955 resultados para antenna tag RFID green GRETA UWB eco-compatibile rectenna energy harvesting
Resumo:
Radio frequency (RF) energy harvesting is an emerging technology that will enable to drive the next generation of wireless sensor networks (WSNs) without the need of using batteries. In this paper, we present RF energy harvesting circuits specifically developed for GSM bands (900/1800) and a wearable dual-band antenna suitable for possible implementation within clothes for body worn applications. Besides, we address the development and experimental characterization of three different prototypes of a five-stage Dickson voltage multiplier (with match impedance circuit) responsible for harvesting the RF energy. Different printed circuit board (PCB) fabrication techniques to produce the prototypes result in different values of conversion efficiency. Therefore, we conclude that if the PCB fabrication is achieved by means of a rigorous control in the photo-positive method and chemical bath procedure applied to the PCB it allows for attaining better values for the conversion efficiency. All three prototypes (1, 2 and 3) can power supply the IRIS sensor node for RF received powers of -4 dBm, -6 dBm and -5 dBm, and conversion efficiencies of 20, 32 and 26%, respectively. © 2014 IEEE.
Resumo:
Dissertação de Mestrado em Engenharia Informática
Resumo:
This paper presents the development of the power electronics needed for the interaction between the electrical generator of a wind turbine and an isolated ac micro grid. In this system there are basically two types of receptors for the energy produced by the wind turbine, which are the loads connected to the isolated micro grid and the batteries used to store energy. There are basically two states in which the system will work. One of the states is when there is enough wind power to supply the loads and the extra energy is used to charge the batteries. The other state is when there is low wind power and the batteries have to compensate the lack of power, so that the isolated micro grid has enough power to supply at least the priority loads. In this paper are presented the hardware and the control algorithm for the developed system. The topology was previously tested in computer simulations, using the software PSIM 9.0, and then validated with the implementation of a laboratory prototype.
Resumo:
Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)
Resumo:
Green IT is a term that covers various tasks and concepts that are related to reducing the environmental impact of IT. At enterprise level, Green IT has significant potential to generate sustainable cost savings: the total amount of devices is growing and electricity prices are rising. The lifecycle of a computer can be made more environmentally sustainable using Green IT, e.g. by using energy efficient components and by implementing device power management. The challenge using power management at enterprise level is how to measure and follow-up the impact of power management policies? During the thesis a power management feature was developed to a configuration management system. The feature can be used to automatically power down and power on PCs using a pre-defined schedule and to estimate the total power usage of devices. Measurements indicate that using the feature the device power consumption can be monitored quite precisely and the power consumption can be reduced, which generates electricity cost savings and reduces the environmental impact of IT.
Resumo:
We examined the ecological distribution of macroalgal communities in streams using species groups (taxonomic units = algal phyla, and morphological = morphological types) with similar structures and functions instead of the species themselves. The study was conducted from June to July/2007 in two drainage basins located in mid-southern region of Paraná State , Brazil. Evaluations of macroalgal communities took into consideration the following spatial scales: the drainage basin (the Pedras river and Marrecas river basins), shading regime (open and shaded stream segments), mesohabitats (riffles and pools), and microhabitats (sampling units of 0.05m2). A total of 29 taxa (23 subgeneric, one generic, and five vegetative groups) were identified. On these, 12 taxa belong to Chlorophyta, 11 to Cyanobacteria, four to Heterokontophyta, and two to Rhodophyta. The proportions of morphological types were: 24% free filaments, 17.25% mats, tufts, gelatinous colonies, and gelatinous filaments, 7% crusts. In terms of spatial scales, we observed a predominance of Chlorophyta in open stream segments and Cyanobacteria in shaded stream segments, reflecting the loss of competitive advantage of green algae in sites with low energy availability. In the mesohabitats, the morphological types recorded in pools were predominantly poorly adapted to fast currents (free filaments), while those found in riffles (mats, tufts and gelatinous filaments) were highly resistant to fast water flows. As such, the use of species groupings based on algal taxonomy associated with morphological characteristics proved to be useful to understanding the distributions of these organisms in lotic environments.
Resumo:
Les personnes non-voyantes montrent dans les différents aspects de leurs vies qu’elles sont capables de s’adapter à la privation visuelle en utilisant les capacités intactes comme l’ouï ou le toucher. Elles montrent qu’elles peuvent bien évoluer dans leur environnement en absence de vision et démontrent même des fois des habiletés supérieures à celles des personnes voyantes. La recherche de ces dernières décennies s’est beaucoup intéressée aux capacités adaptatives des non-voyants surtout avec l’avènement des nouvelles techniques d’imagerie qui ont permis d’investiguer des domaines qui ne l’étaient pas ou l’étaient difficilement avant. Les capacités supérieures des non voyants dans l’utilisation plus efficace des informations auditives et tactiles semblent avoir leur base neuronale dans le dans le cortex visuel désafférenté, qui continu à être fonctionnel après la privation sensorielle et s’en trouve recruté pour le traitement de stimulations dites intermodales : auditives, tactiles et même montre une implication dans des processus de plus haut niveau, comme la mémoire ou le langage. Cette implication fonctionnelle intermodale résulte de la plasticité du cortex visuel c'est-à-dire sa capacité à changer sa structure, sa fonction et d’adapter ses interactions avec les autres systèmes en l’absence de vision. La plasticité corticale n’est pas exclusive au cortex visuel mais est un état permanent de tout le cerveau. Pour mesurer l’activité du cortex visuel des non voyants, une mesure d’excitabilité de ses neurones consiste à mesurer le temps de recouvrement de l’onde N1 en potentiels évoqués, qui est plus rapide chez les non voyants dans la modalité auditive. En effet, les réponses en potentiels et champs évoqués ont été utilisés en EEG/MEG pour mettre en évidence des changements plastiques dans le cortex visuel des non-voyants pour le traitement de stimuli dans les modalités auditives et tactiles. Ces réponses étaient localisées dans les régions postérieures chez les non voyants contrairement aux contrôles voyants. Un autre type de réponse auditive a reçu moins d’intérêt dans la recherche concernant la réorganisation fonctionnelle en relation avec la privation sensorielle, il s’agit de la réponse auditive oscillatoire (Auditory Steady-State Response ASSR). C’est une réponse qui a l’avantage d’osciller au rythme de stimulation et d’être caractérisé par une réponse des aires auditives étiquetée à la fréquence de stimulation. Cette étiquette se présente sous la forme qu’un pic d’énergie spectrale important qui culmine aux fréquences présentes dans la stimulation. Elle a également l’avantage d’être localisée dans les régions auditives primaires, de là tout changement de localisation de cette réponse chez des non voyants en faveur des régions visuelles pourrait être considéré comme une évidence de la réorganisation fonctionnelle qui s’opère après une privation sensorielle précoce. Le but de cette thèse est donc d’utiliser la réponse oscillatoire à l’écoute des sons modulés en amplitude (MA) pour mettre en évidence les corrélats de la réorganisation fonctionnelle dans le cortex visuel des non-voyants précoces. La modulation de la réponse auditive dans les régions visuelles nous permettra de montrer qu’une réorganisation est possible chez les non-voyants pour ce traitement intermodal. La première étude est une validation du paradigme expérimental «frequency tagged sounds». Il s’agit de montrer qu’une tâche de détection de changement dans la stimulation, permet de moduler la réponse ASSR aux sons modulés en amplitude en vue de l’utiliser dans les études chez les non voyants et dans les conditions d’une privation visuelle transitoire (avec les yeux bandés). Un groupe de sujets voyants ont réalisé une tâche de détection de changement dans la stimulation les yeux ouverts dans deux conditions : écoute active qui consiste à détecter un changement dans la fréquence porteuse de la modulation en appuyant avec l’index droit sur un bouton de réponse et une condition d’écoute passive. Les sons étaient présentés en écoute monaurale et dichotique. Les résultats ont montré une différence significative à l’occurrence du changement dans la stimulation en écoute dichotique seulement. Les schémas de plus grande réponse controlatérale et de suppression binaurale décrit dans la littérature ont été confirmés. La deuxième étude avait pour but de mettre en évidence une réorganisation rapide de la réponse ASSR chez un groupe de sujets voyants dans les conditions de privation visuelle transitoire de courte durée, par bandage des yeux pendant six heures. Le même protocole expérimental que la première étude a été utilisé en écoute active seulement. Les résultats montrent que dans ces conditions une modulation de la réponse corticale en écoute dichotique dans les régions visuelles est possible. Ces sources d’activité occipitale adoptent une propriété du cortex auditif qui est le battement binaural, c'est-à-dire l’oscillation de la réponse ASSR à la différence des fréquences présentées dans chaque oreille. Cet effet est présent chez la moitié des sujets testés. La représentation corticale des sources occipitales évolue durant la période de privation et montre un déplacement des sources d’activité dans la direction antéropostérieure à la fin de la période de privation. La troisième étude a permis de comparer le traitement de la réponse ASSR dans un groupe de non-voyants congénitaux à un groupe de voyants contrôles, pour investiguer les corrélats de la réorganisation fonctionnelle de cette réponse après une privation sensorielle de longue durée c'est-à-dire chez des non voyants congénitaux. Les résultats montrent des différences significatives dans la représentation spectrale de la réponse entre les deux groupes avec néanmoins des activations temporales importantes aussi bien chez les non voyants que chez les contrôles voyants. Des sources distribuées ont été localisées dans les régions associatives auditives dans les deux groupes à la différence des non voyants où il y avait en plus l’implication des régions temporales inférieures, connues comme étant activées par la vision des objets chez les voyants et font partie de la voie visuelle du quoi. Les résultats présentés dans le cadre de cette thèse vont dans le sens d’une réorganisation rapide de la réponse auditive oscillatoire après une privation visuelle transitoire de courte durée par l’implication des régions visuelles dans le traitement de la réponse ASSR par l’intermédiaire du démasquage de connections existantes entre le cortex visuel et le cortex auditif. La privation visuelle de longue durée, elle conduit à des changements plastiques, d’une part intra modaux par l’extension de l’activité aux régions temporales supérieures et médianes. D’autre part, elle induit des changements inter modaux par l’implication fonctionnelle des régions temporales inférieures visuelles dans le traitement des sons modulés en amplitude comme objets auditifs alors qu’elles sont normalement dédiées au traitement des objets visuels. Cette réorganisation passe probablement par les connections cortico-corticales.
Resumo:
Collection for the second coursework INFO2009. Includes: - Resource Set - Poster - Reference list
Resumo:
We present results from experimental price-setting oligopolies in which green firms undertake different levels of energy-saving investments motivated by public subsidies and demand-side advantages. We find that consumers reveal higher willingness to pay for greener sellers’ products. This observation in conjunction to the fact that greener sellers set higher prices is compatible with the use and interpretation of energy-saving behaviour as a differentiation strategy. However, sellers do not exploit the resulting advantage through sufficiently high price-cost margins, because they seem trapped into “run to stay still” competition. Regarding the use of public subsidies to energy-saving sellers we uncover an undesirable crowding-out effect of consumers’ intrinsic tendency to support green manufacturers. Namely, consumers may be less willing to support a green seller whose energy-saving strategy yields a direct financial benefit. Finally, we disentangle two alternative motivations for consumer’s attractions to pro-social firms; first, the self-interested recognition of the firm’s contribution to the public and private welfare and, second, the need to compensate a firm for the cost entailed in each pro-social action. Our results show the prevalence of the former over the latter.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Il contesto generale nel quale è inserito tale elaborato di tesi è la tecnologia RFID; se ne fa una disamina completa, partendo dalla ricostruzione delle tappe storiche che hanno portato alla sua diffusione. Viene data particolare enfasi alle differenze esistenti tra le varie tipologie, alle frequenze a cui possono operare i dispositivi e agli standard legislativi vigenti. Vengono enunciati inoltre i costi dei dispositivi e le critiche verso la tecnologia. L'obiettivo della tesi è quello di valutare la possibilità di realizzare un meccanismo di monitoraggio a breve raggio di dispositivi dotati di rfid: per questo la visione che si da della tecnologia è il più completa possibile. La prerogativa di lunga durata richiesta dal sistema ha portato a valutare se potesse essere utile integrare un meccanismo di recupero energia; per questo si prosegue con una disamina dell'energy harvesting, fornendo dettagli su tutte le fonti da cui è possibile recuperare energia e casi pratici di meccanismi realizzati, sia che questi siano già presenti sul mercato, sia che siano solo risultati di ricerche e prototipi. Si conclude quindi il lavoro valutando le effettive possibilità di realizzazione del sistema, evidenziando le scelte consigliate per una migliore esecuzione.
Resumo:
Progetto di un circuito convertitore di potenza ottimizzato per essere alimentato da un antenna a RF in grado di estrarre potenza dalle bande a 900Mhz, 1750 MHz e 2450 MHz
Resumo:
The present PhD thesis exploits the design skills I have been improving since my master thesis’ research. A brief description of the chapters’ content follows. Chapter 1: the simulation of a complete front–end is a very complex problem and, in particular, is the basis upon which the prediction of the overall performance of the system is possible. By means of a commercial EM simulation tool and a rigorous nonlinear/EM circuit co–simulation based on the Reciprocity Theorem, the above–mentioned prediction can be achieved and exploited for wireless links characterization. This will represent the theoretical basics of the entire present thesis and will be supported by two RF applications. Chapter 2: an extensive dissertation about Magneto–Dielectric (MD) materials will be presented, together with their peculiar characteristics as substrates for antenna miniaturization purposes. A designed and tested device for RF on–body applications will be described in detail. Finally, future research will be discussed. Chapter 3: this chapter will deal with the issue regarding the exploitation of renewable energy sources for low–energy consumption devices. Hence the problem related to the so–called energy harvesting will be tackled and a first attempt to deploy THz solar energy in an innovative way will be presented and discussed. Future research will be proposed as well. Chapter 4: graphene is a very promising material for devices to be exploited in the RF and THz frequency range for a wide range of engineering applications, including those ones marked as the main research goal of the present thesis. This chapter will present the results obtained during my research period at the National Institute for Research and Development in Microtechnologies (IMT) in Bucharest, Romania. It will concern the design and manufacturing of antennas and diodes made in graphene–based technology for detection/rectification purposes.
Resumo:
ZnO has proven to be a multifunctional material with important nanotechnological applications. ZnO nanostructures can be grown in various forms such as nanowires, nanorods, nanobelts, nanocombs etc. In this work, ZnO nanostructures are grown in a double quartz tube configuration thermal Chemical Vapor Deposition (CVD) system. We focus on functionalized ZnO Nanostructures by controlling their structures and tuning their properties for various applications. The following topics have been investigated: 1. We have fabricated various ZnO nanostructures using a thermal CVD technique. The growth parameters were optimized and studied for different nanostructures. 2. We have studied the application of ZnO nanowires (ZnONWs) for field effect transistors (FETs). Unintentional n-type conductivity was observed in our FETs based on as-grown ZnO NWs. We have then shown for the first time that controlled incorporation of hydrogen into ZnO NWs can introduce p-type characters to the nanowires. We further found that the n-type behaviors remained, leading to the ambipolar behaviors of hydrogen incorporated ZnO NWs. Importantly, the detected p- and n- type behaviors are stable for longer than two years when devices were kept in ambient conditions. All these can be explained by an ab initio model of Zn vacancy-Hydrogen complexes, which can serve as the donor, acceptors, or green photoluminescence quencher, depend on the number of hydrogen atoms involved. 3. Next ZnONWs were tested for electron field emission. We focus on reducing the threshold field (Eth) of field emission from non-aligned ZnO NWs. As encouraged by our results on enhancing the conductivity of ZnO NWs by hydrogen annealing described in Chapter 3, we have studied the effect of hydrogen annealing for improving field emission behavior of our ZnO NWs. We found that optimally annealed ZnO NWs offered much lower threshold electric field and improved emission stability. We also studied field emission from ZnO NWs at moderate vacuum levels. We found that there exists a minimum Eth as we scale the threshold field with pressure. This behavior is explained by referring to Paschen’s law. 4. We have studied the application of ZnO nanostructures for solar energy harvesting. First, as-grown and (CdSe) ZnS QDs decorated ZnO NBs and ZnONWs were tested for photocurrent generation. All these nanostructures offered fast response time to solar radiation. The decoration of QDs decreases the stable current level produced by ZnONWs but increases that generated by NBs. It is possible that NBs offer more stable surfaces for the attachment of QDs. In addition, our results suggests that performance degradation of solar cells made by growing ZnO NWs on ITO is due to the increase in resistance of ITO after the high temperature growth process. Hydrogen annealing also improve the efficiency of the solar cells by decreasing the resistance of ITO. Due to the issues on ITO, we use Ni foil as the growth substrates. Performance of solar cells made by growing ZnO NWs on Ni foils degraded after Hydrogen annealing at both low (300 °C) and high (600 °C) temperatures since annealing passivates native defects in ZnONWs and thus reduce the absorption of visible spectra from our solar simulator. Decoration of QDs improves the efficiency of such solar cells by increasing absorption of light in the visible region. Using a better electrolyte than phosphate buffer solution (PBS) such as KI also improves the solar cell efficiency. 5. Finally, we have attempted p-type doping of ZnO NWs using various growth precursors including phosphorus pentoxide, sodium fluoride, and zinc fluoride. We have also attempted to create p-type carriers via introducing interstitial fluorine by annealing ZnO nanostructures in diluted fluorine gas. In brief, we are unable to reproduce the growth of reported p-type ZnO nanostructures. However; we have identified the window of temperature and duration of post-growth annealing of ZnO NWs in dilute fluorine gas which leads to suppression of native defects. This is the first experimental effort on post-growth annealing of ZnO NWs in dilute fluorine gas although this has been suggested by a recent theory for creating p-type semiconductors. In our experiments the defect band peak due to native defects is found to decrease by annealing at 300 °C for 10 – 30 minutes. One of the major future works will be to determine the type of charge carriers in our annealed ZnONWs.
Resumo:
Für die Optimierung und somit Energieeinsparung beim Trocknen von Grüngut wurde eine mechanische Vorentwässerung entwickelt. Dieser Schritt wurde notwendig, da sich die politischen und ökonomischen Rahmenbedingungen, durch Subventionskürzungen und steigenden Energiepreisen, zu Ungunsten der Trocknungsbetriebe verändert haben und eine rein thermische Trocknung kaum noch rentabel ist. In einem gemeinsamen Kooperationsprojekt zwischen der TU Chemnitz und der fömat GmbH entstand eine Schneckenpresse speziell für Grüngut ohne dabei wichtige Nährstoffe beim Entwässern mit auszuspülen. Seit 2010 ist diese Fördereinrichtung in den Trocknungsprozess vollständig integriert und es konnten während einer vollständigen Trocknungssaison in ca. 1.800 Betriebsstunden mehr als 10.500 m³ Wasser aus 47.200 t Grüngut abpressen werden. Dies hatte zur Folge, dass eine Energieeinsparung von über 25 % erreicht wird. Die Qualität des Grünfutters wurde dabei nicht beeinträchtigt und die wichtigen Nährstoffe blieben im Grüngut nahezu vollständig erhalten.