974 resultados para linear motor


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Die vorliegende Arbeit beschäftigt sich mit den Einflüssen visuell wahrgenommener Bewegungsmerkmale auf die Handlungssteuerung eines Beobachters. Im speziellen geht es darum, wie die Bewegungsrichtung und die Bewegungsgeschwindigkeit als aufgabenirrelevante Reize die Ausführung von motorischen Reaktionen auf Farbreize beeinflussen und dabei schnellere bzw. verzögerte Reaktionszeiten bewirken. Bisherige Studien dazu waren auf lineare Bewegungen (von rechts nach links und umgekehrt) und sehr einfache Reizumgebungen (Bewegungen einfacher geometrischer Symbole, Punktwolken, Lichtpunktläufer etc.) begrenzt (z.B. Ehrenstein, 1994; Bosbach, 2004, Wittfoth, Buck, Fahle & Herrmann, 2006). In der vorliegenden Dissertation wurde die Gültigkeit dieser Befunde für Dreh- und Tiefenbewegungen sowie komplexe Bewegungsformen (menschliche Bewegungsabläufe im Sport) erweitert, theoretisch aufgearbeitet sowie in einer Serie von sechs Reaktionszeitexperimenten mittels Simon-Paradigma empirisch überprüft. Allen Experimenten war gemeinsam, dass Versuchspersonen an einem Computermonitor auf einen Farbwechsel innerhalb des dynamischen visuellen Reizes durch einen Tastendruck (links, rechts, proximal oder distal positionierte Taste) reagieren sollten, wobei die Geschwindigkeit und die Richtung der Bewegungen für die Reaktionen irrelevant waren. Zum Einfluss von Drehbewegungen bei geometrischen Symbolen (Exp. 1 und 1a) sowie bei menschlichen Drehbewegungen (Exp. 2) zeigen die Ergebnisse, dass Probanden signifikant schneller reagieren, wenn die Richtungsinformationen einer Drehbewegung kompatibel zu den räumlichen Merkmalen der geforderten Tastenreaktion sind. Der Komplexitätsgrad des visuellen Ereignisses spielt dabei keine Rolle. Für die kognitive Verarbeitung des Bewegungsreizes stellt nicht der Drehsinn, sondern die relative Bewegungsrichtung oberhalb und unterhalb der Drehachse das entscheidende räumliche Kriterium dar. Zum Einfluss räumlicher Tiefenbewegungen einer Kugel (Exp. 3) und einer gehenden Person (Exp. 4) belegen unsere Befunde, dass Probanden signifikant schneller reagieren, wenn sich der Reiz auf den Beobachter zu bewegt und ein proximaler gegenüber einem distalen Tastendruck gefordert ist sowie umgekehrt. Auch hier spielt der Komplexitätsgrad des visuellen Ereignisses keine Rolle. In beiden Experimenten führt die Wahrnehmung der Bewegungsrichtung zu einer Handlungsinduktion, die im kompatiblen Fall eine schnelle und im inkompatiblen Fall eine verzögerte Handlungsausführung bewirkt. In den Experimenten 5 und 6 wurden die Einflüsse von wahrgenommenen menschlichen Laufbewegungen (freies Laufen vs. Laufbandlaufen) untersucht, die mit und ohne eine Positionsveränderung erfolgten. Dabei zeigte sich, dass unabhängig von der Positionsveränderung die Laufgeschwindigkeit zu keiner Modulation des richtungsbasierten Simon Effekts führt. Zusammenfassend lassen sich die Studienergebnisse gut in effektbasierte Konzepte zur Handlungssteuerung (z.B. die Theorie der Ereigniskodierung von Hommel et al., 2001) einordnen. Weitere Untersuchungen sind nötig, um diese Ergebnisse auf großmotorische Reaktionen und Displays, die stärker an visuell wahrnehmbaren Ereignissen des Sports angelehnt sind, zu übertragen.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objective. Assimilating the diagnosis complete spinal cord injury (SCI) takes time and is not easy, as patients know that there is no ‘cure’ at the present time. Brain–computer interfaces (BCIs) can facilitate daily living. However, inter-subject variability demands measurements with potential user groups and an understanding of how they differ to healthy users BCIs are more commonly tested with. Thus, a three-class motor imagery (MI) screening (left hand, right hand, feet) was performed with a group of 10 able-bodied and 16 complete spinal-cord-injured people (paraplegics, tetraplegics) with the objective of determining what differences were present between the user groups and how they would impact upon the ability of these user groups to interact with a BCI. Approach. Electrophysiological differences between patient groups and healthy users are measured in terms of sensorimotor rhythm deflections from baseline during MI, electroencephalogram microstate scalp maps and strengths of inter-channel phase synchronization. Additionally, using a common spatial pattern algorithm and a linear discriminant analysis classifier, the classification accuracy was calculated and compared between groups. Main results. It is seen that both patient groups (tetraplegic and paraplegic) have some significant differences in event-related desynchronization strengths, exhibit significant increases in synchronization and reach significantly lower accuracies (mean (M) = 66.1%) than the group of healthy subjects (M = 85.1%). Significance. The results demonstrate significant differences in electrophysiological correlates of motor control between healthy individuals and those individuals who stand to benefit most from BCI technology (individuals with SCI). They highlight the difficulty in directly translating results from healthy subjects to participants with SCI and the challenges that, therefore, arise in providing BCIs to such individuals

Relevância:

30.00% 30.00%

Publicador:

Resumo:

OBJECTIVE: Assimilating the diagnosis complete spinal cord injury (SCI) takes time and is not easy, as patients know that there is no 'cure' at the present time. Brain-computer interfaces (BCIs) can facilitate daily living. However, inter-subject variability demands measurements with potential user groups and an understanding of how they differ to healthy users BCIs are more commonly tested with. Thus, a three-class motor imagery (MI) screening (left hand, right hand, feet) was performed with a group of 10 able-bodied and 16 complete spinal-cord-injured people (paraplegics, tetraplegics) with the objective of determining what differences were present between the user groups and how they would impact upon the ability of these user groups to interact with a BCI. APPROACH: Electrophysiological differences between patient groups and healthy users are measured in terms of sensorimotor rhythm deflections from baseline during MI, electroencephalogram microstate scalp maps and strengths of inter-channel phase synchronization. Additionally, using a common spatial pattern algorithm and a linear discriminant analysis classifier, the classification accuracy was calculated and compared between groups. MAIN RESULTS: It is seen that both patient groups (tetraplegic and paraplegic) have some significant differences in event-related desynchronization strengths, exhibit significant increases in synchronization and reach significantly lower accuracies (mean (M) = 66.1%) than the group of healthy subjects (M = 85.1%). SIGNIFICANCE: The results demonstrate significant differences in electrophysiological correlates of motor control between healthy individuals and those individuals who stand to benefit most from BCI technology (individuals with SCI). They highlight the difficulty in directly translating results from healthy subjects to participants with SCI and the challenges that, therefore, arise in providing BCIs to such individuals.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objective To investigate if a home environment test battery can be used to measure effects of Parkinson’s disease (PD) treatment intervention and disease progression. Background Seventy-seven patients diagnosed with advanced PD were recruited in an open longitudinal 36-month study at 10 clinics in Sweden and Norway; 40 of them were treated with levodopa-carbidopa intestinal gel (LCIG) and 37 patients were candidates for switching from oral PD treatment to LCIG. They utilized a mobile device test battery, consisting of self-assessments of symptoms and objective measures of motor function through a set of fine motor tests (tapping and spiral drawings), in their homes. Both the LCIG-naïve and LCIG-non-naïve patients used the test battery four times per day during week-long test periods. Methods Assessments The LCIG-naïve patients used the test battery at baseline (before LCIG), month 0 (first visit; at least 3 months after intraduodenal LCIG), and thereafter quarterly for the first year and biannually for the second and third years. The LCIG-non-naïve patients used the test battery from the first visit, i.e. month 0. Out of the 77 patients, only 65 utilized the test battery; 35 were LCIG-non-naïve and 30 LCIG-naïve. In 20 of the LCIG-naïve patients, assessments with the test battery were available during oral treatment and at least one test period after having started infusion treatment. Three LCIG-naïve patients did not use the test battery at baseline but had at least one test period of assessments thereafter. Hence, n=23 in the LCIG-naïve group. In total, symptom assessments in the full sample (including both patient groups) were collected during 379 test periods and 10079 test occasions. For 369 of these test periods, clinical assessments including UPDRS and PDQ-39 were performed in afternoons at the start of the test periods. The repeated measurements of the test battery were processed and summarized into scores representing patients’ symptom severities over a test period, using statistical methods. Six conceptual dimensions were defined; four subjectively-reported: ‘walking’, ‘satisfied’, ‘dyskinesia’, and ‘off’ and two objectively-measured: ‘tapping’ and ‘spiral’. In addition, an ‘overall test score’ (OTS) was defined to represent the global health condition of the patient during a test period. Statistical methods Change in the test battery scores over time, that is at baseline and follow-up test periods, was assessed with linear mixed-effects models with patient ID as a random effect and test period as a fixed effect of interest. The within-patient variability of OTS was assessed using intra-class correlation coefficient (ICC), for the two patient groups. Correlations between clinical rating scores and test battery scores were assessed using Spearman’s rank correlations (rho). Results In LCIG-naïve patients, mean OTS compared to baseline was significantly improved from the first test period on LCIG treatment until month 24. However, there were no significant changes in mean OTS scores of LCIG-non-naïve patients, except for worse mean OTS at month 36 (p<0.01, n=16). The mean scores of all subjectively-reported dimensions improved significantly throughout the course of the study, except ‘walking’ at month 36 (p=0.41, n=4). However, there were no significant differences in mean scores of objectively-measured dimensions between baseline and other test periods, except improved ‘tapping’ at month 6 and month 36, and ‘spiral’ at month 3 (p<0.05). The LCIG-naïve patients had a higher within-subject variability in their OTS scores (ICC=0.67) compared to LCIG-non-naïve patients (ICC=0.71). The OTS correlated adequately with total UPDRS (rho=0.59) and total PDQ-39 (rho=0.59). Conclusions In this 3-year follow-up study of advanced PD patients treated with LCIG we found that it is possible to monitor PD progression over time using a home environment test battery. The significant improvements in the mean OTS scores indicate that the test battery is able to measure functional improvement with LCIG sustained over at least 24 months.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

OBJECTIVES: To develop a method for objective assessment of fine motor timing variability in Parkinson’s disease (PD) patients, using digital spiral data gathered by a touch screen device. BACKGROUND: A retrospective analysis was conducted on data from 105 subjects including65 patients with advanced PD (group A), 15 intermediate patients experiencing motor fluctuations (group I), 15 early stage patients (group S), and 10 healthy elderly subjects (HE) were examined. The subjects were asked to perform repeated upper limb motor tasks by tracing a pre-drawn Archimedes spiral as shown on the screen of the device. The spiral tracing test was performed using an ergonomic pen stylus, using dominant hand. The test was repeated three times per test occasion and the subjects were instructed to complete it within 10 seconds. Digital spiral data including stylus position (x-ycoordinates) and timestamps (milliseconds) were collected and used in subsequent analysis. The total number of observations with the test battery were as follows: Swedish group (n=10079), Italian I group (n=822), Italian S group (n = 811), and HE (n=299). METHODS: The raw spiral data were processed with three data processing methods. To quantify motor timing variability during spiral drawing tasks Approximate Entropy (APEN) method was applied on digitized spiral data. APEN is designed to capture the amount of irregularity or complexity in time series. APEN requires determination of two parameters, namely, the window size and similarity measure. In our work and after experimentation, window size was set to 4 and similarity measure to 0.2 (20% of the standard deviation of the time series). The final score obtained by APEN was normalized by total drawing completion time and used in subsequent analysis. The score generated by this method is hence on denoted APEN. In addition, two more methods were applied on digital spiral data and their scores were used in subsequent analysis. The first method was based on Digital Wavelet Transform and Principal Component Analysis and generated a score representing spiral drawing impairment. The score generated by this method is hence on denoted WAV. The second method was based on standard deviation of frequency filtered drawing velocity. The score generated by this method is hence on denoted SDDV. Linear mixed-effects (LME) models were used to evaluate mean differences of the spiral scores of the three methods across the four subject groups. Test-retest reliability of the three scores was assessed after taking mean of the three possible correlations (Spearman’s rank coefficients) between the three test trials. Internal consistency of the methods was assessed by calculating correlations between their scores. RESULTS: When comparing mean spiral scores between the four subject groups, the APEN scores were different between HE subjects and three patient groups (P=0.626 for S group with 9.9% mean value difference, P=0.089 for I group with 30.2%, and P=0.0019 for A group with 44.1%). However, there were no significant differences in mean scores of the other two methods, except for the WAV between the HE and A groups (P<0.001). WAV and SDDV were highly and significantly correlated to each other with a coefficient of 0.69. However, APEN was not correlated to neither WAV nor SDDV with coefficients of 0.11 and 0.12, respectively. Test-retest reliability coefficients of the three scores were as follows: APEN (0.9), WAV(0.83) and SD-DV (0.55). CONCLUSIONS: The results show that the digital spiral analysis-based objective APEN measure is able to significantly differentiate the healthy subjects from patients at advanced level. In contrast to the other two methods (WAV and SDDV) that are designed to quantify dyskinesias (over-medications), this method can be useful for characterizing Off symptoms in PD. The APEN was not correlated to none of the other two methods indicating that it measures a different construct of upper limb motor function in PD patients than WAV and SDDV. The APEN also had a better test-retest reliability indicating that it is more stable and consistent over time than WAV and SDDV.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O objetivo desta pesquisa, de delineamento quase-experimental, foi verificar a influência de um Programa de Intervenção Motora Inclusiva (PIMI) no desenvolvimento motor (DM) e social (DS) de crianças, portadoras (PNEE) e não portadoras de necessidades educacionais especiais (n-PNEE), com atrasos motores. A amostra desta pesquisa foi não probabilística, intencional, composta por 76 crianças (43 meninos e 33 meninas), com idades de 4 a 10 anos (M=7,00, DP=1,44), sendo 24 (31,6%) crianças PNEE e 52 (68,4%) crianças n-PNEE, que apresentaram desempenho motores inferiores a seus pares, configurando atrasos motores, avaliados por meio do Test of Gross Motor Development- 2 (TGMD-2) (ULRICH, 2000). Trinta e cinco crianças constituíram o Grupo de Intervenção (GI) e quarenta e uma crianças constituíram o Grupo Controle (GC). Para a avaliação do DM das crianças dos grupos foi utilizado o TGMD-2 e para a avaliação do DS das crianças do GI foi utilizado a estrutura de Níveis de Responsabilidade Social e Pessoal (HELLISON, 2003). O PIMI foi desenvolvido em 14 semanas, implementando os princípios do Contexto Motivacional para a Maestria e os pressupostos da estrutura TARGET. General Linear Model com medidas repetidas no fator tempo foi conduzida para avaliar os efeitos do PIMI no DM das crianças. Para a análise do DS foi utilizado o teste de Friedman. Os resultados indicaram que (1) crianças, PNEE e n- PNEE, do GI demonstraram ganhos significantes em habilidades de locomoção e de controle de objeto do pré-teste para o pós-teste, enquanto que para as crianças, PNEE e n-PNEE, do GC mudanças significativas não foram encontradas, (2) crianças, PNEE e n-PNEE, do GI demonstraram desempenho significantemente superior em habilidades de locomoção e de controle de objeto comparadas as crianças, PNEE e n-PNEE, do GC no pós-teste, (3) crianças PNEE, do GI, demonstraram padrões de mudanças positivas e significativas do pré-teste para o pós-teste nas habilidades de locomoção e de controle de objeto semelhantes aos seus pares n-PNE do mesmo grupo, (4) crianças PNEE, do GI, demonstraram no pós-teste desempenho significantemente superior nas habilidades de locomoção e controle de objetos comparadas aos seus pares PNEE do GC, (5) crianças n-PNEE, do GI, demonstraram no pós-teste desempenho significantemente superior nas habilidades de locomoção e de controle de objeto comparadas aos seus pares n-PNEE do GC, (6) crianças, PNEE e n-PNEE, do GI, demonstraram mudanças positivas e significativas no DS no contexto de aprendizagem por meio da conquista de níveis de responsabilidade social e pessoal mais elevados, no decorrer do PIMI, (7) crianças PNEE, do GI, demonstraram padrões de mudanças positivas e significativas no DS semelhantes aos seus pares n-PNEE do mesmo grupo. E mais, a implementação do Contexto Motivacional para a Maestria possibilitou a participação cooperativa e efetiva de todas as crianças indiferentemente dos níveis de habilidade motora.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The present work is based on the applied bilinear predictive control applied to an induction motor. As in particular case of the technique based on predictive control in nonlinem systems, these have desperted great interest, a time that present the advantage of being simpler than the non linear in general and most representative one than the linear one. One of the methods, adopted here, uses the linear model "quasi linear for step of time" based in Generalized Predictive Control. The modeling of the induction motor is made by the Vectorial control with orientation given for the indirect rotor. The system is formed by an induction motor of 3 cv with rotor in squirregate, set in motion for a group of benches of tests developed for this work, presented resulted for a variation of +5% in the value of set-point and for a variation of +10% and -10% in the value of the applied nominal load to the motor. The results prove a good efficiency of the predictive bilinear controllers, then compared with the linear cases

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The present work describes the use of a mathematical tool to solve problems arising from control theory, including the identification, analysis of the phase portrait and stability, as well as the temporal evolution of the plant s current induction motor. The system identification is an area of mathematical modeling that has as its objective the study of techniques which can determine a dynamic model in representing a real system. The tool used in the identification and analysis of nonlinear dynamical system is the Radial Basis Function (RBF). The process or plant that is used has a mathematical model unknown, but belongs to a particular class that contains an internal dynamics that can be modeled.Will be presented as contributions to the analysis of asymptotic stability of the RBF. The identification using radial basis function is demonstrated through computer simulations from a real data set obtained from the plant

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In this work, we use a nonlinear control based on Optimal Linear Control. We used as mathematical model a Duffing equation to model a supporting structure for an unbalanced rotating machine with limited power (non-ideal motor). Numerical simulations are performed for a set control parameter (depending on the voltage of the motor, that is, in the static and dynamic characteristic of the motor) The interaction of the non-ideal excitation with the structure may lead to the occurrence of interesting phenomena during the forward passage through the several resonance states of the system. Chaotic behavior is obtained for values of the parameters. Then, the proposed control strategy is applied in order to regulate the chaotic behavior, in order to obtain a periodic orbit and to decrease its amplitude. Both methodologies were used in complete agreement between them. The purpose of the paper is to give suggestions and recommendations to designers and engineers on how to drive this kind of system through resonance.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In this paper, a load transportation system in platforms or suspended by cables is considered. It is a monorail device and is modelled as an inverted pendulum built on a car driven by a DC motor. The governing equations of motion were derived via Lagrange's equations. In the mathematical model we consider the interaction between the DC motor and the dynamical system, that is, we have a so-called non-ideal periodic problem. The problem is analysed and we also developed an optimal linear control design to stabilize the problem.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

An application of the linear machine one-dimensional analysis method to the modeling of a conventional asynchronous induction motor, considered as a particular case of linear and sectorial machines, is described. A mathematical model for the calculation of the propulsive force developed by this motor, taking into account the transversal edge effect, is derived from the application of the one-dimensional theory and presented in this paper. As an application example, an induction motor is analyzed by means of the one-dimensional theory.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The behaviors of an arc-shaped stator induction machine (the sector-motor) and a disc-secondary linear induction motor are analyzed in this work for different values of the frequency. Variable frequency is produced by a voltage source controlled-current inverter which keeps constant the r.m.s. value of the phase current, also assuring a sinusoidal waveform. For the simulations of the machine developed thrust, an equivalent circuit is used. It is obtained through the application of the one-dimensional theory to the modeling. The circuit parameters take into account the end effects, always present is these kind of machines. The phase current waveforms are analyzed for their harmonic contents. Experimental measurements were carried out in laboratory and are presented with the simulations, for comparison.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We apply the Bogoliubov Averaging Method to the study of the vibrations of an elastic foundation, forced by a Non-ideal energy source. The considered model consists of a portal plane frame with quadratic nonlinearities, with internal resonance 1:2, supporting a direct current motor with limited power. The non-ideal excitation is in primary resonance in the order of one-half with the second mode frequency. The results of the averaging method, plotted in time evolution curve and phase diagrams are compared to those obtained by numerically integrating of the original differential equations. The presence of the saturation phenomenon is verified by analytical procedures.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In practical situations, the dynamics of the forcing function on a vibrating system cannot be considered as given a priori, and it must be taken as a consequence of the dynamics of the whole system. In other words, the forcing source has limited power, as that provided by a DC motor for an example, and thus its own dynamics is influenced by that of the vibrating system being forced. This increases the number of degrees of freedom of the problem, and it is called a non-ideal problem. In this work, we considerer two non-ideal problems analyzed by using numerical simulations. The existence of the Sommerfeld effect was verified, that is, the effect of getting stuck at resonance (energy imparted to the DC motor being used to excite large amplitude motions of the supporting structure). We considered two kinds of non-ideal problem: one related to the transverse vibrations of a shaft carrying two disks and another to a piezoceramic bar transducer powered by a vacuum tube generated by a non-ideal source Copyright © 2007 by ASME.