Monetary dynamics in a general equilibrium version of the Baumol-Tobin model

I study the welfare cost of inflation and the effect on prices after a permanent increase in the interest rate. In the steady state, the real money demand is homogeneous of degree one in income and its interest-rate elasticity is approximately equal to −1/2. Consumers are indifferent between an economy with 10% p.a. inflation and one with zero inflation if their income is 1% higher in the first economy. A permanent increase in the interest rate makes the price level to drop initially and inflation to adjust slowly to its steady state level.

Chile: building a computable general equilibrium model with an application to the Bío Bío region

Includes bibliography

Domestic, vertical, and horizontal multinationals : a general equilibrium approach using the "knowledge capital model"

One of the key factors behind the growth in global trade in recent decades is an increase in intermediate input as a result of the development of vertical production networks (Feensta, 1998). It is widely recognized that the formation of production networks is due to the expansion of multinational enterprises' (MNEs) activities. MNEs have been differentiated into two types according to their production structure: horizontal and vertical foreign direct investment (FDI). In this paper, we extend the model presented by Zhang and Markusen (1999) to include horizontal and vertical FDI in a model with traded intermediates, using numerical general equilibrium analysis. The simulation results show that horizontal MNEs are more likely to exist when countries are similar in size and in relative factor endowments. Vertical MNEs are more likely to exist when countries differ in relative factor endowments, and trade costs are positive. From the results of the simulation, lower trade costs of final goods and differences in factor intensity are conditions for attracting vertical MNEs.

Parameterization of applied general equilibrium models with flexible trade specifications based on the Armington, Krugman, and Melitz models

This paper explains how the Armington-Krugman-Melitz supermodel developed by Dixon and Rimmer can be parameterized, and demonstrates that only two kinds of additional information are required in order to extend a standard trade model to include Melitz-type monopolistic competition and heterogeneous firms. Further, it is shown how specifying too much additional information leads to violations of the model constraints, necessitating adjustment and reconciliation of the data. Once a Melitz-type model is parameterized, a Krugman-type model can also be parameterized using the calibrated values in the Melitz-type model without any additional data. Sample code for the General Algebraic Modeling System (GAMS) has also been prepared to promote the innovative supermodel in the AGE community.

Neutrality in the choice of number of firms or level of fixed costs in calibrating an Armington-Krugman-Melitz encompassing module for applied general equilibrium models

This paper shows how an Armington-Krugman-Melitz encompassing module based on Dixon and Rimmer (2012) can be calibrated, and clarifies the choice of initial levels for two kinds of number of firms, or parameter values for two kinds of fixed costs, that enter a Melitz-type specification can be set freely to any preferred value, just as the cases we derive quantities from given value data assuming some of the initial prices to be unity. In consequence, only one kind of additional information, which is on the shape parameter related to productivity, just is required in order to incorporate Melitz-type monopolistic competition and heterogeneous firms into a standard applied general equilibrium model. To be a Krugman-type, nothing is needed. This enables model builders in applied economics to fully enjoy the featured properties of the theoretical models invented by Krugman (1980) and Melitz (2003) in practical policy simulations at low cost.

Behavioral characteristics of applied general equilibrium models with an Armington-Krugman-Melitz encompassing module

This paper explore how simulation results change with different choice of trade specification, and the strength of preference for traded variety by economic agent differs, utilizing two types of three-region, three-sector AGE model that includes the Armington-Krugman-Melitz Encompassing module based on Dixon and Rimmer (2012). Simulation experiments reveal that: (1) the Melitz-type specification does not always enhance effectiveness of a certain policy change more than the one obtained with the Krugman-type, especially when economic agents' preference for traded variety is not so strong; (2) there are likely to be points where the volumes of effects obtained with the Melitz-type exceed the ones with the Krugman-type; and (3) the preference of the producers, those who are in the sectors that exhibit increasing returns to scale, for traded variety might be the engine of explosive effects as suggested by Fujita, et al. (2000).

Simulation analysis of the EU ELV/RoHS directives based on an applied general equilibrium model with Melitz-type trade specification

This paper explores the potential usefulness of an AGE model with the Melitz-type trade specification to assess economic effects of technical regulations, taking the case of the EU ELV/RoHS directives as an example. Simulation experiments reveal that: (1) raising the fixed exporting cost to make sales in the EU market brings results that exports of the targeted commodities (motor vehicles and parts for ELV and electronic equipment for RoHS) to the EU from outside regions/countries expand while the domestic trade in the EU shrinks when the importer's preference for variety (PfV) is not strong; (2) if the PfV is not strong, policy changes that may bring reduction in the number of firms enable survived producers with high productivity to expand production to be large-scale mass producers fully enjoying the fruit of economies of scale; and (3) When the strength of the importer's PfV is changed from zero to unity, there is the value that totally changes simulation results and their interpretations.

Labour Supply Curves for EU Member and Candidate States: An applied general equilibrium analysis. Factor Markets Working Paper No. 26, June 2012

This paper introduces a more sophisticated modelling of the labour market functioning of the European member and candidate states through the introduction of labour supply curves in an applied general equilibrium model. A labour supply curve offers a middle way in labour supply modelling, sitting between the two commonly adopted extremes of spare capacity and full employment. The first part of the paper outlines the theoretical foundation of the labour supply curve. Real world data is then used to derive labour supply curves for each member state, along with Croatia and Turkey. Finally, the impact of the newly specified labour markets on the results of an illustrative scenario involving reform of the common agricultural policy is explored. The results of computable general equilibrium analysis with the labour supply curve confirm the theoretical expectation that modelling the labour supply through an upwards-sloping curve produces results that lie between the extremes of spare capacity of the labour factor and fully employed labour. This specification captures a greater degree of heterogeneity in the labour markets of the member and candidate states, allowing for a more nuanced modelling of the effects of policy reform, including welfare effects.

Általános egyensúlyi modellek alkalmazása gazdaságpolitikai elemzésekre (Application of general equilibrium models to economic policy analyses)

A szerző az alkalmazott többszektoros modellezés területén a lineáris programozási modellektől a számszerűsített általános egyensúlyi modellekig végbement változásokat tekinti át. Egy rövid történeti visszapillantás után a lineáris programozás módszereire épülő nemzetgazdasági szintű modellekkel összevetve mutatja be az általános egyensúlyi modellek közös, illetve eltérő jellemzőit. Egyidejűleg azt is érzékelteti, hogyan lehet az általános egyensúlyi modelleket a gazdaságpolitikai célok konzisztenciájának, a célok közötti átváltási lehetőségek elemzésére és általában a gazdaságpolitikai elképzelések érzékenységi vizsgálatára felhasználni. A szerző az elméleti-módszertani kérdések taglalását számszerűsített általános egyensúlyi modell segítségével illusztrálja. _______ The author surveys the changes having taken place in the field of multi-sector modeling, from the linear programming models to the quantified general equilibrium models. After a brief historical retrospection he presents the common and different characteristic features of the general equilibrium models by comparing them with the national economic level models based on the methods of linear programming. He also makes clear how the general equilibrium models can be used for analysing the consistency of economic policy targets, for the investigation of trade-off possibilities among the targets and, in general, for sensitivity analyses of economic policy targets. The discussion of theoretical and methodological quuestions is illustrated by the author with the aid of a quantified general equilibrium model.

Kornai’s DRSE Theory Versus General Equilibrium Theory

János Kornai’s DRSE theory (Kornai, 2014) follows the ex post model philosophy which radically rejects the ex ante set of conditions laid down by the dominant neoclassical school and the stringent limits of equilibrium, and defines its own premises for the functioning of capitalist economy. In other words, the DRSE theory represents an extremely novel trend among the various schools of economics. The theory is still only a verbal model with the following supporting pillars as the immanent features of the capitalist system: dynamism, rivalry and the surplus economy. (The English name of the theory uses the initial letters of the terms Dynamism, Rivalry, Surplus Economy). The dominance of the surplus economy, that is, oversupply is replaced by monopolistic competition, uncertainty over the volume of demand, Schumpeterian innovation, dynamism, technological progress, creative destruction and increasing return to scale with rivalry between producers and service providers for markets. This paper aims to examine whether the DRSE theory can be formulated as a formal mathematical model. We have chosen a special route to do this: first we explore the unreal ex ante assumptions of general equilibrium theory (Walras, 1874; Neumann, 1945), and then we establish some of the possible connections between the premises of DRSE, which include the crucial condition that just like in biological evolution, there is no fixed steady state in the evolutionary processes of market economy, not even as a point of reference. General equilibrium theory and DRSE theory are compared in the focus of Schumpeterian evolutionary economics.

Other-Regarding Preferences in General Equilibrium

We study competitive market outcomes in economies where agents have other-regarding preferences. We identify a separability condition on monotone preferences that is necessary and sufficient for one’s own demand to be independent of the allocations and characteristics of other agents in the economy. Given separability, it is impossible to identify other-regarding preferences from market behavior: agents be- have as if they had classical preferences that depend only on own consumption in competitive equilibrium. If preferences, in addition, depend only on the final allocation of consumption in society, the Sec- ond Welfare Theorem holds as long as an increase in resources can be distributed such that all agents are better off. Nevertheless, the First Welfare Theorem generally does not hold. Allowing agents to care about their own consumption and the distribution of consump- tion possibilities in the economy, we provide a condition under which agents have no incentive to make direct transfers, and show that this condition implies that competitive equilibria are efficient given prices.

Designing Efficient Subsidy Policies in a Regional Economy: A Multicriteria Decision-Making (MCDM)-Computable General Equilibrium (CGE) Approach

Since policy-makers usually pursue several conflicting objectives, policy-making can be understood as a multicriteria decision problem. Following the methodological proposal by André and Cardenete (2005) André, F. J. and Cardenete, M. A. 2005. Multicriteria Policy Making. Defining Efficient Policies in a General Equilibrium Model, Seville: Centro de Estudios Andaluces. Working Paper No. E2005/04, multi-objective programming is used in connection with a computable general equilibrium model to represent optimal policy-making and to obtain so-called efficient policies in an application to a regional economy (Andalusia, Spain). This approach is applied to the design of subsidy policies under two different scenarios. In the first scenario, it is assumed that the government is concerned just about two objectives: ensuring the profitability of a key strategic sector and increasing overall output. Finally, the scope of the exercise is enlarged by solving a problem with seven policy objectives, including both general and sectorial objectives. It is concluded that the observed policy could have been Pareto-improved in several directions.