Electrochemistry of organometallic compounds. Part II. Oxidations of alkyl and aryl derivatives of bis(salicylaldehyde)ethylenediimine cobalt(III) in dimethylformamide

The influence of the axial organic ligand R on the electrochemical oxidation of the compounds [RCoIII(salen)DMF)], where salen is bis(salicylaldehyde)ethylenediimine, and R CH3, C2H5, n-C3H7, n-C4H9, s-C4H9, i-C4H9, CH2Cl, CF3CH2, c-C6H11CH2, c-C6H11, C6H5, C6H5CH2, p-CH3C6H4CH2, and p-NO2C6H4CH2, was studied by means of cyclic voltametry in dimethylformamide (DMF), 0.2 M in tetraethylammonium perchlorate (TEAP), at 25 and -20°C, with a platinum disc working electrode. The above-mentioned compounds can be classified according to their electrochemical behavior. (a) The complexes with R CH3, C2H5, n-C3H7, n-C4H9, c-C6H11CH2, and C6H5 undergo a reversible one-electron oxidation in the 10-50 V s-1 potential scan range. At slower scan rates, the oxidized product decomposes chemically. At -20°C, this chemical step is slow, and a reversible one-electron electrochemical oxidation is observed. (b) The compounds with R CH2Cl, C6H5CH2, p-CH3C6H4CH2 and p-NO2C6H4CH2 undergo a quasi-reversible one-electron oxidation at room temperaure. At -20°C, the electrochemical process becomes more complex. A following chemical reactions is coupled to the quasi-reversible one-electron transfer. Two reduction peaks are observed. (c) The compounds with R i-C4H9, s-C4H9, and c-C6H11 undergo a reversible one-electron oxidation at -20°C. At room temperature, the irreversible chemical reaction following the electron transfer step is too fast to allow the isolation of the electrochemical step. (d) At -20°C, the derivatives with R C2H5, c-C6H11 CH2 and c-C6H11 are adsorbed at the electrode surface. Evidence indicates that the reagent in these reactions is the pentacoordinated species [RCoIII(salen)]. A linear free-energy relationship between E1/2 (for reversible processes) and the Taft polar parameters o* was obtained with a slope of ρ* = 0.25 ± 0.03. As expected, the benzyl derivatives which present mesomeric effects do not fit this polar correlation. The rated of the electrochemical oxidation is also affected by the nature of the ligand R. For the ligands which are strong electron-withdrawing groups and for the benzyl derivatives, the rate of the electrochemical oxidation of the metal ion decreases at room temperature. At lower temperatures, it is suggested that the oxidation to the CoIV-R species is followed by a chemical reaction in which this complex is partly transformed into a CoIII(R*) species, which is reduced at a much more cathodic potential than the Co(IV) species. © 1979.

Why silver deposition is so fast: Solving the enigma of metal deposition

A perfect match: Silver deposition is one of the fastest electrochemical reactions, even though the Ag+ ion loses more than 5 eV solvation energy in the process. This phenomenon, an example of the enigma of metal deposition, was investigated by a combination of MD simulations, DFT, and specially developed theory. At the surface, the Ag+ ion experiences a strong interaction with the sp band of silver, which catalyzes the reaction. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Análise de geradores piezelétricos acoplados com circuitos retificadores operando em regime caótico

Pós-graduação em Engenharia Mecânica - FEIS

Projeto de controladores para a maximização de sistemas de captação de energia considerando excitação não ideal

Pós-graduação em Engenharia Mecânica - FEIS

Triboelectricity: Macroscopic Charge Patterns Formed by Self-Arraying Ions on Polymer Surfaces

Tribocharged polymers display macroscopically patterned positive and negative domains, verifying the fractal geometry of electrostatic mosaics previously detected by electric probe microscopy. Excess charge on contacting polyethylene (PE) and polytetrafluoroethylene (PTFE) follows the triboelectric series but with one caveat: net charge is the arithmetic sum of patterned positive and negative charges, as opposed to the usual assumption of uniform but opposite signal charging on each surface. Extraction with n-hexane preferentially removes positive charges from PTFE, while 1,1-difluoroethane and ethanol largely remove both positive and negative charges. Using suitable analytical techniques (electron energy-loss spectral imaging, infrared microspectrophotometry and carbonization/colorimetry) and theoretical calculations, the positive species were identified as hydrocarbocations and the negative species were identified as fluorocarbanions. A comprehensive model is presented for PTFE tribocharging with PE: mechanochemical chain homolytic rupture is followed by electron transfer from hydrocarbon free radicals to the more electronegative fluorocarbon radicals. Polymer ions self-assemble according to Flory-Huggins theory, thus forming the experimentally observed macroscopic patterns. These results show that tribocharging can only be understood by considering the complex chemical events triggered by mechanical action, coupled to well-established physicochemical concepts. Patterned polymers can be cut and mounted to make macroscopic electrets and multipoles.

Bioinformatische Identifizierung und Charakterisierung von Zyklin-abhängigen Kinasen und Zyklinen des Parasiten Eimeria tenella und deren Nutzung im rationalen Wirkstoffdesign

Parasiten der Apicomplexa umfassen sowohl humanpathogene, als auch tierpathogene Protozoen. Beispiele für wichtige Vertreter human- und tierpathogener Parasiten sind Plasmodium falciparum und Eimeria tenella. E. tenella verursacht die Kokzidiose des Hühnchens, eine Darmerkrankung die weltweit für Verluste in einer geschätzten Höhe von bis zu 3 Milliarden US$ verantwortlich zeichnet. Eine prophylaktische Vakzinierung gegen diese Krankheit ist ökonomisch meist ineffizient, und eine Behandlung mit Kokzidiostatika wird durch häufige Resistenzbildung gegen bekannte Wirkstoffe erschwert. Diese Situation erfordert die Entwicklung neuer kostengünstiger Alternativen. Geeignete Zielproteine für die Entwicklung neuartiger Arzneistoffe zur Behandlung der Kokzidiose sind die Zyklin-abhängigen Kinasen (CDKs), zu denen auch die CDK-related Kinase 2 (EtCRK2) aus E. tenella gehört. Diese Proteine sind maßgeblich an der Regulation des Zellzyklus beteiligt. Durch chemische Validierung mit dem CDK Inhibitor Flavopiridol konnte nachgewiesen werden, dass ein Funktionsverlust von CDKs in E. tenella die Vermehrung des Parasiten in Zellkultur inhibiert. E. tenella CDKs sind daher als Zielproteine für die Entwicklung einer Chemotherapie der Kokzidiose geeignet. Mittels bioinformatischer Tiefenanalysen sollten CDK Proteine im Parasiten E. tenella identifiziert werden. Das Genom von E. tenella liegt in Rohfassung vor [ftp://ftp.sanger.ac.uk]. Jedoch waren zum Zeitpunkt dieser Arbeiten viele Sequenzen des Genoms noch nicht annotiert. Homologe CDK Proteine von E. tenella konnten durch den Vergleich von Sequenzinformationen mit anderen Organismen der Apicomplexa identifiziert und analysiert werden. Durch diese Analysen konnten neben der bereits bekannten EtCRK2, drei weitere, bislang nicht annotierte CDKs in E. tenella identifiziert werden (EtCRK1, EtCRK3 sowie EtMRK). Darüber hinaus wurde eine Analyse der entsprechenden Zykline – der Aktivatoren der CDKs – bezüglich Funktion und Struktur, sowie eine Datenbanksuche nach bisher nicht beschriebenen Zyklinen in E. tenella durchgeführt. Diese Suchen ergaben vier neue potentielle Zykline für E. tenella, wovon EtCYC3a als Aktivator der EtCRK2 von María L. Suárez Fernández (Intervet Innovation GmbH, Schwabenheim) bestätigt werden konnte. Sequenzvergleiche lassen vermuten, dass auch EtCYC1 und EtCYC3b in der Lage sind, EtCRK2 zu aktivieren. Außerdem ist anzunehmen, dass EtCYC4 als Aktivator der EtCRK1 fungiert. Ein weiterer Schwerpunkt der vorliegenden Arbeit war die Suche und Optimierung nach neuen Inhibitoren von CDKs aus E. tenella. In vorangegangenen Arbeiten konnten bereits Inhibitoren der EtCRK2 gefunden werden [BEYER, 2007]. Mittels Substruktur- und Ähnlichkeitssuchen konnten im Rahmen dieser Arbeit weitere Inhibitoren der EtCRK2 identifiziert werden. Vier dieser Strukturklassen erfüllen die Kriterien einer Leitstruktur. Eine dieser Leitstrukturen gehört zur Strukturklasse der Benzimidazol-Carbonitrile und ist bislang nicht als Inhibitor anderer Kinasen beschrieben. Diese neu identifizierte Leitstruktur konnte in silico weiter optimiert werden. Im Rahmen dieser Arbeit wurden Bindungsenergien von Vertretern dieser Strukturklasse berechnet, um einen wahrscheinlichen Bindemodus vorherzusagen. Für die weiterführende in silico Optimierung wurde eine virtuelle kombinatorische Substanzbibliothek dieser Klasse erstellt. Die Auswahl geeigneter Verbindungen für eine chemische Synthese erfolgte durch molekulares Docking unter Nutzung von Homologiemodellen der EtCRK2. Darüber hinaus wurde ein in silico Screening nach potentiellen Inhibitoren der PfMRK und EtMRK durchgeführt. Dabei konnten weitere interessante virtuelle Hit-Strukturen aus einer Substanzdatenbank kommerziell erhältlicher Verbindungen gefunden werden. Durch dieses virtuelle Screening konnten jeweils sieben Verbindungen als virtuelle Hits der PfMRK sowie der EtMRK identifiziert werden. Die Häufung von Strukturklassen mit bekannter CDK Aktivität deutet darauf hin, dass während des virtuellen Screenings eine Anreicherung von CDK Inhibitoren stattgefunden hat. Diese Ergebnisse lassen auf eine Weiterentwicklung neuer Wirkstoffe gegen Kokzidiose und Malaria hoffen.

Motzkin Decomposable Sets

Theodore Motzkin proved, in 1936, that any polyhedral convex set can be expressed as the (Minkowski) sum of a polytope and a polyhedral convex cone. We have provided several characterizations of the larger class of closed convex sets, Motzkin decomposable, in finite dimensional Euclidean spaces which are the sum of a compact convex set with a closed convex cone. These characterizations involve different types of representations of closed convex sets as the support functions, dual cones and linear systems whose relationships are also analyzed. The obtaining of information about a given closed convex set F and the parametric linear optimization problem with feasible set F from each of its different representations, including the Motzkin decomposition, is also discussed. Another result establishes that a closed convex set is Motzkin decomposable if and only if the set of extreme points of its intersection with the linear subspace orthogonal to its lineality is bounded. We characterize the class of the extended functions whose epigraphs are Motzkin decomposable sets showing, in particular, that these functions attain their global minima when they are bounded from below. Calculus of Motzkin decomposable sets and functions is provided.

Magnetic properties of the oceanic igneous rocks (Table 1)

Hysteresis measurements have been carried out on a suite of ocean-floor basalts with ages ranging from Quaternary to Cretaceous. Approximately linear, yet separate, relationships between coercivity (Bc) and the ratio of saturation remanence/saturation magnetization (Mrs/Ms) are observed for massive doleritic basalts with low-Ti magnetite and for pillow basalts with multi-domain titanomagnetites (with x= 0.6). Even when the MORB has undergone lowtemperature oxidation resulting in titanomaghemite, the parameters are still distinguishable, although offset from the trend for unoxidized multidomain titanomagnetite. The parameters for these iron oxides with different titanium content reveal contrasting trends that can be explained by the different saturation magnetizations of the mineral types. This plot provides a previously underutilized and non-destructive method to detect the presence of low-titanium magnetite in igneous rocks, notably MORB.

Ação de anestésicos gerais em canais iônicos

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Departamento de Biologia Molecular, 2016.

Effects of rock properties on specific cutting energy in linear cutting of sandstones by picks

Specific cutting energy (SE) has been widely used to assess the rock cuttability for mechanical excavation purposes. Some prediction models were developed for SE through correlating rock properties with SE values. However, some of the textural and compositional rock parameters i.e. texture coefficient and feldspar, mafic, and felsic mineral contents were not considered. The present study is to investigate the effects of previously ignored rock parameters along with engineering rock properties on SE. Mineralogical and petrographic analyses, rock mechanics, and linear rock cutting tests were performed on sandstone samples taken from sites around Ankara, Turkey. Relationships between SE and rock properties were evaluated using bivariate correlation and linear regression analyses. The tests and subsequent analyses revealed that the texture coefficient and feldspar content of sandstones affected rock cuttability, evidenced by significant correlations between these parameters and SE at a 90% confidence level. Felsic and mafic mineral contents of sandstones did not exhibit any statistically significant correlation against SE. Cementation coefficient, effective porosity, and pore volume had good correlations against SE. Poisson's ratio, Brazilian tensile strength, Shore scleroscope hardness, Schmidt hammer hardness, dry density, and point load strength index showed very strong linear correlations against SE at confidence levels of 95% and above, all of which were also found suitable to be used in predicting SE individually, depending on the results of regression analysis, ANOVA, Student's t-tests, and R2 values. Poisson's ratio exhibited the highest correlation with SE and seemed to be the most reliable SE prediction tool in sandstones.

Effects of rock properties on specific cutting energy in linear cutting of sandstones by picks

Specific cutting energy (SE) has been widely used to assess the rock cuttability for mechanical excavation purposes. Some prediction models were developed for SE through correlating rock properties with SE values. However, some of the textural and compositional rock parameters i.e. texture coefficient and feldspar, mafic, and felsic mineral contents were not considered. The present study is to investigate the effects of previously ignored rock parameters along with engineering rock properties on SE. Mineralogical and petrographic analyses, rock mechanics, and linear rock cutting tests were performed on sandstone samples taken from sites around Ankara, Turkey. Relationships between SE and rock properties were evaluated using bivariate correlation and linear regression analyses. The tests and subsequent analyses revealed that the texture coefficient and feldspar content of sandstones affected rock cuttability, evidenced by significant correlations between these parameters and SE at a 90% confidence level. Felsic and mafic mineral contents of sandstones did not exhibit any statistically significant correlation against SE. Cementation coefficient, effective porosity, and pore volume had good correlations against SE. Poisson's ratio, Brazilian tensile strength, Shore scleroscope hardness, Schmidt hammer hardness, dry density, and point load strength index showed very strong linear correlations against SE at confidence levels of 95% and above, all of which were also found suitable to be used in predicting SE individually, depending on the results of regression analysis, ANOVA, Student's t-tests, and R-2 values. Poisson's ratio exhibited the highest correlation with SE and seemed to be the most reliable SE prediction tool in sandstones.

A practical method of estimating energy expenditure during tennis play

This study aimed to develop a practical method of estimating energy expenditure (EE) during tennis. Twenty-four elite female tennis players first completed a tennis-specific graded test in which five different intensity levels were applied randomly. Each intensity level was intended to simulate a game of singles tennis and comprised six 14 s periods of activity alternated with 20 s of active rest. Oxygen consumption (VO2) and heart rate (HR) were measured continuously and each player's rate of perceived exertion (RPE) was recorded at the end of each intensity level. Rate of energy expenditure (EEVO2) during the test was calculated using the sum of VO2 during play and the 'O-2 debt' during recovery, divided by the duration of the activity. There were significant individual linear relationships between EEVO2 and RPE, EEVO2 and HR, (rgreater than or equal to0.89 rgreater than or equal to0.93; p

Use of quantitative structure-property relationships to study the solvation process of 18-crown-6

Solution enthalpies of 18-crown-6 have been obtained for a set of 14 protic and aprotic solvents at 298.15 K. The complementary use of Solomonov's methodology and a QSPR-based approach allowed the identification of the most significant solvent descriptors that model the interaction enthalpy contribution of the solution process (Delta H-int(A/S)). Results were compared with data previously obtained for 1,4-dioxane. Although the interaction enthalpies of 18-crown-6 correlate well with those of 1,4-dioxane, the magnitude of the most relevant parameters, pi* and beta, is almost three times higher for 18-crown-6. This is rationalized in terms of the impact of the solute's volume in the solution processes of both compounds. (C) 2015 Elsevier B.V. All rights reserved.

Protein-ligand binding free energy estimation using molecular mechanics and continuum electrostatics. Application to HIV-1 protease inhibitors.

A method is proposed for the estimation of absolute binding free energy of interaction between proteins and ligands. Conformational sampling of the protein-ligand complex is performed by molecular dynamics (MD) in vacuo and the solvent effect is calculated a posteriori by solving the Poisson or the Poisson-Boltzmann equation for selected frames of the trajectory. The binding free energy is written as a linear combination of the buried surface upon complexation, SASbur, the electrostatic interaction energy between the ligand and the protein, Eelec, and the difference of the solvation free energies of the complex and the isolated ligand and protein, deltaGsolv. The method uses the buried surface upon complexation to account for the non-polar contribution to the binding free energy because it is less sensitive to the details of the structure than the van der Waals interaction energy. The parameters of the method are developed for a training set of 16 HIV-1 protease-inhibitor complexes of known 3D structure. A correlation coefficient of 0.91 was obtained with an unsigned mean error of 0.8 kcal/mol. When applied to a set of 25 HIV-1 protease-inhibitor complexes of unknown 3D structures, the method provides a satisfactory correlation between the calculated binding free energy and the experimental pIC5o without reparametrization.

Linear prediction application for modelling the relationships between a large number of stand characteristics of Norway spruce stands

Abstract