Inhibition of in vitro CO2 production and lipid synthesis by 2-hydroxybutyric acid in rat brain

2-Hydroxybutyric acid appears at high concentrations in situations related to deficient energy metabolism (e.g., birth asphyxia) and also in inherited metabolic diseases affecting the central nervous system during neonatal development, such as "cerebral" lactic acidosis, glutaric aciduria type II, dihydrolipoyl dehydrogenase (E3) deficiency, and propionic acidemia. The present study was carried out to determine the effect of 2-hydroxybutyric acid at various concentrations (1-10 mM) on CO2 production and lipid synthesis from labeled substrates in cerebral cortex of 30-day-old Wistar rats in vitro. CO2 production was significantly inhibited (30-70%) by 2-hydroxybutyric acid in cerebral cortex prisms, in total homogenates and in the mitochondrial fraction. We also demonstrated a significant inhibition of lipid synthesis (20-45%) in cerebral cortex prisms and total homogenates in the presence of 2-hydroxybutyric acid. However, no inhibition of lipid synthesis occurred in homogenates free of nuclei and mitochondria. The results indicate an impairment of mitochondrial energy metabolism caused by 2-hydroxybutyric acid, a fact that may secondarily lead to reduction of lipid synthesis. It is possible that these findings may be associated with the neuropathophysiology of the situations where 2-hydroxybutyric acid is accumulated.

Transformation of carbon dioxide to diethyl carbonate over ceria and ceria-supported catalysts

Carbon dioxide is regarded, nowadays, as a primary anthropogenic greenhouse gas leading to global warming. Hence, chemical fixation of CO2 has attracted much attention as a possible way to manufacture useful chemicals. One of the most interesting approaches of CO2 transformations is the synthesis of organic carbonates. Since conventional production technologies of these compounds involve poisonous phosgene and carbon monoxide, there is a need to develop novel synthetic methods that would better match the principles of "Green Chemistry" towards protection of the environment and human health. Over the years, synthesis of dimethyl carbonate was under intensive investigation in the academia and industry. Therefore, this study was entirely directed towards equally important homologue of carbonic esters family namely diethyl carbonate (DEC). Novel synthesis method of DEC starting from ethanol and CO2 over heterogeneous catalysts based on ceria (CeO2) was studied in the batch reactor. However, the plausible drawback of the reaction is thermodynamic limitations. The calculated values revealed that the reaction is exothermic (ΔrHØ298K = ─ 16.6 J/ ) and does not occur spontaneously at rooms temperature (ΔrGØ 298K = 35.85 kJ/mol). Moreover, co-produced water easily shifts the reaction equilibrium towards reactants excluding achievement of high yields of the carbonate. Therefore, in-situ dehydration has been applied using butylene oxide as a chemical water trap. A 9-fold enhancement in the amount of DEC was observed upon introduction of butylene oxide to the reaction media in comparison to the synthetic method without any water removal. This result confirms that reaction equilibrium was shifted in favour of the desired product and thermodynamic boundaries of the reaction were suppressed by using butylene oxide as a water scavenger. In order to obtain insight into the reaction network, the kinetic experiments were performed over commercial cerium oxide. On the basis of the selectivity/conversion profile it could be concluded that the one-pot synthesis of diethyl carbonate from ethanol, CO2 and butylene oxide occurs via a consecutive route involving cyclic carbonate as an intermediate. Since commercial cerium oxide suffers from the deactivation problems already after first reaction cycle, in-house CeO2 was prepared applying room temperature precipitation technique. Variation of the synthesis parameters such as synthesis time, calcination temperature and pH of the reaction solution turned to have considerable influence on the physico-chemical and catalytic properties of CeO2. The increase of the synthesis time resulted in high specific surface area of cerium oxide and catalyst prepared within 50 h exhibited the highest amount of basic sites on its surface. Furthermore, synthesis under pH 11 yielded cerium oxide with the highest specific surface area, 139 m2/g, among all prepared catalysts. Moreover, CeO2─pH11 catalyst demonstrated the best catalytic activity and 2 mmol of DEC was produced at 180 oC and 9 MPa of the final reaction pressure. In addition, ceria-supported onto high specific surface area silicas MCM-41, SBA-15 and silica gel were synthesized and tested for the first time as catalysts in the synthesis of DEC. Deposition of cerium oxide on MCM-41 and SiO2 supports resulted in a substantial increase of the alkalinity of the carrier materials. Hexagonal SBA-15 modified with 20 wt % of ceria exhibited the second highest basicity in the series of supported catalysts. Evaluation of the catalytic activity of ceria-supported catalysts showed that reaction carried out over 20 wt % CeO2-SBA-15 generated the highest amount of DEC.

Foreign Direct Investment, Clean Development Mechanism, and Environmental Management: A case of Sub-Saharan Africa

This doctoral dissertation explores the contribution of environmental management practices, the so-called clean development mechanism (CDM) projects, and foreign direct investment (FDI) in achieving sustainable development in developing countries, particularly in Sub- Saharan Africa. Because the climate change caused by greenhouse gas emissions is one of the most serious global environmental challenges, the main focus is on the causal links between carbon dioxide (CO2) emissions, energy consumption, and economic development in Sub-Saharan Africa. In addition, the dissertation investigates the factors that have affected the distribution of CDM projects in developing countries and the relationships between FDI and other macroeconomic variables of interest. The main contribution of the dissertation is empirical. One of the publications uses crosssectional data and Tobit and Poisson regressions. Three of the studies use time-series data and vector autoregressive and vector error correction models, while two publications use panel data and panel data estimation methods. One of the publications uses thus both timeseries and panel data. The concept of Granger causality is utilized in four of the publications. The results indicate that there are significant differences in the Granger causality relationships between CO2 emissions, energy consumption, economic growth, and FDI in different countries. It appears also that the causality relationships change over time. Furthermore, the results support the environmental Kuznets curve hypothesis but only for some of the countries. As to CDM activities, past emission levels, institutional quality, and the size of the host country appear to be among the significant determinants of the distribution of CDM projects. FDI and exports are also found to be significant determinants of economic growth.

Weld joint characteristics by nano-materials addition

The need for industries to remain competitive in the welding business, has created necessity to develop innovative processes that can exceed customer’s demand. Significant development in improving weld efficiency, during the past decades, still have their drawbacks, specifically in the weld strength properties. The recent innovative technologies have created smallest possible solid material known as nanomaterial and their introduction in welding production has improved the weld strength properties and to overcome unstable microstructures in the weld. This study utilizes a qualitative research method, to elaborate the methods of introducing nanomaterial to the weldments and the characteristic of the welds produced by different welding processes. The study mainly focuses on changes in the microstructural formation and strength properties on the welded joint and also discusses those factors influencing such improvements, due to the addition of nanomaterials. The effect of nanomaterial addition in welding process modifies the physics of joining region, thereby, resulting in significant improvement in the strength properties, with stable microstructure in the weld. The addition of nanomaterials in the welding processes are, through coating on base metal, addition in filler metal and utilizing nanostructured base metal. However, due to its insignificant size, the addition of nanomaterials directly to the weld, would poses complications. The factors having major influence on the joint integrity are dispersion of nanomaterials, characteristics of the nanomaterials, quantity of nanomaterials and selection of nanomaterials. The addition of nanomaterials does not affect the fundamental properties and characteristics of base metals and the filler metal. However, in some cases, the addition of nanomaterials lead to the deterioration of the joint properties by unstable microstructural formations. Still research are ongoing to achieve high joint integrity, in various materials through different welding processes and also on other factors that influence the joint strength.

Climatic changes: what if the global increase of CO2 emissions cannot be kept under control?

Climatic changes threaten the planet. Most articles related to the subject present estimates of the disasters expected to occur, but few have proposed ways to deal with the impending menaces. One such threat is the global warming caused by the continuous increase in CO2 emissions leading to rising ocean levels due to the increasing temperatures of the polar regions. This threat is assumed to eventually cause the death of hundreds of millions of people. We propose to desalinize ocean water as a means to reduce the rise of ocean levels and to use this water for populations that need good quality potable water, precisely in the poorest regions of the planet. Technology is available in many countries to provide desalinated water at a justifiable cost considering the lives threatened both in coastal and desertified areas.

Central chemoreceptors and neural mechanisms of cardiorespiratory control

The arterial partial pressure (P CO2) of carbon dioxide is virtually constant because of the close match between the metabolic production of this gas and its excretion via breathing. Blood gas homeostasis does not rely solely on changes in lung ventilation, but also to a considerable extent on circulatory adjustments that regulate the transport of CO2 from its sites of production to the lungs. The neural mechanisms that coordinate circulatory and ventilatory changes to achieve blood gas homeostasis are the subject of this review. Emphasis will be placed on the control of sympathetic outflow by central chemoreceptors. High levels of CO2 exert an excitatory effect on sympathetic outflow that is mediated by specialized chemoreceptors such as the neurons located in the retrotrapezoid region. In addition, high CO2 causes an aversive awareness in conscious animals, activating wake-promoting pathways such as the noradrenergic neurons. These neuronal groups, which may also be directly activated by brain acidification, have projections that contribute to the CO2-induced rise in breathing and sympathetic outflow. However, since the level of activity of the retrotrapezoid nucleus is regulated by converging inputs from wake-promoting systems, behavior-specific inputs from higher centers and by chemical drive, the main focus of the present manuscript is to review the contribution of central chemoreceptors to the control of autonomic and respiratory mechanisms.

Effect of vitamin D therapy in addition to amitriptyline on migraine attacks in pediatric patients

The purpose of this study was to investigate the effect of supplementary vitamin D therapy in addition to amitriptyline on the frequency of migraine attacks in pediatric migraine patients. Fifty-three children 8-16 years of age and diagnosed with migraine following the International Headache Society 2005 definition, which includes childhood criteria, were enrolled. Patients were classified into four groups on the basis of their 25-hydroxyvitamin D [25(OH)D] levels. Group 1 had normal 25(OH)D levels and received amitriptyline therapy alone; group 2 had normal 25(OH)D levels and received vitamin D supplementation (400 IU/day) plus amitriptyline; group 3 had mildly deficient 25(OH)D levels and received amitriptyline plus vitamin D (800 IU/day); and group 4 had severely deficient 25(OH)D levels and was given amitriptyline plus vitamin D (5000 IU/day). All groups were monitored for 6 months, and the number of migraine attacks before and during treatment was determined. Calcium, phosphorus alkaline phosphatase, parathormone, and 25(OH)D levels were also determined before and during treatment. Results were compared between the groups. Data obtained from the groups were analyzed using one-way analysis of variance. The number of pretreatment attacks in groups 1 to 4 was 7±0.12, 6.8±0.2, 7.3±0.4, and 7.2±0.3 for 6 months, respectively (all P>0.05). The number of attacks during treatment was 3±0.25, 1.76±0.37 (P<0.05), 2.14±0.29 (P<0.05), and 1.15±0.15 (P<0.05), respectively. No statistically significant differences in calcium, phosphorus, alkaline phosphatase, or parathormone levels were observed (P>0.05). Vitamin D given in addition to anti-migraine treatment reduced the number of migraine attacks.

PURIFICAÇÃO DE ÓLEOS VEGETAIS POR EXTRAÇÃO COM CO2 SUPERCRÍTICO

Este estudo constatou a possibilidade de extrairem-se ácidos graxos livres de óleos vegetais com CO2 supercrítico. Utilizou-se neste trabalho óleos de soja e de castanha do Pará. A pesquisa desenvolveu-se em duas etapas, inicialmente investigou-se a possibilidade de se extrairem os ácidos graxos destes óleos em condições de extração que variaram de 50-140 bar e de 40-80oC durante 40-160 minutos. Concluiu-se que é possível realizar a desacidificação de óleos vegetais. A eficiência da extração foi de aproximadamente 30% a 140 bar e 80oC para ambos os óleos. Após esta primeira etapa, o próximo passo foi a tentativa de obter-se um aumento na eficiência do processo promovendo a pré-degomagem nos óleos brutos como uma etapa anterior ao processo de desacidificação com CO2 supercrítico. A degomagem foi realizada através de dois métodos diferentes, um para extrair as gomas hidratáveis e outro para extrair tanto as hidratáveis como as não-hidratáveis. Os resultados experimentais foram obtidos a 140 bar e 80oC durante 40-160 minutos, mostrando que a pré-degomagem é realmente necessária, pois a eficiência da extração aumentou para 57% para o óleo de soja e 42% para o de castanha do Pará totalmente degomados, sendo que o método escolhido deve extrair tanto as gomas hidratáveis como as não-hidratáveis. Finalmente, utilizou-se cossolvente (etanol a 1-5% do peso do óleo) para auxiliar a extração, observando-se um aumento na eficiência para aproximadamente 65% para o óleo de soja e 56% para o de castanha do Pará totalmente degomados a 140 bar e 80oC por 40-160 minutos.

EXTRACTION OF OIL FROM PRESSED PALM OIL (Elaes guineensis) FIBERS USING SUPERCRITICAL CO2

Residual fibers from palm oil production are a good source of carotene, since they contain more than 5% of the original oil, with about 5000 ppm of carotenoids. As carotenoids are thermosensitive molecules, supercritical CO2 can be used for oil recovery, because this technique employs low temperatures. In this work results of oil extraction experiments from pressed palm oil fibers are shown. Fibers were from AGROPALMA, an industry which is located in Tailândia (Pará, Brazil). Extractions were carried out at 200, 250 and 300 bar and at temperatures of 45 and 55oC. Oil was analyzed by UV/vis spectrophotometry for total carotene determination. Results showed a large increase in extraction rate from 200 to 250 bar and a small variation from 250 to 300 bar. The total amount of carotenes did not increase in the course of extraction at 300 bar, but it showed a large increase at 200 and at 250 bar. Free fatty acids are present in amounts larger than those found in commercial oils.

THE EFFECTIVE DIFFUSIVITY OF CLOVE(Eugenia caryophyllus) ESSENTIAL OIL IN PRESSURIZED CO2

The effective diffusivity of clove essential oil in subcritical liquid CO2 was estimated. The experimental apparatus employed was a fixed-bed extractor. The fixed bed was formed with grounded (mesh -32 + 65) and compacted clove buds which were considered a solid element. The effective diffusion coefficient was evaluated by fitting the experimental concentration profile to the unsteady state mass balance equation for unidirectional diffusion in a finite solid medium. The diffusion coefficient was related to the concentration of oil in the solid by an exponential function. The estimated values of the effective diffusion coefficient varied from 3.64 to 5.22x10-10 m2/s. The average relative errors were lower than 3.1%.

EXTRAÇÃO DE OLEORESINA DE CÚRCUMA (Curcuma longa L) COM CO2 SUPERCRÍTICO

Dentre as fontes de corantes naturais mais utilizadas na indústria de alimentos, encontra-se a cúrcuma (Curcuma longa L), um rizoma do qual podem ser obtidas substâncias como a curcumina, demetoxicurcumina e bis-demetoxicurcumina. Estes pigmentos possuem coloração amarela e capacidade de substituir corantes artificiais. Com a finalidade de verificar a influência do pré-tratamento de secagem na extração, foram realizados experimentos de extração de oleoresina de cúrcuma com CO2 supercrítico, na unidade de extração do Laboratório de Engenharia Química da Universidade Federal do Pará, submetendo-se a matéria-prima a uma secagem nas temperaturas de 70 e 105oC. As extrações foram feitas a pressões de 200, 250 e 300 bar, e na temperatura de 45oC. Os resultados estão apresentados em tabelas e gráficos, em termos de rendimentos totais e teor de curcumina presente na oleoresina. A secagem a 70oC favoreceu a extração de oleoresina em termos de tempo de extração, e contribuiu para a manutenção de curcumina na matéria-prima.

EXTRAÇÃO DE LIPÍDEOS DA AMÊNDOA DE CASTANHA DE CAJU COM CO2 SUPERCRÍTICO

Nos últimos anos, vem crescendo o interesse em alimentos com baixo índice de calorias. Nos métodos tradicionais de extração de lipídeos com solventes orgânicos, devido as condições de extração, a integridade dos compostos extraídos e da matriz pode ser afetada pela decomposição térmica ou por contaminação pelo solvente. A extração com fluido supercrítico (EFSC) pode proporcionar um método alternativo para remover lipídeos, sem que haja redução significativa nas propriedades organolépticas do produto. O objetivo deste trabalho é extrair parcialmente o óleo contido na amêndoa da castanha de caju (Anacardium occidentale) com dióxido de carbono (CO2) supercrítico em condições de pressão de 100-170 bar e temperatura de 40-80 (C, para obter um produto de valor calórico reduzido que poderá ser usado como substituto para o amendoim e outras amêndoas na indústria de confeitos. Os experimentos foram realizados em um extrator de 300 ml, dispondo de sistemas de agitação magnética e variação de temperatura. Os resultados experimentais mostraram que o aumento da pressão acarretou um aumento na eficiência de extração. O efeito da temperatura foi o mesmo porém menos significativo.

COMPARISON OF GINGER (Zingiber officiale Roscoe) OLEORESIN OBTAINED WITH ETHANOL AND ISOPROPANOL WITH THAT OBTAINED WITH PRESSURIZED CO2

Ginger (Zingiber officinale Roscoe) belongs to the Zingiberacea family. It is a spice of great commercial importance. In this work ginger oleoresin was obtained with ethanol, isopropanol and liquid carbon dioxide. The chemical compositions of the extract were compared with each other. All oleoresin samples had monoterpenes and sesquiterpenes. Carboxylic acids were found in organic solvent extracts for an extraction time of 2 hours. The component responsible the for pungent characteristic of the oleoresin, gingerois, were detected in samples obtained with organic solvent for extraction times of 6 hours and in samples obtained with CO2 liquid for extraction times of 2 hours.

ANÁLISE TERMODINÂMICA DA DESTERPENAÇÃO DO ÓLEO DA CASCA DE LARANJA COM CO2 SUPERCRÍTICO A PARTIR DE UMA MISTURA SINTÉTICA

O projeto do processo de desterpenação do óleo da casca de laranja com CO2 supercrítico exige o bom conhecimento do comportamento de fases da mistura envolvida. Neste trabalho, faz-se uma análise termodinâmica preliminar desse processo, calculando-se a seletividade a partir da modelagem do equilíbrio líquido-vapor (ELV) para o sistema CO2-limoneno-linalol, com base em dados ternários medidos recentemente. Utilizou-se uma modificação da equação de Peng-Robinson e, com dados binários de ELV, avaliou-se a sua capacidade preditiva considerando-se 2 aspectos: a predição do equilíbrio a uma certa temperatura usando-se os parâmetros estimados em outra temperatura e a predição do comportamento de fases do sistema ternário com os parâmetros estimados dos sistemas binários. Foram determinados também os parâmetros de interação entre limoneno e linalol a partir dos dados experimentais do ternário.

MODELAGEM E SIMULAÇÃO DA DESTERPENAÇÃO DO ÓLEO DA CASCA DE LARANJA COM CO2 SUPERCRÍTICO EM MODO SEMI-CONTÍNUO

A desterpenação do óleo da casca de laranja com CO2 supercrítico foi investigada através da modelagem e simulação da separação de uma mistura sintética de limoneno (90 % em peso) e linalol (10 %), em um extrator operando em modo semi-contínuo. A modelagem matemática da extração supercrítica foi realizada por analogia com a destilação de uma mistura binária, em batelada, expressando-se a composição das fases em equilíbrio numa base molar livre de CO2. O cálculo das variáveis do processo foi feito por integração numérica da equação de Rayleigh empregando-se o método de Runge-Kutta de quarta ordem. Para a determinação da relação de equilíbrio entre as fases, adotou-se a equação de Peng-Robinson modificada, com os parâmetros de interação obtidos de dados de ELV dos sistemas binários CO2+limoneno e CO2+linalol e do ternário CO2+limoneno+linalol.