurssit voidaan suunnata oikein. Kriittisten laitteiden määrittämisen tuloksena todetaan, että kolme kriittisintä laitetta savukaasulinjassa ovat molemmille sellutehtaille yhteisesti: savukaasupuhaltimet, laahakuljettimet sekä ketjukuljettimet. Käyttövarmuustieto osoittaa, että laitteiden luotettavuus on tehdaskohtaista, mutta periaatteessa samat päälinjat voidaan nähdä suunnittelemattomien vikojen todennäköisyyttä esittävissä kuvissa. Kustannukset, jotka esitetään laitteen suunnittelemattomien kunnossapitokustannusten suhteena savukaasulinjan kokonaiskustannuksiin, noudattelevat hyvin pitkälle luotettavuuskäyrää, joka on laskettu laitteen seisokkiajan suhteena käyttötunteihin. Käyttövarmuustiedon keräys yhdistettynä kriittisten laitteiden määrittämiseen mahdollistavat ennakoivan kunnossapidon oikean kohdistamisen ja ajoittamisen laitteiston elinaikana siten, että luotettavuus- ja kustannustehokkuusvaatimukset saavutetaan.

Phylogenomics Controlling for Base Compositional Bias Reveals a Single Origin of Eusociality in Corbiculate Bees.

As increasingly large molecular data sets are collected for phylogenomics, the conflicting phylogenetic signal among gene trees poses challenges to resolve some difficult nodes of the Tree of Life. Among these nodes, the phylogenetic position of the honey bees (Apini) within the corbiculate bee group remains controversial, despite its considerable importance for understanding the emergence and maintenance of eusociality. Here, we show that this controversy stems in part from pervasive phylogenetic conflicts among GC-rich gene trees. GC-rich genes typically have a high nucleotidic heterogeneity among species, which can induce topological conflicts among gene trees. When retaining only the most GC-homogeneous genes or using a nonhomogeneous model of sequence evolution, our analyses reveal a monophyletic group of the three lineages with a eusocial lifestyle (honey bees, bumble bees, and stingless bees). These phylogenetic relationships strongly suggest a single origin of eusociality in the corbiculate bees, with no reversal to solitary living in this group. To accurately reconstruct other important evolutionary steps across the Tree of Life, we suggest removing GC-rich and GC-heterogeneous genes from large phylogenomic data sets. Interpreted as a consequence of genome-wide variations in recombination rates, this GC effect can affect all taxa featuring GC-biased gene conversion, which is common in eukaryotes.

Operador dipolo-dipolo na base de momento angular: um complemento ao estudo de ressonância magnética nuclear

The relationship between the magnetic dipole-dipole potential energy function and its quantum analogue is presented in this work. It is assumed the reader is familiar with the classical expression of the dipolar interaction and has basic knowledge of the quantum mechanics of angular momentum. Except for these two points only elementary steps are involved.

A formação em Química discutida com base nos modelos proposto por estudantes de pós-graduação para o fenômeno de dissolução

Mental models play an important role in the evolution of an individual's so-called knowledge. Using such representations, students can explain, foresee, and attribute causality to observed phenomena. In the case of Chemistry, the ability to work mentally with models assumes great importance, due to the microscopic component that is characteristic of this science. With the objective of exploring students' ability to work with models, 27 students of the Chemistry Institute of UNESP were asked to describe the mechanisms of dissolution, in water, of NaCl, HCl and HCN, as well as the partial dissolution of I2. Due to difficulties of access to complex descriptors of these processes, each student was asked to explain the phenomena using words and drawings. The results of these investigations were analyzed, and enabled construction of a framework representing the Chemistry students' theoretical training, especially with respect to their most important transferred skill: an ability to model the physical world.

Kenttätietojen hyödyntäminen taajuusmuuttajan luotettavuuden suunnittelussa

Taajuusmuuttaja on yhä yleisempi laite perinteisten oikosulkumoottoreiden nopeuden säädössä, niin teollisuudessa kuin muilla käyttökohteissa. Ensimmäiset laitetyypit olivat mekaanisesti suurikokoisia ja vaativat laitteen tekniseltä tuelta ja kunnossapidolta hyvää teknistä perehtyneisyyttä laitteisiin. Teknologian kehittymisen myötä laitteiden teho/kokosuhde on pienentynyt ja tarjolla on useita eri sovelluskohteisiin suoraan soveltuvia taajuusmuuttajia varustettuna helppokäyttöisillä ja kaupallisilla käyttöliittymillä. Laitteen elinkaaren aikainen luotettavuusjohtaminen edellyttää valmistajalta varsinaisen laitesuunnittelun lisäksi tarkoituksenmukaisia testausmenetelmiä ja kokemusperäistä luotettavuustietoa myös asennetusta laitekannasta. Työssä on käyty taajuusmuuttajan suunnittelun kannalta läpi luotettavuuden käsitteistö sekä yleisimpiä luotettavuusmenetelmiä. Luotettavuusnäkökohtia verrataan asennetusta laitekannasta saatuihin kokemuksiin laitteen valmistajan ja tuotetuen kannalta. Työssä on esitetty luokittelun perusteita ja menetelmät, miten käytön aikana voidaan arvioida laitteen teknistä tilaa sekä huomioida se kunnossapidon suunnittelussa. Johtopäätöksenä huomataan, että asennuspaikka ja käyttösovellus määrittävät taajuusmuuttajan käytettävyyden. Kenttätietoja voidaan hyödyntää paikallisen kunnossapidon kannalta kunnossapidon ja investointien suunnittelussa. Toisaalta valmistajan tuotekehitys saa asennetuista laitteista kokemuksia seuraavan sukupolven tyypin suunnittelun perustaksi. Tekniikan voimakkaan kehittymisen seurauksena uusien taajuusmuuttajatyyppien valmistus kestää yhä lyhyemmän ajanjakson, jolloin asennetusta laitekannasta saatu kenttäkokemus on arvokasta tietoa laitevalmistajalle. Yhteenvetona valmistajan laiterekistereitä voidaan kehittää siten, että niihin on tallennettavissa laitekartoitusten perusteella kerättyä informaatiota, jota niin valmistajan myynti, tuotetuki kuin laitesuunnittelu voi omassa toiminnassaan hyödyntää.

Knowledge Sharing between Generations in an Organisation - Retention of the Old or Building the New?

The study explores knowledge transfer between retiring employees and their successors in expert work. My aim is to ascertain whether there is knowledge development or building new knowledge related to this organisational knowledge transfer between generations; in other words, is the transfer of knowledge from experienced, retiring employees to their successors merely retention of the existing organisational knowledge by distributing it from one individual to another or does this transfer lead to building new and meaningful organisational knowledge. I call knowledge transfer between generations and the possibly related knowledge building in this study knowledge sharing between generations. The study examines the organisation and knowledge management from a knowledge-based and constructionist view. From this standpoint, I see knowledge transfer as an interactive process, and the exploration is based on how the people involved in this process understand and experience the phenomenon studied. The research method is organisational ethnography. I conducted the analysis of data using thematic analysis and the articulation method, which has not been used before in organisational knowledge studies. The primary empirical data consists of theme interviews with twelve employees involved in knowledge transfer in the organisation being studied and five follow-up theme interviews. Six of the interviewees are expert duty employees due to retire shortly, and six are their successors. All those participating in the follow-up interviews are successors of those soon to retire from their expert responsibilities. The organisation in the study is a medium-sized Finnish firm, which designs and manufactures electrical equipment and systems for the global market. The results of the study show that expert work-related knowledge transfer between generations can mean knowledge building which produces new, meaningful knowledge for the organisation. This knowledge is distributed in the organisation to all those that find it useful in increasing the efficiency and competitiveness of the whole organisation. The transfer and building of knowledge together create an act of knowledge sharing between generations where the building of knowledge presupposes transfer. Knowledge sharing proceeds between the expert and the novice through eight phases. During the phases of knowledge transfer the expert guides the novice to absorb the knowledge to be transferred. With the expert’s help the novice gradually comes to understand the knowledge and in the end he or she is capable of using it in his or her work. During the phases of knowledge building the expert helps the novice to further develop the knowledge being transferred so that it becomes new, useful knowledge for the organisation. After that the novice takes the built knowledge to use in his or her work. Based on the results of the study, knowledge sharing between generations takes place in interaction and ends when knowledge is taken to use. The results I obtained in the interviews by the articulation method show that knowledge sharing between generations is shaped by the novices’ conceptions of their own work goals, knowledge needs and duties. These are not only based on the official definition of the work, but also how the novices find their work or how they prioritise the given objectives and responsibilities. The study shows that the novices see their work primarily as maintenance or development. Those primarily involved in maintenance duties do not necessarily need knowledge defined as transferred between generations. Therefore, they do not necessarily transfer knowledge with their assigned experts, even though this can happen in favourable circumstances. They do not build knowledge because their view of their work goals and duties does not require the building of new knowledge. Those primarily involved in development duties, however, do need knowledge available from their assigned experts. Therefore, regardless of circumstances they transfer knowledge with their assigned experts and also build knowledge because their work goals and duties create a basis for building new knowledge. The literature on knowledge transfer between generations has focused on describing either the knowledge being transferred or the means by which it is transferred. Based on the results of this study, however, knowledge sharing between generations, that is, transfer and building is determined by how the novice considers his or her own knowledge needs and work practices. This is why studies on knowledge sharing between generations and its implementation should be based not only on the knowledge content and how it is shared, but also on the context of the work in which the novice interprets and shares knowledge. The existing literature has not considered the possibility that knowledge transfer between generations may mean building knowledge. The results of this study, however, show that this is possible. In knowledge building, the expert’s existing organisational knowledge is combined with the new knowledge that the novice brings to the organisation. In their interaction this combination of the expert’s “old” and the novice’s “new” knowledge becomes new, meaningful organisational knowledge. Previous studies show that knowledge development between the members of an organisation is the prerequisite for organisational renewal which in turn is essential for improved competitiveness. Against this background, knowledge building enables organisational renewal and thus enhances competitiveness. Hence, when knowledge transfer between generations is followed by knowledge building, the organisation kills two birds with one stone. In knowledge transfer the organisation retains the existing knowledge and thus maintains its competitiveness. In knowledge building the organisation developsnew knowledge and thus improves its competitiveness.

RAPD analysis of genetic variability in a multiprovenance base population of Eucalyptus grandis hill ex maiden

This study aimed to evaluate the genetic variability among individuals of a base population of Eucalyptus grandis and to build a molecular marker database for the analyzed populations. The Eucalyptus grandis base population comprised 327 individuals from Coff's Harbour, Atherton and Rio Claro. A few plants came from other sites (Belthorpe MT. Pandanus, Kenilworth, Yabbra, etc.). Since this base population had a heterogeneous composition, the groups were divided according to geographic localization (latitude and longitude), and genetic breeding level. Thus, the influence of those two factors (geographic localization and genetic breeding level) on the genetic variability detected was discussed. The RAPD technique allowed the evaluation of 70 loci. The binary matrix was used to estimate the genetic similarity among individuals using Jaccard's Coefficient. Parametric statistical tests were used to compare within-group similarity of the means. The obtained results showed that the base population had wide genetic variability and a mean genetic similarity of 0.328. Sub-group 3 (wild materials from the Atherton region) showed mean genetic similarity of 0.318. S.P.A. (from Coff's Harbour region) had a mean genetic similarity of 0.322 and was found to be very important for maintenance of variation in the base population. This can be explained since the individuals from those groups accounted for most of the base population (48.3% for it). The base population plants with genetic similarity higher than 0.60 should be phenotypically analyzed again in order to clarify the tendency of genetic variability during breeding programs.

Kunnossapito-ohjelman rakentaminen RCM - menetelmän avulla

Työn tarkoituksena oli luoda UPM Kaukaan sellutehtaan kaustisointi- ja meesauunialueelle kunnossapito-ohjelma, RCM eli luotettavuuskeskeinen kunnossapitomenetelmää käyttäen. Tavoitteena oli luoda ennakkohuolto-ohjelma, joka pohjautuu laitekriittisyyksiin sekä optimoida kohdealueen laitteiden varaosien varastointia. Perustaksi työlle luotiin uusi kriittisyysluokittelumalli, joka perustuu PSK 6800 standardiin. Tarvittavien ennakkohuoltotoimenpiteiden määrittämisen apuna käytettiin toimenpiteiden määritysmatriisia. Varaosavaraston optimointia varten luotiin varaosien varastointitarpeen määritysmatriisi. Prosessin suorittamisessa korostui laaja ja osaava projektiryhmä, jonka avulla asioiden läpikäynnissä oli tarvittavat tiedot saatavilla. Projektiryhmässä oli mukana sekä kunnossapidon että käytön henkilöitä. Kunnossapito-ohjelmasta muodostui erittäin kattava. Seisokkia vaativat toimenpiteet ovat aikataulutettu siten, että niitä suoritetaan tasaisesti vuoden aikana. Uusien huoltorivien ansiosta alueen kunnossapito selkeytyy paljon.