Adjustable stiffness, external fixator for the rat femur osteotomy and segmental bone defect models

The mechanical environment around the healing of broken bone is very important as it determines the way the fracture will heal. Over the past decade there has been great clinical interest in improving bone healing by altering the mechanical environment through the fixation stability around the lesion. One constraint of preclinical animal research in this area is the lack of experimental control over the local mechanical environment within a large segmental defect as well as osteotomies as they heal. In this paper we report on the design and use of an external fixator to study the healing of large segmental bone defects or osteotomies. This device not only allows for controlled axial stiffness on the bone lesion as it heals, but it also enables the change of stiffness during the healing process in vivo. The conducted experiments have shown that the fixators were able to maintain a 5 mm femoral defect gap in rats in vivo during unrestricted cage activity for at least 8 weeks. Likewise, we observed no distortion or infections, including pin infections during the entire healing period. These results demonstrate that our newly developed external fixator was able to achieve reproducible and standardized stabilization, and the alteration of the mechanical environment of in vivo rat large bone defects and various size osteotomies. This confirms that the external fixation device is well suited for preclinical research investigations using a rat model in the field of bone regeneration and repair.

Vertically-aligned graphene flakes on nanoporous templates: morphology, thickness, and defect level control by pre-treatment

Various morphologies of the vertically-aligned graphene flakes were fabricated on the nanoporous templates treated with metal ions in solutions, as well as coated with a thin gold layer and activated in the low-temperature Ar plasma. The thickness and level of structural defects in the graphene flakes could be effectively controlled by a proper selection of the pre-treatment method. We have also demonstrated that various combinations of the flake thickness and defect levels can be obtained, and the morphology and density of the graphene pattern can be effectively controlled. The result obtained could be of interest for various applications requiring fabrication of large graphene networks with controllable properties.

Histopathological features of bone regeneration in a canine segmental ulnar defect model

Background Today, finding an ideal biomaterial to treat the large bone defects, delayed unions and non-unions remains a challenge for orthopaedic surgeions and researchers. Several studies have been carried out on the subject of bone regeneration, each having its own advantages. The present study has been designed in vivo to evaluate the effects of cellular auto-transplantation of tail vertebrae on healing of experimental critical bone defect in a dog model. Methods Six indigenous breeds of dog with 32 ± 3.6 kg average weight from both sexes (5 males and 1 female) received bilateral critical-sized ulnar segmental defects. After determining the health condition, divided to 2 groups: The Group I were kept as control I (n = 1) while in Group II (experimental group; n = 5) bioactive bone implants were inserted. The defects were implanted with either autogeneic coccygeal bone grafts in dogs with 3-4 cm diaphyseal defects in the ulna. Defects were stabilized with internal plate fixation, and the control defects were not stabilized. Animals were euthanized at 16 weeks and analyzed by histopathology. Results Histological evaluation of this new bone at sixteen weeks postoperatively revealed primarily lamellar bone, with the formation of new cortices and normal-appearing marrow elements. And also reformation cortical compartment and reconstitution of marrow space were observed at the graft-host interface together with graft resorption and necrosis responses. Finally, our data were consistent with the osteoconducting function of the tail autograft. Conclusions Our results suggested that the tail vertebrae autograft seemed to be a new source of autogenous cortical bone in order to supporting segmental long bone defects in dogs. Furthermore, cellular autotransplantation was found to be a successful replacement for the tail vertebrae allograft bone at 3-4 cm segmental defects in the canine mid- ulna. Clinical application using graft expanders or bone autotransplantation should be used carefully and requires further investigation.

Defect production due to quenching through a multicritical point

We study the generation of defects when a quantum spin system is quenched through a multicritical point by changing a parameter of the Hamiltonian as t/tau, where tau is the characteristic timescale of quenching. We argue that when a quantum system is quenched across a multicritical point, the density of defects (n) in the final state is not necessarily given by the Kibble-Zurek scaling form n similar to 1/tau(d nu)/((z nu+1)), where d is the spatial dimension, and. and z are respectively the correlation length and dynamical exponent associated with the quantum critical point. We propose a generalized scaling form of the defect density given by n similar to 1/(tau d/(2z2)), where the exponent z(2) determines the behavior of the off-diagonal term of the 2 x 2 Landau-Zener matrix at the multicritical point. This scaling is valid not only at a multicritical point but also at an ordinary critical point.

Defect-selective photothermal imaging: a sensitive tool for damage mapping in optical coatings

A defect-selective photothermal imaging system for the diagnostics of optical coatings is demonstrated. The instrument has been optimized for pump and probe parameters, detector performance, and signal processing algorithm. The imager is capable of mapping purely optical or thermal defects efficiently in coatings of low damage threshold and low absorbance. Detailed mapping of minor inhomogeneities at low pump power has been achieved through the simultaneous action of a low-noise fiber optic photothermal beam defection sensor and a common-mode-rejection demodulation (CMRD) technique. The linearity and sensitivity of the sensor have been examined theoretically and experimentally, and the signal to noise ratio improvement factor is found to be about 110 compared to a conventional bicell photodiode. The scanner is so designed that mapping of static or shock sensitive samples is possible. In the case of a sample with absolute absorptance of 3.8 x 10(-4), a change in absorptance of about 0.005 x 10(-4) has been detected without ambiguity, ensuring a contrast parameter of 760. This is about 1085% improvement over the conventional approach containing a bicell photodiode, at the same pump power. The merits of the system have been demonstrated by mapping two intentionally created damage sites in a MgF2 coating on fused silica at different excitation powers. Amplitude and phase maps were recorded for thermally thin and thick cases, and the results are compared to demonstrate a case which, in conventional imaging, would lead to a deceptive conclusion regarding the type and location of the damage. Also, a residual damage profile created by long term irradiation with high pump power density has been depicted.

Stability of Fe3+ -VO defect pairs in polycrystalline Pb(Ti,Zr)O3

The intensity of the EPR signal with g = 5.985 arising from a ferric ion â oxygen vacancy defect pair (Fe3+ â VO) in PbTiO3, varies with the extent of PbO nonstoichiometry at constant Fe3+ content due to an increased oxygen vacancy concentration. In PZT solid solutions, the signal intensity decreases with an increase in Zr. A lower intensity is also noticed for Fe3+ â VO signals in PbZrO3. This behaviour is explained on the basis of PbO nonstoichiometry arising from independent Pb- and O-vacancies as well as the randomly distributed crystallographic shear (CS) plane defects. The contribution to PbO nonstoichiometry from CS planes is larger in high zirconium compositions of PZT.

Growth defect in Grg5 null mice is associated with reduced Ihh signaling in growth plates

Gene-targeted disruption of Grg5, a mouse homologue of Drosophila groucho (gro), results in postnatal growth retardation in mice. The growth defect, most striking in approximately half of the Grg5 null mice, occurs during the first 4-5 weeks of age, but most mice recover retarded growth later. We used the nonlinear mixed-effects model to fit the growth data of wild-type, heterozygous, and Grg5 null mice. On the basis of preliminary evidence suggesting an interaction between Grg5 and the transcription factor Cbfa1/Runx2, critical for skeletal development, we further investigated the skeleton in the mice. A long bone growth plate defect was identified, which included shorter zones of proliferative and hypertrophic chondrocytes and decreased trabecular bone formation. This decreased trabecular bone formation is likely caused by a reduced recruitment of osteoblasts into the growth plate region of Grg5 null mice. Like the growth defect, the growth plate and trabecular bone abnormality improved as the mice grew older. The growth plate defect was associated with reduced Indian hedgehog expression and signaling. We suggest that Grg5, a transcriptional coregulator, modulates the activities of transcription factors, such as Cbfa1/Runx2 in vivo to affect Ihh expression and the function of long bone growth plates.

Numerical studies on columnar-to-equiaxed transition in directional solidification of binary alloys

A numerical study on columnar-to-equiaxed transition (CET) during directional solidification of binary alloys is presented using a macroscopic solidification model. The position of CET is predicted numerically using a critical cooling rate criterion reported in literature. The macroscopic solidification model takes into account movement of solid phase due to buoyancy, and drag effect on the moving solid phase because of fluid motion. The model is applied to simulate the solidification process for binary alloys (Sn-Pb) and to estimate solidification parameters such as position of the liquidus, velocity of the liquidus isotherm, temperature gradient ahead of the liquidus, and cooling rate at the liquidus. Solidification phenomena under two cooling configurations are studied: one without melt convection and the other involvin thermosolutal convection. The numerically predicted positions of CET compare well with those of experiments reported in literature. Melt convection results in higher cooling rate, higher liquidus isotherm velocities, and stimulation of occurrence of CET in comparison to the nonconvecting case. The movement of solid phase aids further the process of CET. With a fixed solid phase, the occurrence of CET based on the same critical cooling rate is delayed and it occurs at a greater distance from the chill.

Defect Sensitization of Combustion and Thermal Decomposition of Ammonium Perchlorate: Effect of Pelletizing Pressure and Dwell Time

A systematic study was undertaken on the combustion and thermal decomposition of pelletized Ammonium Perchlorate (AP) to investigate the effects of pelletizing pressure and dwell time. At constant pressure, increasing the dwell time results in an increase in the burning rate up to a maximum and thereafter decreases it. The dwell time required for the pellets to have maximum burning rate is a function of pressure. The maximum burning rate is the same for all the pressures used and is also unaffected by increasing, to the range 90-250 μ, the particle size of AP used. In order to explain the occurrence of a maximum in burning rate, pellets were examined for their thermal sensitivities, physical nature and the changes occurring during pelletization with dwell time and pressure. The variations are argued in terms of increasing density, formation of defects such as dislocations leading to an increase in the number of reactive sites, followed by their partial annihilation at longer dwell times due to flow of material during pelletization.

Resin defect impacts on the value of graded recovery and evaluation of technologies for internal defect detection in slash pine logs.

The key outcome will be to identify a technology that is practical to use to scan logs identified by the modelling as suspect or marginal for sawing and to confirm their unsuitability for value adding sawing by internal scanning.

Impact of Stem Defect Agent Defects on Hardwood Wood Quality

Queensland's hardwood plantation industry is producing increasing volumes of sawlog, veneer and poles. Wood quality can sometimes be impaired in some plantation hardwoods when the growing trees are attacked by insect borers. Susceptibility to borer damage varies with the species as well as site conditions or location. The risk model developed from this project will enable the plantation industry to match tree species with appropriate growing conditions in Queensland.

SIP04 Defect Elimination Wheat

Defect elimination in wheat. Black point in bread wheat.

New A2+Mo4+O3 oxides with defect spinel structure

New A2+Mo4+O3 oxides for A = Mn, Co and Zn crystallizing in a defect spinel structure have been prepared by hydrogen-reduction of the corresponding AMoO4 oxides. X-ray powder diffraction intensity analysis of the zinc compound indicates that the cation distribution is (Zn)t[Zn1/3Mo4/3□1/3]oO4. The defect spinels are metastable decomposing to a mixture of A2Mo3O8 and AO at high temperatures. Electrical and magnetic properties of the spinel phases are reported.

Phase diagram of vortex matter in layered superconductors with tilted columnar pinning centers

We study the vortex matter phase diagram of a layered superconductor in the presence of columnar pinning defects, tilted with respect to the normal to the layers. We use numerical minimization of the free energy written as a functional of the time-averaged vortex density of the Ramakrishnan-Yussouff form, supplemented by the appropriate pinning potential. We study the case where the pin density is smaller than the areal vortex density. At lower pin concentrations, we find, for temperatures of the order of the melting temperature of the unpinned lattice, a Bose glass type phase which at lower temperatures converts, via a first-order transition, to a Bragg glass, while, at higher temperatures, it crosses over to an interstitial liquid. At somewhat higher concentrations, no transition to a Bragg glass is found even at the lowest temperatures studied. While qualitatively the behavior we find is similar to that obtained using the same procedures for columnar pins normal to the layers, there are important and observable quantitative differences, which we discuss.

Long-term outcomes of esophageal atresia

Esophageal atresia (EA), a common congenital anomaly comprising interrupted esophagus with or without a tracheoesophageal fistula (TEF), affects one in 2840 newborns. Over half have associated anomalies. After EA repair in infancy, gastroesophageal reflux (GER) and esophageal dysmotility and respiratory problems are common. As there exist no previous population-based long-term follow-up-studies on EA, its long-term sequelae are unclear. The aims of this study were to assess the cancer incidence (I), esophageal morbidity and function (II), respiratory morbidity (III), and the spinal defects (IV) in adults with repaired EA. All patients treated for EA at the Hospital for Children and Adolescents, University of Helsinki, from 1947 to 1985 were identified, and those alive with their native esophagus were contacted, and the first hundred who replied made up the study group. The patients were interviewed, they filled in symptom questionnaires, and they underwent esophageal endoscopy and manometry, pulmonary function tests, and a full orthopedic evaluation was performed with radiographs of the spine. The questionnaire was also sent by mail to adults with repaired EA not attending the clinical study, and to 287 general population-derived controls matched for age, gender, and municipality of residence. Incidence of cancer among the study population was evaluated from the population-based countrywide cancer registry. 169 (72%) adults with repaired EA replied; 101 (42%) (58 male) participated in the clinical studies at a median age of 36 years (range, 22-56). Symptomatic GER occurred in 34% and dysphagia in 85% of the patients and in 8% and 2% of the controls (P<0.001 for both). The main endoscopic findings included hiatal hernia (28%), Barrett´s esophagus (11%), esophagitis (8%), and stenotic anastomosis (8%). Histology revealed esophagitis in 25 individuals, and epithelial metaplasia in another 21. At immunohistochemistry, CDX2-positive columnar epithelial metaplasia was present in all 21 individuals, and 6 of these also demonstrated goblet cells and MUC2 positivity. In all histological groups, GER and dysphagia were equally common (P=ns). Esophageal manometry demonstrated non-propagating peristalsis in most of the patients, and low ineffective pressure of the distal esophageal body in all. The changes were significantly worse in those with epithelial metaplasia (P≤0.022). Anastomotic complications (OR 8.6-24, 95%CI 1.7-260, P=0.011-0.008), age (OR 20, 95%CI 1.3-310, P=0.034), low distal esophageal body pressure (OR 2.6, 95%CI 0.7-10, P=0.002), and defective esophageal peristalsis (OR 2.2, 95%CI 0.4-11, P=0.014) all predicted development of epithelial metaplasia. Despite the high incidence of esophageal metaplasia, none of the EA patients had suffered esophageal cancer, according to the Finnish Cancer Registry. Although three had had cancer (SIR, 1.0; 95% CI, 0.20-2.8). The overall cancer incidence among adults with repaired EA did not differ from that of the general Finnish population. Current respiratory symptoms occurred in 11% of the patients and 2% of the controls (P<0.001). Of the patients, 16%, and 6% of the controls had doctor-diagnosed asthma (P<0.001). A total of 56% and 70% of the patients and 20% and 50% of the controls had a history of pneumonia and of bronchitis (P<0.001 for both). Respiratory-related impaired quality of life was observable in 11% of the patients in contrast to 6% of the controls (P<0.001). PFT revealed obstruction in 21 of the patients, restriction in 21, and both in 36. A total of 41 had bronchial hyper-responsiveness (BHR) in HCT, and 15 others had an asthma-like response. Thoracotomy-induced rib fusion (OR 3.4, 95%CI 1.3-8.7, P=0.01) and GER-associated epithelial metaplasia in adulthood (OR 3.0, 95%CI 1.0-8.9, P=0.05) were the most significant risk factors for restrictive ventilatory defect. Vertebral anomalies were evident in 45 patients, predominating in the cervical spine in 38. The most significant risk factor for the occurrence of vertebral anomalies was any additional anomaly (OR 27, 95%C I8-100). Scoliosis (over 10 degrees) was observable in 56 patients, over 20 degrees in 11, and over 45 degrees in one. In the EA patients, risk for scoliosis over 10 degrees was 13-fold (OR 13, 95%CI 8.3-21) and over 20 degrees, 38-fold (OR 38, 95%CI 14-106) when compared to that of the general population. Thoracotomy-induced rib fusion (OR 3.6, 95%CI 0.7-19) and other associated anomalies (OR 2.1, 95%CI 0.9-2.9) were the strongest predictive factors for scoliosis. Significant esophageal morbidity associated with EA extends into adulthood. No association existed between the esophageal symptoms and histological findings. Surgical complications, increasing age, and impaired esophageal motility predicted development of epithelial metaplasia after repair of EA. According to our data, the risk for esophageal cancer is less than 500-fold that of the general population. However, the overall cancer incidence among adults with repaired EA did not differ from that of the general population. Adults with repaired EA have had significantly more respiratory symptoms and infections, as well as more asthma, and allergies than does the general population. Thoracotomy-induced rib fusion and GER-associated columnar epithelial metaplasia were the most significant risk factors for the restrictive ventilatory defect that occurred in over half the patients. Over half the patients with repaired EA are likely to develop scoliosis. Risk for scoliosis is 13-fold after repair of EA in relation to that of the general population. Nearly half the patients had vertebral anomalies. Most of these deformities were diagnosed neither in infancy nor during growth. The natural history of spinal deformities seems, however, rather benign, with spinal surgery rarely indicated.