Relationship of mating systems and metabolic rate with cycle length of spermatogenesis and sperm production rate in shrews

SUMMARY : The shrews are among the most ancient of living eutherian mammals. They represent an interesting comparative model because of their extreme divergent species. The two shrew subfamilies, Soricinae and Crocidurinae are characterized by fundamental differences concerning their metabolic rates, litter size, period of gestation and different mating pattern. In this study we established and compared the sperm characteristics in four species of different genera of shrews (Sorex araneus, Neomys fodiens, Crocidura russula and Suncus murinus) in the context of the sperm competition hypothesis. The sperm competition concerns the competition between ejaculates of different males for fertilization of ova of a female within a single estrus period. As expected, a greater relative testis size (indicating the importance of polyandry) was associated with a higher number of cauda epididymal spermatozoa, higher level of circulating testosterone and a higher percentage of progressive sperm motility. In addition, we investigated if the basal metabolic rate (BMR) and relative testis size (RTS) may be correlated with the cycle length of spermatogenesis. In this purpose, we determined and compared the cycle length of spermatogenesis in six species of shrews belonging to two subfamilies: Soiricinae (Sorex araneus, Sorex coronatus, Sorex minutus, Neomys fodiens) and Crocidurinae (Crocidura russula, Sunctes murinus). Our results indicate that sperm competition and metabolic rate may act independently or together reducing cycle length of spermatogenesis and thus increase sperm production. We finally investigated this correlation across 32 mammalian species. After testing the data for phylogenetic independence, our results showed that BMR explained only 21 % of the variation, while the RTS explained 44% of the variation of the cycle length of spermatogenesis. The level of the sperm competition, indicated by RTS, is thus to our knowledge the most important factor influencing the speed of spermatogenesis in mammals. RESUME : Les musaraignes sont parmi les plus anciens mammifères vivants. Grâce à leurs extrêmes divergences, ils sont souvent utilisés comme modèles dans des études comparatives. Les deux sous-familles Soricinae et Crocidurinae sont caractérisées par des différences fondamentales, notamment en termes d'intensité du métabolisme, des stratégies de reproduction et du comportement social. Dans la première partie de cette étude, nous avons établi et comparé certaines "caractéristiques des spermatozoïdes chez quatre espèces de musaraignes appartenant à des genres différents (Sorex araneus, Neomys fodiens, Crocidura russula et Suncus murinus). Les résultats ont été interprétés dans le contexte de la théorie de la compétition spermatique, c'est-à-dire la compétition entre le sperme de deux ou plusieurs mâles pour féconder un maximum d'ovules de la même femelle. Cette compétition spermatique peut amener à certaines adaptations biologiques afin de produire plus de sperme. Comme attendu, une grande taille relative des testicules est associée à un nombre élevé de spermatozoïdes, dont la majorité présente une mobilité progressive. Un taux élévé de testostérone a également été observé. De plus, nous avons étudié l'influence du métabolisme basal ainsi que l'intensité de la compétition spermatique sur la durée du cycle de la spermatogenèse. Dans ce but, nous avons déterminé et comparé les durées de la spermatogenèse chez six espèces de musaraignes appartenant à deux sous-familles : Soricinae (Sorex araneus, Sorex coronatus, Sorex minutus, Neomys fodiens) et Crocidurinae (Crocidura russula, Suncus murinus). Les résultats obtenus indiquent que ces deux facteurs (l'intensité du métabolisme basal et de la compétition spermatique) agissent d'une manière dépendante ou indépendante dans le même sens. La conséquence de ces actions est une diminution de la durée de la spermatogenèse entraînant une augmentation de la production de spermatozoïdes. Nous avons finalement étudié ce phénomène dans l'ensemble des mammifères. Après avoir testé l'indépendance phylogénétique, nos résultats montrent que l'intensité de la compétition spermatique indiquée par le RTS est mieux corrélée avec la régulation de la durée de la spermatogenèse qu'avec l'intensité du métabolisme.

Synthesis of Nondestructive Testing Technologies for Geomaterial Applications, May 2005

Current monitoring techniques for determination of compaction of earthwork and asphalt generally involve destructive testing of the materials following placement. Advances in sensor technologies show significant promise for obtaining necessary information through nondestructive and remote techniques. To develop a better understanding of suitable and potential technologies, this study was undertaken to conduct a synthesis review of nondestructive testing technologies and perform preliminary evaluations of selected technologies to better understand their application to testing of geomaterials (soil fill, aggregate base, asphalt, etc.). This research resulted in a synthesis of potential technologies for compaction monitoring with a strong emphasis on moisture sensing. Techniques were reviewed and selectively evaluated for their potential to improve field quality control operations. Activities included an extensive review of commercially available moisture sensors, literature review, and evaluation of selected technologies. The technologies investigated in this study were dielectric, nuclear, near infrared spectroscopy, seismic, electromagnetic induction, and thermal. The primary disadvantage of all the methods is the small sample volume measured. In addition, all the methods possessed some sensitivity to non-moisture factors that affected the accuracy of the results. As the measurement volume increases, local variances are averaged out providing better accuracy. Most dielectric methods with the exception of ground penetrating radar have a very small measurement volume and are highly sensitive to variations in density, porosity, etc.

Splitting statistical potentials into meaningful scoring functions: testing the prediction of near-native structures from decoy conformations

Background: Recent advances on high-throughput technologies have produced a vast amount of protein sequences, while the number of high-resolution structures has seen a limited increase. This has impelled the production of many strategies to built protein structures from its sequence, generating a considerable amount of alternative models. The selection of the closest model to the native conformation has thus become crucial for structure prediction. Several methods have been developed to score protein models by energies, knowledge-based potentials and combination of both.Results: Here, we present and demonstrate a theory to split the knowledge-based potentials in scoring terms biologically meaningful and to combine them in new scores to predict near-native structures. Our strategy allows circumventing the problem of defining the reference state. In this approach we give the proof for a simple and linear application that can be further improved by optimizing the combination of Zscores. Using the simplest composite score () we obtained predictions similar to state-of-the-art methods. Besides, our approach has the advantage of identifying the most relevant terms involved in the stability of the protein structure. Finally, we also use the composite Zscores to assess the conformation of models and to detect local errors.Conclusion: We have introduced a method to split knowledge-based potentials and to solve the problem of defining a reference state. The new scores have detected near-native structures as accurately as state-of-art methods and have been successful to identify wrongly modeled regions of many near-native conformations.

Testing for multicointegration in panel data with common factors

The paper addresses the concept of multicointegration in panel data frame- work. The proposal builds upon the panel data cointegration procedures developed in Pedroni (2004), for which we compute the moments of the parametric statistics. When individuals are either cross-section independent or cross-section dependence can be re- moved by cross-section demeaning, our approach can be applied to the wider framework of mixed I(2) and I(1) stochastic processes analysis. The paper also deals with the issue of cross-section dependence using approximate common factor models. Finite sample performance is investigated through Monte Carlo simulations. Finally, we illustrate the use of the procedure investigating inventories, sales and production relationship for a panel of US industries.

Testing for multicointegration in panel data with common factors

The paper addresses the concept of multicointegration in panel data frame- work. The proposal builds upon the panel data cointegration procedures developed in Pedroni (2004), for which we compute the moments of the parametric statistics. When individuals are either cross-section independent or cross-section dependence can be re- moved by cross-section demeaning, our approach can be applied to the wider framework of mixed I(2) and I(1) stochastic processes analysis. The paper also deals with the issue of cross-section dependence using approximate common factor models. Finite sample performance is investigated through Monte Carlo simulations. Finally, we illustrate the use of the procedure investigating inventories, sales and production relationship for a panel of US industries.

Les natures mortes de Paul Gauguin: une production picturale méconnue

Gauguin's first attempts at still-life painting, around 1875, followed the Dutch tradition, influenced mainly by Manet's palette. But he did take occasional liberties in depicting flowers with more fluid colour and dynamic backgrounds. From 1879 his style shows the influence of the Impressionists: Pissarro in the landscapes and Degas in the composition of his still-lifes. He was also open to the new trends which were developing among artists in Paris and applied them in his paintings, using still-lifes as his main means for testing them. He did not escape the contemporary fascination with Japonism, and even experimented briefly with Pointillism in Still Life with Horse's Head. His stays in Britain between 1886 and 1890 correspond to an extremely rich and innovative period for him, in which still-lifes served for increasing experimentation. "Fête Gloanec" and Three Puppies reflect his preoccupations: rejection of perspective, use of areas of flat colour, and mixed styles. These pictures amount to an aesthetic manifesto; many of them are also imbued with strong symbolism, as in the Portrait of Meyer de Haan, which is a melancholic reflection on the fall of man. In Still-Life with Japanese Print, frail blue flowers seem to come out of the head of the artist-martyr, a pure product of the painter's "restless imagination". Thus Gauguin showed that art is an "abstraction" through a genre which was reputed to lend itself with difficulty to anything other than mimesis. Although he moved away from still-life after 1890, Gauguin is one of the first artists to radically renew its role and the status of still-life at the end of the 19th century, well before the Fauvists and Cubists.

Field Testing of Asphaltic Concrete Mixes, HR-101 and R-183, 1968

The amount of asphalt cement in asphaltic concrete has a definite effect on its durability under adverse conditions. The expansion of the transportation system to more and heavier loads has also made the percentage of asphalt cement in a mix more critical. The laboratory mixer does not duplicate the mixing effect of the large pugmills; therefore, it is impossible to be completely sure of the asphalt cement needed for each mix. This percentage quite often must be varied in the field. With a central testing laboratory and the high production of mixing plants today, a large amount of asphaltic concrete is produced before a sample can be tested to determine if the asphalt content is correct. If the asphalt content lowers the durability or stability of a mix, more maintenance will be required in the future. The purpose of this project is to determine the value of a mobile laboratory in the field, the feasibility of providing adequate, early testing in the field, and correlation with the central laboratory. The major purpose was to determine as soon as possible the best percentage of asphalt.

In vitro activity of gallium maltolate against Staphylococci in logarithmic, stationary, and biofilm growth phases: comparison of conventional and calorimetric susceptibility testing methods.

Ga(3+) is a semimetal element that competes for the iron-binding sites of transporters and enzymes. We investigated the activity of gallium maltolate (GaM), an organic gallium salt with high solubility, against laboratory and clinical strains of methicillin-susceptible Staphylococcus aureus (MSSA), methicillin-resistant S. aureus (MRSA), methicillin-susceptible Staphylococcus epidermidis (MSSE), and methicillin-resistant S. epidermidis (MRSE) in logarithmic or stationary phase and in biofilms. The MICs of GaM were higher for S. aureus (375 to 2000 microg/ml) than S. epidermidis (94 to 200 microg/ml). Minimal biofilm inhibitory concentrations were 3,000 to >or=6,000 microg/ml (S. aureus) and 94 to 3,000 microg/ml (S. epidermidis). In time-kill studies, GaM exhibited a slow and dose-dependent killing, with maximal action at 24 h against S. aureus of 1.9 log(10) CFU/ml (MSSA) and 3.3 log(10) CFU/ml (MRSA) at 3x MIC and 2.9 log(10) CFU/ml (MSSE) and 4.0 log(10) CFU/ml (MRSE) against S. epidermidis at 10x MIC. In calorimetric studies, growth-related heat production was inhibited by GaM at subinhibitory concentrations; and the minimal heat inhibition concentrations were 188 to 4,500 microg/ml (MSSA), 94 to 1,500 microg/ml (MRSA), and 94 to 375 microg/ml (MSSE and MRSE), which correlated well with the MICs. Thus, calorimetry was a fast, accurate, and simple method useful for investigation of antimicrobial activity at subinhibitory concentrations. In conclusion, GaM exhibited activity against staphylococci in different growth phases, including in stationary phase and biofilms, but high concentrations were required. These data support the potential topical use of GaM, including its use for the treatment of wound infections, MRSA decolonization, and coating of implants.

Isothermal microcalorimetry for antifungal susceptibility testing of Mucorales, Fusarium spp., and Scedosporium spp.

We evaluated isothermal microcalorimetry for real-time susceptibility testing of non-Aspergillus molds. MIC and minimal effective concentration (MEC) values of Mucorales (n = 4), Fusarium spp. (n = 4), and Scedosporium spp. (n = 4) were determined by microbroth dilution according to the Clinical Laboratory Standard Institute M38-A2 guidelines. Heat production of molds was measured at 37 °C in Sabouraud dextrose broth inoculated with 2.5 × 10(4) spores/mL in the presence of amphotericin B, voriconazole, posaconazole, caspofungin, and anidulafungin. As determined by microcalorimetry, amphotericin B was the most active agent against Mucorales (MHIC 0.06-0.125 μg/mL) and Fusarium spp. (MHIC 1-4 μg/mL), whereas voriconazole was the most active agent against Scedosporium spp. (MHIC 0.25 to 8 μg/mL). The percentage of agreement (within one 2-fold dilution) between the MHIC and MIC (or MEC) was 67%, 92%, 75%, and 83% for amphotericin B, voriconazole, posaconazole, and caspofungin, respectively. Microcalorimetry provides additional information on timing of antifungal activity, enabling further investigation of drug-mold and drug-drug interaction, and optimization of antifungal treatment.

Optimizing the Testing Process in Module Testing – Functional Testing Interface

Today's business environment has become increasingly unexpected and fast changing because of the global competition. This new environment requires the companies to organize their control differently, e.g. by logistic process thinking. Logistic process thinking in software engineering applies the principles of production process to immaterial products. Processes must be optimized, so that every phase adds value to the customer, and the lead times can be cut shorter to meet the new customer requirements. The purpose of this thesis is to examine and optimize the testing processes of software engineering concentrating on module testing, functional testing and their interface. The concept of logistic process thinking is introduced through production process, value added model and process management. Also theory of testing based on literature is presented, concentrating on module testing and functional testing. The testing processes of the Case Company are presented together with the project models in which they are implemented. The real life practices in module testing and functional testing and their interface are examined through interviews. These practices are analyzed against the processes and the testing theory, through which ideas for optimizing the testing process are introduced. The project world of the Case Company is also introduced together with two example testing projects in different life cycle phases. The examples give a view of how much effort of the project is put in different types of testing.

Transfer pricing tool development process based on valve package production costs

Tämän diplomityön päätavoitteena oli parantaa kehitetyn kustannusperusteisen siirtohinnoittelutyökalun ominaisuuksia osastokohtaisen kustannusarviointiprosessin käyttöön. Työ on vaikeutunut lähimenneisyyden heikosta hintakyselyiden vastauskyvystä. Työn pääongelmana oli kerätä luotettavaa tuotannonohjausjärjestelmän kustannusaineistoa osittain vanhentuneista vakioventtiilien koneistus- ja materiaalitiedosta. Tutkimuksessa käytetyt tärkeimmät tutkimusmenetelmät voidaan jakaa siirtohinnoittelu- ja kustannusarvioprosessien kirjallisuustutkimukseen, kenttäanalyysiin ja nykyisen Microsoft Excel –siirtohinnoittelutyökalun kehittämiseen eri osastojen rajapinnassa. Siirtohinnoittelumenetelmät ovat yleisesti jaettu kustannus-, markkina- ja neuvotteluperusteisiin malleihin, jotka harvoin sellaisenaan kohtaavat siirtohinnoittelulle asetetut tavoitteet. Tämä ratkaisutapa voi johtaa tilanteisiin, jossa kaksi erillistä menetelmää sulautuvat yhteen. Lisäksi varsinaiseen siirtohinnoittelujärjestelmään yleensä vaikuttavat useat sisäiset ja ulkoiset tekijät. Lopullinen siirtohinnoittelumenetelmä tulisi ehdottomasti tukea myös yrityksen visiota ja muita liiketoiminnalle asetettuja strategioita. Työn tuloksena saatiin laajennettu Microsoft Excel –sovellus, joka vaatii sekä vuosittaista että kuukausittaista erikoisventtiilimateriaalien hinta- ja toimitusaikatietojen päivittämistä. Tämä ratkaisutapa ehdottomasti parantaa kustannusarviointiprosessia, koska myös alihankkijatietoja joudutaan tutkimaan systemaattisesti. Tämän jälkeen koko siirtohinnoitteluprosessia voidaan kehittää muuntamalla kokoonpano- ja testaustyövaiheiden kustannusrakennetta toimintoperustaisen kustannuslaskentamallin mukaiseksi.

Establishment of an In Vitro Photoallergy Test Using NCTC2544 Cells and IL-18 Production

Differentiation between photoallergenic and phototoxic reactions induced by low molecular weight compounds represents a current problem. The use of eratinocytes as a potential tool for the detection of photoallergens as opposed to photoirritants is considered an interesting strategy for developing in vitro methods. We have previously demonstrated the possibility to use the human keratinocyte cell line NCTC2455 and the production of interleukin-18 (IL-18) to screen low molecular weight sensitizers. The purpose of this work was to explore the possibility to use the NCTC2544 assay to identify photoallergens and discriminate from phototoxic chemicals. First, we identified suitable condition of UV-irradiation (3.5 J/cm2) by investigating the effect of UVAirradiation on intracellular IL-18 on untreated or chloropromazine (a representative phototoxic compound)- treated NCTC2544 cells. Then, the effect of UVA-irradiation over NCTC2544 cells treated with increasing concentrations of 15 compounds including photoallergens (benzophenone, 4-ter-butyl-4-methoxydibenzoylmethane, 2-ethylexyl-p-methoxycinnamate, ketoprofen, 6-methylcumarin); photoirritant and photoallergen (4-aminobenzoic acid, chlorpromazine, promethazine); photoirritants (acridine, ibuprofen, 8-methoxypsoralen, retinoic acid); and negative compounds (lactic acid, SDS and p-phenilendiamine) was investigated. Twenty-four hours after exposure, cytotoxicity was evaluated by the MTT assay or LDH leakage, while ELISA was used to measure the production of IL-18. At the maximal concentration assayed with non-cytotoxic effects (CV80 under irradiated condition), all tested photoallergens induced a significant and a dose-dependent increase of intracellular IL-18 following UVA irratiation, whereas photoirritants failed. We suggest that this system may be useful for the in vitro evaluation of the photoallergic potential of chemicals.

Lactobacillus delbrueckii UFV-H2b20 induces type 1 cytokine production by mouse cells in vitro and in vivo

Lactobacillus delbrueckii UFV-H2b20 has been shown to increase clearance of bacteria injected into the blood of germ-free mice. Moreover, it induces the production of type 1 cytokines by human peripheral mononuclear cells. The objective of the present study was to investigate the production of inflammatory cytokines [interleukin-12 (IL-12 p40), tumor necrosis factor-α (TNF-α), and interferon-γ (IFN-γ)] triggered in vitro by live, heat-killed or lysozyme-treated L. delbrueckii UFV-H2b20 and in vivo by a live preparation. Germ-free, L. delbrueckii-monoassociated and lipopolysaccharide (LPS)-resistant C3H/HeJ mice were used as experimental models. UFV-H2b20 induced the production of IL-12 p40 and TNF-α by peritoneal cells and IFN-γ by spleen cells from germ-free or monoassociated Swiss/NIH mice and LPS-hyporesponsive mice (around 40 ng/mL for IL-12 p40, 200 pg/mL for TNF-α and 10 ng/mL for IFN-γ). Heat treatment of L. delbrueckii did not affect the production of these cytokines. Lysozyme treatment decreased IL-12 p40 production by peritoneal cells from C3H/HeJ mice, but did not affect TNF-α production by these cells or IFN-γ production by spleen cells from the same mouse strain. TNF-α production by peritoneal cells from Swiss/NIH L. delbrueckii-monoassociated mice was inhibited by lysozyme treatment. When testing IL-12 p40 and IFN-γ levels in sera from germ-free or monoassociated Swiss/NIH mice systemically challenged with Escherichia coli we observed that IL-12 p40 was produced at marginally higher levels by monoassociated mice than by germ-free mice (40 vs 60 ng/mL), but IFN-γ was produced earlier and at higher levels by monoassociated mice (monoassociated 4 and 14 ng/mL 4 and 8 h after infection, germfree 0 and 7.5 ng/mL at the same times). These results show that L. delbrueckii UFV-H2b20 stimulates the production of type 1 cytokines in vitro and in vivo, therefore suggesting that L. delbrueckii might have adjuvant properties in infection in which these cytokines play a major role.

Production, solubility and antioxidant activity of curcumin nanosuspension

Curcumin is a powerful bioactive agent and natural antioxidant, but it is practically water-insoluble and has low bioavailability; a possible solution to this obstacle would be formulations of curcumin nanoparticles. Surfactants such as tween 80 can be used to stabilize low-solubility molecules preventing particle aggregation. The objectives of this study were the preparation of a suspension with curcumin nanoparticles in tween 80, the testing of pure curcumin solubility and of a simple mixture of curcumin with tween 80 and nanosuspension in water and ethanol as solvents, and finally the assessment of the antioxidant activity. We prepared the nanosuspension by injecting a curcumin solution in dichloromethane at low flow in water with tween 80 under heating and ultrasound. The analysis of particles size was conducted through dynamic light scattering; the non-degradation of curcumin was verified through thin-layer chromatography. The analyses of antioxidant activity were carried out according to the DPPH method. The method applied to reduce the particles size was efficient. Both the curcumin suspension and nanosuspension in tween 80 increased its solubility. Curcumin and the formulations presented antioxidant activity.

Compositional hypotheses of subcompositional stability and specific perturbation change and their testing

In standard multivariate statistical analysis common hypotheses of interest concern changes in mean vectors and subvectors. In compositional data analysis it is now well established that compositional change is most readily described in terms of the simplicial operation of perturbation and that subcompositions replace the marginal concept of subvectors. To motivate the statistical developments of this paper we present two challenging compositional problems from food production processes. Against this background the relevance of perturbations and subcompositions can be clearly seen. Moreover we can identify a number of hypotheses of interest involving the specification of particular perturbations or differences between perturbations and also hypotheses of subcompositional stability. We identify the two problems as being the counterpart of the analysis of paired comparison or split plot experiments and of separate sample comparative experiments in the jargon of standard multivariate analysis. We then develop appropriate estimation and testing procedures for a complete lattice of relevant compositional hypotheses