Mapping the sites of latency and reactivation by bovine herpesvirus 5 (BoHV-5) and a thymidine kinase-deleted BoHV-5 in lambs

A thymidine kinase (tk)-deleted bovine herpesvirus 5 (BoHV-5tkΔ) was previously shown to establish latent infection and reactivate - even poorly - in a sheep model (Cadore et al. 2013). As TK-negative alphaherpesviruses are unlike to reactivate in neural tissue, this study investigated the sites of latency and reactivation by this recombinant in lambs. For this, groups of lambs were inoculated intranasally with the parental BoHV-5 strain (SV-507/99) or with the recombinant BoHV-5tkΔ. During latent infection (40 days post-inoculation, pi), the distribution of recombinant virus DNA in neural and non-neural tissues was similar to that of the parental virus. Parental and recombinant virus DNA was consistently detected by PCR in trigeminal ganglia (TGs); frequently in palatine and pharyngeal tonsils and, less frequently in the retropharyngeal lymph nodes. In addition, latent DNA of both viruses was detected in several areas of the brain. After dexamethasone (Dx) administration (day 40pi), the recombinant virus was barely detected in nasal secretions contrasting with marked shedding of the parental virus. In tissues of lambs euthanized at day 3 post-Dx treatment (pDx), reverse-transcription-PCR (RT-PCR) for a late viral mRNA (glycoprotein D gene) demonstrated reactivation of parental virus in neural (TGs) and lymphoid tissues (tonsils, lymph node). In contrast, recombinant virus mRNA was detected only in lymphoid tissues. These results demonstrate that BoHV-5 and the recombinant BoHV-5tkΔ do establish latent infection in neural and non-neural sites. Reactivation of the recombinant BoHV-5tkΔ, however, appeared to occur only in non-neural sites. In anyway, the ability of a tk-deleted strain to reactivate latent infection deserves attention in the context of vaccine safety.

L-histidine reduces inhibitory avoidance in Carassius auratus submitted to cerebellar ablation

The effect of post-training treatment with L-histidine (LH) on the memory consolidation of inhibitory avoidance was investigated in Carassius auratus submitted to cerebellar ablation. The inhibitory avoidance procedure included 3 days: one habituation day, one training day (5 trials, T1-T5) and one test day. On the training day, each fish was placed individually in a white compartment separated from a black compartment by a sliding door. When the fish crossed into the black compartment, a weight was dropped in front of it (aversive stimulus) and the time to cross was recorded. Saline or LH (100 mg/kg) was injected intraperitoneally 10 min after the trials. Data were log10 transformed and analyzed by ANOVA and the Student-Newman-Keuls test (P < 0.05). In T5, all groups [ablation/LH (N = 15; 189.60 ± 32.52), ablation/saline (N = 14; 204.29 ± 28.95), sham/LH (N = 14; 232.36 ± 28.15), and sham/saline (N = 15; 249.07 ± 25.82)] had similar latencies that were significantly higher than T1 latencies [ablation/LH (89.33 ± 20.41), ablation/saline (97.00 ± 25.16), sham/LH (73.86 ± 18.42), and sham/saline (56.71 ± 17.59)], suggesting acquisition of inhibitory avoidance. For the test, there was a significant reduction in latencies of ablation/LH (61.53 ± 17.70) and sham/saline (52.79 ± 25.37) groups compared to the ablation/saline (213.64 ± 29.57) and sham/LH (199.43 ± 24.48) groups, showing that cerebellum ablation facilitated retention of inhibitory avoidance and LH reversed the effect of ablation. The results support other evidence that LH impairs memory consolidation and/or reduces the interpretation of aversion value.

Investigation of the fatigue performance of welded duplex stainless steel

Diplomityössä tutkitaan hitsatun duplex-teräksen, laatu: EN 1.4462 (Outokumpu laatu 2205) väsymislujuutta. Tutkimusmetodologia noudattaa sekä kokeellisia että laskennallisia menetelmiä. Kokeelliset menetelmät sisältävät hitsatun teräksen väsytystestaukset laboratoriossa, hitsausten jälkikäsittelyt (HiFIT) sekä perusaineelle ja hitseille tehtävät metallurgiset tutkimukset. Väsytyskokeista saatavia tuloksia verrataan kansainvälisen hitsausinstituutin (IIW) vahvistamiin rakennekohtaisiin standardeihin sekä kirjallisuudessa esiintyviin tutkimustuloksiin. Laskennalliset menetelmät sisältävät vertailulaskelmia tehollisen lovijännityksen (ENS) menetelmää hyödyntäen. Tehollisen lovijännityksen menetelmässä liitoksissa vaikuttavat teholliset lovijännitykset selvitetään elementtimenetelmän (FEM) avulla. Tulokset vahvistavat, että hitsauksella ja hitsausten jälkikäsittelyllä on suuri merkitys rakenteen kestoikään. Suurin osa väsytyskokeiden tuloksista osoitti parempia väsymiskestävyyden arvoja kuin rakennekohtaiset standardit, mutta liitosten liitosvirheiden todettiin heikentävän väsytyskestävyyttä. Jälkikäsittelyiden todettiin parantavan liitosten väsymiskestävyyden tuloksia ja todettiin tulosten olevan hyödynnettävissä mitoituksessa.

Tuning mesoporous molecular sieve SBA-15 for the immobilization of α-amylase

The present work describes the immobilization of α-amylase over well ordered mesoporous molecular sieve SBA-15 with different pore diameters synthesized by post synthesis treatment (PST) hydrothermally after reaction at 40°C. The materials were characterized by N 2 adsorption–desorption studies, small angle X-ray diffraction, scanning electron microscopy and high resolution transmission electron microscopy. Since α-amylase obtained from Bacillus subtilis has dimensions of 35 × 40 × 70 Å it is expected that the protein have access to the pore of SBA-15 (PST-120°C) with diameter 74 Å. The pore dimension is appropriate to prevent considerable leaching. The rate of adsorption of the enzyme on silica of various pore sizes revealed the influence of morphology, pore diameter, pore volume and pH.

Uveítis pediática no infecciosa, una experiencia de una cohorte colombiana

Resumen: •Antecedentes: La uveítis pediátrica no infecciosa tiene el potencial de desencadenar severas complicaciones visuales y su manejo farmacológico convencional está asociado a importantes efectos secundarios. 1 Infliximab (INF) y Adalimumab (ADA), son dos medicamentos biológicos disponibles para el manejo de la uveítis pediátrica refractaria. Se unen específicamente al TNFα y previenen la unión del mismo con los receptores celulares; interacción directamente implicada en el proceso inflamatorio y el subsecuente daño tisular. 2,3 •Métodos: Se realizó estudio de tipo cohorte retrospectiva mediante revisión de historias clínicas de 35 pacientes pediátricos diagnosticados con uveítis durante los años 2009-2015. Se comparó control de la inflamación ocular, tiempo de respuesta y eventos adversos en pacientes tratados con ADA o INF con dosis bajas de Metotrexate vs. Metotrexate (MTX) como única terapia. •Resultados: El 45.7% de la población estudiada correspondía al sexo femenino, cuya edad promedio de inicio de síntomas y de diagnósticos fue de 9 años. El 80% de los casos fueron uveítis idiopáticas, seguido por Vogt-Koyanagi-Harada (8,5%) y AIJ (5,7%). El 91,4% presentó compromiso ocular bilateral y se documentaron 2 casos de ambliopía. El 12,9% de los pacientes que recibieron MTX como tratamiento de primera línea requirieron escalonamiento terapéutico por presentar eventos adversos (Elevación de enzimas hepáticas e intolerancia gastrointestinal (GI)). El tiempo promedio para alcanzar control de la inflamación con MTX fue 9 semanas, y para Adalimumab fue de 8,75 semanas (P: 0,90). Se comparó la capacidad de controlar la inflamación del MTX vs Anti-TNF, y no se observaron diferencias significativas (P: 0.88).

Effect of blood contamination on the shear bond strength at resin/dentin interface in primary teeth

Purpose: To assess in vitro the shear bond strength at the resin/dentin interface in primary teeth after contamination with fresh human blood. Methods: 75 crowns of primary molars were embedded in acrylic resin and mechanically ground to expose a flat dentin surface. The specimens were randomly assigned to five groups (n=15), according to the surface treatment. Group I (control) had no blood contamination. The other groups were blood-contaminated and subjected to different post-contamination protocols: in Group 2, the surfaces were rinsed with water; in Group 3, the surfaces were air-dried; in Group 4, the surfaces were rinsed and air-dried; and in Group 5, no post-contamination treatment was done. In all groups, a 3-mm dentin bonding site was demarcated, Single Bond adhesive system was applied and resin composite cylinders were bonded. After 24 hours in distilled water, shear bond strength was tested at a crosshead speed of 0.5 mm/minute. Results: Means (in MPa) were: Group 1: 7.1 (+/- 4.2); Group 2: 4.0 (+/- 1.8); Group 3: 0.9 (+/- 0.7); Group 4: 3.9 (+/- 2.2) and Group 5: 1.3 (+/- 1.5). Data were analyzed statistically by the Kruskal-Wallis test at 5% significance level. Groups 2 and 4 were similar to each other (P > 0.05) and both ware similar to Group 1 (P > 0.05). These groups (2, 3 and 4) had statistically significantly higher bond strengths than Groups 3 and 5 (P < 0.05). Blood contamination negatively affected the shear bond strength to primary tooth dentin. Among the blood-contaminated groups, water-rinsed specimens had higher bond strengths than those that were exclusively air-dried or not submitted to any post-contamination protocol before adhesive application.

Qualidade pós-colheita de goiabas 'Branca de Kumagai', tratadas com cloreto de cálcio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and electrochemical properties of LiCoO2 prepared by combustion synthesis

LiCoO2 powders were prepared by combustion synthesis, using metallic nitrates as the oxidant and metal sources and urea as fuel. A small amount of the LiCoO2 phase was obtained directly from the combustion reaction, however, a heat treatment was necessary for the phase crystallization. The heat treatment was performed at the temperature range from 400 up to 700 degreesC for 12 h. The powders were characterized by X-ray diffraction (XRD), X ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and specific surface area values were obtained by BET isotherms. Composite electrodes were prepared using a mixture of LiCoO2, carbon black and poly(vinylidene fluoride) (PVDF) in the 85:10:5% w/w ratio. The electrochemical behavior of these composites was evaluated in ethylene carbonate/dimethylcarbonate solution, using lithium perchlorate as supporting electrolyte. Cyclic voltammograms showed one reversible redox process at 4.0/3.85 V and one irreversible redox process at 3.3 V for the LiCoO2 obtained after a post-heat treatment at 400 and 500 degreesC.Raman spectroscopy showed the possible presence of LiCoO2 with cubic structure for the material obtained at 400 and 500 degreesC. This result is in agreement with X-ray data with structural refinement for the LiCoO2 powders obtained at different temperatures using the Rietveld method. Data from this method showed the coexistence of cubic LiCoO2 (spinel) and rhombohedral (layered) structures when LiCoO2 was obtained at lower temperatures (400 and 500 degreesC). The single rhombohedral structure for LiCoO2 was obtained after post-heat treatment at 600 degreesC. The maximum energy capacity in the first discharge was 136 mA g(-1) for the composite electrode based on LiCoO2 obtained after heat treatment at 700 degreesC. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Evaluation of cytokines concentration and percentage of survival of rabies virus-infected mice submitted to anti-rabies Vero-cell propagated vaccine and P-acnes

Previously, survival of rabies infection was shown to correlate with low IL-6 serum concentration in mice subjected to post-exposure treatment with the Fuenzalida Palacios rabies vaccine in conjunction with the immunomodulator Propionibacterium acnes, previously Corynebacterium parvum. Considering the substitution of the Fuenzalida Palacios rabies vaccine by the Vero cell raised anti-rabies vaccine in almost all countries, the objective of this work was to evaluate the survival and cytokine serum concentration of rabies virus-infected mice treated with P. acnes in conjunction with or the anti-rabies-VERO vaccine. For this, Swiss mice were experimentally infected with street rabies virus and subjected to vaccine and/or P. acnes following infection. Animals were killed at different times and serum was collected to evaluate cytokines. The greatest survival was observed in animals given one or two does of P. acnes in the absence of vaccination. Animals given anti-rabies VERO vaccine alone or with three doses of P. acnes had the second highest survival rate. The group that had the highest percentage of mortality also had the highest IL-6 concentration on the 10th day, a time correlating with clinical symptoms of the animals. The results reinforce the inefficacy of anti-rabies vaccine in only one dose as a post-exposure treatment irrespective of the type of vaccine used, the immunomodulation activity of P. acnes in rabies post-exposure treatment and suggest a role for IL-6 in rabies virus pathogenesis. (c) 2006 Elsevier B.V. All rights reserved.

Distribution of rabies virus in infected mice, vaccinated and submitted to P-acnes as immunomodulator

The lethality and distribution of rabies virus were evaluated in swiss mice experimentally infected with street rabies virus, vaccinated and submitted to immunomodulation by P. acnes (formerly Corynebacterium parvum). The animals were sacrificed at different times,when the different tissues were collected and submitted to fluorescent antibody test (FAT) and mouse inoculation test (MIT). The group submitted to vaccination and P. acnes treatment presented a percentage of survival superior to that observed in infected mice only treated with P. acnes. Control infected animals had the lowest survival rates. The distribution of rabies virus in spleen of infected mice, vaccinated and submitted to P. acnes was superior to that verified in infected mice not treated with P. acnes. The increased survival correlated with the distribution of rabies virus in lymphoid tissues, could be interpreted as the consequence of P. acnes activity on macrophages. The results suggest the role of macrophages against rabies virus infection in mice and the importance of vaccination in the post expositive treatment of rabies. (C) 2002 Published by Elsevier B.V. Ltd.

Influence of Remineralizing Gels on Bleached Enamel Microhardness In Different Time Intervals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

Objectives. This study characterized the feldspathic ceramic surfaces after various silanization protocols.Methods. Ceramic bars (2 mm x 4 mm x 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine groups (N = 2 per group) and were treated with different silane protocols. MPS silane (ESPE-Sil, 3M ESPE) was applied to all specimens and left to react at 20 degrees C for 2 min (G20). After drying, the specimens were subjected to heat treatment in an oven at 38 degrees C (G38), 79 degrees C (G79) or 100 degrees C (G100) for 1 min. Half of the specimens of each group were rinsed with water at 80 degrees C for 15 s (G20B, G38B, G79B, G100B). The control group (GC) received no silane. Attenuated total reflection infrared Fourier transform analysis (ATR FT-IR) was performed using a spectrometer. Thickness of silane layer was measured using a spectroscopic ellip-someter working in the lambda = 632.8 nm (He-Ne laser) at 70 degrees incidence angle. Surface roughness was evaluated using an optical profilometer. Specimens were further analyzed under the Scanning Electron Microscopy (SEM) to observe the topographic patterns.Results. ATR FT-IR analysis showed changes in Si-O peaks with enlarged bands around 940 cm(-1). Ellipsometry measurements showed that all post-heat treatment actions reduced the silane film thickness (30.8-33.5 nm) compared to G20 (40 nm). The groups submitted to rinsing in hot water (B groups) showed thinner silane films (9.8-14.4 nm) than those of their corresponding groups (without washing) (30.8-40 nm). Profilometer analysis showed that heat treatments (Ra approximate to 0.10-0.19 mu m; Rq approximate to 0.15-0.26 mu m) provided a smoother surface than the control group (Ra approximate to 0.48 mu m; Rq approximate to 0.65 mu m). Similar patterns were also observed in SEM images.Significance. Heat treatment after MPS silane application improved the silane layer network. Rinsing with boiling water eliminated the outmost unreacted regions of the silane yielding to thinner film thicknesses. (C) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Sensitivity of SnO2 non-ohmic behavior to the sintering process and to the addition of La2O3

The work reported here consisted of a study of the sensitivity of the nonlinear electrical properties of dense SnO2. CoO ceramic systems to low concentrations of La2O3, sintering temperature and cooling rates. The nonlinear electrical properties of these systems were found to increase with decreasing cooling rates, a behavior attributed to the CoO solid state reactions at temperatures below 1000 degreesC. Post-annealing treatment in N-2-rich atmospheres strongly decreases the non-ohmic behavior of SnO2. CoO ceramic systems. However, this behavior may be restored through thermal treatment in an O-2-rich atmosphere. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

EFFECT OF FENCAMFAMINE ON AVOIDANCE PERFORMANCES OF RATS

The effects of fencamfamine (1.0 and 5.0 mg/kg, ip, single dose) on an inhibitory task were studied in rats (N = 15 per group). Post-training treatment with fencamfamine (1.0 mg/kg) significantly increased avoidance latency from 23 +/- 3 to 146 +/- 28 and 170 +/- 33 s for training day 1 and day 7, respectively, indicating an enhancement of retention. However, retention was significantly reduced with a high dose of fencamfamine (5.0 mg/kg). These results demonstrate that fencamfamine caused a reproducible dose-related increase and reduction in avoidance latency.

Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)

It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and composition of the films were investigated using infrared reflectance/absorbance spectroscopy and X-ray photoelectron spectroscopy. The corrosion resistance of the layers was determined by electrochemical impedance spectroscopy (EIS) in a 3.5% NaCl solution, at room temperature. Films presented good adhesion to the substrates and are classified as hydrogenated amorphous carbon (a-C:H) with oxygen traces. Fluorine was detected in all the samples after the post-deposition treatment being its proportion independent on the deposition time. Film thickness presented different tendencies with t(dep), revealing the variation of the deposition rate as a function of the deposition time. Such fluorinated a-C:H films improved the corrosion resistance of the aluminum surface. In a general way the corrosion resistance was higher for films prepared with lower deposition times. The variation of sample temperature with t(dep) was found to be decisive for the concentration of defects in the films and, consequently, for the performance of the samples in electrochemical tests. Results are interpreted in terms of the energy delivered to the growing layer by ionic bombardment. (C) 2010 Elsevier B.V. All rights reserved.