Comparison of three concentration methods for the recovery of canine intestinal parasites from stool samples

The aim of present study was to compare the efficiency of a commercial assay and two conventional methods for fecal concentration in detecting canine gastrointestinal parasites. Fecal samples from 254 dogs were processed by centrifugation-sedimentation (CS), centrifugation-flotation (CF) and a commercial assay for fecal concentration (TF-test (R)). The following parasites were detected: Ancylostoma (37.8%), Giardia (16.9%), Toxocara canis (8.7%), Trichuris vulpis (7.1%), Isospora (3.5%), and Sarcocystis (2.7%). The calculated analytical sensitivity indicated that CF was more accurate (P < 0.01) in detecting Ancylostoma, T. canis, T. vulpis and Giardia infections. However, CF showed significantly higher sensitivity only for Ancylostoma, compared to the other two methods. The kappa index value of diagnostic agreement between TF-test and CF was high for T. canis (83%) and moderate for Giardia (72%) and Ancylostoma (63%). The advantages and limitations of each method were assessed for individual diagnosis and epidemiological investigation. (C) 2010 Elsevier B.V. All rights reserved.

Asymptotics for Jacobi-Sobolev orthogonal polynomials associated with non-coherent pairs of measures

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Some asymptotics for Sobolev orthogonal polynomials involving Gegenbauer weights

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Short-wave instabilities in the Benjamin-Bona-Mahoney-Peregrine equation: theory and numerics

In this paper we discuss the nonlinear propagation of waves of short wavelength in dispersive systems. We propose a family of equations that is likely to describe the asymptotic behaviour of a large class of systems. We then restrict our attention to the analysis of the simplest nonlinear short-wave dynamics given by U-0 xi tau, = U-0 - 3(U-0)(2). We integrate numerically this equation for periodic and non-periodic boundary conditions, and we find that short waves may exist only if the amplitude of the initial profile is not too large.

Estimativas de parâmetros genéticos para características de crescimento e produtividade em vacas da raça Canchim, utilizando-se inferência bayesiana

The objective of this study was to estimate genetic parameters for body weights at weaning (PD), 12 months old (P12) and adult age (PAD), culling age (TPR, days in herd), number (ND10) and kilograms (QD10) of calves weaned up to ten years of age, total number (NDT) and total kilograms (QDT) of calves weaned during herd life, and kilograms of calves weaned per year in herd (QTPR) of Canchim (5/8 Charolais + 3/8 Zebu) females from one herd. Data consisted of 3,249, 3.111, 1,138, 1,340, 1,362, 1,362, 1,340, 1,340 and 1,340 records of PD, P12, PAD, TPR, ND10, QD10, NDT, QDT and QTPR. respectively. Variance and covariance components were estimated by bivariate analyses between PD, P12 and PAD and other production traits using Bayesian inference. The models included the additive direct, permanent environmental and residual random effects and the fixed effects year and month of birth or calving, calving age and age of the animal, depending on the trait. QD10, QDT and QTPR of each female were obtained by adjusting the weaning weights of calves for year and month of birth, sex and age of cow. Average of heritability estimates were 0.38 (PD), 0.40 (P12), 0.54 (PAD), 0.22 (TPR), 0.22 (ND10), 0.24 (QD10), 0.23 (NDT), 0.23 (QDT) and 0.32 (QTPR), indicating genetic variability to obtain response by selection. Genetic correlations between TPR (-0.02, 0.26 and -0.12), ND10 (0.04, 0.10 and -0.29), QD10 (0.37, 0.39 and -0.13), NDT (-0.03, 0.14 and -0.25), QDT (0.20, 0.33 and -0.16), QTPR (0.21, 0.28 and -0.19) and body weights (PD, P12 and PAD) suggest that selection of females based on weaning and 12-month body weights will not affect productivity. However, it may be decreased by increasing female adult body weight.

H2 and/or H∞-norm model reduction of uncertain discrete-time systems

This paper addresses the problem of model reduction for uncertain discrete-time systems with convex bounded (polytope type) uncertainty. A reduced order precisely known model is obtained in such a way that the H2 and/or the H∞ guaranteed norm of the error between the original (uncertain) system and the reduced one is minimized. The optimization problems are formulated in terms of coupled (non-convex) LMIs - Linear Matrix Inequalities, being solved through iterative algorithms. Examples illustrate the results.

Constraints implementation for IQML and mode direction-of-arrival estimators

The iterative quadratic maximum likelihood IQML and the method of direction estimation MODE are well known high resolution direction-of-arrival DOA estimation methods. Their solutions lead to an optimization problem with constraints. The usual linear constraint presents a poor performance for certain DOA values. This work proposes a new linear constraint applicable to both DOA methods and compare their performance with two others: unit norm and usual linear constraint. It is shown that the proposed alternative performs better than others constraints. The resulting computational complexity is also investigated.

Identification of synchronous machine parameters using load rejection test data

This work shows a computational methodology for the determination of synchronous machines parameters using load rejection test data. By machine modeling one can obtain the quadrature parameters through a load rejection under an arbitrary reference, reducing the present difficulties. The proposed method is applied to a real machine.

A constructive heuristic algorithm to Short Term Transmission Network Expansion Planning

In this paper a method for solving the Short Term Transmission Network Expansion Planning (STTNEP) problem is presented. The STTNEP is a very complex mixed integer nonlinear programming problem that presents a combinatorial explosion in the search space. In this work we present a constructive heuristic algorithm to find a solution of the STTNEP of excellent quality. In each step of the algorithm a sensitivity index is used to add a circuit (transmission line or transformer) to the system. This sensitivity index is obtained solving the STTNEP problem considering as a continuous variable the number of circuits to be added (relaxed problem). The relaxed problem is a large and complex nonlinear programming and was solved through an interior points method that uses a combination of the multiple predictor corrector and multiple centrality corrections methods, both belonging to the family of higher order interior points method (HOIPM). Tests were carried out using a modified Carver system and the results presented show the good performance of both the constructive heuristic algorithm to solve the STTNEP problem and the HOIPM used in each step.

Stability analysis of power system including facts (TCSC) effects by direct method approach

The problem of power system stability including the effects of a flexible alternating current transmission system (FACTS) is approached. First, the controlled series compensation is considered in the machine against infinite bar system and its effects are taken into account by means of construction of a Lyapunov function (LF). This simple system is helpful in order to understand the form the device affects dynamic and transient performance of the power system. After, the multimachine case is considered and it is shown that the single-machine results apply to multimachine systems. An energy-form Lyapunov function is derived for the power system including the FACTS device and it is used to analyse damping and synchronizing effects due to the FACTS device in single-machine as well as in multimachine power systems. © 2005 Elsevier Ltd. All rights reserved.

Micromechanics of dentin/adhesive interface in function of dentin depth: 3d finite element analysis

Objectives: The aim of this study was to analyze the stress distribution on dentin/adhesive interface (d/a) through a 3-D finite element analysis (FEA) varying the number and diameter of the dentin tubules orifice according to dentin depth, keeping hybrid layer (HL) thickness and TAǴs length constant. Materials and Methods: 3 models were built through the SolidWorks software: SD - specimen simulating superficial dentin (41 x 41 x 82 μm), with a 3 μm thick HL, a 17 μm length Tag, and 8 tubules with a 0.9 μm diameter restored with composite resin. MD - similar to M1 with 12 tubules with a 1.2 μm diameter, simulating medium dentin. DD - similar to M1 with 16 tubules with a 2.5 μm diameter, simulating deep dentin. Other two models were built in order to keep the diameter constant in 2.5 μm: MS - similar to SD with 8 tubules; and MM - similar to MD with 12 tubules. The boundary condition was applied to the base surface of each specimen. Tensile load (0.03N) was performed on the composite resin top surface. Stress field (maximum principal stress in tension - σMAX) was performed using Ansys Wokbench 10.0. Results: The peak of σMAX (MPa) were similar between SD (110) and MD (106), and higher for DD (134). The stress distribution pathway was similar for all models, starting from peritubular dentin to adhesive layer, intertubular dentin and hybrid layer. The peak of σMAX (MPa) for those structures was, respectively: 134 (DD), 56.9 (SD), 45.5 (DD), and 36.7 (MD). Conclusions: The number of dentin tubules had no influence in the σMAX at the dentin/adhesive interface. Peritubular and intertubular dentin showed higher stress with the bigger dentin tubules orifice condition. The σMAX in the hybrid layer and adhesive layer were going down from superficial dentin to deeper dentin. In a failure scenario, the hybrid layer in contact with peritubular dentin and adhesive layer is the first region for breaking the adhesion. © 2011 Nova Science Publishers, Inc.

On a control design to an AFM microcantilever beam, operating in a tapping-mode, with irregular behavior

In last decades, control of nonlinear dynamic systems became an important and interesting problem studied by many authors, what results the appearance of lots of works about this subject in the scientific literature. In this paper, an Atomic Force Microscope micro cantilever operating in tapping mode was modeled, and its behavior was studied using bifurcation diagrams, phase portraits, time history, Poincare maps and Lyapunov exponents. Chaos was detected in an interval of time; those phenomena undermine the achievement of accurate images by the sample surface. In the mathematical model, periodic and chaotic motion was obtained by changing parameters. To control the chaotic behavior of the system were implemented two control techniques. The SDRE control (State Dependent Riccati Equation) and Time-delayed feedback control. Simulation results show the feasibility of the bothmethods, for chaos control of an AFM system. Copyright © 2011 by ASME.

Análise comparativa da distribuição de tensões em incisivo central superior, restaurado com diferentes sistemas de pinos intra-radiculares

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento assintótico dos polinômios ortogonais de Sobolev-Jacobi e Sobolev-Laguerre

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

História do ensino primário rural em São Paulo e Santa Catarina (1921-1952): uma abordagem comparada

Pós-graduação em Educação Escolar - FCLAR