896 resultados para in-depth analysis
Resumo:
The aim of the present work is to provide an in-depth analysis of the most representative mirroring techniques used in SPH to enforce boundary conditions (BC) along solid profiles. We specifically refer to dummy particles, ghost particles, and Takeda et al. [Prog. Theor. Phys. 92 (1994), 939] boundary integrals. The analysis has been carried out by studying the convergence of the first- and second-order differential operators as the smoothing length (that is, the characteristic length on which relies the SPH interpolation) decreases. These differential operators are of fundamental importance for the computation of the viscous drag and the viscous/diffusive terms in the momentum and energy equations. It has been proved that close to the boundaries some of the mirroring techniques leads to intrinsic inaccuracies in the convergence of the differential operators. A consistent formulation has been derived starting from Takeda et al. boundary integrals (see the above reference). This original formulation allows implementing no-slip boundary conditions consistently in many practical applications as viscous flows and diffusion problems.
Resumo:
The thesis investigates the properties of two trends or time series which formed a:part of the Co-Citation bibliometric model "X~Ray Crystallography and Protein Determination in 1978, 1980 and 1982". This model was one of several created for the 1983 ABRC Science Policy Study which aimed to test the utility of bibliometric models in a national science policy context. The outcome of the validation part of that study proved to be especially favourable concerning the utility of trend data, which purport to model the development of speciality areas in science over time. This assessment could have important implications for the use of such data in policy formulation. However one possible problem with the Science Policy Study's conclusions was that insufficient time was available in the study for an in-depth analysis of the data. The thesis aims to continue the validation begun in the ABRC study by providing a detailed.examination of the characteristics of the data contained in the Trends numbered 11 and 44 in the model. A novel methodology for the analysis of the properties of the trends with respect to their literature content is presented. This is followed by an assessment based on questionnaire and interview data, of the ability of Trend 44 to realistically model the historical development of the field of mobile genetic elements research over time, with respect to its scientific content and the activities of its community of researchers. The results of these various analyses are then used to evaluate the strenghts and weaknesses of a trend or time series approach to the modelling of the activities of scientifiic fields. A critical evaluation of the origins of the discovered strengths and weaknesses.in the assumptions underlying the techniques used to generate trends from co-citation data is provided. Possible improvements. to the modelling techniques are discussed.
Resumo:
OBJECTIVES: To understand older adults' experiences of moving into extra care housing which offers enrichment activities alongside social and healthcare support. DESIGN: A longitudinal study was conducted which adopted a phenomenological approach to data generation and analysis. METHODS: Semi-structured interviews were conducted in the first 18 months of living in extra care housing. Interpretative phenomenological analysis was used because its commitment to idiography enabled an in-depth analysis of the subjective lived experience of moving into extra care housing. Themes generated inductively were examined against an existential-phenomenological theory of well-being. RESULTS: Learning to live in an extra care community showed negotiating new relationships was not straightforward; maintaining friendships outside the community became more difficult as capacity declined. In springboard for opportunity/confinement, living in extra care provided new opportunities for social engagement and a restored sense of self. Over time horizons began to shrink as incapacities grew. Seeking care illustrated reticence to seek care, due to embarrassment and a sense of duty to one's partner. Becoming aged presented an ontological challenge. Nevertheless, some showed a readiness for death, a sense of homecoming. CONCLUSIONS: An authentic later life was possible but residents required emotional and social support to live through the transition and challenges of becoming aged. Enhancement activities boosted residents' quality of life but the range of activities could be extended to cater better for quieter, smaller scale events within the community; volunteer activity facilitators could be used here. Peer mentoring may help build new relationships and opportunities for interactive stimulation. Acknowledging the importance of feeling-empathic imagination-in caregiving may help staff and residents relate better to each other, thus helping individuals to become ontologically secure and live well to the end.
Resumo:
The purpose of this research was to explore perceptions among 9 th through 12th grade students from Brazil, Haiti and Jamaica, with respect to their heritage languages: Portuguese, Haitian Creole, and Jamaican Patois. An additional purpose was to understand in greater detail possible variations of perception with respect to heritage language maintenance (or loss) in relation to one’s gender, first language, and place of birth. The research implemented semi-structured interviews with male and female adolescents with these heritage language backgrounds. Participants’ responses were recorded and transcribed. The transcriptions were analyzed via a categorizing of themes emerging from the data. Data were analyzed using inductive analysis. Three categories emerged from the inductive analysis of the data: (a) heritage language, (b) bilingualism, and (c) English as a second language. The analysis reveals that as participants learn English, they continue to value their heritage language and feel positively toward bilingualism, but differ in their preference regarding use of native language and English in a variety of contexts. There seems to be a mismatch between a positive attitude and an interest in learning their heritage language. Families and teachers, as agents, may not be helping students fully understand the advantages of bilingualism. Students seem to have a lack of understanding of bilingualism’s cognitive and bi-literacy benefits. Instead, employment seems to be perceived as the number one reason for becoming bilingual. Also, the students have a desire to add culture to the heritage language curriculum. The study was conducted at one of the most diverse and largest high schools in Palm Beach, in Palm Beach County, Florida. The results of this study imply that given the positive attitude toward heritage language and bilingualism, students need to be guided in exploring their understanding of heritage language and bilingualism. Implications for teaching and learning, as well as recommendations for further research, are included.
Resumo:
Enterprise Application Integration (EAI) is a challenging area that is attracting growing attention from the software industry and the research community. A landscape of languages and techniques for EAI has emerged and is continuously being enriched with new proposals from different software vendors and coalitions. However, little or no effort has been dedicated to systematically evaluate and compare these languages and techniques. The work reported in this paper is a first step in this direction. It presents an in-depth analysis of a language, namely the Business Modeling Language, specifically developed for EAI. The framework used for this analysis is based on a number of workflow and communication patterns. This framework provides a basis for evaluating the advantages and drawbacks of EAI languages with respect to recurrent problems and situations.
Resumo:
Aboriginal women are treated differently by non-indigenous health care providers based on perceptions of Aboriginality and skin colour and white race privilege within health care environments. The experiences shared below are from some of the Aboriginal woman respondents in a research project undertaken within Rockhampton, a regional area in Central Queensland (Fredericks, 2003). The experiences give an insight into how the Aboriginal women interviewed felt and their observations of how other Aboriginal women were treated within health care settings based on skin colour and perceptions of Aboriginality. A number of the women demonstrated a personal in-depth analysis of the issues surrounding place, skin colour and Aboriginality. For example, one of the women, who I named Kay, identified one particular health service organisation and stated that, ‘it is a totally white designed space. There is nothing that identifies me to that place. I just won’t go there as a client because I don’t feel they cater for me as a black woman’. Kay’s words give us an understanding of the reality experienced by Aboriginal women as they move in and out of places within health environments and broader society. Some of these experiences are examples of direct racism, whilst other examples are subtle and demonstrate how whiteness manifests and plays out within places. I offer acknowledgement and honour to the Aboriginal women who shared their stories and gave me a glimpse of their realities in the research project from which the findings presented in this chapter are taken. It is to this research project that is the subject of this chapter.
Resumo:
The implementation of effective science programmes in primary schools is of continuing interest and concern for professional developers. As part of the Australian Academy of Science's approach to creating an awareness of Primary Investigations, a project team trialled a series of satellite television broadcasts of lessons related to two units of the curriculum for Year 3 and 4 children in 48 participating schools. The professional development project entitled Simply Science, included a focused component for the respective classroom teachers, which was also conducted by satellite. This paper reports the involvement of a Year 4 teacher in the project and describes her professional growth. Already an experienced and confident teacher, no quantitative changes in science teaching self efficacy were detected. However, her pedagogical content knowledge and confidence to teach science in the concept areas of matter and energy were enhanced. Changes in the teacher's views about the co-operative learning strategies espoused by Primary Investigations were also evident. Implications for the design of professional development programmes for primary science teachers are discussed.
Resumo:
With increasingly complex engineering assets and tight economic requirements, asset reliability becomes more crucial in Engineering Asset Management (EAM). Improving the reliability of systems has always been a major aim of EAM. Reliability assessment using degradation data has become a significant approach to evaluate the reliability and safety of critical systems. Degradation data often provide more information than failure time data for assessing reliability and predicting the remnant life of systems. In general, degradation is the reduction in performance, reliability, and life span of assets. Many failure mechanisms can be traced to an underlying degradation process. Degradation phenomenon is a kind of stochastic process; therefore, it could be modelled in several approaches. Degradation modelling techniques have generated a great amount of research in reliability field. While degradation models play a significant role in reliability analysis, there are few review papers on that. This paper presents a review of the existing literature on commonly used degradation models in reliability analysis. The current research and developments in degradation models are reviewed and summarised in this paper. This study synthesises these models and classifies them in certain groups. Additionally, it attempts to identify the merits, limitations, and applications of each model. It provides potential applications of these degradation models in asset health and reliability prediction.
Resumo:
Innovation Management (IM) in most knowledge based firms is used on an adhoc basis where senior managers use this term to leverage competitive edge without understanding its true meaning and how its robust application in organisation impacts organisational performance. There have been attempts in the manufacturing industry to harness the innovative potential of the business and apprehend its use as a point of difference to improve financial and non financial outcomes. However further work is required to innovatively extrapolate the lessons learnt to introduce incremental and/or radical innovation to knowledge based firms. An international structural engineering firm has been proactive in exploring and implementing this idea and has forged an alliance with the Queensland University of Technology to start the Innovation Management Program (IMP). The aim was to develop a permanent and sustainable program with which innovation can be woven through the fabric of the organisation. There was an intention to reinforce the firms’ vision and reinvigorate ideas and create new options that help in its realisation. This paper outlines the need for innovation in knowledge based firms and how this consulting engineering firm reacted to this exigency. The development of the Innovation Management Program, its different themes (and associated projects) and how they integrate to form a holistic model is also discussed. The model is designed around the need of providing professional qualification improvement opportunities for staff, setting-up organised, structured & easily accessible knowledge repositories to capture tacit and explicit knowledge and implement efficient project management strategies with a view to enhance client satisfaction. A Delphi type workshop is used to confirm the themes and projects. Some of the individual projects and their expected outcomes are also discussed. A questionnaire and interviews were used to collect data to select appropriate candidates responsible for leading these projects. Following an in-depth analysis of preliminary research results, some recommendations on the selection process will also be presented.
Resumo:
This thesis proposes that contemporary printmaking, at its most significant, marks the present through reconstructing pasts and anticipating futures. It argues this through examples in the field, occurring in contexts beyond the Euramerican (Europe and North America). The arguments revolve around how the practice of a number of significant artists in Japan, Australia and Thailand has generated conceptual and formal innovations in printmaking that transcend local histories and conventions, whilst paradoxically, also building upon them and creating new meanings. The arguments do not portray the relations between contemporary and traditional art as necessarily antagonistic but rather, as productively dialectical. Furthermore, the case studies demonstrate that, in the 1980s and 1990s particularly, the studio practice of these printmakers was informed by other visual arts disciplines and reflected postmodern concerns. Departures from convention witnessed in these countries within the Asia-Pacific region shifted the field of the print into a heterogeneous and hybrid realm. The practitioners concerned (especially in Thailand) produced work that was more readily equated with performance and installation art than with printmaking per se. In Japan, the incursion of photography interrupted the decorative cast of printmaking and delivered it from a straightforward, craft-based aesthetic. In Australia, fixed notions of national identity were challenged by print practitioners through deliberate cultural rapprochements and technical contradictions (speaking across old and new languages).However time-honoured print methods were not jettisoned by any case study artists. Their re-alignment of the fundamental attributes of printmaking, in line with materialist formalism, is a core consideration of my arguments. The artists selected for in-depth analysis from these three countries are all innovators whose geographical circumstances and creative praxis drew on local traditions whilst absorbing international trends. In their radical revisionism, they acknowledged the specificity of history and place, conditions of contingency and forces of globalisation. The transformational nature of their work during the late twentieth century connects it to the postmodern ethos and to a broader artistic and cultural nexus than has hitherto been recognised in literature on the print. Emerging from former guild-based practices, they ambitiously conceived their work to be part of a continually evolving visual arts vocabulary. I argue in this thesis that artists from the Asia-Pacific region have historically broken with the hermetic and Euramerican focus that has generally characterised the field. Inadequate documentation and access to print activity outside the dominant centres of critical discourse imply that readings of postmodernism have been too limited in their scope of inquiry. Other locations offer complexities of artistic practice where re-alignments of customary boundaries are often the norm. By addressing innovative activity in Japan, Australia and Thailand, this thesis exposes the need for a more inclusive theoretical framework and wider global reach than currently exists for ‘printmaking’.
Resumo:
In this study, a nanofiber mesh made by co-electrospinning medical grade poly(epsilon-caprolactone) and collagen (mPCL/Col) was fabricated and studied. Its mechanical properties and characteristics were analyzed and compared to mPCL meshes. mPCL/Col meshes showed a reduction in strength but an increase in ductility when compared to PCL meshes. In vitro assays revealed that mPCL/Col supported the attachment and proliferation of smooth muscle cells on both sides of the mesh. In vivo studies in the corpus cavernosa of rabbits revealed that the mPCL/Col scaffold used in conjunction with autologous smooth muscle cells resulted in better integration with host tissue when compared to cell free scaffolds. On a cellular level preseeded scaffolds showed a minimized foreign body reaction.
Resumo:
The Australian construction industry is characterized as being a competitive and risky business environment due to lack of cooperation, insufficient trust, ineffective communication and adversarial relationships which are likely lead to poor project performance. Relational contracting (RC) is advocated by literature as an innovative approach to improve the procurement process in the construction industry. Various studies have collectively added to the current knowledge of known RC norms, but there seem to be little effort on investigating the determinants of RC and its impact on project outcomes. In such circumstances, there is lack of evidence and explanation on the manner on how these issues lead to different performance. Simultaneously, the New Engineering Contract (NEC) that embraced the concept of RC is seen as a modern way of contracting and also considered as one of the best approaches to the perennial problem of improving adversarial relationships within the industry. The reality of practice of RC in Australia is investigated through the lens of the NEC. A synthesis of literature views on the concept, processes and tools of RC is first conducted to develop the framework of RC. A case study approach is proposed for an in-depth analysis to explore the critical issues addressed by RC in relation to project performance. Understanding the realities of RC will assist stakeholders in the construction industry with their investment in RC.