Report of the Commissioner of the School Fund to the General Assembly.

Title varies slightly.

Reports of the missionary and benevolent boards and committees to the General Assembly ...

Report of each board has special t.-p. and paging.

2002 annual report to the General Assembly

This annual report from South Carolina First Steps Board of Trustees provides statistics on school readiness and early education and explains results of First Steps programs in health, early education, families, child care, accountability, and partnerships. The report also provides highlights of strategies by county.

A map of that part of Georgia occupied by the Cherokee Indians, taken from an actual survey made during the present year 1831, in pursuance of an act of the general assembly of the state : this interesting tract of country contains four millions three hundred & sixty six thousand five hundred & fifty four acres, many rich gold mines & many delightful situations & though in some parts mountainous, some of the richest land belonging to the state /

Relief shown by hachures.

Self-Assembly of Biopolymers on Colloidal Particles via Hydrogen Bonding

Fabrication of multilayer microcapsules via layer-by-layer approach through hydrogen bonding has attracted enormous interest due to its strong response to pH. In this communication, we have prepared hydrogen-bonded multilayer microcapsule without using any cross-linking agent by using DNA base pair (adenine and thymine) modified biocompatible polymers. The growth of the self-assembly on colloidal (melamine formaldehyde: MF) particles has been monitored with zeta potential measurement. The capsules were obtained on dissolution of MF particles at 0.1N HCl. The capsules were characterized with scanning electron microscopy. Moreover, we have observed the salt induced microscopic change in self-assembly of this system on the surface of colloidal particles.

Layer-by-Layer Assembly of Nafion on Surlyn with Ultrahigh Water Vapor Barrier

A layer-by-layer approach was used for the fabrication of multilayer films for ultra high gas barrier applications. The ultra high gas barrier material was designed by incorporating Nafion layer in between bilayers of poly(ethylene imine) and poly(acrylic acid) on a Surlyn substrate. When the barrier film with self-assembled Nafion is exposed to the moist environment, Nafion absorbs and desorbs water molecules simultaneously, thereby reducing the ingress of moisture in to the film. In order to study the effect of Nafion, the fabricated barrier materials with and without the presence of Nafion were tested for water vapor barrier properties. The barrier films were further used for encapsulating organic photovoltaic devices and were evaluated for their potential use in barrier applications. The devices encapsulated with the films containing Nafion exhibited better performance when subjected to accelerated aging conditions. Therefore, this study demonstrates the effectiveness of self-assembled Nafion in reducing the water vapor permeability by nearly five orders of magnitude and in increasing the lifetimes of organic devices by similar to 22 times under accelerated weathering conditions.

国际理论和应用力学联合会全代会(IUTAM General Assembly)会议简介

<正> 1国际理论和应用力学联合会全代会的介绍 国际理论和应用力学联合会(IUTAM)全代会(Gen-eral Assembly)是全世界力学界的最高组织IUTAM的最高权力机构.全代会按照IUTAM诸参加国的等级(分5等)来划分代表名额.只有美国、日本等国由于交纳最高等级的会费而拥有5个代表名额,而我国在代表大会中有4位代表(郑哲敏,何友声,白以龙和杨卫).此外,在决策IUTAM

Assembly of polyoxometalates on carbon nanotubes paste electrode and its catalytic behaviors

Carbon nanotubes paste (CNTP) electrode was prepared with multi-walled carbon nanotubes and methyl silicone oil. Polyoxometalates (POMs) were assembled on the electrode surface with different methods, and investigated by cyclic voltammetry and Raman spectroscopy. Experiments showed that POMs/CNTP electrode prepared by direct method had better performance. K6P2Mo18O62 center dot 14H(2)O (P2Mo18) assembled CNTP electrode (P2Mo18/CNTP) electrode possessed good reversibility and could catalyze the reduction of bromate and iodate in 0.1 M H2SO4 Solution. Further, the multilayer films of P2Mo18 assembled CNTP electrodes were fabricated by layer-by-layer technique, which showed higher electrocatalytic activities. All these POMs assembled CNTP electrodes prepared exhibited good stability.

Self-assembly morphology effects on the crystallization of semicrystalline block copolymer thin film

Self-assembly morphology effects on the crystalline behavior of asymmetric semicrystalline block copolymer polystyrene-block-poly(L-lactic acid) thin film were investigated. Firstly, a series of distinctive self-assembly aggregates, from spherical to ellipsoid and rhombic lamellar micelles (two different kinds of rhombic micelles, defined as rhomb 1 and rhomb 2) was prepared by means of promoting the solvent selectivity. Then, the effects of these self-assembly aggregates on crystallization at the early stage of film evolution were investigated by in situ hot stage atomic force microscopy. Heterogeneous nucleation initiated from the spherical micelles and dendrites with flat on crystals appeared with increasing temperature. At high temperature, protruding structures were observed due to the thickening of the flat-on crystals and finally more thermodynamically stable crystallization formed. Annealing the rhombic lamellar micelles resulted in different phenomena. Turtle-shell-like crystalline structure initiated from the periphery of the rhombic micelle 1 and spread over the whole film surface in the presence of mostly noncrystalline domain interior. Erosion and small hole appeared at the surface of the rhombic lamellar micelle 2; no crystallization like that in rhomb 1 occurred. It indicated that the chain-folding degree was different in these two micelles, which resulted in different annealing behaviors.

Impact of assembly process technologies on electronic packaging materials

Assembly processes used to bond components to printed circuit boards can have a significant impact on these boards and the final packaged component. Traditional approaches to bonding components to printed circuit boards results in heat being applied across the whole board assembly. This can lead to board warpage and possibly high residual stresses. Another approach discussed in this paper is to use Variable Frequency Microwave (VFM) heating to cure adhesives and underfills and bond components to printed circuit boards. In terms of energy considerations the use of VFM technology is much more cost effective compared to convection/radiation heating. This paper will discuss the impact of traditional reflow based processes on flexible substrates and it will demonstrate the possible advantages of using localised variable frequency microwave heating to cure materials in an electronic package.

The effect of manufacture and assembly joining methods on stiffened panel performance

This paper describes the simulation of representative aircraft wing stiffened panels under axial compression loading, to determine the effects of varying the manufacturing shape and assembly joining methods on stiffened panel performance. T-stiffened and Z-stiffened panels are modelled in Abaqus simulating integral, co-cured and mechanically fastened joints. The panels are subject to an edge compressive displacement along the stiffener axis until failure and the ultimate failure load and buckling performance is assessed for each. Integral panels consistently offer the highest performance. Co-cured panels demonstrate reduced performance (3-5% reduction in ultimate load relative to integral) caused by localised cohesive failure and skin-stiffener separation. The mechanically fastened panels are consistently the weakest joint (19-25% reduction in ultimate load relative to integral) caused primarily by inter-rivet buckling between fasteners

Proceedings of the General Assembly of South Carolina in the matter of the impeachment of Judge William Dobein James, November-December, 1827, and January, 1828

This document contains an account of the proceedings pertaining to the impeachment of Judge William Dobein James. The document contains the arguments for and against the impeachment as well as the voting tallies.

Annual message of his excellency Robert K. Scott, Governor of South Carolina, to the General Assembly, at the regular session, commencing November 28, 1871

This speech was delivered to by the Governor to give the general assembly information of the condition of the state and give them recommendations to consider measures that the Governor deems necessary or expedient. He provides the information regarding the state debt, taxes, and bonded debt. He describes the financial agent of the state as well as the expenditures of the state government.

Memo Re: The 70th General Assembly of O.I.V., 1990

A memo from Donald Ziraldo to the Board of Directors of the VQA and C.W.I. in regards to the 70th General Assembly of O.I.V. The memo is dated 24 September, 1990 and discusses conversations with the Director of O.I.V. and Canada (and Quebec's) possible membership. The memo also remarks "there was a noticeable absence of EEC delegates". One delegate was part of the O.I.V. Assembly and there were informal discussions with him in regards to Canada's request for recognition.