Efeito da tecnologia de microondas nas propriedades tecnológicas dos componentes de cerâmica estrutural

O processamento térmico de materiais cerâmicos via energia de microondas, no estágio atual, vem ganhando cada dia mais importância, tendo em vista suas inúmeras aplicações, como por exemplo: aplicação de microondas na área de processamento mineral (aquecimento de minérios antes da moagem, secagem, redução carbotérmica de óxidos minerais, lixiviação, fusão, pré-tratamento de minérios e concentrados de ouro refratário, regeneração de carvão, etc. de acordo com Kigman & Rowson, 1998). Em virtude de uma série de vantagens em potencial, frente aos métodos convencionais de aquecimento, como redução no tempo de processamento; economia de energia; diminuição do diâmetro médio das partículas e melhoramento nas propriedades tecnológicas em geral, esta tecnologia vem se destacando. Neste contexto, o objetivo geral deste trabalho, é desenvolver uma pesquisa visando identificar e caracterizar novas opções de matérias-primas cerâmicas como argilas, feldspatos e caulins que sejam eficazes para definir a formulação de uma ou mais massas para produção de componentes de cerâmica estrutural com propriedades físicas, mecânicas e estéticas adequadas após passarem por sinterização convencional e por energia de microondas destacando as vantagens desta última. Além dos requisitos técnicos e de processo, as formulações apresentadas deverão atender às expectativas de preço e de logística de fornecimento. No estudo foram conformados corpos-de-prova por extrusão e prensagem, sinterizados em fornos microondas e convencional, sob ciclos de queima mais rápidos que os atualmente praticados. As matérias-primas foram caracterizadas e analisadas, utilizando as técnicas de fluorescência por raios X (FRX), difração por raios X (DRX), análise térmica diferencial (DTA), análise térmica gravimétrica (DTG), análise granulométrica (AG), microscopia eletrônica de varredura (MEV), absorção d agua (AA), massa especifica aparente (MEA), porosidade aparente (PA), retração linear (RL) e tensão de ruptura e flexão (TRF). Os resultados obtidos indicaram que as propriedades tecnológicas de Absorção de água (AA) e Tensão de Ruptura e flexão (TRF), proposto no trabalho foram adquiridos com sucesso e estão bem além do limite exigido pelas especificações das normas da ABNT NBR 15.270/05 e 15.310/09

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Efeito da velocidade de aquecimento nas propriedades de produtos da cerâmica estrutural

Heating rate is one of the main variables that determine a fire cycle. In industrial processes that use high temperatures, greater fire great can reduce the cost of production and increase productivity. The use of faster and more efficient fire cycles has been little investigated by the structural ceramic industry in Brazil. However, one of the possibilities that aims at modernizing the sector is the use of roller kilns and the inclusion of natural gas as fuel. Thus, the purpose of this study is to investigate the effect of heating rate on the technological properties of structural ceramic products. Clay raw materials from the main ceramic industries in the state of Rio Grande do Norte were characterized. Some of the raw materials characterized were formulated to obtain the best physical and mechanical properties. Next, raw materials and formulations were selected to study the influence of heating rate on the final properties of the ceramic materials. The samples were shaped by pressing and extrusion and submitted to rates of 1 °C/min, 10 °C/min and 20 °C/min, with final temperatures of 850 °C, 950 °C and 1050 °C. Discontinuous cycles with rates of 10 °C/min or 15 °C/min up to 600 °C and a rate of 20 °C/min up to final temperature were also investigated. Technological properties were determined for all the samples and microstructural analysis was carried out under a number of fire conditions. Results indicate that faster and more efficient fire cycles than those currently in practice could be used, limiting only some clay doughs to certain fire conditions. The best results were obtained for the samples submitted to slow cycles up to 600 °C and fast fire sinterization up to 950 °C. This paper presents for the first time the use of a fast fire rate for raw materials and clay formulations and seeks to determine ideal dough and processing conditions for using shorter fire times, thus enabling the use of roller kilns and natural gas in structural ceramic industries

Estudo do perfil térmico de fornos do tipo "caipira" utilizados pelo setor de cerâmica vermelha em parelhas na região Seridó-RN

The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace

Design da tradição:a produção artesanal da cerâmica de Santana do São Francisco

A grande pluralidade cultural existente no Estado de Sergipe pode ser percebida através da variedade de produções artesanais que acontecem principalmente nos seus municípios, abrangendo um grande número de pessoas que fazem dela uma atividade geradora de economia. O presente trabalho trata da problemática da produção da cerâmica artesanal do município de Santana do São Francisco, considerado como o maior produtor de cerâmica do estado. Sob o ponto de vista antropológico, o trabalho apresenta relatos de vida e detalhes da sobrevivência do ofício, herdados através das gerações, bem como as ferramentas e alternativas encontradas pela comunidade e suas adaptações e transformações como forma de conservação da tradição do saber fazer

Reforma administrativa e gestão de políticas sociais em Mossoró: a falácia dos atores institucionais e sociais

The thesis entitled The administrative reform and social political management in Mossoró: the institutional and social staff's falacy. Comprehends a moment of apprehensiveness and analysis in the reestrcturing process of the city, whose process will show the formation of strategies and deployment of its relation with the social political affectiveness. It represents a single moment in the approach of such a kind of experience in the city. The analysis starts from the third mandate of the Mayor Rosalba Ciarlini Rosado, during the quadriennium 2001/2004, for being the time in which the public management got materialized, such as in the operational way of the social politics. For that, we delimitate this study in two distinct moments: the first one refers to the reform elaboration from the creation of the additional law nº 001/2000 GP/PMM: the second one refers to a practical reform from the social and institutional staff's speech. Within that scenary it was seen that the approaching, though partially, the State Reform and, consequently, the master plan of the state apparatus, which were made of theoretical matrices of such a project locally. However, that is a complex experience, that required the use of field and documental research for the proposed investigation and at the same time, prove the guiding hypothesis of it, what means a grouping of areas like: education, healthy, and social development in only one department City Citizenship Department that is able to materialize a new intitutional arrangement, according to the management principles in the public administration at the govern local level, configuring a reform and not just an institutional adequacy. In that context, it got necessary to apprehending the institutional and social actors' falacy as a way to prove or not the presented hypothesis. Among the first staff, we have the mayor's direct leaders and advisors' perception that express the politcal administrative aspects of the reform and, in the second, the perception of the political view of what has changed concerning the management of the social politics

Federalismo cooperativo e o exercício da competência administrativa ambiental

This paper aims to discuss the conflicts of competence in environmental matters, as well as the legitimacy of the normative acts in the exercise of jurisdiction effected environmental management. For this work, addresses the issue of federalism, North American (dual) and German (cooperative), deepening its historical and theoretical fundamentals, as well as the influences on the evolution of the ideological matrix of Brazilian federalism. Distinguishes itself around the problem the theoretical and abstract discussion involving the constitutional division of powers, and the issue of his relationship with the vicissitudes in the embracement of environmental matters that invariably leads to mistakes in the exercise of jurisdiction environmental management. Its highlight the existence of a framework environmental law, embodying the principles themselves as well as a specific object of authority, which qualifies a different interpretation of the rules of constitutional powers as well as influencing the acting agent of government in managing the public good environment. The study represents an exploratory research as it investigates the depths of the institutes are in evidence not only with satisfying its practical outcome. For this to happen, explores bibliographical sources and identified by the science of law as more important, as the search for social-political boundary which takes the issue studied in their historical and contextual materiality, whose study is essential for a complete understanding of the topic . The dialectic that arguments have been constructed throughout the monograph, attempts to pass a critical way to expose the author's ideas, which considers as essential in the arrival of new questions

O princípio constitucional da legalidade administrativa e os limites do controle das atividades-fim das agências reguladoras pelo Tribunal de Contas da União

Analysis of the role of the Union Accounts Court on the control of regulatory agencies, with the objective of identifying the limits of the Institution s acting on the aim activities of the agencies, particularly the control limits of the Court on the merits of discretionary administrative actions, taking into account the autonomy of these entities in the model of regulatory state. Analyzes the principle of administrative legality, the control of public administration, state s action in the economy and facing regulatory agencies, their emergence, evolution and characteristics. Includes the study of jurisprudence and doctrinal differences, as for the limits of the powers conferred by the constitutional legislator to Federal Court of Audit, regarding the control of agencies aim activities, or, in other terms, their regulatory and inspector missions of market, under the principle of administrative legality. Performs analysis, based on case studies involving Court s audits on regulatory agencies. Are appreciated differences within the Institution about the their decisions effects - imposed or not - as regards the arrangements to be adopted by regulatory agencies to correct the flaws and omissions found during Court s inspections, in which content of the act of public agent, despite their technical nature, can happen the criterion of convenience and opportunity

Participação administrativa processual na administração pública dialógica

The dissertation, which is based on the deductive method, by using general concepts of the theory of the administrative participation in the administrative process, addresses the importance of strengthening administrative and procedural activities of citizen involvement in public administration for the administrative consolidation of democracy in Brazil. The emergence of Administrative Law has particular importance for the understanding of its institutions and, of course, for the different fields of public administration. The authoritarian profile of this area of law still exists as a clear recollection of their origin, mainly based on a relationship of superiority of the state over the individuals. Indeed, does not even modern constitutionalism could print a true democracy administrative, since the constitutions were not properly observed by the Government. Furthermore, only the process of constitutionalization of administrative law legal relations took a more democratic profile. That is, the creation of an environment of dialogue with civil society is a recent achievement of the Brazilian government. As the administrative process involves dilemmas and solutions of state action, because it is revealed the expression government, the strengthening of institutions and principles related to the administrative procedure is important for role in making a more participatory relationship between state and citizen. Thus, administrative participation can be considered not only a mechanism of control and legitimacy of state action, but also for improvement and reduction of administrative costs, as a requirement of the principle of efficiency. The objective of this investigation is to assert as the administrative legal relation, the administrative legality, the administrative jurisdiction, the processuality administrative, the consensuality administrative and administrative justice, together with administrative participation, can contribute to a more democratic role of the Public Administration and, therefore, more dialogic and consolidator of the fundamental rights of citizens. Therefore, we highlight the importance of the administrative process and administrative participation as mechanisms for improving public policy and thus as a means of reducing administrative costs mediate the state

A Servidão Administrativa e o Estado Regulador: Compatibilidade com o Princípio Constitucional da Legalidade e a Limitação ao Direito Real de Propriedade

The economic changes occurred in the 90s, with the restructuring and privatization of various sectors of the economy have led to a redefinition of the State role, assuming a position of regulator and supervisor of public services in place to direct its role as straight intervenor. It is through the regulatory agencies, autarchies with special legal personality under public law, that the Regulator State will act. In this context, the first objective of this research is to analyze the legality of easements imposed by entities of the Direct Administration and Regulatory Agencies, whose execution is delegated to legal persons of private law, being those public service companies or mixed-economy societies. This examination in question the limits of servitude as a restrictive institute of property rights, observing the principles of function, supremacy of the public interests over the private ones, legality and the separation of powers. Defend the property rights like a fundamental right and your insurance as determining factor of economic development and social justice. Use the procedure in use will be the historiccomparative procedure, in order to demonstrate the legality of the public act as a maximum attempt to preserve the balance between the expansion of public services in various sectors of the economy, and the preservation of property rights, through regulation

Práticas etnomatemáticas no Liceu do Paracuri :a propósito dos ornamentos geométricos da cerâmica

The present study analyzes the ethnomatematics practices presents in the creation of the geometric ornaments of the icoaraciense ceramic, originated and still practiced in the neighborhood of Paracuri, District of Icoaraci, belonging to Belém, capital of the State of Pará/Brasil. The object of our study was centered at the workshops supplied by the artisans master of the School of Arts and Occupations, Master Raimundo Cardoso. Referred school provides to its students, formation at fundamental level as well professional formation, through vocational workshops that help to maintain alive the practice of the icoaraciense ceramic. Our interest of researching that cultural and vocational practice appeared when we got in touch with that School, during the development of activities of a discipline of the degree course of mathematics. In order to reach our objective, we accomplished, initially, a research about the icoaraciense ceramic historic, since the first works with the clay until to the main characteristics of that ceramic. Soon afterwards, we discussed on ethnomatematics, culture, knowledge, cognition and mathematical education. At the end, we analyzed the creation of the geometric ornaments of the icoaraciense ceramic, considering the proportion concepts, symmetry and some geometry notions, that are used by the artisans when they are ornamenting the pieces of that ceramic. We verified that, in spite of the artisans, usually, do not demonstrate to possess a bit of domain on the mathematical concepts that they are working with, for instance, the ones of translaction symmetry, rotation and reflection, they demonstrate full safety in the use of those concepts, as well as the capacity to recognize them, even if in a singular specific and very peculiar way, what opens the possibility of a partnership among mathematics teachers and master-artisans of the archeological ceramic and icoaraciense workshops

Análise de critérios de decisão em estratégia de arranjos produtivos locais: um estudo aplicando o processo de hierarquia analítica (AHP) no setor de cerâmica

This master thesis has the objective of investigating the strategic decision criteria of participants of Local Production Arrangements (LPA) in Brazil. The LPA s are an initiative of support agents to enterprises with the purpose of organizing joint actions for the development of groups (clusters) of enterprises. The choice of the actions is a decision of the participating enterprises and this paper aims at applying a Multi-criteria Analysis Method to analyze the criteria of entrepreneurs that are participating of a LPA. The used method is the Process of Analytical Hierarchy (PAH) and an application is presented along with questionnaires to participants of a ceramic LPA in the northeast of Brazil. The main results show that, in first place, from the implicit strategy of each enterprise there is only one objective for the LPA group and so, at the beginning, an action decided by all of them tends to favor some more than others. In second place, it was observed that there are general inconsistencies between the strategic objectives and the importance as to criteria, even though there have been cases of coherency. As the main conclusion it is pointed that the use of Methods of MCDA is useful to improve the decision making process and to bring more transparency to the logic of the found results