Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Banano ornamental: diversificación del uso de germoplasma para atender a nuevos mercados.

El mercado de plantas ornamentales tropicales ha mostrado un crecimiento expresivo y la búsqueda por novedades es constante. Actualmente hay pocas variedades de bananos ornamentales disponibles para comercialización, y en su mayoría constituyen el uso directo de especies de las secciones Rhodoclamys (M. ornata y M. velutina) y Callimusa (M. coccinea). La generación de nuevas variedades de banano ornamental para diferentes usos constituye una alternativa para satisfacer esta demanda. La Embrapa Yuca y Frutales mantiene un banco de germoplasma de Musa spp. con 290 accesiones, que contemplan variedades y especies silvestres de la sección Eumusa, con un predominio de M. acuminata y M. balbisiana, con diferentes grados de ploidia y combinaciones de los genomas A y B. La colección también alberga representantes de las secciones Rhodochlamys y Callimusa. Tradicionalmente el uso de este germoplasma estaba direccionado sólo a la producción de cultivares para la alimentación, y ha generado varios cultivares productivos, con frutos de buena calidad y resistentes al mal de Panamá, Sigatoka amarilla y Sigatoka negra.

Cuaderno de diseño. Informe de resultados obtenidos en taller de creatividad.

79 hojas : ilustraciones,tablas, cuadros.

Cuaderno de diseño : informe de resultados obtenidos en taller de creatividad.

79 hojas : ilustraciones, tablas, cuadros.

Cuaderno de diseño. Informe de resultados obtenidos en taller de creatividad.

79 hojas : ilustraciones, tablas, cuadros.

Indice predictivo de enfermedades peripartales (IPEP)

Los tambos son sistemas productivos muy complejos que dependen básicamente de cuatro pilares considerados como variables: el ambiente, los animales, la alimentación y los operarios. Comederos sin mantenimiento, con barro y estiércol, animales con pobre estado corporal, dietas no balanceadas o deficientes en nutrientes, predisponen a trastornos metabólicos. Personal sin capacitación y/o motivación, no realizará bien las múltiples tareas del tambo. Las vacas lecheras antes y después del parto tienen enormes cambios metabólicos y hormonales y esto es un factor que predispone a las enfermedades peripartales (IP) como: distocias, retención de placenta, edema de ubre, metritis, mastitis, cetosis, acidosis, desplazamiento de abomaso, timpanismo, hipocalcemia puerperal, lesiones podales, etc. ¿Como evaluar las variables?¿que miramos o qué metodología seguimos a campo? Para ello se propone el Índice Predictivo de Enfermedades Peripartales (IPEP). El IPEP es una guía que permite realizar un relevamiento ordenado y sistemático de los indicadores relacionados con las enfermedades peripartales sobre las variables del ambiente, los animales, la alimentación y los operarios. Es una herramienta metodológica que permite generar un diagnóstico a campo de las causas y factores predisponentes de las EP en establecimientos lecheros. A cada indicador se le asigna un número en una escala de 1 a 5, donde 1 es malo/pésimo; 2 es regular; 3 es bueno; 4 muy bueno y 5 es óptimo/excelente y los promedios de las variables da un IPEP final. El IPEP se aplicó en un tambo comercial, localizado en Brinkmann-Córdoba de 270 has, 210 vacas y 4200 litros de leche diarios. Se realizaron 4 visitas, se llenaron las planillas de indicadores del IPEP. Se observó el preparto, el rodeo en producción, las pasturas, las instalaciones y se habló con el personal. Se detectaron áreas en conflicto: dieta no balanceada, deficiente suplementación mineral, animales con pelaje seco, accesos en malas condiciones y la falta de una pileta pediluvio. En la primer visita abril de 2008 se realizó el IPEP y dio un valor de 3,11 , superior a 3 lo cual admite la calificación como tambo bueno. De acuerdo a la incidencia de EP y mortandad las pérdidas económicas para dicho IPEP fue de U$S 11.415, que equivalen al 7,3 por ciento de los ingresos por leche. Se propusieron correcciones y mejoró el índice, en septiembre del 2009, dio como resultado un IPEP de 3,71 y las perdidas económicas por EP y mortandad se estimaron en U$S 8.064, equivalentes al 0,43 de los ingresos por leche.

Cuestiones de escala en el ámbito de la “Huella Hídrica”.

La aplicación de la “Huella Hídrica” a la realidad española debe hacerse desde la consciencia de que hasta hace relativamente poco, el pensamiento científico dominante era el reduccionismo, cuyo enfoque considera que basta un conocimiento detallado de cada uno de los componentes de un sistema y de sus leyes fundamentales, para entenderlo globalmente. Y es que, el interés por este indicador surge de la importancia que cobran conceptos como “escasez” y “contaminación” del agua, como consecuencia directa e indirecta de la actividad humana sobre los sistemas hídricos, tanto en España como en los países de América Latina; con el fin de mejorar la gestión –desde la oferta y la demanda- de los recursos hídricos del planeta y reducir las desigualdades territoriales. De este modo, en el presente estudio se realiza una estimación de la “Huella Hídrica” de España y América Latina, así como de a la Red de Parques Nacionales Españoles, tanto a nivel económico como ambiental, describiendo los recursos hídricos utilizados, necesarios para satisfacer la demanda de bienes y servicios consumidos, en los prolegómenos del siglo XXI.

La aplicación estratégica por escenarios en el medio natural. El caso del Nature Outlook 2050 del PBL.

La prospectiva es parte de la planificación estratégica. Es una herramienta habitual en la gestión y dirección de empresas. Algunos países europeos la incluyen dentro de sus trabajos de diseño de las políticas ambientales. La generación de escenarios es una técnica cualitativa de prospectiva apta para los entornos con alta variabilidad y complejidad. El artículo explica el modo de aplicar esta técnica poniendo en paralelo los pasos dados en el proyecto Nature Outlook 2050 que ha desarrollado la agencia de evaluación y prospectiva ambiental de los Países Bajos (PBL).

The sector of olive-oil cooperatives and the use of ICT: A comparative study regarding othe legal forms

The current global environment and the general increase in the spread and use of Information Technology and Communication (ICT) by companies and consumers, make the use of these technologies as essential to confront the growing competition in the market. Focused on this sector, in this research we analyze the use of electronic commerce, as through websites as through electronic markets, and the use of social networking tools as enablers of business. For this aim, we conducted a comparative analysis between the Andalusian olive oil cooperatives and other legal forms which are present in the sector.

Factores determinantes del uso de Internet en la comercialización del aceite de oliva. Análisis del sector en Cataluña

Las cooperativas son entidades con una gran presencia económica y social en España, y tienen una gran influencia en la economía rural de las zonas donde están ubicadas. El principal objetivo del presente trabajo es el análisis del uso de las nuevas tecnologías por parte de las cooperativas agroalimentarias, centrándose en las productoras de aceite de oliva para determinar los principales factores que condicionan su comportamiento en la Red. En el presente estudio se analizan sus sitios web y se determina qué tipo de información aporta, tanto datos generales como datos de comercialización. A partir de los resultados obtenidos, se busca la relación que pueda existir entre el tamaño de la cooperativa, su actividad exportadora o la actividad de comercio electrónico con la presencia online, mediante una regresión logística. De esta manera podremos conocer si realmente la implantación de nuevas tecnologías en las cooperativas permite desarrollar una óptima actividad económica.

Efecto de la administración de naloxona sobre la secreción de hormona luteinizante en vacas lecheras en período temprano postparto

Tesis (Maestría en Ciencias en Producción Animal) UANL

El Tropel, un sitio arqueológico del Clásico en el Occidente Mesoamericano.

Cette recherche doctorale a été réalisée dans le cadre d’un projet de sauvetage archéologique à Villa de Álvarez, dans l’état de Colima (Mexique). Dans la zone géographique à l’étude, plusieurs traces indiquant la présence de contextes funéraires ont été relevées par le passé, mais aucun de ces sites n’a fait l’objet d’un rapport archéologique. L’état de Colima est connu pour ses tombes à puits (tumbas de tiro), ses céramiques de manufacture typique, ainsi que pour les fameux « chiens de Colima ». Malgré la relation entre ces objets et les contextes funéraires, peu d’études se sont attardées à comprendre la composante biologique de ces contextes, c’est-à-dire les êtres humains. Ainsi, la richesse du projet de sauvetage archéologique nous a donné l’opportunité de structurer un projet de recherche de thèse doctorale beaucoup plus profond en ce qui concerne un des sujets les plus importants de cette région mésoaméricaine : les traditions funéraires. C’est de cette façon, à la lumière des résultats particuliers obtenus sur le site du Tropel, que nous avons décidé de travailler les liens culturels existants entre ce dernier, la région de Colima, l’Ouest mésoaméricain et l’aire culturelle dans son ensemble. La campagne de fouille ainsi menée a permis la récupération de vingt-six individus de différents sexes et âges. Au moins quatre périodes d’occupation ont été enregistrées sur le site. La présence humaine sur le site s’étend donc de 339AD à 682 AD (datations au radiocarbone sur trois individus du site El Tropel), ce qui correspond à la phase archéologique Comala à Colima. L’abondance d’artefacts de cette phase dans les quatre strates culturelles du site a permis de réaliser une datation relative en relation avec l’apparition et la fréquence de céramiques d’autres phases culturelles connues : Ortices, Colima, Armería y Chanal. Concernant les pratiques funéraires, la fouille a permis de constater le traitement des cadavres avant, pendant et après l’enterrement des défunts. Bien que des contextes funéraires similaires aient déjà été mentionnés dans la région, aucun d’entre eux n’a pu être identifié clairement. Ces traitements funéraires démontrent l’existence chez les anciens habitants de Colima d’une transmission des connaissances concernant l’anatomie, les processus de décomposition des cadavres, et même possiblement d’un culte des os humains. Une étude ostéologique a été menée sur les squelettes afin de documenter les aspects démographiques, pathologiques, sociaux et économiques de la population du site. Parmi les éléments les plus significatifs de l’étude, il est possible de mentionner la présence de certaines pathologies peu connues dans cette région de la Mésoamérique telles que la syphilis et la tuberculose. Des déformations crâniennes ont aussi été observées, ainsi que la présence d’un déformateur crânien en céramique. De plus, de nombreuses données ont été relevées concernant la présence d’os wormiens sur les crânes déformés artificiellement. Finalement, des analyses d’isotopes stables ont été pratiquées sur des os des individus, ainsi que sur des os de chiens et de cerfs retrouvés sur le site, afin de mieux connaître l’alimentation et la vie des communautés anciennes de la région.

El huerto escolar ecológico en el CP Valero Serrano.

Seleccionado en la convocatoria: Ayudas a la innovación e investigación educativa en centros docentes de niveles no universitarios, Gobierno de Aragón 2008-2009

El caballo : instrumento para una educación inclusiva.

Se incluye un tríptico con fichas didácticas y diversa información relacionada con el caballo. Seleccionado en la convocatoria: Ayudas para proyectos de temática educativa, Gobierno de Aragón 2009-10

Los almuerzos saludables.

Continuación del proyecto del CP Santa Engracia para la adquisición de hábitos alimentarios saludables. Sus objetivos son: los relacionados con la alimentación y la obtención de una dieta sana y los relacionados con contenidos curriculares para trabajar las competencias básicas. La metodología se basa en la participación del alumno en su propio aprendizaje y desarrollo. Se realizan diferentes actividades: con los alumnos, talleres de sabores, olores, texturas y de mezclas y con las familias, talleres y charlas con expertos en alimentación. Se organiza la semana del almuerzo saludable, donde los alumnos tienen que diseñar su propia alimentación basada en unos principios y sujeta a unos presupuestos. También se realizan talleres de cocina donde las familias enseñan a recetas a los alumnos. La metodología gira en torno a la participación del alumno en su propio aprendizaje y en su desarrolloaSeleccionado en la convocatoria: Ayudas a la innovación e investigación educativa en centros docentes de niveles no universitarios, Gobierno de Aragón 2009-10.