Implementation of Reed-Solomon RS (255,239) Code

In this paper the construction of Reed-Solomon RS(255,239) codeword is described and the process of coding and decoding a message is simulated and verified. RS(255,239), or its shortened version RS(224,208) is used as a coding technique in Low-Power Single Carrier (LPSC) physical layer, as described in IEEE 802.11ad standard. The encoder takes 239 8-bit information symbols, adds 16 parity symbols and constructs 255-byte codeword to be transmitted through wireless communication channel. RS(255,239) codeword is defined over Galois Field GF and is used for correcting upto 8 symbol errors. RS(255,239) code construction is fully implemented and Simulink test project is constructed for testing and analyzing purposes.

A simulation-based algorithm for solving the resource-assignment problem in satellite telecommunication networks

This paper proposes an heuristic for the scheduling of capacity requests and the periodic assignment of radio resources in geostationary (GEO) satellite networks with star topology, using the Demand Assigned Multiple Access (DAMA) protocol in the link layer, and Multi-Frequency Time Division Multiple Access (MF-TDMA) and Adaptive Coding and Modulation (ACM) in the physical layer.

A WiMAX-based implementation of network MIMO for indoor wireless systems

It is well known that multiple-input multiple-output (MIMO) techniques can bring numerous benefits, such as higher spectral efficiency, to point-to-point wireless links. More recently, there has been interest in extending MIMO concepts tomultiuser wireless systems. Our focus in this paper is on network MIMO, a family of techniques whereby each end user in a wireless access network is served through several access points within its range of influence. By tightly coordinating the transmission and reception of signals at multiple access points, network MIMO can transcend the limits on spectral efficiency imposed by cochannel interference. Taking prior information-theoretic analyses of networkMIMO to the next level, we quantify the spectral efficiency gains obtainable under realistic propagation and operational conditions in a typical indoor deployment. Our study relies on detailed simulations and, for specificity, is conducted largely within the physical-layer framework of the IEEE 802.16e Mobile WiMAX system. Furthermore,to facilitate the coordination between access points, we assume that a high-capacity local area network, such as Gigabit Ethernet,connects all the access points. Our results confirm that network MIMO stands to provide a multiple-fold increase in spectralefficiency under these conditions.

A Secure and Anonymous Cooperative Sensing Protocol for Cognitive Radio Networks

Spectrum is an essential resource for the provision of mobile services. In order to control and delimit its use, governmental agencies set up regulatory policies. Unfortunately, such policies have led to a deficiency of spectrum as only few frequency bands are left unlicensed, and these are used for the majority of new emerging wireless applications. One promising way to alleviate the spectrum shortage problem is adopting a spectrum sharing paradigm in which frequency bands are used opportunistically. Cognitive radio is the key technology to enable this shift of paradigm.Cognitive radio networks are self-organized systems in which devices cooperate to use those spectrum ranges that are not occupied by licensed users. They carry out spectrum sensing in order to detect vacant channels that can be used for communication. Even though spectrum sensing is an active area of research, an important issue remains unsolved: the secure authentication of sensing reports. Not providing security enables the input of false data in the system thus empowering false results. This paper presents a distributed protocol based on wireless physical layer security, symmetric cryptography and one-way functions that allows determining a final sensing decision from multiple sources in a quick and secure way, as well as it preserves users¿ privacy.

Construction and performance of network codes

El principal objectiu d'aquest treball és implementar i exposar una descripció teòrica per a diferents esquemes de Physical Layer Network Coding. Utilitzant un esquema bàsic com a punt de partida, el projecte presenta la construcció i l'anàlisis de diferents esquemes de comunicació on la complexitat va augmentant a mesura que anem avançant en el projecte. El treball està estructurat en diferents parts: primer, es presenta una introducció a Physical Layer Network Coding i a Lattice Network Codes. A continuació, s'introdueixen les eines matemàtiques necessàries per entendre el CF System. Després, s'analitza i implementa el primer esquema bàsic. A partir del qual, implementem una versió vectorial del CF System i una versió codificada amb un Hamming q-ari. Finalment, s'estudien i implementen diferents estratègies per millorar la matriu de coeficients A.

ADSL-linjan fyysisen kerroksen testauksen automatisointi

ADSL (Asymmetrical Digital Subsciber Line) on puhelinkaapelia siirtotienä käyttävä nopea Internet-liityntäteknologia, joka on yleistynyt viime vuosina kuluttajamarkkinoilla. Analoginen puhelinverkko on alun perin tarkoitettu puheen siirtoon 0-4kHz:n äänitaajuuskanavalla, mikä aiheuttaa rajoitteita datasiirtoon ylemmillä taajuuksilla. Puhelinverkkojen rakenne vaihtelee alueittain sisältäen erilaisia datasiirtoa häiritseviä tekijöitä. Tämän vuoksi ADSL-päätelaitteilta vaaditaan sopeutumiskykyä vaativiinkin olosuhteisiin. Nykyiset ADSL-standardit eivät vaadi päätelaitteilta riittävää suorituskykyä, jotta luotettava tiedonsiirto onnistuisi myös huonoissa verkko-olosuhteissa. Epäkohdan korjaamiseksi DSL Forum on kehittänyt yhdessä laitevalmistajien, tietoliikenneoperaattoreiden ja komponenttivalmistajien kanssa ADSL-päätelaitteiden yhteensopivuustestaukseen testipaketin nimeltä TR-048. Se on kattava joukko tarkkaan kuvattuja testejä, joissa keskitytään enimmäkseen fyysisen kerroksen testaamiseen. TR-048:aa ei vaadita vielä nykyisissä ADSL-standardeissa, mutta yksityiset laboratoriot ja laitetoimittajat ovat vähitellen ottamassa sitä käyttöön. Tämän työn keskeisenä tavoittena oli tehdä sovellus, jolla automatisoitiin suurin osa TR-048:n sisältämien ADSL-linjan fyysisen kerroksen testeistä. Valmiilla sovelluksella ajetun testikierroksen perusteella arvioitiin sovelluksesta saatua hyötyä ja tuotekehitysvaiheessa olevan Nokia D500 tilaajasolmun suorituskykyä. Työn teoriaosassa esitellään ADSL-teknologiaa ja ADSL-lähetin-vastaanottimen loogista toimintaa.

EGPRS-muutokset matkapuhelimen fyysiselle signalointiprotokollatasolle

Tässä työssä käsitellään muutoksia, joita EGPRS-standardi aiheuttaa matkapuhelimen fyysiselle signalointiprotokollatasolle. EGPRS on laajennus normaaliin GPRS-verkkoon ja se mahdollistaa yhteistoiminnan Yhdysvalloissa käytetyn TDMA-matkapuhelinstandardin kanssa. EGPRS-puhelimessa puhelut hoidetaan TDMA-verkon kautta ja datan siirto GPRS-verkon kautta. EGPRS operoi GSM850 ja GSM1900 taajuusalueilla. EGPRS:n merkittävimpiä uusia ominaisuuksia ovat modulointimenetelmä EDGE ja kompaktit kontrollikanavat. Uudella modulointimenetelmällä saavutetaan kolminkertainen tiedonsiirtonopeus vanhaan modulointimenetelmään verrattuna. Kompaktien kontrollikanavien avulla voidaan tukiaseman taajuuskaistan tarvetta pienentää huomattavasti. Tukiasema voi käyttää vanhaa ja uutta modulointimenetelmää yhtä aikaa. EGPRS-verkko voi sisältää sekä kompakteja että normaaleja tukiasemia.

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.

Data Communications for Engineers

Written for communications and electronic engineers, technicians and students, this book begins with an introduction to data communications, and goes on to explain the concept of layered communications. Other chapters deal with physical communications channels, baseband digital transmission, analog data transmission, error control and data compression codes, physical layer standards, the data link layer, the higher layers of the protocol hierarchy, and local are networks (LANS). Finally, the book explores some likely future developments.

Multilayer optimization in radio resource allocation for the packet transmission in wireless networks

In the last decade mobile wireless communications have witnessed an explosive growth in the user’s penetration rate and their widespread deployment around the globe. It is expected that this tendency will continue to increase with the convergence of fixed Internet wired networks with mobile ones and with the evolution to the full IP architecture paradigm. Therefore mobile wireless communications will be of paramount importance on the development of the information society of the near future. In particular a research topic of particular relevance in telecommunications nowadays is related to the design and implementation of mobile communication systems of 4th generation. 4G networks will be characterized by the support of multiple radio access technologies in a core network fully compliant with the Internet Protocol (all IP paradigm). Such networks will sustain the stringent quality of service (QoS) requirements and the expected high data rates from the type of multimedia applications to be available in the near future. The approach followed in the design and implementation of the mobile wireless networks of current generation (2G and 3G) has been the stratification of the architecture into a communication protocol model composed by a set of layers, in which each one encompasses some set of functionalities. In such protocol layered model, communications is only allowed between adjacent layers and through specific interface service points. This modular concept eases the implementation of new functionalities as the behaviour of each layer in the protocol stack is not affected by the others. However, the fact that lower layers in the protocol stack model do not utilize information available from upper layers, and vice versa, downgrades the performance achieved. This is particularly relevant if multiple antenna systems, in a MIMO (Multiple Input Multiple Output) configuration, are implemented. MIMO schemes introduce another degree of freedom for radio resource allocation: the space domain. Contrary to the time and frequency domains, radio resources mapped into the spatial domain cannot be assumed as completely orthogonal, due to the amount of interference resulting from users transmitting in the same frequency sub-channel and/or time slots but in different spatial beams. Therefore, the availability of information regarding the state of radio resources, from lower to upper layers, is of fundamental importance in the prosecution of the levels of QoS expected from those multimedia applications. In order to match applications requirements and the constraints of the mobile radio channel, in the last few years researches have proposed a new paradigm for the layered architecture for communications: the cross-layer design framework. In a general way, the cross-layer design paradigm refers to a protocol design in which the dependence between protocol layers is actively exploited, by breaking out the stringent rules which restrict the communication only between adjacent layers in the original reference model, and allowing direct interaction among different layers of the stack. An efficient management of the set of available radio resources demand for the implementation of efficient and low complexity packet schedulers which prioritize user’s transmissions according to inputs provided from lower as well as upper layers in the protocol stack, fully compliant with the cross-layer design paradigm. Specifically, efficiently designed packet schedulers for 4G networks should result in the maximization of the capacity available, through the consideration of the limitations imposed by the mobile radio channel and comply with the set of QoS requirements from the application layer. IEEE 802.16e standard, also named as Mobile WiMAX, seems to comply with the specifications of 4G mobile networks. The scalable architecture, low cost implementation and high data throughput, enable efficient data multiplexing and low data latency, which are attributes essential to enable broadband data services. Also, the connection oriented approach of Its medium access layer is fully compliant with the quality of service demands from such applications. Therefore, Mobile WiMAX seems to be a promising 4G mobile wireless networks candidate. In this thesis it is proposed the investigation, design and implementation of packet scheduling algorithms for the efficient management of the set of available radio resources, in time, frequency and spatial domains of the Mobile WiMAX networks. The proposed algorithms combine input metrics from physical layer and QoS requirements from upper layers, according to the crosslayer design paradigm. Proposed schedulers are evaluated by means of system level simulations, conducted in a system level simulation platform implementing the physical and medium access control layers of the IEEE802.16e standard.

Rapid prototyping of ubiquitous computing environments

Ubiquitous computing raises new usability challenges that cut across design and development. We are particularly interested in environments enhanced with sensors, public displays and personal devices. How can prototypes be used to explore the users' mobility and interaction, both explicitly and implicitly, to access services within these environments? Because of the potential cost of development and design failure, these systems must be explored using early assessment techniques and versions of the systems that could disrupt if deployed in the target environment. These techniques are required to evaluate alternative solutions before making the decision to deploy the system on location. This is crucial for a successful development, that anticipates potential user problems, and reduces the cost of redesign. This thesis reports on the development of a framework for the rapid prototyping and analysis of ubiquitous computing environments that facilitates the evaluation of design alternatives. It describes APEX, a framework that brings together an existing 3D Application Server with a modelling tool. APEX-based prototypes enable users to navigate a virtual world simulation of the envisaged ubiquitous environment. By this means users can experience many of the features of the proposed design. Prototypes and their simulations are generated in the framework to help the developer understand how the user might experience the system. These are supported through three different layers: a simulation layer (using a 3D Application Server); a modelling layer (using a modelling tool) and a physical layer (using external devices and real users). APEX allows the developer to move between these layers to evaluate different features. It supports exploration of user experience through observation of how users might behave with the system as well as enabling exhaustive analysis based on models. The models support checking of properties based on patterns. These patterns are based on ones that have been used successfully in interactive system analysis in other contexts. They help the analyst to generate and verify relevant properties. Where these properties fail then scenarios suggested by the failure provide an important aid to redesign.

Implementação de processador banda base ofdma para downlink lte em fpga

This work treats of an implementation OFDMA baseband processor in hardware for LTE Downlink. The LTE or Long Term Evolution consist the last stage of development of the technology called 3G (Mobile System Third Generation) which offers an increasing in data rate and more efficiency and flexibility in transmission with application of advanced antennas and multiple carriers techniques. This technology applies in your physical layer the OFDMA technical (Orthogonal Frequency Division Multiple Access) for generation of signals and mapping of physical resources in downlink and has as base theoretical to OFDM multiple carriers technique (Orthogonal Frequency Division Multiplexing). With recent completion of LTE specifications, different hardware solutions have been developed, mainly, to the level symbol processing where the implementation of OFDMA processor in base band is commonly considered, because it is also considered a basic architecture of others important applications. For implementation of processor, the reconfigurable hardware offered by devices as FPGA are considered which shares not only to meet the high requirements of flexibility and adaptability of LTE as well as offers possibility of an implementation quick and efficient. The implementation of processor in reconfigurable hardware meets the specifications of LTE physical layer as well as have the flexibility necessary for to meet others standards and application which use OFDMA processor as basic architecture for your systems. The results obtained through of simulation and verification functional system approval the functionality and flexibility of processor implemented

Wavelength assignment using a hybrid evolutionary computation to reduce cross-phase modulation

In this paper, we propose a hybrid methodology based on Graph-Coloring and Genetic Algorithm (GA) to solve the Wavelength Assignment (WA) problem in optical networks, impaired by physical layer effects. Our proposal was developed for a static scenario where the physical topology and traffic matrix are known a priori. First, we used fixed shortest-path routing to attend demand requests over the physical topology and the graph-coloring algorithm to minimize the number of necessary wavelengths. Then, we applied the genetic algorithm to solve WA. The GA finds the wavelength activation order on the wavelengths grid with the aim of reducing the Cross-Phase Modulation (XPM) effect; the variance due to the XPM was used as a function of fitness to evaluate the feasibility of the selected WA solution. Its performance is compared with the First-Fit algorithm in two different scenarios, and has shown a reduction in blocking probability up to 37.14% when considered both XPM and residual dispersion effects and up to 71.42% when only considered XPM effect. Moreover, it was possible to reduce by 57.14% the number of wavelengths.

Políticas de alocação de espectro em roteamento baseado em balanceamento de cargas e fragmentação para redes ópticas elásticas

A natureza rígida de redes de multiplexação por divisão de comprimentos de onda (WDM) provoca exploração ineficiente de capacidade espectral. Dessa forma, redes flexíveis são um possível avanço para a tecnologia óptica por viabilizarem melhor aproveitamento dos recursos espectrais disponíveis. Com o intuito de aferir a possível aplicabilidade de redes flexíveis, este trabalho propõe uma estratégia de avaliação de desempenho baseada em simulações e comparações entre resultados obtidos. Para tanto, várias simulações a tempo discreto foram implementadas em dois simuladores desenvolvidos em Matlab a fim de analisar diferentes políticas de alocação de espectro (First-Fit, Smallest-Fit, Exact-Fit e Random-Fit) em três algoritmos de roteamento por caminhos ópticos não híbridos: o roteamento por fragmentação externa (FA), por caminhos mais curtos com máxima eficiência de reuso espectral (SPSR) e por balanceamento de cargas (BLSA). Duas topologias de rede foram utilizadas: um pequeno subconjunto de 6 nós da Cost239 e uma topologia aleatória de 7 nós. Admitindo-se que efeitos de camada física não foram configurados como restrições, foram realizadas comparações entre as diversas técnicas estudadas, objetivando-se apontar, baseado nas especificidades dos cenários propostos, qual o método mais adequado de alocação espectral em termos de frequência de bloqueio entre as quatro políticas de alocação de espectro consideradas.

WiMAX interoperabilidade mundial para acesso de microondas

This paper presents a technique dubbed WiMAX radio link, the IEEE 802.16 was completed in October 2001 and published on April 8, 2002 and is constantly updated, this technology specifies an interface for wireless metropolitan networks (WMAN) and is under control of the WiMAX Forum, which is a group of companies responsible for the dissipation of this technology in the world, the great benefit of this standard is to offer broadband Internet connection in areas where there is no infrastructure such as fiber optics that has a cost higher. The main purpose of this paper is to present the theoretical and technical characteristics of this technology for both the standard for fixed and mobile standard, regulation of frequency bands by the FCC and description of the physical layer, through to basic concepts are used in many other types of radio link and technologies have been adapted and updated for this little-known standard, allowing a greater range and speed, which are specified and differentiate these advancements is one of the contributions of the work done here. After the theoretical conceptualization stage, a real case study has been inserted in this work to demonstrate the effectiveness of this technology deployed. The idea of presenting this case study is linked to a better view of the use of standard in the market, nationwide