Studio, analisi e progettazione di un prototipo di infrastructure as code

La tesi inserita in un periodo di forte transizione dai sistemi On­premises a sistemi Cloud ha avuto l'esigenza di risolvere alcune problematiche legate alla definizione delle infrastrutture. Come poter scalare le risorse all'evenienza ricreando gli stessi ambienti, monitorandoli e mettendo in sicurezza i dati critici delle applicazioni? La tesi ha risposto proprio a questa domanda definendo un nuovo paradigma nel concepire le infrastrutture chiamato Infrastructure as Code. La tesi ha approfondito le pratiche e le metodologie che si sono legate maggiormente all'Infrastructure as Code tra le quali Version Control, Configuration Management, Continuous Integration e Continuous Delivery. La tesi inoltre ha previsto la realizzazione di un prototipo finale nato dallo studio del flusso di sviluppo software aziendale, definendo gli ambienti in accordo ai sistemi di Version Control e Configuration Management, applicando pratiche di integrazione continua per giungere ad una deployment pipeline funzionale.

Minimização de resíduos do processamento do café solúvel através do reaproveitamento da borra para extração de óleo utilizando solvente renovável

O principal resíduo da indústria de café solúvel é a borra de café, gerada após a extração de sólidos solúveis com água, sendo usualmente queimada em caldeiras para geração de energia para a própria indústria. Entretanto, este co-produto pode conter de 15 a 20 % de óleo, componente de grande interesse na indústria alimentícia. Em paralelo, na indústria de produção de óleos vegetais o solvente frequentemente utilizado é o hexano. Contudo, por este ser um derivado de combustíveis fósseis, alternativas para sua substituição por solventes mais amigáveis ao meio ambiente, que podem ser obtidos por via biotecnológica, estão sendo estudadas. Deste modo, o objetivo principal desta dissertação de mestrado foi a viabilização técnica do emprego de solventes alcoólicos no processo de extração de óleo de borra de café proveniente da indústria de processamento de café solúvel. Foram realizadas extrações sólido-líquido em um estágio para estudar a influência das variáveis de processo temperatura (60 a 90 °C), tipo de solvente (etanol, ET ou isopropanol, IPA) e a hidratação do solvente (absoluto ou azeotrópico) nas características das fases extrato e rafinado, em termos de rendimento de extração de óleo, de ácidos clorogênicos (ACG), de carboidratos totais, teor de proteínas e índice de solubilidade de nitrogênio (ISN) da fase rafinado. Pré-tratamento enzimático ao processo de extração também foi realizado para investigar a sua atuação sobre o rendimento de extração de óleo e ACG, além do ISN das fases rafinado obtidas na temperatura de 70 °C. De forma geral, pode-se inferir que a temperatura favorece a extração de compostos lipídicos, mas a hidratação do solvente prejudica a extração destes compostos pelo aumento da polaridade do solvente. Do mesmo modo, como o ET é mais polar que o IPA, o primeiro solvente proporcionou a obtenção de menores rendimentos de extração de óleo. A temperatura de processo também influenciou a extração de ACG, a qual foi beneficiada a temperaturas mais baixas pelo aumento da polaridade dos solventes utilizados. De tal forma, que a 60 °C, nos experimentos utilizando etanol azeotrópico obteve-se os menores rendimentos de extração de óleo, porém maior rendimento de extração de ACG. O pré-tratamento enzimático apresentou diferenças significativas nas características das fases extrato e rafinado. No entanto, somente os experimentos com etanol absoluto resultaram em rendimentos de extração de óleo economicamente viáveis. De fato, será relevante um estudo mais aprofundado das variáveis de pré-tratamento enzimático para obter resultados mais expressivos em relação à extração de compostos lipídicos. Diante dos dados experimentais obtidos, conclui-se que é tecnicamente viável o emprego de solventes alcoólicos no processo de extração de óleo de borra de café. Entretanto, nota-se que as condições de processo devem ser avaliadas minuciosamente com o objetivo de se obter altos rendimentos de extração de óleo com maior teor de ACG.

Postharvest infection of Freesia hybrida flowers by Botrytis cinerea

'Specking' on harvested freesia (Freesia hybrida) flowers is a problem worldwide. The disease is caused by the fungal pathogen Botrytis cinerea. This disease symptom detracts from appearance and reduces marketability of the flowers. Unlike other important cut flower crops (e.g. gerbera), the mode of infection and epidemiology of postharvest freesia flower specking caused by B. cinerea has not been reported. Epidemiological studies were carried out under simulated conditions typical of those occurring during postharvest handling of freesia flowers. Infection of freesia flowers by B. cinerea occurred when a conidium germinated, formed a germ tube(s) and penetrated epidermal cells. Fungal hyphae then colonised adjacent cells, resulting in visible lesions. Different host reactions were observed on freesia 'Cote d'Azur' petals at 20 degrees C compared to 5 degrees C. The infection process was relatively rapid at 20 degrees C, with visible lesions produced within 7 h of incubation. However, lesion expansion ceased after 24 h of incubation. Infection was slower at 5 degrees C, with visible lesions produced after 48 h of incubation. However, lesion development at 5 degrees C was continuous, with lesions expanding over 4 days. Light microscopy observations revealed increased host defence reactions during infection. These reactions involved production of phenolic compounds, probably lignin and/or callose, around infection sites. Such substances may play a role in restricting petal colonisation and lesion expansion. Disease severity and lesion numbers on freesia flowers incubated at 12 degrees C were higher, but not significantly higher (P > 0.05), than on those incubated at 20 degrees C. Disease severity and progression were differentially mediated by temperature and relative humidity (R. H.). Infection of freesia flowers was severe at 100% R. H. for all three incubation temperatures of 5, 12 and 20 degrees C. In contrast, no lesions were produced at 80 to 90% R. H. at either 5 or 20 degrees C.

The automation of protein crystal presentation for x ray diffraction experiments using standing acoustic waves in a microfluidic chip environment

As the pressure continues to grow on Diamond and the world's synchrotrons for higher throughput of diffraction experiments, new and novel techniques are required for presenting micron dimension crystals to the X ray beam. Currently this task is both labour intensive and primarily a serial process. Diffraction measurements typically take milliseconds but sample preparation and presentation can reduce throughput down to 4 measurements an hour. With beamline waiting times as long as two years it is of key importance for researchers to capitalize on available beam time, generating as much data as possible. Other approaches detailed in the literature [1] [2] [3] are very much skewed towards automating, with robotics, the actions of a human protocols. The work detailed here is the development and discussion of a bottom up approach relying on SSAW self assembly, including material selection, microfluidic integration and tuning of the acoustic cavity to order the protein crystals.

The automation of protein crystal presentation for X ray diffraction experiments using standing acoustic waves in a microfluidic chip environment

As the pressure continues to grow on Diamond and the world's synchrotrons for higher throughput of diffraction experiments, new and novel techniques are required for presenting micron dimension crystals to the X ray beam. Currently this task is both labour intensive and primarily a serial process. Diffraction measurements typically take milliseconds but sample preparation and presentation can reduce throughput down to 4 measurements an hour. With beamline waiting times as long as two years it is of key importance for researchers to capitalize on available beam time, generating as much data as possible. Other approaches detailed in the literature [1] [2] [3] are very much skewed towards automating, with robotics, the actions of a human protocols. The work detailed here is the development and discussion of a bottom up approach relying on SSAW self assembly, including material selection, microfluidic integration and tuning of the acoustic cavity to order the protein crystals.

Determinação dos parâmetros ótimos na furação do tecido ósseo com recurso ao método de Taguchi

Ao longo do processo de furação, muitas vezes utilizado para a fixação de implantes, é gerado um aumento de temperatura. Se o aumento da temperatura for acima dos 47˚ pode ocorrer a necrose do tecido ósseo com a consequente diminuição da eficiência do sistema de fixação. No presente estudo foram utilizados fémures de bovino ex-vivo com o objetivo de estudar o efeito da velocidade de rotação e diâmetro da broca no aumento de temperaturas durante o processo de furação.

O projeto COMAP - comissão de apadrinhamento

Trabalho de Projeto apresentado ao Instituto Superior de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação do Mestre António da Silva Vieira

Desenvolvimento de software com integração contínua

A integração contínua é uma prática no desenvolvimento de software que já existe há algum tempo mas ainda não é muito conhecida nem usada. Esta prática no desenvolvimento de software surgiu com a programação extrema e tem evoluído ao longo dos últimos anos, adaptando-se às novas tecnologias. O estudo aqui apresentado pretende essencialmente mostrar a real importância e o valor acrescido que a integração contínua pode trazer a um projeto de desenvolvimento de software. O trabalho aqui exposto surge no âmbito de um projeto interno, realizado pelo autor na empresa Konkconsulting, cuja finalidade se prende com o conhecimento mais aprofundado da integração contínua e com o levantamento das necessidades e criação de soluções, de modo a conseguir a sua utilização nos produtos que irão ser desenvolvidos pela empresa. Nesta dissertação, é proposto um conjunto de ferramentas para responder às necessidades imediatas da empresa na implementação de integração contínua num dos seus projetos. Estas ferramentas devem ser de simples e de fácil utilização, de modo a ajudar os programadores durante os desenvolvimentos e responder às necessidades da utilização da integração contínua em um projeto a ser desenvolvido pela empresa, mas ao mesmo tempo, podendo ser facilmente incorporadas em futuros projetos.

Modelling tree population dynamics at the alpine and boreal tree-line ecotones in response to climate and land-use change

Summary Ecotones are sensitive to change because they contain high numbers of species living at the margin of their environmental tolerance. This is equally true of tree-lines, which are determined by attitudinal or latitudinal temperature gradients. In the current context of climate change, they are expected to undergo modifications in position, tree biomass and possibly species composition. Attitudinal and latitudinal tree-lines differ mainly in the steepness of the underlying temperature gradient: distances are larger at latitudinal tree-lines, which could have an impact on the ability of tree species to migrate in response to climate change. Aside from temperature, tree-lines are also affected on a more local level by pressure from human activities. These are also changing as a consequence of modifications in our societies and may interact with the effects of climate change. Forest dynamics models are often used for climate change simulations because of their mechanistic processes. The spatially-explicit model TreeMig was used as a base to develop a model specifically tuned for the northern European and Alpine tree-line ecotones. For the latter, a module for land-use change processes was also added. The temperature response parameters for the species in the model were first calibrated by means of tree-ring data from various species and sites at both tree-lines. This improved the growth response function in the model, but also lead to the conclusion that regeneration is probably more important than growth for controlling tree-line position and species' distributions. The second step was to implement the module for abandonment of agricultural land in the Alps, based on an existing spatial statistical model. The sensitivity of its most important variables was tested and the model's performance compared to other modelling approaches. The probability that agricultural land would be abandoned was strongly influenced by the distance from the nearest forest and the slope, bath of which are proxies for cultivation costs. When applied to a case study area, the resulting model, named TreeMig-LAb, gave the most realistic results. These were consistent with observed consequences of land-abandonment such as the expansion of the existing forest and closing up of gaps. This new model was then applied in two case study areas, one in the Swiss Alps and one in Finnish Lapland, under a variety of climate change scenarios. These were based on forecasts of temperature change over the next century by the IPCC and the HadCM3 climate model (ΔT: +1.3, +3.5 and +5.6 °C) and included a post-change stabilisation period of 300 years. The results showed radical disruptions at both tree-lines. With the most conservative climate change scenario, species' distributions simply shifted, but it took several centuries reach a new equilibrium. With the more extreme scenarios, some species disappeared from our study areas (e.g. Pinus cembra in the Alps) or dwindled to very low numbers, as they ran out of land into which they could migrate. The most striking result was the lag in the response of most species, independently from the climate change scenario or tree-line type considered. Finally, a statistical model of the effect of reindeer (Rangifer tarandus) browsing on the growth of Pinus sylvestris was developed, as a first step towards implementing human impacts at the boreal tree-line. The expected effect was an indirect one, as reindeer deplete the ground lichen cover, thought to protect the trees against adverse climate conditions. The model showed a small but significant effect of browsing, but as the link with the underlying climate variables was unclear and the model was not spatial, it was not usable as such. Developing the TreeMig-LAb model allowed to: a) establish a method for deriving species' parameters for the growth equation from tree-rings, b) highlight the importance of regeneration in determining tree-line position and species' distributions and c) improve the integration of social sciences into landscape modelling. Applying the model at the Alpine and northern European tree-lines under different climate change scenarios showed that with most forecasted levels of temperature increase, tree-lines would suffer major disruptions, with shifts in distributions and potential extinction of some tree-line species. However, these responses showed strong lags, so these effects would not become apparent before decades and could take centuries to stabilise. Résumé Les écotones son sensibles au changement en raison du nombre élevé d'espèces qui y vivent à la limite de leur tolérance environnementale. Ceci s'applique également aux limites des arbres définies par les gradients de température altitudinaux et latitudinaux. Dans le contexte actuel de changement climatique, on s'attend à ce qu'elles subissent des modifications de leur position, de la biomasse des arbres et éventuellement des essences qui les composent. Les limites altitudinales et latitudinales diffèrent essentiellement au niveau de la pente des gradients de température qui les sous-tendent les distance sont plus grandes pour les limites latitudinales, ce qui pourrait avoir un impact sur la capacité des espèces à migrer en réponse au changement climatique. En sus de la température, la limite des arbres est aussi influencée à un niveau plus local par les pressions dues aux activités humaines. Celles-ci sont aussi en mutation suite aux changements dans nos sociétés et peuvent interagir avec les effets du changement climatique. Les modèles de dynamique forestière sont souvent utilisés pour simuler les effets du changement climatique, car ils sont basés sur la modélisation de processus. Le modèle spatialement explicite TreeMig a été utilisé comme base pour développer un modèle spécialement adapté pour la limite des arbres en Europe du Nord et dans les Alpes. Pour cette dernière, un module servant à simuler des changements d'utilisation du sol a également été ajouté. Tout d'abord, les paramètres de la courbe de réponse à la température pour les espèces inclues dans le modèle ont été calibrées au moyen de données dendrochronologiques pour diverses espèces et divers sites des deux écotones. Ceci a permis d'améliorer la courbe de croissance du modèle, mais a également permis de conclure que la régénération est probablement plus déterminante que la croissance en ce qui concerne la position de la limite des arbres et la distribution des espèces. La seconde étape consistait à implémenter le module d'abandon du terrain agricole dans les Alpes, basé sur un modèle statistique spatial existant. La sensibilité des variables les plus importantes du modèle a été testée et la performance de ce dernier comparée à d'autres approches de modélisation. La probabilité qu'un terrain soit abandonné était fortement influencée par la distance à la forêt la plus proche et par la pente, qui sont tous deux des substituts pour les coûts liés à la mise en culture. Lors de l'application en situation réelle, le nouveau modèle, baptisé TreeMig-LAb, a donné les résultats les plus réalistes. Ceux-ci étaient comparables aux conséquences déjà observées de l'abandon de terrains agricoles, telles que l'expansion des forêts existantes et la fermeture des clairières. Ce nouveau modèle a ensuite été mis en application dans deux zones d'étude, l'une dans les Alpes suisses et l'autre en Laponie finlandaise, avec divers scénarios de changement climatique. Ces derniers étaient basés sur les prévisions de changement de température pour le siècle prochain établies par l'IPCC et le modèle climatique HadCM3 (ΔT: +1.3, +3.5 et +5.6 °C) et comprenaient une période de stabilisation post-changement climatique de 300 ans. Les résultats ont montré des perturbations majeures dans les deux types de limites de arbres. Avec le scénario de changement climatique le moins extrême, les distributions respectives des espèces ont subi un simple glissement, mais il a fallu plusieurs siècles pour qu'elles atteignent un nouvel équilibre. Avec les autres scénarios, certaines espèces ont disparu de la zone d'étude (p. ex. Pinus cembra dans les Alpes) ou ont vu leur population diminuer parce qu'il n'y avait plus assez de terrains disponibles dans lesquels elles puissent migrer. Le résultat le plus frappant a été le temps de latence dans la réponse de la plupart des espèces, indépendamment du scénario de changement climatique utilisé ou du type de limite des arbres. Finalement, un modèle statistique de l'effet de l'abroutissement par les rennes (Rangifer tarandus) sur la croissance de Pinus sylvestris a été développé, comme première étape en vue de l'implémentation des impacts humains sur la limite boréale des arbres. L'effet attendu était indirect, puisque les rennes réduisent la couverture de lichen sur le sol, dont on attend un effet protecteur contre les rigueurs climatiques. Le modèle a mis en évidence un effet modeste mais significatif, mais étant donné que le lien avec les variables climatiques sous jacentes était peu clair et que le modèle n'était pas appliqué dans l'espace, il n'était pas utilisable tel quel. Le développement du modèle TreeMig-LAb a permis : a) d'établir une méthode pour déduire les paramètres spécifiques de l'équation de croissance ä partir de données dendrochronologiques, b) de mettre en évidence l'importance de la régénération dans la position de la limite des arbres et la distribution des espèces et c) d'améliorer l'intégration des sciences sociales dans les modèles de paysage. L'application du modèle aux limites alpines et nord-européennes des arbres sous différents scénarios de changement climatique a montré qu'avec la plupart des niveaux d'augmentation de température prévus, la limite des arbres subirait des perturbations majeures, avec des glissements d'aires de répartition et l'extinction potentielle de certaines espèces. Cependant, ces réponses ont montré des temps de latence importants, si bien que ces effets ne seraient pas visibles avant des décennies et pourraient mettre plusieurs siècles à se stabiliser.

Test automation scheme for LTE core network element

Modern sophisticated telecommunication devices require even more and more comprehensive testing to ensure quality. The test case amount to ensure well enough coverage of testing has increased rapidly and this increased demand cannot be fulfilled anymore only by using manual testing. Also new agile development models require execution of all test cases with every iteration. This has lead manufactures to use test automation more than ever to achieve adequate testing coverage and quality. This thesis is separated into three parts. Evolution of cellular networks is presented at the beginning of the first part. Also software testing, test automation and the influence of development model for testing are examined in the first part. The second part describes a process which was used to implement test automation scheme for functional testing of LTE core network MME element. In implementation of the test automation scheme agile development models and Robot Framework test automation tool were used. In the third part two alternative models are presented for integrating this test automation scheme as part of a continuous integration process. As a result, the test automation scheme for functional testing was implemented. Almost all new functional level testing test cases can now be automated with this scheme. In addition, two models for integrating this scheme to be part of a wider continuous integration pipe were introduced. Also shift from usage of a traditional waterfall model to a new agile development based model in testing stated to be successful.

Coaching agile methods in research and development projects

Agile coaching of a project team is one way to aid learning of the agile methods. The objective of this thesis is to present the agile coaching plan and to follow how complying the plan affects to the project teams. Furthermore, the agile methods are followed how they work in the projects. Two projects are used to help the research. From the thesis point of view, the task for the first project is to coach the project team and two new coaches. The task for the second project is also to coach the project team, but this time so that one of the new coaches acts as the coach. The agile methods Scrum process and Extreme programming are utilized by the projects. In the latter, the test driven development, continuous integration and pair programming are concentrated more precisely. The results of the work are based on the observations from the projects and the analysis derived from the observations. The results are divided to the effects of the coaching and to functionality of the agile methods in the projects. Because of the small sample set, the results are directional. The presented plan, to coach the agile methods, needs developing, but the results of the functionality of the agile methods are encouraging.

SimpleREST -RESTful DSpace API

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Sistemas certificáveis de gestão ambiental e da qualidade: práticas para integração em empresas do setor moveleiro

O principal objetivo deste artigo é propor, a partir do referencial teórico e de um estudo de caso em uma empresa moveleira, práticas para integração de sistemas certificáveis de gestão ambiental e da qualidade. A coleta de dados do estudo de caso se deu por meio de entrevistas semiestruturadas com o responsável direto pelos dois sistemas e com alguns colaboradores-chave do nível operacional, além de análise documental e de visitas in loco. Ao final deste artigo, são propostas práticas para integração desses sistemas, relacionadas aos seguintes elementos: alta administração; apoio administrativo, financeiro e pessoal; serviço de consultoria; coordenação do programa de integração; interface entre os sistemas; capacitação técnico-gerencial; sistema de liderança, prospecção, avaliação e desenvolvimento de fornecedores; sistema de informação; indicadores; comunicação com o cliente, e integração contínua.