Caracterización y evaluación preliminar de catorce accesiones de chile (Capsicum spp.)

La presente investigación se llevó a cabo en el Programa de Recursos Genéticos Nicaraguenses (REGEN) de la Universidad Nacional Agraria, durante el período Octubre 2002-Abril-2003, teniendo como principal objetivo contribuir al desarrollo y mejoramiento de la actividad productiva en el cultivo del chile (Capsicum spp.) en Nicaragua. El material genético estuvo formado por genotipos procedentes de México (Chile Ancho, Catarina, Serrano, Mirasol, Arbol, Puya, Guajillo y Cascabel), de Nicaragua (Pico de pájaro, Diente de perro y Jalapeño), de Perú (Alfilerillo y Bacatum) y Pakistán (Canica). Se construyó una base de datos con 44 descriptores cualitativos y cuantitativos de 14 genotipos. Como base se empleó la guía de descriptores propuesta por el IBPGR (1983). Las parcelas experimentales estuvieron constituidas por nueve plantas con dos réplicas de las cuales se tomaron dos plantas por parcela para la recolección de los datos. Fueron empleadas herramientas estadísticas univariadas y multivariadas. El ANDEVA y Tukey (∞=0.05) aplicados a los descriptores cuantitativos demostró una alta significancia estadística estableciéndose clara diferencia entre los genotipos; las accesiones Bacatum, Diente de perro, Pico de pájaro, Alfilerillo y Ancho manifestaron una amplia variación. El análisis de componentes principales determinó que los descriptores de fruto, semillas y flor contribuyeron a que los tres primeros componentes principales aislaran el 68.09 % de la variación general conformada por 28 variables. De igual manera, el análisis de conglomerados (Ward, coeficiente R2 semiparcial) fijó cuatro grupos a una distancia de 0.125, este análisis aglutina a los cultivares de la siguiente forma: Primer grupo (Bacatum), segundo grupo (Diente de perro y Pico de pájaro), y el tercer grupo (Guajillo, Mirasol, Cascabel, Chile Ancho y Jalapeño) y el cuarto grupo (Alfilerillo, Catarina, Serrano, Canica, Arbol y Puya). Los cultivares evaluados presentan características morfológicas de C. annum, C. frutescens y C. baccatum. Con respecto a la caracterización del germoplasma a enfermedades se observó una alta incidencia de infección viral. La mayoría de los genotipos mostraron altos niveles de severidad; sin embargo los materiales Alfilerillo, Canica y Diente de perro mostraron valores de severidad menores del 20%. Respecto al ataque de picudo se pudo observar que Puya, Pico de pájaro y Diente de perro mostraron un nivel de daño severo mientras que los genotipos Cascabel,Jalapeño, Guajillo, Alfilerillo yChile Ancho no mostraron daño.

The interaction between poly(vinylpyrrolidone) and reversed micelles of water/AOT/n-heptane

The interactions between poly(vinylpyrrolidone) (PVP) and the reversed micelles composed of water, AOT, and n-heptane are investigated with the aid of phase diagram, measurements of conductivity and viscosity, Fourier transform infrared (FTIR) spectrum, and dynamic light scattering (DLS). The phase diagrams of water/AOT/heptane in the presence of and absence of PVP are given. The conductivity of the water/AOT/heptane reversed micelle without PVP initially increases and then decreases with the increase of water content, ω0 (the molar ratio of water to AOT), while the plots of conductivity (K) versus ω0 of the reversed micelle in the presence of PVP depend on the PVP concentrations. The plot of K versus ω0 with 2.0%wt PVP is similar to that without PVP. Only the ω0,max (the water content that the maximum conductivity corresponds to) is larger than that without PVP. Nevertheless, the conductivity of the reversed micelle containing more than 4%wt PVP always rises with the increase of the water content in the measured range. The DLS results indicate that the hydrodynamic radius (Rh) in the presence and absence of PVP rises with the increase of ω0. The plots with PVP and without PVP have almost the same value when ω0<17; and after that, it quickly increases with the increase of ω0. It is interesting to find that there is almost no effect of the PVP concentration on the viscosity and Rh of the reversed micelle at ω0 = 15. The FTIR results suggest that the contents of SO3--bound water and Na+-bound water both decrease with PVP added, while the content of the bulky-like water increases. However, the trapped water in the hydrophobic chain of the surfactant is nearly unaffected by PVP. It is also found from the FTIR that the carbonyl group stretching vibration of AOT is fitted into two sub-peaks, which center at 1740 and 1729 cm-1, corresponding to the trans and cis conformations of AOT, respectively.

Incidencia de mosca blanca (Bemisia tabaci Genn) y Picudo (Anthonomus eugenii cano) en cinco genotipos de chile (Capsicum ssp)

Este trabajo se realizó en el período comprendido entre noviembre 2003 y abril 2004, en el área experimental del programa de Recursos Genéticos Nicaragüenses(REGEN), de la Universidad Nacional Agraria, ubicado en el km 12 ½ Carretera Norte con el objetivo de evaluar cinco genotipos de chile (Capsicum ssp.), a la infestación natural de las principales plagas. Los genotipos evaluados fueron CANICA1, CANICA2, ALFILERILLO, DIENTE PERRO Y MIRASOL; se utilizó un diseño de Bloques Completos al Azar (BCA). Las variables evaluadas fueron: incidencia de mosca blanca, incidencia y severidad de virosis, incidencia de picudo,número de frutos por planta, número de frutos anormales y rendimiento (kg ha-1).Para identificar características entre los genotipos, se realizó análisis de varianza y separación de medias (Tukey α=0.05). Los resultados indicaron que para todas las variables evaluadas existen diferencias significativas. El mayor promedio de mosca blanca la obtuvo el genotipo CANICA2 y el menor el genotipo MIRASOL. En cuanto a la incidencia de virosis el menor valor lo presentó CANICA1 y el mayor DIENTE PERRO. El genotipo con mayor severidad por infección viral fue MIRASOL y el menor valor promedio en CANICA1. Para la variable número de frutos por planta, los genotipos MIRASOL y ALFILERILLO promediaron los menores y mayores valores promedio, respectivamente. En cuanto a frutos deformes el menor promedio lo obtuvo CANICA1 y el mayor DIENTE PERRO. Los mayores rendimientos fueron alcanzados por los genotipos DIENTE PERRO (944.4 kg ha-1) y CANICA2 (941 kg ha-1) y el menor valor al genotipo ALFILERILLO con un rendimiento de 368.8 kg ha-1.

Preparation And Optical Properties Of Cdte/Cdo Center Dot Nh(2)O Core/Shell Nano-Composites In Aqueous Solution

The deposition of CdO center dot nH(2)O On CdTe nanoparticles was studied in an aqueous phase. The CdTe nanocrystals (NCs) were prepared in aqueous solution through the reaction between Cd2+ and NaHTe in the presence of thioglycolic acid as a stabilizer. The molar ratio of the Cd2+ to Te2- in the precursory solution played an important role in the photoluminescence of the ultimate CdTe NCs. The strongest photoluminescence was obtained under 4.0 of [Cd2+]/[Te2-] at pH similar to 8.2. With the optimum dosage of Cd(II) hydrous oxide deposited on the CdTe NCs, the photoluminescence was enhanced greatly. The photoluminescence of these nanocomposites was kept constant in the pH range of 8.0-10.0, but dramatically decreased with an obvious blue-shifted peak while the pH was below 8.0. In addition, the photochemical oxidation of CdTe NCs with cadmium hydrous oxide deposition was markedly inhibited.

Thickness And Component Distributions Of Yttrium-Titanium Alloy Films In Electron-Beam Physical Vapor Deposition

Thickness and component distributions of large-area thin films are an issue of international concern in the field of material processing. The present work employs experiments and direct simulation Monte Carlo (DSMC) method to investigate three-dimensional low-density, non-equilibrium jets of yttrium and titanium vapor atoms in an electron-beams physical vapor deposition (EBPVD) system furnished with two or three electron-beams, and obtains their deposition thickness and component distributions onto 4-inch and 6-inch mono-crystal silicon wafers. The DSMC results are found in excellent agreement with our measurements, such as evaporation rates of yttrium and titanium measured in-situ by quartz crystal resonators, deposited film thickness distribution measured by Rutherford backscattering spectrometer (RBS) and surface profilometer and deposited film molar ratio distribution measured by RBS and inductively coupled plasma atomic emission spectrometer (ICP-AES). This can be taken as an indication that a combination of DSMC method with elaborate measurements may be satisfactory for predicting and designing accurately the transport process of EBPVD at the atomic level.

Caracterización y evaluación preliminar de 14 accesiones de Chile (Capsicum spp)

La presente investigación se llevó a cabo en el Programa de Recursos Genéticos Nicaragüenses (REGEN) de la Universidad Nacional Agraria, durante el período Octubre 2002-Abril-2003. El objetivo fue estudiar y evaluar gennoplasma nativo e introducido de chile {Capsicum spp.) en condiciones del trópico seco de Nicaragua. La caracterización de las 14 accesiones en base a la guía de descriptores propuesta por IBPGR (lt¡83) y mediante el análisis estadístico univariado y multivariados permitió identificar los principales descriptores cualitatí vos ( fonna del fruto, pungencía y forma del fruto en la unión con el pedúnculo) y cuantitativos (diámetro de semillas, diámetro del fruto y peso del fruto) que son de gran utilidad para el estudio de la variación genética de chile. Además se logró conformar un catálogo con las características de cada uno de los material.es. Las accesiones de mayor variación fueron Bacatum, Diente de perro, Pico de pájaro, Alfilerillo y Chile ancho. El resto de materiales tienen características más uniformes. Las accesiones evaluadas presentaron características morfológicas propias de las especies C. annuum, C. frutescens y C. baccatum. En el germopla.sma de Capsicum evaluado se encontraron materiales que poseen diferente reacción a plagas y enfermedades. Palabras claves: Capsicum; accesión; germoplasma; descriptor.

On mechanical properties of metallic glass and its liquid vitrification characteristics

A systematic survey of the available data such as elastic constants, density, molar mass, and glass transition temperature of 45 metallic glasses is conducted. It is found that a critical strain controlling the onset of plastic deformation is material-independent. However, the correlation between elastic constants of solid glass and vitrification characteristics of its liquid does not follow a simple linear relation, and a characteristic volume, viz. molar volume, maybe relating to the characteristic size of a shear transformation zone (STZ), should be involved.

Preparation and optical properties of CdTe/CdO center dot nH(2)O core/shell nano-composites in aqueous solution

The deposition of CdO center dot nH(2)O On CdTe nanoparticles was studied in an aqueous phase. The CdTe nanocrystals (NCs) were prepared in aqueous solution through the reaction between Cd2+ and NaHTe in the presence of thioglycolic acid as a stabilizer. The molar ratio of the Cd2+ to Te2- in the precursory solution played an important role in the photoluminescence of the ultimate CdTe NCs. The strongest photoluminescence was obtained under 4.0 of [Cd2+]/[Te2-] at pH similar to 8.2. With the optimum dosage of Cd(II) hydrous oxide deposited on the CdTe NCs, the photoluminescence was enhanced greatly. The photoluminescence of these nanocomposites was kept constant in the pH range of 8.0-10.0, but dramatically decreased with an obvious blue-shifted peak while the pH was below 8.0. In addition, the photochemical oxidation of CdTe NCs with cadmium hydrous oxide deposition was markedly inhibited.

First occurrence of Mosasauridae (Squamata) in the Maastrichtian (latest Cretaceous) of Alicante (Valencia Community, Eastern Spain)

8 p.

Temperature-and pH-Sensitive Nanohydrogels of Poly(N-Isopropylacrylamide) for Food Packaging Applications: Modelling the Swelling-Collapse Behaviour

Temperature-sensitive poly(N-isopropylacrylamide) (PNIPA) nanohydrogels were synthesized by nanoemulsion polymerization in water-in-oil systems. Several cross-linking degrees and the incorporation of acrylic acid as comonomer at different concentrations were tested to produce nanohydrogels with a wide range of properties. The physicochemical properties of PNIPA nanohydrogels, and their relationship with the swelling-collapse behaviour, were studied to evaluate the suitability of PNIPA nanoparticles as smart delivery systems (for active packaging). The swelling-collapse transition was analyzed by the change in the optical properties of PNIPA nanohydrogels using ultraviolet-visible spectroscopy. The thermodynamic parameters associated with the nanohydrogels collapse were calculated using a mathematical approach based on the van't Hoff analysis, assuming a two-state equilibrium (swollen to collapsed). A mathematical model is proposed to predict both the thermally induced collapse, and the collapse induced by the simultaneous action of two factors (temperature and pH, or temperature and organic solvent concentration). Finally, van't Hoff analysis was compared with differential scanning calorimetry. The results obtained allow us to solve the problem of determining the molecular weight of the structural repeating unit in cross-linked NIPA polymers, which, as we show, can be estimated from the ratio of the molar heat capacity (obtained from the van't Hoff analysis) to the specific heat capacity (obtained from calorimetric measurements).

Studies of the equation of state and elasticity of mantle minerals

Because the Earth’s upper mantle is inaccessible to us, in order to understand the chemical and physical processes that occur in the Earth’s interior we must rely on both experimental work and computational modeling. This thesis addresses both of these geochemical methods. In the first chapter, I develop an internally consistent comprehensive molar volume model for spinels in the oxide system FeO-MgO-Fe₂O₃-Cr₂O₃-Al₂O₃-TiO₂. The model is compared to the current MELTS spinel model with a demonstration of the impact of the model difference on the estimated spinel-garnet lherzolite transition pressure. In the second chapter, I calibrate a molar volume model for cubic garnets in the system SiO₂-Al₂O₃-TiO₂-Fe₂O₃-Cr₂O₃-FeO-MnO-MgO-CaO-Na₂O. I use the method of singular value analysis to calibrate excess volume of mixing parameters for the garnet model. The implications the model has for the density of the lithospheric mantle are explored. In the third chapter, I discuss the nuclear inelastic X-ray scattering (NRIXS) method, and present analysis of three orthopyroxene samples with different Fe contents. Longitudinal and shear wave velocities, elastic parameters, and other thermodynamic information are extracted from the raw NRIXS data.

Water in silicate glasses

The speciation of water in a variety of hydrous silicate glasses, including simple and rhyolitic compositions, synthesized over a range of experimental conditions with up to 11 weight percent water has been determined using infrared spectroscopy. This technique has been calibrated with a series of standard glasses and provides a precise and accurate method for determining the concentrations of molecular water and hydroxyl groups in these glasses.

For all the compositions studied, most of the water is dissolved as hydroxyl groups at total water contents less than 3-4 weight percent; at higher total water contents, molecular water becomes the dominant species. For total water contents above 3-4 weight percent, the amount of water dissolved as hydroxyl groups is approximately constant at about 2 weight percent and additional water is incorporated as molecular water. Although there are small but measurable differences in the ratio of molecular water to hydroxyl groups at a given total water content among these silicate glasses, the speciation of water is similar over this range of composition. The trends in the concentrations of the H-bearing species in the hydrous glasses included in this study are similar to those observed in other silicate glasses using either infrared or NMR spectroscopy.

The effects of pressure and temperature on the speciation of water in albitic glasses have been investigated. The ratio of molecular water to hydroxyl groups at a given total water content is independent of the pressure and temperature of equilibration for albitic glasses synthesized in rapidly quenching piston cylinder apparatus at temperatures greater than 1000°C and pressures greater than 8 kbar. For hydrous glasses quenched from melts cooled at slower rates (i.e., in internally heated or in air-quench cold seal pressure vessels), there is an increase in the ratio of molecular water to hydroxyl group content that probably reflects reequilibration of the melt to lower temperatures during slow cooling.

Molecular water and hydroxyl group concentrations in glasses provide information on the dissolution mechanisms of water in silicate liquids. Several mixing models involving homogeneous equilibria of the form H_2O + O = 20H among melt species have been explored for albitic melts. These models can account for the measured species concentrations if the effects of non-ideal behavior or mixing of polymerized units are included, or by allowing for the presence of several different types of anhydrous species.

A thermodynamic model for hydrous albitic melts has been developed based on the assumption that the activity of water in the melt is equal to the mole fraction of molecular water determined by infrared spectroscopy. This model can account for the position of the watersaturated solidus of crystalline albite, the pressure and temperature dependence of the solubility of water in albitic melt, and the volumes of hydrous albitic melts. To the extent that it is successful, this approach provides a direct link between measured species concentrations in hydrous albitic glasses and the macroscopic thermodynamic properties of the albite-water system.

The approach taken in modelling the thermodynamics of hydrous albitic melts has been generalized to other silicate compositions. Spectroscopic measurements of species concentrations in rhyolitic and simple silicate glasses quenched from melts equilibrated with water vapor provide important constraints on the thermodynamic properties of these melt-water systems. In particular, the assumption that the activity of water is equal to the mole fraction of molecular water has been tested in detail and shown to be a valid approximation for a range of hydrous silicate melts and the partial molar volume of water in these systems has been constrained. Thus, the results of this study provide a useful thermodynamic description of hydrous melts that can be readily applied to other melt-water systems for which spectroscopic measurements of the H-bearing species are available.

Liquid silicate equation of state : using shock waves to understand the properties of the deep Earth

The equations of state (EOS) of several geologically important silicate liquids have been constrained via preheated shock wave techniques. Results on molten Fe₂SiO₄ (fayalite), Mg₂SiO₄ (forsterite), CaFeSi₂O₆ (hedenbergite), an equimolar mixture of CaAl₂Si₂O₈-CaFeSi₂O₆ (anorthite-hedenbergite), and an equimolar mixture of CaAl₂Si₂O₈-CaFeSi₂O₆-CaMgSi₂O₆(anorthite-hedenbergite-diopside) are presented. This work represents the first ever direct EOS measurements of an iron-bearing liquid or of a forsterite liquid at pressures relevant to the deep Earth (> 135 GPa). Additionally, revised EOS for molten CaMgSi₂O₆ (diopside), CaAl₂Si₂O₈ (anorthite), and MgSiO₃ (enstatite), which were previously determined by shock wave methods, are also presented.

The liquid EOS are incorporated into a model, which employs linear mixing of volumes to determine the density of compositionally intermediate liquids in the CaO-MgO-Al₂O₃-SiO₂-FeO major element space. Liquid volumes are calculated for temperature and pressure conditions that are currently present at the core-mantle boundary or that may have occurred during differentiation of a fully molten mantle magma ocean.

The most significant implications of our results include: (1) a magma ocean of either chondrite or peridotite composition is less dense than its first crystallizing solid, which is not conducive to the formation of a basal mantle magma ocean, (2) the ambient mantle cannot produce a partial melt and an equilibrium residue sufficiently dense to form an ultralow velocity zone mush, and (3) due to the compositional dependence of Fe2+ coordination, there is a threshold of Fe concentration (molar X_Fe ≤ 0.06) permitted in a liquid for which its density can still be approximated by linear mixing of end-member volumes.

Expressão e distribuição de CGRP, VEGF e TGF-β na gengiva dos dentes de ratos com periodontite induzida por ligadura: aspectos imunohistoquímicos

No momento em que há a agressão tecidual e a defesa inata é deflagrada, mediadores químicos são liberados no local afetado. Esses mediadores podem ser de origem celular tais como CGRP, VEGF e TGFß. Os objetivos desta pesquisa foram avaliar a expressão e distribuição de CGRP, TGFß e VEGF na gengiva do primeiro molar inferior esquerdo de rato no 7 e 14 dias após a indução por ligadura; a expressão e distribuição de CGRP, TGFß e VEGF na gengiva do dente contralateral correspondente sem ligadura, no 7 e 14 dias, e se a indução da periodontite por ligadura no dente experimental provoca uma inflamação na gengiva do dente contralateral correspondente no 7 e 14 dias após a ligadura. Para o desenvolvimento deste trabalho foram selecionados 15 ratos Rattus Novergicus, Albinus, Wistar. O grupo experimental de 12 ratos foi dividido em 2 subgrupos compostos por 6 ratos cada um deles distribuídos da seguinte maneira: os do subgrupo A1 permaneceram com a ligadura no primeiro molar inferior esquerdo por 7 dias e foram sacrificados; os do subgrupo A-2 -permaneceram com a ligadura no primeiro molar inferior esquerdo por 14 dias e foram sacrificados. Outros três animais constituíram o grupo controle. Após o sacrifício dos 12 animais dos grupos experimentais e controle suas mandíbulas foram colocadas em ácido etilenodiaminotetracético (EDTA) neutro para sofrerem descalcificação. Então foram processadas para inclusão em parafina e os cortes histológicos foram corados pela hematoxilina-eosina e submetidos à técnica imunohistoquímica para imunomarcação de CGRP, VEGF e TGFß. Aos 7 dias de ligadura observou-se na lâmina própria gengival, epitélio juncional e epitélio oral, expressiva marcação para CGRP. A expressão de VEGF foi intensa na lamina própria e com pouca ou nenhuma marcação no epitélio oral e juncional. O TGFß apresentou pouca marcação na lâmina própria ou nenhuma marcação no epitélio oral e juncional. Aos 14 dias de ligadura houve expressiva marcação de CGRP na lâmina própria, epitélios oral e juncional. O VEGF e o TGFß apresentaram muita marcação na lâmina própria e pouca ou nenhuma marcação no epitélio oral e juncional. Na gengiva dos dentes contralaterais nos 7 e 14 dias houve pouca marcação do CGRP do TGFß na lâmina própria e muita marcação do VEGF. Na gengiva dos dentes controle observou-se muita marcação do CGRP no epitélio juncional e oral e na lâmina própria. O TGFß e o VEGF se expressaram muito pouco ou não se expressaram. Devido à marcação expressiva do VEGF na lâmina própria dos dentes contralaterais, permanece inconclusiva a adequação do uso dos dentes contralaterais nos estudos experimentais das doenças periodontais, embora a expressão de TGFß e CGRP tenham sido menores nestes dentes. A maior marcação do CGRP, VEGF e TGFß nos animais com 14 dias de ligadura do que aos 7 dias demonstra a progressão do processo inflamatório crônico, não se observando processo de reparação cicatricial.

Remoção de metais pesados de efluentes sintéticos aquosos por nanofiltração

O objetivo deste trabalho foi estudar a remoção de metais pesados de efluentes sintéticos aquosos através de nanofiltração, com utilização de membrana de poliamida. A membrana utilizada constituída de poliamida apresentou uma boa permeabilidade hidráulica, constatada pela linearidade de fluxo com a variação de pressão de trabalho. Os metais estudados foram cobre, cádmio, zinco, chumbo e níquel com especiação de nitrato e sulfato. O desempenho do sistema foi verificado pela variação dos parâmetros operacionais (pressão e fluxo), associados também com a variação da salinidade e da concentração do metal. Em uma etapa inicial estudou-se a remoção de metais (nitrato e sulfato) isoladamente em uma mesma concentração molar, na pressão de 10 bar, comparando-se as rejeições com e sem agente complexante (EDTA). Em uma segunda etapa, estudou-se o desempenho da membrana, com misturas dos metais (nitrato) e mistura de metais (sulfato), também com e sem agente complexante, os resultados mostraram que a presença de agente complexante melhorou a rejeição dos metais. Nestas misturas estudaram-se os efeitos das concentrações (0,001; 0,0005 e 0,0001mol/L) e das pressões (5; 7; 10 e 12,5 bar) no sistema de remoção, constatou-se que o aumento da concentração e diminuição da pressão afeta a remoção. Em uma terceira etapa, estudou-se a influência da salinidade pela mistura de dois metais de mesma especiação (sulfato), comparando a remoção na pressão de 10 bar. Os resultados atestaram uma rejeição maior que 94 % para todos metais, na pressão de 10 bar, indicando um excelente desempenho e fluxo adequado, daí viabilidade de processo para todas as concentrações testadas. A pertinência do teste se justifica pela adequação do permeado ao atendimento aos padrões ambientais de concentração de metais e confirmam a eficácia do sistema de nanofiltração na remoção de metais pesados