Strain Regularity and Stiffness Tensor of Reinforcers in Dense Particle Reinforced Composites

针对高体积份数、随机分布、等轴状颗粒增强复合材料 ,研究了材料的应变分布规律 ,给出了基体和增强体应变平均值与材料微观结构参数之间的定量关系。结果表明 ,除应变平均值外 ,应变涨落是影响刚度张量的另一个重要因素 ,研究了应变涨落与材料微观结构参数之间的关系 ,并推导出了复合材料的刚度张量。与实验结果和以往的理论比较 ,预测结果与实验结果吻合良好

Bronze and iron weapons from Luristan

The 30,000 km2 province of Luristan is situated in western Iran and encompasses the upper valleys of the Zagros Mountains. Even today, local tribesmen inhabit Luristan with their settlement patterns similar to ancient times. Several scientific excavations in the Luristan region have uncovered evidence that this particular region was a major attraction for human settlements from the Paleolithic era onwards. In Ancient Iran, the existence of rich mines together with discoveries made by innovative and inventive artisans spurred the growth of the metalworking culture as an art and a skill among early human communities in Ancient Iran. The art of Luristan can be described as the art of nomadic herdsmen and horsemen with an emphasis on the crafting of small, easily portable objects, among these a number of bronze daggers, swords and other weapons. Throughout its history, Luristan was never an ethnic or political entity because Luristan has been occupied by various tribes and races, throughout its history. Next to Elamites, other tribes who inhabited Luristan were the Hurrians, Lullubians, Kutians, and Kassites. As local tribesmen of Luristan were illiterate, information about their history can only be partially reconstructed from the literature of their southern neighbors: the Elamites and Babylonians. Luristan smiths made weapons for both civilizations. The region was later invaded by Assyrians and finally the Iranians settled the area and absorbed the local tribes. Following an accidental find by the local inhabitants in Luristan in 1928 CE, a number of unlawful diggings reveal a number of metal objects made of bronze and iron that showed a high level of craftsmanship. These objects were offered for sale on the art market with fancy names to hide their origin. The subsequent scientific excavations several decades after the initial discovery provided fascinating information about the culture of Luristan. The metalworking art of Luristan spans a time period from the third millennium BC to the Iron Age. The artifacts from Luristan seem to possess many unique and distinctive qualities, and are especially noteworthy for the apparently endless, intricate diversity and detail that they characteristically depict. The bronze artifacts found in or attributed to Luristan can be each be classed under five separate heads: a) arms and armor, including swords, dirks, daggers, axes, mace heads, spearheads, shields, quiver plaques, protective bronze girdles, helmets; b) implements related to horsemanship, including decorative or ornamental objects for horses as well as bits and snaffles; c) items for personal adornment and hygiene, including anklets, bangles, bracelets, finger rings, earrings and tweezers; d) ceremonial and ritual objects, including talismans, idols, pins, anthropomorphic and zoomorphic figurines; and e) utilitarian objects comprising various vessels and tools, including beakers, bowls and jugs. The scope of this article is limited to a discussion of the bronze and iron weapons made in Luristan. The techniques used for making bronze weapons in Luristan included: casting with open molds, casting with close molds, and casting with lost wax process. For metal sheets used for quiver plaques and bronze protective belts, the hammering technique was used. Edged weapons made in Luristan can be classified into: a) daggers, dirks, and swords with tangs; b) daggers, dirks, and swords with flanges; and c) daggers, dirks, and swords with cast-on hilts. Next to bronze, iron was also used for making weapons such as the characteristic weapon from this area, the iron mask sword.

An Electrowetting Model For Rough Surfaces Under Low Voltage

Electrowetting is one of the most effective methods to enhance wettability. A significant change of contact angle for the liquid droplet can result from the surface microstructures and the external electric field, without altering the chemical composition of the system. During the electrowetting process on a rough surface, the droplet exhibits a sharp transition from the Cassie-Baxter to the Wenzel regime at a low critical voltage. In this paper, a theoretical model for electrowetting is put forth to describe the dynamic electrical control of the wetting behavior at the low voltage, considering the surface topography. The theoretical results are found to be in good agreement with the existing experimental results. (c) Koninklijke Brill NV, Leiden, 2008.

Entre los despojos del peronismo. Esplendor y ocaso del Instituto de Filología de la Universidad de Buenos Aires (1927-1946)

Entre 1927 y 1946, el Instituto de Filología de la Universidad de Buenos Aires atravesó su época de esplendor, bajo la dirección del español Amado Alonso. En menos de veinte años, Alonso le confirió a su instituto no sólo una fuerte presencia en la cultura argentina, sino además un importante prestigio internacional. El Instituto se había hecho de un lugar reconocido en la cultura argentina; había sabido captar la atención de un nutrido grupo de discípulos; había comenzado a publicar sus propias colecciones de libros; se había puesto en contacto con la vasta gama que ofrecía la industria cultural argentina del período. Este fuerte arraigo en la Argentina le permitió alcanzar un alto puesto en la cultura hispanoamericana de su tiempo. Pero con la llegada del peronismo al poder el Instituto se vio sometido a fuertes presiones que llevaron a su virtual desmantelamiento.

壁面非平衡复相催化反应及其对传热的影响

在理想吸附层假定下对两种常见的复相崔化反应模型导出了反应速率表达式,分析了反应级数的变化规律和范围。采用新定义的“壁面催化非平衡系数”作为表征壁面非平衡催化工况的准则参数,用粘性激波层法计算分析了壁面非平衡催化效应对驻点区壁面热流的影响规律。

Comparación de calidad en la producción de carbón vegetal en la Finca El Plantel, Masaya

La presente investigación tuvo como objetivo comparar la producción de calidad de carbón vegetal entre la fosa de tierra y el horno de ladrillo utilizando Eucalyptus camaldulensis, se seleccionaron árboles con diámetros entre 20-30 cm y mayores de 30 cm. Por cada categoría diamétrica se emplearon cinco árboles para un total de diez individuos, se tumbaron los árboles con la técnica de tala dirigida, con hacha a partir de 30 cm del suelo. Se procedió a medir la longitud de la troza en metros empleando una cinta métrica para la medición del diámetro medio. Se calculó el volumen del fuste limpio utilizando la fórmula de Smalian, posteriormente se trasladó trozas y ramas al sitio de carbonización, se depositaron por clase diamétrica donde se calculó el volumen empleando la fórmula de Huber, para la cubicación de las ramas se empleó el método de metro estéreo. Para la clase diamétrica de 20 a 30 cm se utilizó un volumen de 4.48 m3 y para mayor de 30 cm, 6.55 m3 -. Finalizado el proceso de carbonización se obtuvieron ocho sacos en la fosa de tierra, equivalente a 0.217 m3, en el horno de ladrillo se obtuvieron 18 sacos lo que representa 0.496 m3. . Comparando los estándares de calidad de la FAO, con los obtenidos en este estudio, son aceptables, se concluye que el método de producción de horno de ladrillos usando arboles mayores de 30 cm es el mejor método para la producción de carbón vegetal.

解不可压缩流体力学问题的降阶法——Ⅱ.空间V~h的基函数和误差估计

本文对于一大类数值求解二维Navier-Stokes方程边值问题的有限元格式给出了零散度空间V~h的一组简单基函数,讨论了速度的数值误差对压力的数值解的影响,并提出一个改进算法。

Relatório de atividades 2012

Apresenta o relatório de atividades da Comissão de Direitos Humanos e Minorias, referente ao ano de 2012.

Creep behavior of woven roving grp beam in three-point bending

The creep and relaxation behaviour of laminated glass fibre reinforced plastics (GRP) in three-point bending were studied both experimentally and analytically. Creep and relaxation experiments were carried out on eight types of specimens, consisting of glass fibre fabric reinforced epoxy beams. While the bending deflexion and creep strains were measured in the creep tests, the load and relaxation strain were recorded in the relaxation tests. Marked creep effects were seen in the tests, where the environment temperature was 50°C and the period of the measurement was 60 min. An attempt to predict the creep deflexion and relaxation behaviour was made. The transverse shear effect on creep deflexion was taken into account. The predicted results were compared with experimental ones. They were found to be in reasonable agreement, but the linearization assumption, upon which the relaxation behaviour analysis was based, appears to lead to larger inaccuracies in the results.