Waiver of statutory requirements : Property Agents and Motor Dealers Act 2000 (Qld)

One of the many difficulties associated with the drafting of the Property Agents and Motor Dealers Act 2000 (Qld) (‘the Act’) is the operation of s 365. If the requirements imposed by this section concerning the return of the executed contract are not complied with, the buyer and the seller will not be bound by the relevant contract and the cooling-off period will not commence. In these circumstances, it is clear that a buyer’s offer may be withdrawn. However, the drafting of the Act creates a difficulty in that the ability of the seller to withdraw from the transaction prior to the parties being bound by the contract is not expressly provided by s 365. On one view, if the buyer is able to withdraw an offer at any time before receiving the prescribed contract documentation the seller also should not be bound by the contract until this time, notwithstanding that the seller may have been bound at common law. However, an alternative analysis is that the legislative omission to provide the seller with a right of withdrawal may be deliberate given the statutory focus on buyer protection. If this analysis were correct the seller would be denied the right to withdraw from the transaction after the contract was formed at common law (that is, after the seller had signed and the fact of signing had been communicated to the buyer).

Assessment of requirements for establishment of a framework to enhance implementation of quality practices in building projects

Quality, in construction projects should be regarded as the fulfillment of expectation of those contributors involved in such projects. Although a significant amount of quality practices have been introduced within the industry, attainment of reasonable levels of quality in construction projects continues to be an ongoing problem. To date, some research into the introduction and improvement of quality practices and stakeholder management has been undertaken, but so far no major studies have been completed that comprehensively examine how greater consideration of stakeholders’ perspectives of quality can be used to contribute to final project quality outcomes. This paper aims to examine the requirements for development of a framework leading to more effective involvement of stakeholders in quality planning and practices thus ultimately contributing to higher quality outcomes for construction projects. Through an extensive literature review it highlights various perceptions of quality, categorizes quality issues with particular focus on benefits and shortcomings and also examines the viewpoints of major stakeholders on project quality. It proposes a set of criteria to be used as a basis for a quality practice improvement framework, which will provide project managers and owners with the required information and strategic direction to achieve their own and their stakeholders’ targets for implementation of quality practices leading to the achievement of improved quality outcomes on future projects.

Towards a unified service description language for the internet of services : requirements and first developments

Service-oriented Architectures (SOA) and Web services leverage the technical value of solutions in the areas of distributed systems and cross-enterprise integration. The emergence of Internet marketplaces for business services is driving the need to describe services, not only from a technical level, but also from a business and operational perspective. While, SOA and Web services reside in an IT layer, organizations owing Internet marketplaces are requiring advertising and trading business services which reside in a business layer. As a result, the gap between business and IT needs to be closed. This paper presents USDL (Unified Service Description Language), a specification language to describe services from a business, operational and technical perspective. USDL plays a major role in the Internet of Services to describe tradable services which are advertised in electronic marketplaces. The language has been tested using two service marketplaces as use cases.

Move it, use it : university-school collaboration for learning to teach physical education in primary schools

Reports of increasing numbers of obese Australian children and adolescents have raised the alarm to be proactive in reducing this so called epidemic. It has evoked a call for greater emphasis on teaching physical education in schools, as a measure for attaining fitness not only with obese students but for all students. This paper emphasises how preservice teachers need to be a key target for implementing physical education (PE) reform in schools, as many primary teachers will be generalists and may not be confident enough to implement PE effectively. Through a review of existing literature, teaching practices essential for the effective promotion and implementation of PE were identified under six broad categories: personal-professional skills development, addressing system requirements, pedagogical practices, managing student behaviour, providing feedback to students, and reflecting on practice. Subsequently, the development of these practices in preservice teachers is considered in the context of a university-school collaboration where preservice teachers taught physical education to primary school students for one day per week over a four week period. These authentic teaching experiences provided the preservice teachers with vital opportunities to put theory into practice and interact with “real-world” students. Self-evaluative data from 38 of these preservice teachers, in the form of a five-part Likert scale survey and extended response survey, demonstrated that they were able to develop the majority of the essential teaching practices identified by literature. In particular, the preservice teachers developed self efficacy, enthusiasm, and motivation for teaching PE, facets which are often found to be lacking in generalist primary teachers and yet are essential if children’s perceptions and habits regarding physical activity are to be changed.

Integrating organisational design with IT design : the Queensland Health payroll case

Most existing requirements engineering approaches focus on the modelling and specification of the IT artefacts ignoring the environment where the application is deployed. Although some requirements engineering approaches consider the stakeholder’s goals, they still focus on the IT artefacts’ specification. However, IT artefacts are embedded in a dynamic organisational environment and their design and specification cannot be separated from the environment’s constant evolution. Therefore, during the initial stages of a requirements engineering process it is advantageous to consider the integration of IT design with organisational design. We proposed the ADMITO (Analysis, Design and Management of IT and Organisations) approach to represent the dynamic relations between social and material entities, where the latter are divided into technological and organisational entities. In this paper we show how by using ADMITO in a concrete case, the Queensland Health Payroll (QHP) case, it is possible to have an integrated representation of IT and organisational design supporting organisational change and IT requirements specification.

Capping computation time and storage requirements for appearance-based localization with CAT-SLAM

Appearance-based localization is increasingly used for loop closure detection in metric SLAM systems. Since it relies only upon the appearance-based similarity between images from two locations, it can perform loop closure regardless of accumulated metric error. However, the computation time and memory requirements of current appearance-based methods scale linearly not only with the size of the environment but also with the operation time of the platform. These properties impose severe restrictions on longterm autonomy for mobile robots, as loop closure performance will inevitably degrade with increased operation time. We present a set of improvements to the appearance-based SLAM algorithm CAT-SLAM to constrain computation scaling and memory usage with minimal degradation in performance over time. The appearance-based comparison stage is accelerated by exploiting properties of the particle observation update, and nodes in the continuous trajectory map are removed according to minimal information loss criteria. We demonstrate constant time and space loop closure detection in a large urban environment with recall performance exceeding FAB-MAP by a factor of 3 at 100% precision, and investigate the minimum computational and memory requirements for maintaining mapping performance.

A review of medical image watermarking requirements for teleradiology

Teleradiology allows medical images to be transmitted over electronic networks for clinical interpretation, and for improved healthcare access, delivery and standards. Although, such remote transmission of the images is raising various new and complex legal and ethical issues, including image retention and fraud, privacy, malpractice liability, etc., considerations of the security measures used in teleradiology remain unchanged. Addressing this problem naturally warrants investigations on the security measures for their relative functional limitations and for the scope of considering them further. In this paper, starting with various security and privacy standards, the security requirements of medical images as well as expected threats in teleradiology are reviewed. This will make it possible to determine the limitations of the conventional measures used against the expected threats. Further, we thoroughly study the utilization of digital watermarking for teleradiology. Following the key attributes and roles of various watermarking parameters, justification for watermarking over conventional security measures is made in terms of their various objectives, properties, and requirements. We also outline the main objectives of medical image watermarking for teleradiology, and provide recommendations on suitable watermarking techniques and their characterization. Finally, concluding remarks and directions for future research are presented.

Molecular and structural requirements of the ß1L-adrenoceptor

Noradrenaline which occurs naturally in the body binds to beta-adrenoceptors on the heart, causing the heart to beat faster and with greater force in response to increased demand. This enables the heart to provide oxygenated blood to vital organs. Prolonged overstimulation by noradrenaline can be harmful to the heart and lead to the progression of heart disease. In these circumstances beta-adrenoceptors are blocked with drugs called beta-blockers. Beta-blockers block the effects of noradrenaline by binding to the same site on the beta-adrenoceptor. Some beta-blockers such as CGP12177 can also cause increases in heart rate. Therefore it was proposed that CGP12177 could bind in a different place to noradrenaline. The aim of this study was to determine where CGP12177 binds to on the beta-adrenoceptor. The results have revealed a separate binding site named beta-1-low. These results may lead to the development of improved -blockers for the management of heart conditions.

Data requirements and graph data structures for a multi-modal, multi-objective trip planner

Traffic congestion has a significant impact on the economy and environment. Encouraging the use of multimodal transport (public transport, bicycle, park’n’ride, etc.) has been identified by traffic operators as a good strategy to tackle congestion issues and its detrimental environmental impacts. A multi-modal and multi-objective trip planner provides users with various multi-modal options optimised on objectives that they prefer (cheapest, fastest, safest, etc) and has a potential to reduce congestion on both a temporal and spatial scale. The computation of multi-modal and multi-objective trips is a complicated mathematical problem, as it must integrate and utilize a diverse range of large data sets, including both road network information and public transport schedules, as well as optimising for a number of competing objectives, where fully optimising for one objective, such as travel time, can adversely affect other objectives, such as cost. The relationship between these objectives can also be quite subjective, as their priorities will vary from user to user. This paper will first outline the various data requirements and formats that are needed for the multi-modal multi-objective trip planner to operate, including static information about the physical infrastructure within Brisbane as well as real-time and historical data to predict traffic flow on the road network and the status of public transport. It will then present information on the graph data structures representing the road and public transport networks within Brisbane that are used in the trip planner to calculate optimal routes. This will allow for an investigation into the various shortest path algorithms that have been researched over the last few decades, and provide a foundation for the construction of the Multi-modal Multi-objective Trip Planner by the development of innovative new algorithms that can operate the large diverse data sets and competing objectives.

Setting aside default judgment - whether judgment regularly or irregularly entered - service under Corporations Act 2001 (Cth) s109X(1) - requirements for affadavit of service

In Hill v Robertson Suspension Systems Pty Ltd [2009] QDC 165 McGill DCJ considered the procedural requirements for the service of originating process on a company, and for proving that service for the purpose of obtaining default judgment.The judge’s views adopt a strict and technical construction of the requirements for an affidavit of service under r 120(1)(b). Though clearly obiter, they may well affect the approach taken on applications to enter or set aside default judgments in the lower courts. Pending further judicial consideration of the issue, it is suggested the prudent course is to ensure that the deponent of an affidavit for service effected under s 109X(1)(a) of the Act deposes not only to the location of the registered office of the company but also, at a minimum, provides the source of that information.

Vitamin C : effects of exercise and requirements with training

Ascorbic acid or vitamin C is involved in a number of biochemical pathways that are important to exercise metabolism and the health of exercising individuals. This review reports the results of studies investigating the requirement for vitamin C with exercise on the basis of dietary vitamin C intakes, the response to supplementation and alterations in plasma, serum, and leukocyte ascorbic acid concentration following both acute exercise and regular training. The possible physiological significance of changes in ascorbic acid with exercise is also addressed. Exercise generally causes a transient increase in circulating ascorbic acid in the hours following exercise, but a decline below pre-exercise levels occurs in the days after prolonged exercise. These changes could be associated with increased exercise-induced oxidative stress. On the basis of alterations in the concentration of ascorbic acid within the blood, it remains unclear if regular exercise increases the metabolism of vitamin C. However, the similar dietary intakes and responses to supplementation between athletes and nonathletes suggest that regular exercise does not increase the requirement for vitamin C in athletes. Two novel hypotheses are put forward to explain recent findings of attenuated levels of cortisol postexercise following supplementation with high doses of vitamin C.

Analyzing and defining information requirements of knowledge intensive construction management tasks on BIM

With the increasing popularity and adoption of building information modeling (BIM), the amount of digital information available about a building is overwhelming. Enormous challenges remain however in identifying meaningful and required information from a complex BIM model to support a particular construction management (CM) task. Detailed specifications of information required by different construction domains and expressive and easy-to-use BIM reasoning mechanisms are seen as an important means in addressing these challenges. This paper analyzes some of the characteristics and requirements of component-specific construction knowledge in relation to the current work practice and BIM-based applications. It is argued that domain ontologies and information extraction approaches, such as queries could significantly bring much needed support for knowledge sharing and integration of information between design, construction and facility management.

Australasian Torrens automation, its integrity, and the three proof requirements

New Zealand and Australia are leading the world in terms of automated land registry systems. Landonline was introduced some ten years ago for New Zealand, and the Electronic Conveyancing National Law (ECNL) is to be released over the next few years in support of a national electronic conveyancing system to be used throughout Australia. With the assistance of three proof requirements, developed for this purpose, this article measures the integrity of both systems as against the old, manual Torrens system. The authors take the position that any introduced system should at least have the same level of integrity and safety as the originally conceived manual system. The authors argue both Landonline and ECNL, as presently set up, have less credibility than the manual system as it was designed to operate, leading to the possibility of increased fraud or misuse.

Security and privacy in eHealth : is it possible? A sociotechnical analysis

Advances in Information and Communication Technologies have the potential to improve many facets of modern healthcare service delivery. The implementation of electronic health records systems is a critical part of an eHealth system. Despite the potential gains, there are several obstacles that limit the wider development of electronic health record systems. Among these are the perceived threats to the security and privacy of patients’ health data, and a widely held belief that these cannot be adequately addressed. We hypothesise that the major concerns regarding eHealth security and privacy cannot be overcome through the implementation of technology alone. Human dimensions must be considered when analysing the provision of the three fundamental information security goals: confidentiality, integrity and availability. A sociotechnical analysis to establish the information security and privacy requirements when designing and developing a given eHealth system is important and timely. A framework that accommodates consideration of the legislative requirements and human perspectives in addition to the technological measures is useful in developing a measurable and accountable eHealth system. Successful implementation of this approach would enable the possibilities, practicalities and sustainabilities of proposed eHealth systems to be realised.

Double standards in special medical research : questioning the discrepancy between requirements for medical research involving incompetent adults and medical research involving children

Medical research represents a substantial departure from conventional medical care. Medical care is patient-orientated, with decisions based on the best interests and/or wishes of the person receiving the care. In contrast, medical research is future-directed. Primarily it aims to contribute new knowledge about illness or disease, or new knowledge about interventions, such as drugs, that impact upon some human condition. Current State and Territory laws and research ethics guidelines in Australia relating to the review of medical research appropriately acknowledge that the functions of medical care and medical research differ. Prior to a medical research project commencing, the study must be reviewed and approved by a Human Research Ethics Committee (HREC). For medical research involving incompetent adults, some jurisdictions require an additional, independent safeguard by way of tribunal or court approval of medical research protocols. This extra review process reflects the uncertainty of medical research involvement, and the difficulties surrogate decision-makers of incompetent adults face in making decisions about others, and deliberating about the risks and benefits of research involvement. Parents of children also face the same difficulties when making decisions about their child’s research involvement. However, unlike the position concerning incompetent adults, there are no similar safeguards under Australian law in relation to the approval of medical research involving children. This column questions why this discrepancy exists with a view to generating further dialogue on the topic.