The order selection and lot sizing problem in the make-to-order environment

This research is motivated by the need for considering lot sizing while accepting customer orders in a make-to-order (MTO) environment, in which each customer order must be delivered by its due date. Job shop is the typical operation model used in an MTO operation, where the production planner must make three concurrent decisions; they are order selection, lot size, and job schedule. These decisions are usually treated separately in the literature and are mostly led to heuristic solutions. The first phase of the study is focused on a formal definition of the problem. Mathematical programming techniques are applied to modeling this problem in terms of its objective, decision variables, and constraints. A commercial solver, CPLEX is applied to solve the resulting mixed-integer linear programming model with small instances to validate the mathematical formulation. The computational result shows it is not practical for solving problems of industrial size, using a commercial solver. The second phase of this study is focused on development of an effective solution approach to this problem of large scale. The proposed solution approach is an iterative process involving three sequential decision steps of order selection, lot sizing, and lot scheduling. A range of simple sequencing rules are identified for each of the three subproblems. Using computer simulation as the tool, an experiment is designed to evaluate their performance against a set of system parameters. For order selection, the proposed weighted most profit rule performs the best. The shifting bottleneck and the earliest operation finish time both are the best scheduling rules. For lot sizing, the proposed minimum cost increase heuristic, based on the Dixon-Silver method performs the best, when the demand-to-capacity ratio at the bottleneck machine is high. The proposed minimum cost heuristic, based on the Wagner-Whitin algorithm is the best lot-sizing heuristic for shops of a low demand-to-capacity ratio. The proposed heuristic is applied to an industrial case to further evaluate its performance. The result shows it can improve an average of total profit by 16.62%. This research contributes to the production planning research community with a complete mathematical definition of the problem and an effective solution approach to solving the problem of industry scale.

Branch and price solution approach for order acceptance and capacity planning in make -to -order operations

The increasing emphasis on mass customization, shortened product lifecycles, synchronized supply chains, when coupled with advances in information system, is driving most firms towards make-to-order (MTO) operations. Increasing global competition, lower profit margins, and higher customer expectations force the MTO firms to plan its capacity by managing the effective demand. The goal of this research was to maximize the operational profits of a make-to-order operation by selectively accepting incoming customer orders and simultaneously allocating capacity for them at the sales stage. ^ For integrating the two decisions, a Mixed-Integer Linear Program (MILP) was formulated which can aid an operations manager in an MTO environment to select a set of potential customer orders such that all the selected orders are fulfilled by their deadline. The proposed model combines order acceptance/rejection decision with detailed scheduling. Experiments with the formulation indicate that for larger problem sizes, the computational time required to determine an optimal solution is prohibitive. This formulation inherits a block diagonal structure, and can be decomposed into one or more sub-problems (i.e. one sub-problem for each customer order) and a master problem by applying Dantzig-Wolfe’s decomposition principles. To efficiently solve the original MILP, an exact Branch-and-Price algorithm was successfully developed. Various approximation algorithms were developed to further improve the runtime. Experiments conducted unequivocally show the efficiency of these algorithms compared to a commercial optimization solver.^ The existing literature addresses the static order acceptance problem for a single machine environment having regular capacity with an objective to maximize profits and a penalty for tardiness. This dissertation has solved the order acceptance and capacity planning problem for a job shop environment with multiple resources. Both regular and overtime resources is considered. ^ The Branch-and-Price algorithms developed in this dissertation are faster and can be incorporated in a decision support system which can be used on a daily basis to help make intelligent decisions in a MTO operation.^

Branch and Price Solution Approach for Order Acceptance and Capacity Planning in Make-to-Order Operations

The increasing emphasis on mass customization, shortened product lifecycles, synchronized supply chains, when coupled with advances in information system, is driving most firms towards make-to-order (MTO) operations. Increasing global competition, lower profit margins, and higher customer expectations force the MTO firms to plan its capacity by managing the effective demand. The goal of this research was to maximize the operational profits of a make-to-order operation by selectively accepting incoming customer orders and simultaneously allocating capacity for them at the sales stage. For integrating the two decisions, a Mixed-Integer Linear Program (MILP) was formulated which can aid an operations manager in an MTO environment to select a set of potential customer orders such that all the selected orders are fulfilled by their deadline. The proposed model combines order acceptance/rejection decision with detailed scheduling. Experiments with the formulation indicate that for larger problem sizes, the computational time required to determine an optimal solution is prohibitive. This formulation inherits a block diagonal structure, and can be decomposed into one or more sub-problems (i.e. one sub-problem for each customer order) and a master problem by applying Dantzig-Wolfe’s decomposition principles. To efficiently solve the original MILP, an exact Branch-and-Price algorithm was successfully developed. Various approximation algorithms were developed to further improve the runtime. Experiments conducted unequivocally show the efficiency of these algorithms compared to a commercial optimization solver. The existing literature addresses the static order acceptance problem for a single machine environment having regular capacity with an objective to maximize profits and a penalty for tardiness. This dissertation has solved the order acceptance and capacity planning problem for a job shop environment with multiple resources. Both regular and overtime resources is considered. The Branch-and-Price algorithms developed in this dissertation are faster and can be incorporated in a decision support system which can be used on a daily basis to help make intelligent decisions in a MTO operation.

Virtual-Build-to-Order as a Mass Customization Order Fulfilment Model

Virtual-build-to-order (VBTO) is a form of order fulfilment system in which the producer has the ability to search across the entire pipeline of finished stock, products in production and those in the production plan, in order to find the best product for a customer. It is a system design that is attractive to Mass Customizers, such as those in the automotive sector, whose manufacturing lead time exceeds their customers' tolerable waiting times, and for whom the holding of partly-finished stocks at a fixed decoupling point is unattractive or unworkable. This paper describes and develops the operational concepts that underpin VBTO, in particular the concepts of reconfiguration flexibility and customer aversion to waiting. Reconfiguration is the process of changing a product's specification at any point along the order fulfilment pipeline. The extent to which an order fulfilment system is flexible or inflexible reveals itself in the reconfiguration cost curve, of which there are four basic types. The operational features of the generic VBTO system are described and simulation is used to study its behaviour and performance. The concepts of reconfiguration flexibility and floating decoupling point are introduced and discussed.

Fundamental behaviour of Virtual-Build-to-Order systems

Virtual-Build-to-Order (VBTO) is an emerging order fulfilment system within the automotive sector that is intended to improve fulfilment performance by taking advantage of integrated information systems. The primary innovation in VBTO systems is the ability to make available all unsold products that are in the production pipeline to all customers. In a conventional system the pipeline is inaccessible and a customer can be fulfilled by a product from stock or having a product Built-to-Order (BTO), whereas in a VBTO system a customer can be fulfilled by a product from stock, by being allocated a product in the pipeline, or by a build-to-order product. Simulation is used to investigate and profile the fundamental behaviour of the basic VBTO system and to compare it to a Conventional system. A predictive relationship is identified, between the proportions of customers fulfilled through each mechanism and the ratio of product variety / pipeline length. The simulations reveal that a VBTO system exhibits inherent behaviour that alters the stock mix and levels, leading to stock levels being higher than in an equivalent conventional system at certain variety / pipeline ratios. The results have implications for the design and management of order fulfilment systems in sectors such as automotive where VBTO is a viable operational model.

A survey of the northern neck of Virginia, being the lands belonging to the Rt. Honourable Thomas Lord Fairfax Baron Cameron, bounded by & within the Bay of Chesapoyocke and between the rivers Rappahannock and Potowmack: With the courses of the rivers Rappahannock and Potowmack, in Virginia, as surveyed according to order in the years 1736 & 1737.

Scale ca. 1:875,000.

Massaräätälöinti asiakasohjautuvan tuotannon tehostamiseksi

Kiristyvä kilpailutilanne pakottaa yritykset tehostamaan toimintaansa. Tulevaisuudessa asiakkaat ovat yhä vaativampia ja he haluavat yksilöllisiä tuotteita ja palveluja. He vaativat myös laatua ja lyhyitä toimitusaikoja. Massaräätälöinti on toimintamalli, jolla tulevaisuuden haasteisiin pystytään vastaamaan. Työn tavoitteena oli kehittää yritykselle massaräätälöinnin vaatimukset täyttävä tuotannonohjausjärjestelmä. Massaräätälöinnin ja tuotannonohjausjärjestelmän muutosten seurauksena myös hankintatoimet oli muutettava uuteen toimintamalliin soveltuvaksi. Massaräätälöinnin vaikutuksia oli arvioitava koko tilaus-toimitusketjussa. Muutosten seurauksena mm. alhaisen toimitusvarmuuden ja pitkien toimitusaikojen tulee parantua. Teoriaosassa selvitettiin massaräätälöinnin vaikutuksia koko tilaus-toimitusketjuun sekä tuotannonohjaustapojen soveltuvuutta massaräätälöintiin. Lisäksi selvitettiin massaräätälöinnin soveltamisen perusvaatimuksena olevan lean-toiminnan osa-alueita. Työn tuloksena kehitettiin yrityksen toimintaan ja massaräätälöintiin soveltuva toimintamalli, joka kulminoituu uudenlaiseksi tuotannonohjausjärjestelmäksi. Lisäksi esitetyillä hankintatoimien muutoksilla kehitettiin toimittajaverkkoa ja muutettiin ostopolitiikkaa. Layoutin muuttamisella variointiperusteiseksi tuotanto-organisaatioksi mahdollistettiin joustavat ja vaihtoehtoiset tuotantoreitit sekä asetuserien yhdistelymahdollisuudet. Esitettyjen muutosten avulla pystyttiin lyhentämään valmistettavien linjastojen toimitusaikaa sekä parantamaan niiden toimitusvarmuutta. Lisäksi muutokset selkeyttivät hankintatoimia sekä vähensivät esiintyneitä varaston puutetilanteita. Näiden seurauksena yrityksen on mahdollista parantaa kilpailukykyään markkinoilla ja huomioida tuotteissaan asiakkaiden yksilölliset toiveet.

Pk-yrityksen polku systemaattiseen tuote- ja elinkaaritiedon hallintaan

Tutkimus on tehty Tekesin DTP-ohjelman Sinfonet-tutkimusprojektin puitteissa aikavälillä 2009-2011. Työssä on laadittu kokonaisvaltainen tuote- ja elinkaaritiedon hallinnan (eng. Product Lifecycle Management, PLM) tiekartta ja kehityssuunnitelma pienelle engineering-yritykselle. Työ käsittelee asiakkaan erikoisvaatimusten mukaan räätälöitävän tuotteen tuote- ja elinkaaritiedon hallinnan systematisointia pk-yrityksessä. Vaikka PLM-tiekartta on laadittu yksittäiselle yritykselle, sitä voidaan tietyin edellytyksin soveltaa myös toisten pk-yritysten tai engineeringyritysten PLM:n kehittämiseen. Teoriassa tarkastellaan ensinnäkin kohdeyritykseen liittyviä erityispiirteitä, pyritään ymmärtämään engineering–yrityksen ja pk-yrityksen erikoispiirteitä sekä niiden vaikutusta PLM:n kehittämiseen. Toiseksi esitellään PLM:n viittä keskeistä osaaluetta, yksi- ja viisiulotteisten PLM-kypsyysmallien käyttöä yrityksen nykytilan arvioimiseksi sekä rakennetaan engineering-yrityksen kokonaisvaltainen PLM-malli ja kahdeksan askeleen PLM-kehityspolku. PLM-malli jäsentää tiedonhallintaa prosessien kautta ja se koostuu viidestä osaalueesta: strategia identifioi asiakastarpeet sekä määrittelee kuinka tuotteiden ja prosessien avulla asiakastarpeet tyydytetään; prosessit ovat yrityksen toiminnan ydin, joissa tuotemallit ja tuote- ja tietorakenteet kehitetään sekä tuoteyksilöt toimitetaan asiakkaalle; rakenteet pohjautuvat strategiassa valittuun tuote- ja tiedonhallinnan strategiaan ja niiden tehtävänä on tukea ja tehostaa toimintaprosesseja; kulttuuri ja ihmiset muodostavat aineettoman pääoman, jonka vaikutuksesta prosessit toimivat ja tuotteet pystytään toimittamaan asiakkaalle; informaatioteknologia on työkalu, jota käytetään prosesseissa ja tietorakenteiden ylläpidossa, pääosin dokumentoidun tiedon luomiseen, hankitaan, varastoimiseen, jakamiseen ja soveltamiseen. Tapaustutkimuksessa kuvataan kohdeyrityksen nykytilaa PLM:n viidellä keskeisellä osa-alueella, tehdään PLM kypsyysarvio kahdella menetelmällä, määritellään yrityksen tavoitetila ja laaditaan yritykselle ensin alustava PLM roadmap ja lopulta kokonaisvaltaiseen PLM-malliin perustuva PLM roadmap ja PLM:n jatkokehityssuunnitelma.

ETO-Tuotekehitysprojektin suorituskyvyn mittaaminen

Tutkimuksen tavoitteena oli selvittää, mitä suorituskyvyn osa-alueita ETO (Engineer To Order) – tyyppinen tuotekehitysprojekti pitää sisällään, ja mitkä niistä ovat projektin onnistumisen kannalta tärkeimpiä, eli niin sanottuja menestystekijöitä. Edelleen näiden tunnistettujen menestystekijöiden pohjalta oli tavoitteena kehittää suorituskyvyn mittausmalli, jonka avulla voisi arvioida ja ohjata projektin ja projektinhallinnan suorituskykyä. Tärkeimmät suorituskyvyn näkökulmat tässä mallissa olivat projektin kannattavuuden -, asiakastyytyväisyyden - ja projektinhallinnan näkökulmat. Malli tehtiin rautatieliikenne toimialalla toimivalle yritykselle, joka asetti omat vaatimuksensa mallille. Tutkimus tehtiin kolmivaiheisesti. Ensimmäisessä vaiheessa tutustuttiin aiempiin tutkimuksiin, joiden pohjalta pyrittiin löytämään projektin menestystekijät, sekä näiden suorituskyvyn analysointiin toimiviksi todetut mittausmenetelmät. Ensimmäisessä vaiheessa tutustuttiin myös alaa ohjaaviin standardeihin, ja niiden asettamiin erityisvaatimuksiin projektien suorituskyvyn mittaukselle. Tutkimuksen toinen vaihe oli tapaustutkimus kohdeyrityksen sisäiselle projektiorganisaatiolle, joka toteutettiin survey-kyselynä. Kyselyn avulla pyrittiin löytämään ne menestystekijät, jotka projektiorganisaation itsensä mielestä olivat kaikkein tärkeimpiä projektin onnistumisen kannalta. Kyselyllä pyrittiin myös selvittämään sidosryhmien välisiä näkemyseroja projektin menestystekijöistä. Kysymykset muodostettiin synteesinä tutkimuksen ensimmäisessä vaiheessa löydetyistä menestystekijöistä ja standardien vaatimista pakollisista mitattavista tekijöistä. Tärkeimmäksi menestystekijäksi kyselyssä nousi projektipäällikön kompetenssi. Kyselyssä vastaajilta kysyttiin myös sitä, minkä menestystekijöiden suorituskykyä heidän mielestään tulisi mitata. Tärkeimmäksi mitattavaksi osa-alueeksi nousi aikataulun tarkka seuranta. Kolmannessa vaiheessa näiden kohdeyrityksen menestystekijöiden pohjalta luotiin mittausmalli, joka pyrkii mittaamaan projektin ja projektinhallinnan suorituskykyä tasapainoisesti valituista näkökulmista. Malli ottaa huomioon erityisesti projektinhallinnan suorituskyvyn vaikutuksen projektin lopputuotteena syntyvien hyödykkeiden laatuun. Kohdeyrityksen kokonaissuorituskyvyn kannalta on erittäin tärkeää parantaa projektien suorituskykyä, johon projektien suorituskyvyn mittaaminen on ratkaisu. Standardien asettamat vaatimukset antavat hyvät lähtökohdat kokonaisvaltaisen mittausjärjestelmän luomiselle.

The Golden Gate Bridge at San Francisco, California ... report of the Chief Engineer, with architectural studies, to the Board of Directors, Golden Gate Bridge and Highway District, August 27, 1930.

Chief engineer: J. B. Strauss; traffic engineer: S.W. Taylor, jr.

Pré-fabricação em betão armado – Uma abordagem sobre a indústria e seus processos

O presente relatório resulta do estágio que decorreu na empresa TELHABEL, em Vila Nova de Famalicão e insere-se na unidade curricular Dissertação, Projeto e Estágio (DIPRE) do 2º semestre do 2º ano do curso de Mestrado em Engenharia Civil no ramo de construções no Instituto Superior de Engenharia do Porto. Durante o período de estágio foi possível adquirir uma visão abrangente da pré-fabricação em betão armado e pré-esforçado, que incluiu todas as áreas envolvidas no processo: atividades prévias, organização fabril, processo industrial, produção, transporte e montagem. Foi estabelecido um programa de trabalhos que envolveu a pesquisa de elementos bibliográficos sobre pré-fabricação, e o contacto com o dia-a-dia de uma empresa industrial. Foram estudadas várias tecnologias fabris de produção de elementos pré-fabricados, tentando perceber as suas vantagens, campos de aplicação e condicionantes de utilização. Analisou-se o trabalho fabril incidindo na organização e sequência de atividades, desde a realização de armaduras, cofragens, betonagem, controlo de qualidade até à armazenagem de produto acabado. Com complemento da atividade fabril fez-se uma breve referência ao transporte e montagem do material e a sua íntima relação com a produção. Uma vez que, em Portugal, a pré-fabricação se encontra numa fase de escassa atividade, procurou-se simular um caso real que permitisse ao formando o estudo de um projeto fictício, mas perfeitamente realizável. Concebeu-se a estrutura pré-fabricada para construir um armazém, da qual se fez a medição, orçamentação e elaboração dos desenhos de cofragem para fabrico. Posteriormente estudou-se também a produção da ponte sobre o rio Giraul, que se encontra, presentemente, em produção pela empresa, em Angola. Neste estudo procurou-se perceber as questões envolvidas nas cofragens e armaduras, tendo sido estudada a preparação destas últimas, de modo a alertar o formando para os problemas envolvidos na sua execução. A análise aos projetos propostos permitiu compreender a responsabilidade e complexidade das tarefas envolvidas na produção de pré-fabricados.

New strategies to detect and understand genotype-by-environment interactions and QTL-by-environment interactions

Dissertação para obtenção do Grau de Doutor em Estatística e Gestão do Risco, especialidade em Estatística

Fourth order pseudo maximum likelihood methods

We extend PML theory to account for information on the conditional moments up to order four, but without assuming a parametric model, to avoid a risk of misspecification of the conditional distribution. The key statistical tool is the quartic exponential family, which allows us to generalize the PML2 and QGPML1 methods proposed in Gourieroux et al. (1984) to PML4 and QGPML2 methods, respectively. An asymptotic theory is developed. The key numerical tool that we use is the Gauss-Freud integration scheme that solves a computational problem that has previously been raised in several fields. Simulation exercises demonstrate the feasibility and robustness of the methods [Authors]

Universal Design for Better Living: “Where to Get Gadgets and Gizmos”, May 2004

If they don’t carry the item, ask them to order it for you. Look at discount stores, such as Target, Wal-Mart, K-Mart, or Menard’s (they are more likely to carry items with universal design features). Look at the “Gadgets and Gizmos” section of the Iowa State University Extension Web site on “Universal Design & Home Accessibility.”

Iowa County Engineer's Annual Highway Report Requirements, January 2011

1. Iowa Code Section 309.22 requires the County Engineer to submit an Annual Report to the Iowa DOT by September 15 of each year. 2. Iowa DOT Administrative Rule 761, Chapter 173.3 requires the Iowa DOT to distribute a detailed set of instructions to the counties for the preparation of the report. The instructions constitute the standard requirements and forms to be followed. 3. Iowa DOT Administrative Rule 761,Chapter 178 establishes requirements for the reporting by cities and counties of project cost information to the Iowa DOT 4. Iowa DOT policy states that the report shall cover the fiscal year from July 1st of the past calendar year to June 30th of the current calendar year.