Highly sensitive refractive index sensor based on cascaded microfiber knots with Vernier effect

We propose and experimentally demonstrate a refractive index (RI) sensor based on cascaded microfiber knot resonators (CMKRs) with Vernier effect. Deriving from high proportional evanescent field of microfiber and spectrum magnification function of Vernier effect, the RI sensor shows high sensitivity as well as high detection resolution. By using the method named "Drawing-Knotting-Assembling (DKA)", a compact CMKRs is fabricated for experimental demonstration. With the assistance of Lorentz fitting algorithm on the transmission spectrum, sensitivity of 6523nm/RIU and detection resolution up to 1.533 x 10-7 RIU are obtained in the experiment which show good agreement with the numerical simulation. The proposed all-fiber RI sensor with high sensitivity, compact size and low cost can be widely used for chemical and biological detection, as well as the electronic/magnetic field measurement

Design, fabrication and characterization of resonant waveguide grating based optical biosensors

The absence of rapid, low cost and highly sensitive biodetection platform has hindered the implementation of next generation cheap and early stage clinical or home based point-of-care diagnostics. Label-free optical biosensing with high sensitivity, throughput, compactness, and low cost, plays an important role to resolve these diagnostic challenges and pushes the detection limit down to single molecule. Optical nanostructures, specifically the resonant waveguide grating (RWG) and nano-ribbon cavity based biodetection are promising in this context. The main element of this dissertation is design, fabrication and characterization of RWG sensors for different spectral regions (e.g. visible, near infrared) for use in label-free optical biosensing and also to explore different RWG parameters to maximize sensitivity and increase detection accuracy. Design and fabrication of the waveguide embedded resonant nano-cavity are also studied. Multi-parametric analyses were done using customized optical simulator to understand the operational principle of these sensors and more important the relationship between the physical design parameters and sensor sensitivities. Silicon nitride (SixNy) is a useful waveguide material because of its wide transparency across the whole infrared, visible and part of UV spectrum, and comparatively higher refractive index than glass substrate. SixNy based RWGs on glass substrate are designed and fabricated applying both electron beam lithography and low cost nano-imprint lithography techniques. A Chromium hard mask aided nano-fabrication technique is developed for making very high aspect ratio optical nano-structure on glass substrate. An aspect ratio of 10 for very narrow (~60 nm wide) grating lines is achieved which is the highest presented so far. The fabricated RWG sensors are characterized for both bulk (183.3 nm/RIU) and surface sensitivity (0.21nm/nm-layer), and then used for successful detection of Immunoglobulin-G (IgG) antibodies and antigen (~1μg/ml) both in buffer and serum. Widely used optical biosensors like surface plasmon resonance and optical microcavities are limited in the separation of bulk response from the surface binding events which is crucial for ultralow biosensing application with thermal or other perturbations. A RWG based dual resonance approach is proposed and verified by controlled experiments for separating the response of bulk and surface sensitivity. The dual resonance approach gives sensitivity ratio of 9.4 whereas the competitive polarization based approach can offer only 2.5. The improved performance of the dual resonance approach would help reducing probability of false reading in precise bio-assay experiments where thermal variations are probable like portable diagnostics.

Travel, back and forth, to the myth. Cinema´s contribution to the formation of the tourist iconography of Mallorca

Mallorca, the largest of the Balearic Islands, is a well-known summer holidays destination; an ideal place to relax and enjoy the sun and the sea. That tourist gaze reflected on postcards results from advertising campaigns, where cinema played an important role with documentaries and fiction films. The origins of that iconography started in the decades of the 1920’s and 1930’s, reflecting the so-called myth of the “island of calm”. On the other hand, the films of the 1950’s and 1960’s created new stereotypes related to the mass tourism boom. Busy beaches and the white bodies of tourists replaced white sandy beaches, mountains and landscapes shown up in the movies of the early decades of the 20th century. Besides, hotels and nightclubs also replaced monuments, rural landscapes and folk exhibitions. These tourist images mirror the social and spatial transformations of Mallorca, under standardization processes like other seaside mass tourist destinations. The identity was rebuilt on the foundations of "modernity". Although "balearization" has not ceased, nowadays filmmaking about Mallorca is advertising again a stereotype close to that one of the 1920s and 1930s, glorifying the myth of the "island of calm". This singular identity makes the island more profitable for capital that searches socio-spatial differentiation in post-fordist times.

Adaptación del sector turístico al cambio climático en España. La importancia de las acciones a escala local y en empresas turísticas

El 5º Informe del IPCC (Panel Intergubernamental de Cambio Climático, 2014) señala que el turismo será una de las actividades económicas que mayores efectos negativos experimentará en las próximas décadas debido al calentamiento térmico del planeta. En España, el turismo es una fuente principal de ingresos y de creación de puestos de trabajo en su economía. De ahí que sea necesaria la puesta en marcha de medidas de adaptación a la nueva realidad climática que, en nuestro país, va a suponer cambios en el confort climático de los destinos e incremento de extremos atmosféricos. Frente a los planes de adaptación al cambio climático en la actividad turística, elaborados por los gobiernos estatal y regional, que apenas se han desarrollado en España, la escala local muestra interesantes ejemplos de acciones de adaptación al cambio climático, desarrolladas tanto por los municipios (energía, transporte, vivienda, planificación urbanística) como por la propia empresa turística (hoteles, campings, apartamentos). Medidas de ahorro de agua y luz, fomento del transporte público y de las energías limpias, creación de zonas verdes urbanas y adaptación a los extremos atmosféricos destacan como acciones de mitigación del cambio climático en los destinos turísticos principales de nuestro país.

"Lancea", Lusitanian Word, and the "Lancienses" Ethnogenesis

Analysis of the word lancea, of Hispanic origin after Varro, and of place names, people´s names and personal names derived from it. It confirms that the spear was the most important weapon in the Bronze Age, belonging to the iuventus and used as heroic and divine symbol. This analysis confirms also the personality of the Lusitanians, a people related to the Celts but with more archaic archaeological, linguistic and cultural characteristics originated in the tradition of the Atlantic Bronze in the II millennium BC. It is also relevant to better know the organisation of Broze and Iron Age societies and the origin of Indo-Europeans peoples in Western Europe and of pre-Roman peoples of Iberia.

Los debates en torno al ferrocarril en España anteriores a la creación de RENFE: el camino hacia el monopolio de Estado

Desde su nacimiento hasta la caída de la dictadura de Primo de Rivera, el ferrocarril se perfiló como una industria doblemente creadora de riqueza, estimulando por un lado la ya existente e impulsando el desarrollo económico por otro. Ante sus peculiaridades técnicas, económicas y de mercado, los distintos gobiernos adoptaron soluciones intervencionistas de mayor o menor grado. Simultáneamente, en su primer desarrollo, se produjo el abandono del paradigma clásico basado en la libre competencia, lo que derivó en la conversión del ferrocarril en foco de la retórica anti-competencia y de la práctica intervencionista. En este trabajo realizamos un seguimiento del nacimiento y desarrollo del ferrocarril, centrado exclusivamente en la evolución político-económica del sector dentro de la propia evolución histórica, paralela a la vía nacionalista del capitalismo español, y en la descriptiva teórica y práctica del desarrollo del intervencionismo y las restricciones al libre mercado.

Desire and Divorce in Serglige Con Culainn

This paper examines the expression of ideas about love, marriage and divorce in Serglige Con Culainn. It is argued that the two versions of the tale, both of which are incomplete, exhibit distinctive approaches to love and the portrayal of the female characters. The earlier recension depicts male desire as a violent attack by Otherworld women that renders the man incapacitated. The later version provides a radically different view, offering a strikingly sympathetic portrait of the two female protagonists which may suggest a female audience. This version gives a remarkable insight into sexual mores and marital breakdown in a protracted and detailed negotiation involving the three main characters. It reveals tensions between male and female views of marriage and particularly of the practice of concubinage. It values loyalty between married partners over the fulfilment of desire and demonstrates the enduring and destructive effects of passion which are healed here only through magical interventions.

Conception, fabrication et caractérisation d'un biocapteur SPR à base de guides d'ondes photoniques sur substrat de verre

Résumé : Malgré le nombre croissant de capteurs dans les domaines de la chimie et la biologie, il reste encore à étudier en profondeur la complexité des interactions entre les différentes molécules présentes lors d’une détection à l’interface solide-liquide. Dans ce cadre, il est de tout intérêt de croiser différentes méthodes de détection afin d’obtenir des informations complémentaires. Le principal objectif de cette étude est de dimensionner, fabriquer et caractériser un détecteur optique intégré sur verre basé sur la résonance plasmonique de surface, destiné à terme à être combiné avec d’autres techniques de détection, dont un microcalorimètre. La résonance plasmonique de surface est une technique reconnue pour sa sensibilité adaptée à la détection de surface, qui a l’avantage d’être sans marquage et permet de fournir un suivi en temps réel de la cinétique d’une réaction. L’avantage principal de ce capteur est qu’il a été dimensionné pour une large gamme d’indice de réfraction de l’analyte, allant de 1,33 à 1,48. Ces valeurs correspondent à la plupart des entités biologiques associées à leurs couches d’accroche dont les matrices de polymères, présentés dans ce travail. Étant donné que beaucoup d’études biologiques nécessitent la comparaison de la mesure à une référence ou à une autre mesure, le second objectif du projet est d’étudier le potentiel du système SPR intégré sur verre pour la détection multi-analyte. Les trois premiers chapitres se concentrent sur l’objectif principal du projet. Le dimensionnement du dispositif est ainsi présenté, basé sur deux modélisations différentes, associées à plusieurs outils de calcul analytique et numérique. La première modélisation, basée sur l’approximation des interactions faibles, permet d’obtenir la plupart des informations nécessaires au dimensionnement du dispositif. La seconde modélisation, sans approximation, permet de valider le premier modèle approché et de compléter et affiner le dimensionnement. Le procédé de fabrication de la puce optique sur verre est ensuite décrit, ainsi que les instruments et protocoles de caractérisation. Un dispositif est obtenu présentant des sensibilités volumiques entre 1000 nm/RIU et 6000 nm/RIU suivant l’indice de réfraction de l’analyte. L’intégration 3D du guide grâce à son enterrage sélectif dans le verre confère au dispositif une grande compacité, le rendant adapté à la cointégration avec un microcalorimètre en particulier. Le dernier chapitre de la thèse présente l’étude de plusieurs techniques de multiplexage spectral adaptées à un système SPR intégré, exploitant en particulier la technologie sur verre. L’objectif est de fournir au moins deux détections simultanées. Dans ce cadre, plusieurs solutions sont proposées et les dispositifs associés sont dimensionnés, fabriqués et testés.

Alternativa ecológica en la evaluación del salto de longitud de atletas paralímpicos

Los Juegos Paralímpicos constituyen el máximo exponente a nivel mundial del deporte de competición practicado por personas con discapacidad. En este trabajo exponemos la investigación realizada en los Juegos Paralímpicos de Londres 2012, analizando las acciones de los atletas ciegos en el salto de longitud. Para la toma de datos se utilizaron 4 cámaras Exilim F1 (Casio, Japan), grabando 2 en alta velocidad (512x384 píxeles a 300 Hz) y 2 en alta definicón (1280x720 pixeles a 30 Hz), permitiendo no interferir en la competición. El tratamiento y extracción de datos cinemáticos de las imágenes se realizó con el programa Kinovea 0.8.15 (disponible en http://kinovea.org). Las variables analizadas en el último paso de la carrera de aproximación fueron: velocidad de paso, Vp (m/s); velocidad resultante, Vr (m/s); frecuencia de paso, Fp (Hz); longitud de paso, Lp (m); tiempo de contacto, Tc (s); tiempo de vuelo, Tv (s), tiempo de paso, Tp; altura del centro de masas, BCM h1(m); ángulo de batida, a1(º); y la duración de la batida, Tc0 (s). Se ha observado una influencia positiva en las variables Tc1, Tv1 y Vp1 y negativas en a1, Lp1, Tp1 y Tc0. Los resultados obtenidos han permitido identificar las variables determinantes del rendimiento en salto de longitud de atletas ciegos y comparar éstas con los ya existentes de deportistas sin discapacidad y de similar habilidad técnica. La metodología utilizada se ha mostrado fiable, válida y precisa, siendo de gran utilidad en los ámbitos competitivos por no interferir en el espacio deportivo.

Mid-infrared photonic sensors based on metamaterial structures

In this work three different metallic metamaterials (MMs) structures such as asymmetric split ring resonators (A-SRRs), dipole and split H-shaped (ASHs) structures that support plasmonic resonances have been developed. The aim of the work involves the optimization of photonic sensor based on plasmonic resonances and surface enhanced infrared absorption (SEIRA) from the MM structures. The MMs structures were designed to tune their plasmonic resonance peaks in the mid-infrared region. The plasmonic resonance peaks produced are highly dependent on the structural dimension and polarisation of the electromagnetic (EM) source. The ASH structure particularly has the ability to produce the plasmonic resonance peak with dual polarisation of the EM source. The double resonance peaks produced due to the asymmetric nature of the structures were optimized by varying the fundamental parameters of the design. These peaks occur due to hybridization of the individual elements of the MMs structure. The presence of a dip known as a trapped mode in between the double plasmonic peaks helps to narrow the resonances. A periodicity greater than twice the length and diameter of the metallic structure was applied to produce narrow resonances for the designed MMs. A nanoscale gap in each structure that broadens the trapped mode to narrow the plasmonic resonances was also used. A thickness of 100 nm gold was used to experimentally produce a high quality factor of 18 in the mid-infrared region. The optimised plasmonic resonance peaks was used for detection of an analyte, 17β-estradiol. 17β-estradiol is mostly responsible for the development of human sex organs and can be found naturally in the environment through human excreta. SEIRA was the method applied to the analysis of the analyte. The work is important in the monitoring of human biology and in water treatment. Applying this method to the developed nano-engineered structures, enhancement factors of 10^5 and a sensitivity of 2791 nm/RIU was obtained. With this high sensitivity a figure of merit (FOM) of 9 was also achieved from the sensors. The experiments were verified using numerical simulations where the vibrational resonances of the C-H stretch from 17β-estradiol were modelled. Lastly, A-SRRs and ASH on waveguides were also designed and evaluated. These patterns are to be use as basis for future work.

High-sensitivity refractive index sensor based on large-angle tilted fiber grating with carbon nanotube deposition

This paper presents a highly sensitive ambient refractive index (RI) sensor based on 81° tilted fiber grating (81°-TFG) structure UV-inscribed in standard telecom fiber (62.5μm cladding radius) with carbon nanotube (CNT) overlay deposition. The sensing mechanism is based on the ability of CNT to induce change in transmitted optical power and the high sensitivity of 81°-TFG to ambient refractive index. The thin CNT film with high refractive index enhances the cladding modes of the TFG, resulting in the significant interaction between the propagating light and the surrounding medium. Consequently, the surrounding RI change will induce not only the resonant wavelength shift but also the power intensity change of the attenuation band in the transmission spectrum. Result shows that the change in transmitted optical power produces a corresponding linear reduction in intensity with increment in RI values. The sample shows high sensitivities of ∼207.38nm/RIU, ∼241.79nm/RIU at RI range 1.344-1.374 and ∼113.09nm/RIU, ∼144.40nm/RIU at RI range 1.374-1.392 (for X-pol and Y-pol respectively). It also shows power intensity sensitivity of ∼ 65.728dBm/RIU and ∼ 45.898 (for X-pol and Y-pol respectively). The low thermal sensitivity property of the 81°-TFG offers reduction in thermal cross-sensitivity and enhances specificity of the sensor.