PÊNDULO ANCORADO EM MINI-IMPLANTES: AVALIAÇÃO DENTÁRIA E ESQUELÉTICA

O aparelho Pêndulo é eficaz na correção das más oclusões de Classe II, com comprometimento dentoalveolar superior. No entanto, a perda de ancoragem caracterizada pela mesialização dos pré-molares superiores, e pela vestibularização e protrusão dos incisivos superiores, constitui um grave efeito colateral deste dispositivo. O objetivo deste estudo foi avaliar as possíveis alterações dentárias e esquelética, sagitais e verticais, decorrentes do uso do Pêndulo modificado, ancorado em mini-implantes. Dez indivíduos foram tratados neste estudo, sendo que telerradiografias em norma lateral foram realizadas no início do tratamento, e imediatamente após a remoção do Pêndulo. Em cada indivíduo foram instalados dois mini-implantes no palato, que receberam carga imediata por meio da ativação do Pêndulo modificado, apoiado nestes dispositivos de ancoragem temporária. Nenhum dos dentes avaliados apresentou alterações verticais estatisticamente significantes; o mesmo ocorreu para as alterações esqueléticas verticais e sagitais, e para o trespasse vertical e horizontal. Com relação às alterações estatisticamente significantes, o primeiro molar superior moveu-se para distal aproximadamente 5,6mm em 6,2 meses, e com inclinação distal média de 7,100. Os segundos pré-molares superiores distalizaram em média 2,7mm e inclinaram 5,550; já os segundos molares superiores moveram-se em média 4,6mm para distal com uma inclinação de 13,700; valores estes também considerados estatisticamente significantes. O sistema de distalização de molares superiores, composto pelo Pêndulo modificado ancorado em mini-implantes, mostrou-se eficaz na correção da má oclusão de Classe II, sem produzir os efeitos de perda de ancoragem. (AU)

PÊNDULO ANCORADO EM MINI-IMPLANTES - ANÁLISE EM MODELOS DIGITAIS

A distalização dos molares superiores é uma opção de tratamento da má oclusão de Classe II, quando o envolvimento é principalmente dentoalveolar. Dispositivos intrabucais como o aparelho Pêndulo, dispensam a colaboração do paciente quanto ao uso, porém promovem efeitos muitas vezes indesejáveis como a vestibularização dos dentes anteriores que participam na ancoragem e a inclinação dos molares distalizados. Após o surgimento dos Dispositivos de Ancoragem Temporária (DATs), como o mini-implante pode-se alcançar a ancoragem de forma previsível e eficiente. Com isto, por meio de um estudo prospectivo, foram avaliadas as alterações dentárias, promovidas pela distalização de molares superiores com um aparelho Pêndulo modificado, apoiado em dois mini-implantes instalados no palato de 10 indivíduos, sendo 2 do sexo feminino e 8 do masculino, com média de idade de 14,3 anos. A amostra foi composta por 20 modelos digitalizados em 3D, obtidos de em duas fases: no início do tratamento (T1) e após distalização com sobrecorreção de 1 mm (T2), permitindo quantificar as alterações dentárias sagitais, transversais e possíveis movimentos de rotação, angulação e movimentos verticais. Os resultados obtidos mostraram que no sentido sagital, houve uma efetiva distalização com significância estatística, para os segundos molares superiores; primeiros molares superiores em média de 4,34 mm e 3,91mm para o lado direito e esquerdo, respectivamente, e para os segundos pré-molares do lado direito e esquerdo de 2,06 mm e 1,95 mm, respectivamente. Porém, para os dentes anteriores, foi constatada a perda de ancoragem. No sentido transversal, o maior aumento ocorreu na região dos dentes posteriores. Os movimentos de rotação, angulação e vertical dos primeiros molares superiores, indicam que houve rotação mesiovestibular e inclinação distal das coroas destes dentes de ambos os lados; as medidas verticais, demonstram que houve movimento significativo apenas para o primeiro molar direito, com inclinação distal pela intrusão da cúspide distal. Este dispositivo mostrou-se eficaz na correção da Classe II em um tempo médio de 6,2 meses.(AU)

Cellular responses to potential biomaterials

The aim of this study was to systematically investigate the factors considered to be responsible for anchorage-dependent cell behaviour to determine which, if any, of these factors exerts greater influence. An efficient means of doing so is the in vitro fibroblast cell culture model. The interaction of fibroblasts with novel substrata gives information about how a biological system reacts to a foreign material. The may ultimately lead to the development of improved biomaterials. This interdisciplinary study combines the elements of surface characterisation and biological testing to determine the nature of the biomaterial/host interface. Polarity and surface charge were found to have an important influence on fibroblast adhesion to hydrogel polymers, by virtue of their water-structuring effects. The same factors were found to affect cell adhesion on undegraded PHB-HV copolymers and their blends with polysaccharides. On degraded PHB-HV copolymers, the degradation process itself played the greatest role in influencing cell response. Increasing surface charge and mechanical instability in these polymers inhibited cell adhesion. Based on the observations of hydrogels and PHB-copolymers a novel material, gel-spun PHB was designed for use as a wound scaffold. In vitro tests using human and mammalian fibroblasts accentuated the importance of polarity and surface charge in determining cellular response. The overall view of cellular behaviour on a broad spectrum of materials highlighted the effects that polarity and surface charge have on water-structuring, and how this affects interfacial conversion. In degradable systems, mechanical stability also plays an inportant role in determining anchorage-dependent cell behaviour.

Novel hydrogel polymers

Hydrogels may be conveniently described as hydrophilic polymers that are swollen by, but do not dissolve in water. In this work a series of copolymer hydrogels and semi-interpenetrating polymer networks based on the monomers 2-hydroxyethyl methacrylate, N-vinyl pyrrolidone and N'N' dimethyl acrylamide, together with some less hydrophilic hydroxyalkyl acrylates and methacrylates have been synthesised. Variations in structure and composition have been correlated both with the total equilibrium water content of the resultant hydrogel and with the more detailed water binding behaviour, as revealed by differential scanning calorimetry studies. The water binding characteristics of the hydrogels were found to be primarily a function of the water structuring groups present in gel. The water binding abilities of these groups were, however, modified by steric effects. The mechanical properties of the hydrogels were also investigated. These were found to be dependent on both the polymer composition and the amount and nature of the water present in the gels. In biological systems, composite formation provides a means of producing strong, high water content materials. As an analogy with these systems hydrogel composites were prepared. In an initial study of these materials the water binding and mechanical properties of semi-interpenetrating polymer networks of N'N'dimethyl acrylamide with cellulosic type materials, with polyurethanes and with ester containing polymers were examined. A preliminary investigation of surface properties of both the copolymers and semi-interpenetrating polymer networks has been completed, using both contact angle measurements and anchorage dependent fibroblast cells. Measurable differences in surface properties attributable to structural variations in the polymers were detected by droplet techniques in the dehydrated state. However, in the hydrated state these differences were masked by the water in the gels. The use of cells enabled the underlying differences to be probed and the nature of the water structuring group was again found to be the dominant factor.

The strength of column-to-foundation joints in reinforced concrete

This thesis is concerned with the experimental and theoretical investigation into the compression bond of column longitudinal reinforcement in the transference of axial load from a reinforced concrete column to a base. Experimental work includes twelve tests with square twisted bars and twenty four tests with ribbed bars. The effects of bar size, anchorage length in the base, plan area of the base, provision of bae tensile reinforcement, links around the column bars in the base, plan area of column and concrete compressive strength were investigated in the tests. The tests indicated that the strength of the compression anchorage of deformed reinforcing steel in the concrete was primarily dependent on the concrete strength and the resistance to bursting, which may be available within the anchorage . It was shown in the tests without concreted columns that due to a large containment over the bars in the foundation, failure occurred due to the breakdown of bond followed by the slip of the column bars along the anchorage length. The experimental work showed that the bar size , the stress in the bar, the anchorage length, provision of the transverse steel and the concrete compressive strength significantly affect the bond stress at failure. The ultimate bond stress decreases as the anchorage length is increased, while the ultimate bond stress increases with increasing each of the remainder parameters. Tests with concreted columns also indicated that a section of the column contributed to the bond length in the foundation by acting as an extra anchorage length. The theoretical work is based on the Mindlin equation( 3), an analytical method used in conjunction with finite difference calculus. The theory is used to plot the distribution of bond stress in the elastic and the elastic-plastic stage of behaviour. The theory is also used to plot the load-vertical displacement relationship of the column bars in the anchorage length, and also to determine the theoretical failure load of foundation. The theoretical solutions are in good agreement with the experimental results and the distribution of bond stress is shown to be significantly influenced by the bar stiffness factor K. A comparison of the experimental results with the current codes shows that the bond stresses currently used are low and in particular, CPIlO(56) specifies very conservative design bond stresses .

Insulin release from cultured B-cells

Established RlNm5F and lN111 R1 and newly available HlT-T15 and UMR 407/3 B-cell lines have been successfully maintained in vitro. With the exclusion of UMR 407/3 cells, all lines were continuously propagable. Doubling times and plating efficiencies for HlT-T15, RlNm5F, lN111 R1 and UMR 407/3 cells were 20 hours and 85%, 31 hours and 76%, 24 hours and 80% and 38 hours and 94% respectively. All the cell lines were anchorage dependent, but only UMR 407/3 cells grew to confluence. Only HlT-T15 and UMR 407/3 cells produced a true insulin response to glucose but glucose markedly increased the rate of D-[U14C]glucose oxidation by all the cell lines. Glucose induced insulin release from HlT-T15 cells was biphasic with an exaggerated first phase. Insulin release from HlT-T15, RlNm5F and IN111 R1 cells was stimulated by amino acids and sulphonylureas. Glucagon stimulated insulin release from HlT-T15 and RlNm5F cells while somatostatin and pancreatic polypeptide inhibited release. These observations suggest that net insulin release from the whole islet may be the result of significant paracrine interaction. HlT-T15 and RlNm5F cell insulin release was stimulated by forskolin and inhibited by imidazole. Ca2+ channel blockade and calmodulin inhibition suppressed insulin release from HlT-T15, RlNm5F and IN111 R1 cells. In addition phorbol esters stimulated insulin release from RlNm5F cells. These data implicate cAMP, Ca2+ and protein kinase-C in the regulation of insulin release from cultured B-cells. Acetylcholine increased insulin release from HlT-T15 and RlNm5F cells. Inhibition of the response by atropine confirmed the involvement of muscarinic receptors. HlT-T15 cell insulin release was also inhibited by adrenaline. These observations suggest a possible role for the autonomic nervous system in the modulation of insulin release. Preliminary studies with a human insulinoma maintained in monolayer culture have demonstrated a limited life span of some seven weeks, a continuous low level of insulin release but no insulin response to glucose challenge.

Biological interactions with synthetic polymers

Anchorage dependent cell culture is a useful model for investigating the interface that becomes established when a synthetic polymer is placed in contact with a biological system. The primary aim of this interdisciplinary study was to systematically investigate a number of properties that were already considered to have an influence on cell behaviour and thereby establish the extent of their importance. It is envisaged that investigations such as these will not only further the understanding of the mechanisms that affect cell adhesion but may ultimately lead to the development of improved biomaterials. In this study, surface analysis of materials was carried out in parallel with culture studies using fibroblast cells. Polarity, in it's ability to undergo hydrogen bonding (eg with water and proteins), had an important affect on cell behaviour, although structural arrangement and crystallinity were not found to exert any marked influence. In addition, the extent of oxidation that had occurred during the process of manufacture of substrates was also important. The treatment of polystyrene with a selected series of acids and gas plasmas confirmed the importance of polarity, structural groups and surface charge and it was shown that this polymer was not unique among `hydrophobic' materials in it's inability to support cell adhesion. The individual water structuring groups within hydrogel polymers were also observed to have controlling effects on cell behaviour. An overall view of the biological response to both hydrogel and non-hydrogel materials highlighted the importance of surface oxidation, polarity, water structuring groups and surface charge. Initial steps were also taken to analyse foetal calf serum, which is widely used to supplement cell culture media. Using an array of analytical techniques, further experiments were carried out to observe any possible differences in the amounts of lipids and calcium that become deposited to tissue culture and bacteriological grade plastic under cell culture conditions.

Do ‘passive’ medical titanium surfaces deteriorate in service in the absence of wear?

Globally, more than 1000 tonnes of titanium (Ti) is implanted into patients in the form of biomedical devices on an annual basis. Ti is perceived to be ‘biocompatible’ owing to the presence of a robust passive oxide film (approx. 4 nm thick) at the metal surface. However, surface deterioration can lead to the release of Ti ions, and particles can arise as the result of wear and/or corrosion processes. This surface deterioration can result in peri-implant inflammation, leading to the premature loss of the implanted device or the requirement for surgical revision. Soft tissues surrounding commercially pure cranial anchorage devices (bone-anchored hearing aid) were investigated using synchrotron X-ray micro-fluorescence spectroscopy and X-ray absorption near edge structure. Here, we present the first experimental evidence that minimal load-bearing Ti implants, which are not subjected to macroscopic wear processes, can release Ti debris into the surrounding soft tissue. As such debris has been shown to be pro-inflammatory, we propose that such distributions of Ti are likely to effect to the service life of the device.

Systematic microcarrier screening and agitated culture conditions improves human mesenchymal stem cell yield in bioreactors

Production of human mesenchymal stem cells for allogeneic cell therapies requires scalable, cost-effective manufacturing processes. Microcarriers enable the culture of anchorage-dependent cells in stirred-tank bioreactors. However, no robust, transferable methodology for microcarrier selection exists, with studies providing little or no reason explaining why a microcarrier was employed. We systematically evaluated 13 microcarriers for human bone marrow-derived MSC (hBM-MSCs) expansion from three donors to establish a reproducible and transferable methodology for microcarrier selection. Monolayer studies demonstrated input cell line variability with respect to growth kinetics and metabolite flux. HBM-MSC1 underwent more cumulative population doublings over three passages in comparison to hBM-MSC2 and hBM-MSC3. In 100 mL spinner flasks, agitated conditions were significantly better than static conditions, irrespective of donor, and relative microcarrier performance was identical where the same microcarriers outperformed others with respect to growth kinetics and metabolite flux. Relative growth kinetics between donor cells on the microcarriers were the same as the monolayer study. Plastic microcarriers were selected as the optimal microcarrier for hBM-MSC expansion. HBM-MSCs were successfully harvested and characterised, demonstrating hBM-MSC immunophenotype and differentiation capacity. This approach provides a systematic method for microcarrier selection, and the findings identify potentially significant bioprocessing implications for microcarrier-based allogeneic cell therapy manufacture. Large-scale production of human bone-marrow derived mesenchymal stem cells (hBM-MSCs) requires expansion on microcarriers in agitated systems. This study demonstrates the importance of microcarrier selection and presents a systematic methodology for selection of an optimal microcarrier. The study also highlights the impact of an agitated culture environment in comparison to a static system, resulting in a significantly higher hBM-MSC yield under agitated conditions.

Food customs of rural and urban Inupiaq elders and their relationships to select nutrition parameters, food insecurity, health, and physical and mental functioning

The Inupiaq Tribe resides north of the Arctic Circle in northwestern Alaska. The people are characterized by their continued dependence on harvested fish, game and plants, known as a subsistence lifestyle (Lee 2000:35-45). Many are suggesting that they leave their historical home and move to urban communities, places believed to be more comfortable as they age. Tribal Elders disagree and have stated, "Elders need to be near the river where they were raised" (Branch 2005:1). The research questions focused on differences that location had on four groups of variables: nutrition parameters, community support, physical functioning and health. A total of 101 Inupiaq Elders ≥ 50 years were surveyed: 52 from two rural villages, and 49 in Anchorage. Location did not influence energy intake or intake of protein; levels of nutrition risk and food insecurity; all had similar rates between the two groups. Both rural and urban Elders reported few limitations of ADLs and IADLs. Self-reported general health scores (SF-12.v2 GH) were also similar by location. Differences were found with rural Elders reporting higher physical functioning summary scores (SF-12.v2 PCS), higher mental health scores (SF-12.v2 MH), higher vitality and less pain even though the rural mean ages were five years older than the urban Elders. Traditional food customs appear to support the overall health and well being of the rural Inupiaq Elders as demonstrated by higher intakes of Native foods, stronger food sharing networks and higher family activity scores than did urban Elders. The rural community appeared to foster continued physical activity. It has been said that when Elders are in the rural setting they are near "people they know" and it is a place "where they can get their Native food" (NRC 2005). These factors appear to be important as Inupiaq Elders age, as rural Inupiaq Elders fared as well or better than Inupiaq Elders in terms of diet, mental and physical health.

The role of redox signaling in the molecular mechanism of tamoxifen resistance in breast cancer.

The emergence of tamoxifen or aromatase inhibitor resistance is a major problem in the treatment of breast cancer. The molecular signaling mechanism of antiestrogen resistance is not clear. Understanding the mechanisms by which resistance to these agents arise could have major clinical implications for preventing or circumventing it. Therefore, in this dissertation we have investigated the molecular mechanisms underlying antiestrogen resistance by studying the contributions of reactive oxygen species (ROS)-induced redox signaling pathways in antiestrogen resistant breast cancer cells. Our hypothesis is that the conversion of breast tumors to a tamoxifen-resistant phenotype is associated with a progressive shift towards a pro-oxidant environment of cells as a result of oxidative stress. The hypothesis of this dissertation was tested in an in vitro 2-D cell culture model employing state of the art biochemical and molecular techniques, including gene overexpression, immunoprecipitation, Western blotting, confocal imaging, ChIP, Real-Time RT-PCR, and anchorage-independent cell growth assays. We observed that tamoxifen (TAM) acts like both an oxidant and an antioxidant. Exposure of tamoxifen resistant LCC2 cell to TAM or 17 beta-estradiol (E2) induced the formation of reactive oxidant species (ROS). The formation of E2-induced ROS was inhibited by co-treatment with TAM, similar to cells pretreated with antioxidants. In LCC2 cells, treatments with either E2 or TAM were capable of inducing cell proliferation which was then inhibited by biological and chemical antioxidants. Exposure of LCC2 cells to tamoxifen resulted in a decrease in p27 expression. The LCC2 cells exposed to TAM showed an increase in p27 phosphorylation on T157 and T187. Conversely, antioxidant treatment showed an increase in p27 expression and a decrease in p27 phosphorylation on T157 and T187 in TAM exposed cells which were similar to the effects of Fulvestrant. In line with previous studies, we showed an increase in the binding of cyclin E-Cdk2 and in the level of p27 in TAM exposed cells that overexpressed biological antioxidants. Together these findings highly suggest that lowering the oxidant state of antiestrogen resistant LCC2 cells, increases LCC2 susceptibility to tamoxifen via the cyclin dependent kinase inhibitor p27.

Development of thresholds for surface preparation in repair systems with wet lay -up fiber reinforced polymers

Bonded repair of concrete structures with fiber reinforced polymer (FRP) systems is increasingly being accepted as a cost-efficient and structurally viable method of rapid rehabilitation of concrete structures. However, the relationships between long-term performance attributes, service-life, and details of the installation process are not easy to quantify. Accordingly, there is currently a lack of generally accepted construction specifications, making it difficult for the field engineer to certify the adequacy of the construction process. ^ The objective of the present study, as part of the National Cooperative Highway Research Program (NCHRP) Project 10-59B, was to investigate the effect of surface preparation on the behavior of wet lay-up FRP repair systems and consequently develop rational thresholds that provide sufficient performance. ^ The research program was comprised of both experimental and analytical work for wet lay-up FRP applications. The experimental work included flexure testing of sixty-seven (67) reinforced concrete beams and bond testing of ten (10) reinforced concrete blocks. Four different parameters were studied: surface roughness, surface flatness, surface voids and bug holes, and surface cracks/cuts. The findings were analyzed from various aspects and compared with the data available in the literature. As part of the analytical work, finite element models of the flexural specimens with surface flaws were developed using ANSYS. The purpose of this part was to extend the parametric study on the effects of concrete surface flaws and verify the experimental results based on nonlinear finite element analysis. ^ Test results showed that surface roughness does not appear to have a significant influence on the overall performance of the wet lay-up FRP systems with or without adequate anchorage, and whether failure was by debonding or rupture of FRP. Both experimental and analytical results for surface flatness proved that peaks on concrete surface, in the range studied, do not have a significant effect on the performance of wet lay-up FRP systems. However, valleys of particular size could reduce the strength of wet lay-up FRP systems. Test results regarding surface voids and surface cracks/cuts revealed that previously suggested thresholds for these flaws appear to be conservative, as also confirmed by analytical study. ^

Anclaje, dinámicas e impactos territoriales de la cadena global de cítricos dulces en el nordeste argentino

El artículo analiza firmas insertas en circuitos globalizados de exportación de frutas frescas, así como la interfase empresas-territorios. Se focaliza en la producción argentina de cítricos dulces y particularmente en un espacio productivo, y se interesa por cómo se traduce la construcción de los circuitos globales en los espacios y actores locales. Para ello, desarrolla una tipología de empresas e indicadores de anclaje y recurre a una combinación de fuentes cuantitativas y cualitativas, con vistas a desentrañar la “caja negra” del comportamiento empresarial. Se concluye que existen diferentes grados de anclaje territorial y combinaciones variables de fijación y movilidad por parte de las empresas. La adopción de una modalidad de agricultura empresarial multilocalizada, orientada al aprovechamiento de las peculiaridades de los diferentes ambientes locales, conduce a la desarticulación de espacios en función de sus características productivas y de sus diversos contextos sociales e institucionales. De esta forma se promueve la conformación de agentes de características flexibles, transformando su reproducción en contingente.

Content and methodology of predoctoral Geriatric Dentistry teaching in Europe

Objectives: To explore the content and methodology of predoctoral Geriatric Dentistry teaching amongst European dental schools.
Methods: The study was conducted by the European College of Gerodontology (ECG) Education Committee. Αn electronic questionnaire has been developed with close and open-ended items, including information on the prevalence and institutional anchorage of Gerodontology programs, the educators, the content and the methodology of teaching. An electronic mail, including a hyperlink to the questionnaire, was sent to 216 dental schools in 39 European countries (Winter/ Spring 2016). The Deans were asked to either answer themselves, or forward the link to faculty members with knowledge on Gerodontology teaching at their respective schools. Repeated reminders or telephone calls were used for non-respondents and personal networks were exploited to identify potential contact persons.
Results: Until August 2016, 121 dental schools from 29 countries responded to the survey (response rate 56%, EU response rate: 60%). Gerodontology was included in the predoctoral curricula of 86% of the respondents and was compulsory in 68%. The course was mainly offered in senior students and was interdisciplinary in 30% of the schools, delivered mainly by dentists (79%), physicians (21%), psychologists (10%), and nurses (5%). It was conducted as an independent lecture series in 40% of the schools and a course director was assigned in 44% of the respondents. When embedded in other disciplines, these were mainly Prosthodontics (31%). The content included a large number of items, such as epidemiology of oral health, medical problems in old age, prosthodontic management, xerostomia, and caries risk assessment. Lectures were the most common teaching format (69%), followed by small group seminars (27%). The most common types of educational material used were scientific articles (48%), printed textbooks (44%), lecture notes (40%) and e-learning material (21%). Clinical training was offered by 64% of the respondents, within the dental school clinics (49%) and/or in outreach locations (40%).
Conclusion: Amongst the respondent European dental schools (66%) there is an increasing number that teach Gerodontology at a pre-doctoral level with significant variations in content and methodology. Official guidelines and the dissemination of the ECG pre-doctoral curriculum guidelines might help to increase the prevalence and improve the status of Gerodontology teaching in Europe.

The Democratic Dynamics of Government Consultations. Speaking Freely and Listening Properly

There is a growing use of consultation and e-consultation procedures by governments. This chapter seeks to examine the role of consultation as part of a new technology of government. Consultation on policy development can reinvigorate democratic engage- ment but often it can silence views through a sort of participatory disempowerment; it can loosen the democratic anchorage of the public service within the state. The chapter develops a governmentality perspective interrogating what participation, democratic engagement and free speech mean in this context, and how ideas of publicness are constructed, managed and controlled. The focus is on the nature of consultation, its relationship to ideas of free speech and speaking freely, and its potential to empower subaltern counterpublics which can formulate oppositional interpretations and urge alternative conclusions. The aim is to develop an idea of the democratic adequacy of the consultation process and draw out a sense of how democratic engagement here can be structured – for good or ill.