Chemical composition and fermentation characteristics of elephant grass silage with biodiesel industry co-products

The objective of this research was to evaluate the effect of three concentrations (3, 6, and 9%) of forage turnip (Raphanus sativus) and physic nut (Jatropha curcas) cakes on dry matter, crude protein, ether extract, neutral detergent fiber, acid detergent fiber, lignin, acid detergent insoluble nitrogen neutral detergent insoluble nitrogen contents, in vitro dry matter digestibility, pH values and concentrations of N-NH3 in elephant grass silages. It was used an entirely randomized design in factorial arrangement [(2x3)+1]. Experimental PVC silos were used and ensiled material was kept for 62 days. The addition of cakes increased the dry matter contents (P<0.05). The fibrous fractions were reduced (P<0.05) with the inclusion of cakes during the grass ensilage and the CP contents increased (P<0.05). The forage turnip cake provided the same pH and N-NH3 values in ideal levels and the physic nut, added to 9%, increased those values (P<0.05). IVDMD was reduced (P<0.05) when the cakes were added. These co-products can be used in small amounts for elephant grass ensilage in order to provide improvement in chemical and fermentation characteristics of the silages. Nevertheless, physic nut cake shows limitations for its use in animal feeding due to the presence of toxic compounds, making necessary studies for their identification and elimination.

Femur biometry, densitometry and chemical composition from Moxoto goats supplemented with concentrate in a semiarid region

The aim of study was to investigate if different intake levels of concentrate (supplementation levels) would have an influence on chemical composition, biometric aspects and bone mineral density (BMD) of femurs from Moxoto growing goats in the Brazilian semiarid region. Thirty-two castrated kids (15.69 +/- 0.78 kg initial BW) were used allocated randomly to one of the four levels of supplementation (SL) (treatments groups: 0: 5; 10 and 15 g/kg BW). When the animals of treatment group 15 g/kg BW reached 25 kg BW, the animals in the others treatments groups were also slaughtered. The increase SL resulted in linear increase (P<0.001) in the performance of animals as well as in fresh and dry weight of the femur and decrease of relative weight of the femur. The dry matter contents (g/kg) of femur increased linearly, however, the amounts of MM, ether extract, Ca, P. Mg, Na and K were not affected by the treatments. The values found in this study ranged from 134.84 to 155.90g of Ca, 48.14 to 55.95g of P. 1.69 to 1.87g of Mg, 2.87 to 3.24g of Na and 1.42 to 1.61 g of K/kg of bone in natura for animals with smaller and higher slaughter weight, respectively. The biometric and densitometric variables increased linearly with increasing treatments, except for the thickness of the sponge layer of the proximal and distal epiphysis and BMD measured in the distal epiphysis. The supplementation with concentrate did not affect the chemical composition of the femur, although it has positively influenced the structure and the bone mineral density. A BMD estimated via radiographic bone aluminum equivalent did not have correspondence with bone mineral content measured chemically. (C) 2011 Elsevier BM. All rights reserved.

Avaliação de indicadores internos em ensaios de digestibilidade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digestibilidade e degradabilidade de rações à base de milho desintegrado com palha e sabugo em diferentes graus de moagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estimativa da composição química corporal de tourinhos Santa Gertrudes a partir da composição química e física das 9-10-11ª costelas

Foram obtidas equações de regressão linear simples para estimar a composição química corporal de bovinos Santa Gertrudes, a partir da composição química e física do corte das 9-10-11ª costelas. Quinze tourinhos, entre nove a 15 meses de idade e de 220 a 505 kg de peso, foram mantidos confinados. Os animais foram abatidos após jejum completo de 18 horas, sendo que seis deles foram abatidos após adaptação. A composição química em água, proteína, extrato etéreo e minerais foi determinada no corte das costelas e em amostras obtidas após moagem completa e homogeneização de todos os tecidos corporais, divididos em: sangue, couro, cabeça + patas, vísceras e carcaça. A composição física do corte das costelas foi obtida por separação manual do músculo, gordura e ossos. O peso do corpo vazio foi altamente correlacionado ao peso da carcaça quente (r² = 0,99). As porcentagens de água e extrato etéreo das 9-10-11ª costelas mostraram-se altamente correlacionadas com a composição química do corpo vazio, o que não ocorreu para as porcentagens de proteína e minerais. Esses teores foram calculados pela composição do corpo vazio desengordurado. A composição física do corte das costelas foi eficiente para estimar as porcentagens de água, extrato etéreo e minerais do corpo vazio, utilizando-se a porcentagem de gordura separável das costelas, mas não para estimar o teor de proteína. A composição física do corte das costelas demonstrou ser uma técnica eficiente, mas a composição química apresentou maiores coeficientes de determinação e menores erros da estimativa. Como a porcentagem de água no corpo vazio e no corte das costelas (r² = 0,95), e as porcentagens de água e de extrato etéreo no corpo vazio foram altamente correlacionadas (r² = 0,94), a porcentagem de água no corte das 9-10-11ª costelas poderia ser a única variável para estimativa da composição química corporal.

Efeito do processamento da soja integral sobre a energia metabolizável e a digestibilidade dos aminoácidos para aves

Essa pesquisa foi desenvolvida para se avaliar o valor nutricional da soja integral submetida a diferentes processamentos. Quatro ensaios de metabolismo foram conduzidos para determinar os coeficientes de digestibilidade da matéria seca (CDMS), do extrato etéreo (CDEE) e dos aminoácidos e os valores de energia metabolizável aparente e verdadeira da soja integral desativada (SID) e extrusada (SIE) e das misturas de farelo de soja com óleo degomado de soja (FSO) ou com óleo ácido de soja (FSOA). Nos ensaios um e dois, utilizou-se a metodologia tradicional de coleta total de excretas com pintos e galos, respectivamente. A metodologia da alimentação forçada com galos adultos intactos foi utilizada no ensaio três, e com galos cecotomizados, no ensaio quatro. Os CDMS e CDEE e a energia metabolizável determinados com galos foram superiores aos determinados com pintos. Os maiores valores de CDMS, CDEE e de energia metabolizável foram obtidos para FSO, seguidos pelos da SIE e FSOA, e os menores, para a SID. O processo de extrusão proporcionou melhores resultados no aproveitamento da gordura do grão de soja e, conseqüentemente, da energia. Entretanto, a digestibilidade dos aminoácidos não foi influenciada pelos processamentos. Os diferentes processamentos conferiram à soja integral características nutricionais que se distinguiram, principalmente quanto ao valor de energia metabolizável, que também variou com a idade das aves.

Equações de predição da composição química corporal a partir do corte da 9-10-11ª costelas de bovinos castrados Nelore

Objetivou-se obter equações de regressão linear simples para estimativa da composição química corporal de novilhos Nelore a partir da composição química do corte da 9-10-11ª costelas. Foram utilizados 27 bovinos em confinamento, com 21 a 31 meses de idade e 338,0 a 503,6 kg de peso corporal. do total, foram abatidos seis animais (referência) ao início do experimento para estimativa da composição química corporal. A composição química em água, proteína, EE e cinzas foi determinada no corte da 9-10-11ª costelas e nos tecidos corporais. As equações de regressão para estimativa do peso de corpo vazio (PCVZ) a partir dos pesos de jejum (PV) e carcaça quente (PCQ) foram PCVZ = 0,8726 PV - 2,7399 e PCVZ = 1,5350 PCQ + 13,598 (R² = 0,98). O ganho de 1 kg de PCVZ correspondeu a aproximadamente 1,15 kg de PV. A porcentagem de água no corpo vazio (CVz) esteve altamente correlacionada às porcentagens de água (R² = 0,98) e EE (R² = 0,91) no corte das costelas. A equação mais indicada foi a desenvolvida a partir da porcentagem de água no corte das costelas (Sx, y = 0,46). Verificou-se alta correlação entre a porcentagem de EE no CVz e a porcentagem de EE (R² = 0,95) no corte das costelas, portanto, a equação %EE CVz = 0,9662%EE costelas + 1,5294 pode ser utilizada para estimativa da composição do CVz em EE. O mesmo ocorreu para a porcentagem de cinzas, sendo recomendada a equação %MM CVz = 0,5915%MM costelas + 0,7619 (R² = 0,88). A composição química percentual em água, EE e minerais no corte das 9-10-11ª costelas permitiu estimar com acuidade a composição do corpo vazio.

Composição em ácidos graxos e qualidade da carne de tourinhos Nelore e Canchim alimentados com dietas à base de cana-de-açúcar e dois níveis de concentrado

O objetivo neste trabalho foi avaliar a composição de ácidos graxos e a qualidade do contrafilé (músculo Longissimus lumborum) de tourinhos das raças Nelore e Canchim. Os animais foram terminados em confinamento e alimentados com dietas contendo cana-de-açúcar e dois níveis de concentrado (40 e 60% na matéria seca). Os concentrados foram compostos de grãos de girassol, milho, farelo de soja, levedura seca de cana-de-açúcar, uréia e núcleo mineral. O delineamento experimental foi o inteiramente ao acaso, em esquema fatorial 2 × 2 (grupo genético × nível de concentrado). Não foram observadas diferenças nos teores de umidade, proteína e extrato etéreo da carne. Os animais da raça Nelore apresentaram maiores concentrações de ácido linoléico conjugado (0,52%), ácidos graxos insaturados (46,82%) e também relações mais elevadas de ácidos graxos insaturados:saturados (1,02) e monoinsaturados:saturados (0,86) em comparação aos tourinhos da raça Canchim. Os tourinhos da raça Canchim apresentaram maior intensidade das cores vermelha e amarela no contrafilé e maior luminosidade da gordura de cobertura. Houve interação para força de cisalhamento, que foi menor nos tourinhos Nelore alimentados com 40% de concentrado. Tourinhos da raça Nelore apresentam carne com melhor composição de ácidos graxos na gordura intramuscular do ponto de vista da saúde humana.

Quantitative and qualitative characteristics of the non-carcass components and the meat of lambs fed sunflower seeds and vitamin E

The objective of this investigation was to evaluate the weight and percentage of the non-carcass components and the mineral content (macro minerals and trace minerals), crude protein, ether extract, moisture and vitamin E of the heart, liver, tongue, lungs, reticulum, kidneys and meat from the longissimus dorsi of lambs in feedlot finishing. Thirty-two non-castrated Ile de France male lambs, fed diets containing sunflower seeds and vitamin E from 15 to 32 kg of body weight were allotted in a completely randomized design in a 2 × 2 factorial arrangement. The weight of the gastrointestinal tract was higher in the lambs fed diets containing vitamin E (10%). No difference was observed in the liver as to the mineral matter, crude protein, ether extract, moisture (2.01; 20.03; 2.39 and 74.78 g/100 g, respectively), the macro minerals and trace minerals, except iron. In the tongue, lungs, reticulum, kidneys and meat there was no in fluence of diets in the studied variables. The liver and the meat presented different values of crude protein (20.01 and 18.34 g/100 g, respectively), and the heart (1.03 mg/100 g) showed a higher content of vitamin E. High contents of manganese, zinc and copper were observed in the liver. The evaluated non-carcass components were nutritionally equal to the sheep meat, once, in addition to their high yield in relation to the body weight at slaughter, the non-carcass components are sources of nutrients.

Animal performance and carcass characteristics of Nellore young bulls fed coated or uncoated urea slaughtered at different weights

The objective of this study was to evaluate animal performance and carcass characteristics of 64 Nellore young bulls at 22 months of age finished in a feedlot and slaughtered at five body weights (350; 455; 485; 555 and 580 kg) fed diets containing coated or uncoated urea. The experimental design adopted was completely randomized, set in a 4 × 2 factorial arrangement, and for the variables assessed in the control animals, it was 5 × 2. No effect of interaction between slaughter weights and diets were observed, so the variables were analyzed separately, compared by polynomial contrasts and by the F test, respectively. The time animals remained in the feedlot to reach slaughter weights was 66, 88, 145 and 194 days. Average daily gain (ADG) showed quadratic behavior, with a maximum of 1.44 kg/day with animals of 491.7 kg. Dry matter intake (DMI) (kg/day) was similar in all the treatments, but it decreased linearly as body weight increased. The bionutritional efficiency worsened linearly as body weight rose. The elevation in slaughter weight resulted in linear decrease in the percentage of beef round and increase in forequarter. Backfat thickness and rib eye area of the longissimus increased linearly and the percentages of muscle and protein in the carcass reduced and those of fat and ether extract increased linearly as body weight increased. Average daily gain, DMI, feed efficiency and carcass characteristics were not affected by diets containing coated or uncoated urea. However, animals fed coated urea presenter better crude fiber and neutral detergent fiber intake.

Desgaste de polímeros estruturais de engenharia em contato de deslizamento com cilindro metálico

Present work proposed to map and features the wear mechanisms of structural polymers of engineering derived of the sliding contact with a metallic cylindrical spindle submitted to eccentricity due to fluctuations in it is mass and geometric centers. For this it was projected and makes an experimental apparatus from balancing machine where the cylindrical counterbody was supported in two bearings and the polymeric coupon was situated in a holder with freedom of displacement along counterbody. Thus, the experimental tests were standardized using two position of the two bearings (Fixed or Free) and seven different positions along the counterbody, that permit print different conditions to the stiffness from system. Others parameters as applied normal load, sliding velocity and distance were fixed. In this investigation it was used as coupon two structural polymers of wide quotidian use, PTFE (polytetrafluroethylene) and PEEK (poly-ether-ether-ketone) and the AISI 4140 alloy steel as counterbody. Polymeric materials were characterized by thermal analysis (thermogravimetric, differential scanning calorimetry and dynamic-mechanical), hardness and rays-X diffractometry. While the metallic material was submitted at hardness, mechanical resistance tests and metallographic analysis. During the tribological tests were recorded the heating response with thermometers, yonder overall velocity vibration (VGV) and the acceleration using accelerometers. After tests the wear surface of the coupons were analyzed using a Scanning Electronic Microscopy (SEM) to morphological analysis and spectroscopy EDS to microanalysis. Moreover the roughness of the counterbody was characterized before and after the tribological tests. It was observed that the tribological response of the polymers were different in function of their distinct molecular structure. It were identified the predominant wear mechanisms in each polymer. The VGV of the PTFE was smaller than PEEK, in the condition of minimum stiffness, in function of the higher loss coefficient of that polymer. Wear rate of the PTFE was more of a magnitude order higher than PEEK. With the results was possible developed a correlation between the wear rate and parameter (E/ρ)1/2 (Young modulus, E, density, ρ), proportional at longitudinal elastic wave velocity in the material.

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Nutrientes na seiva de plantas cítricas fertirrigadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Recuperação e purificação de ramnolipídeos produzidos por pseudomonas aeruginosa P029-GVIIA utilizando melaço de cana como substrato

Biosurfactants are molecules produced by microorganisms mainly bacteria as Pseudomonas and Bacillus. Among the biosurfactants, rhamnolipids play an important role due to their tensoactive as well as emulsifying properties. Besides can be produced in a well consolidated way the production costs of biosurfactants are quite expansive mainly if downstream processing is goning to be considered. Actually, attention has been given to identification of biosurfactants as well as optimization of its fermentative processes including downstream ones. This work deals with the development of strategies to recovery and purification of rhamnolipids produced by Pseudomonas aeruginosa P029-GVIIA using sugar-cane molasses as substrate. Broth free of cells was used in order to investigate the best strategies to recovery and purification produced by this system. Between the studied acids (HCl and H2SO4) for the acid precipitation step, HCl was the best one as has been showed by the experimental design 24. Extraction has been carried out using petroleum ether and quantification has been done using the thioglycolic acid method. Adsorption studies were carried out with activated carbon in a batch mode using a 24 experimental design as well as combined with an hydrophobic resin Streamline Phenyl aiming to separate the produced biosurfactant. Biosurfactant partial identification was carried out using High Performance Liquid Chromatography (HPLC). Experiments in batch mode showed that adsorption has been controlled mainly by pH and temperature. It was observed a reduction of 41.4% for the liquid phase and the solid phase it was possible to adsorb up to 15 mg of rhamnolipd/g of activated carbon. The kinetics of adsorption has been well fitted to a pseudo-first order reaction with velocity constant (k1) of 1.93 x 10-2 min-1. Experiments in packed bed ranging concentration on eluent (acetone) has been shown the highest recovery factor of 98% when pure acetone has been used. The combined effect if using activated carbon with an hydrophobic resin Streamline Phenyl has been shown successful for the rhamnolipids purification. It has been possible to purify a fraction of the crude broth with 98% of purity when the eluted of activated carbon packed bed was used with pure acetone

Mutagenic and cytotoxic effect of planifolin: A naphthopyranone dimer isolated from Paepalanthus planifolius

A naphthopyranone dimer, named planifolin, was isolated from a methylene chloride extract of the capitula of Paepalanthus planifolius Koern. The molecule (C31H26O10) appeared to be made up of two monomeric portions, semi-vioxanthin and paepalantine (an isocoumarin), linked by an ether bond, and it may possess several kinds of biological activity that can be related to its polyphenolic structure. Short-term tests that detect genetic damage can afford the information needed to evaluate carcinogenic risks of chemicals to humans. The Ames test, recommended for testing the mutagenicity of chemical compounds with potential pharmacological application, was used in the present study. The mutagenic activity was evaluated in Salmonella typhimurium strains TA100, TA98, TA102 and TA97a and the cytotoxic effect in McCoy cells. The in vitro cytotoxicity of planifolin to McCoy cells, tested in microculture with neutral red, showed a significant cytotoxic index (CI50) of 12.83 mu g/mL. Planifolin showed mutagenic activity for TA100, TA98 and TA97a. The results indicate that this new naphthopyranone dimer causes mutations by substitution and by addition and deletion of bases in the sequence of DNA. Moreover, its mutagenic potential was increased by metabolic activation. (c) 2005 Elsevier Ltd. All rights reserved.