Fast-Decodable MIDO Codes With Large Coding Gain

In this paper, a new method is proposed to obtain full-diversity, rate-2 (rate of two complex symbols per channel use) space-time block codes (STBCs) that are full-rate for multiple input double output (MIDO) systems. Using this method, rate-2 STBCs for 4 x 2, 6 x 2, 8 x 2, and 12 x 2 systems are constructed and these STBCs are fast ML-decodable, have large coding gains, and STBC-schemes consisting of these STBCs have a non-vanishing determinant (NVD) so that they are DMT-optimal for their respective MIDO systems. It is also shown that the Srinath-Rajan code for the 4 x 2 system, which has the lowest ML-decoding complexity among known rate-2 STBCs for the 4x2 MIDO system with a large coding gain for 4-/16-QAM, has the same algebraic structure as the STBC constructed in this paper for the 4 x 2 system. This also settles in positive a previous conjecture that the STBC-scheme that is based on the Srinath-Rajan code has the NVD property and hence is DMT-optimal for the 4 x 2 system.

Large-MIMO Receiver based on Linear Regression of MMSE Residual

Multiple input multiple output (MIMO) systems with large number of antennas have been gaining wide attention as they enable very high throughputs. A major impediment is the complexity at the receiver needed to detect the transmitted data. To this end we propose a new receiver, called LRR (Linear Regression of MMSE Residual), which improves the MMSE receiver by learning a linear regression model for the error of the MMSE receiver. The LRR receiver uses pilot data to estimate the channel, and then uses locally generated training data (not transmitted over the channel), to find the linear regression parameters. The proposed receiver is suitable for applications where the channel remains constant for a long period (slow-fading channels) and performs quite well: at a bit error rate (BER) of 10(-3), the SNR gain over MMSE receiver is about 7 dB for a 16 x 16 system; for a 64 x 64 system the gain is about 8.5 dB. For large coherence time, the complexity order of the LRR receiver is the same as that of the MMSE receiver, and in simulations we find that it needs about 4 times as many floating point operations. We also show that further gain of about 4 dB is obtained by local search around the estimate given by the LRR receiver.

The mechanism of PEO process on Al–Si alloys with the bulk primary silicon

This study focuses on mechanism of ceramic coating on Al-Si alloys with bulk primary Si using plasma electrolytic oxidation (PEO) technology. Al-Si alloys with 27-32% Si in weight were used as substrates. The morphologies, composition and microstructure of PEO coatings were investigated by scanning electron microscopy (SEM) with energy dispersive X-ray system (EDX). Results showed that the PEO process had four different stages. The effect of bulk Si is greatly on the morphology and composition of coatings at first three stages. Anodic oxide films formed on Al and Si phases, respectively. When the voltage exceeded 40 V, glow appeared and concentrated on the localized zone of interface of Al and Si phase. Al-Si-O compounds formed and covered on the dendrite Si phase surface, and the coating on bulk Si, which was silicon oxide, was rougher than that on other phase. If the treatment time was long enough, the coatings with uniform surface morphologies and elements distribution will be obtained but the microstructure of inner layer is looser due to the bulk Si.

INVESTIGATION OF THE ELECTRICAL AND MAGNETIC-PROPERTIES OF YSR2-XCAXV3O9-Y

All the members of the solid solution of YSr2-xCaxV3O9-y have the orthorhombic symmetry. Their electrical and magnetic properties have been studied. The magnetic susceptibility and electrical resistivity increase gradually with x. The system shows paramagnetic behavior both at 300 K and at 77 K. It is shown that a change of valence state of vanadium obviously affects the electrical and magnetic properties of the solid solution.

A LabVIEW Platform for Preclinical Imaging Using Digital Subtraction Angiography and Micro-CT.

CT and digital subtraction angiography (DSA) are ubiquitous in the clinic. Their preclinical equivalents are valuable imaging methods for studying disease models and treatment. We have developed a dual source/detector X-ray imaging system that we have used for both micro-CT and DSA studies in rodents. The control of such a complex imaging system requires substantial software development for which we use the graphical language LabVIEW (National Instruments, Austin, TX, USA). This paper focuses on a LabVIEW platform that we have developed to enable anatomical and functional imaging with micro-CT and DSA. Our LabVIEW applications integrate and control all the elements of our system including a dual source/detector X-ray system, a mechanical ventilator, a physiological monitor, and a power microinjector for the vascular delivery of X-ray contrast agents. Various applications allow cardiac- and respiratory-gated acquisitions for both DSA and micro-CT studies. Our results illustrate the application of DSA for cardiopulmonary studies and vascular imaging of the liver and coronary arteries. We also show how DSA can be used for functional imaging of the kidney. Finally, the power of 4D micro-CT imaging using both prospective and retrospective gating is shown for cardiac imaging.

Mineralogical and chemical characterization of some vermiculites from the mozambique belt of tanzania for agricultural use

Vermiculite minerals are locally available in the Mozambique Belt of Tanzania but are not currently commercially exploited. In part this may be due to lack of any precise characterization. This study was carried out as a first step to assess the suitability of these vermiculites for crop production by characterization of their mineralogical and chemical compositions. X-ray diffraction and scanning electron microscopy combined with an energydispersive X-ray system were used to establish the mineralogy. Electron microprobe analysis and inductively coupled plasma-mass spectrometry were used to study the chemical compositions and to identify any possible issues related to chemical composition that might affect their use if applied as soil conditioners. The samples were characterized as vermiculites and hydrobiotites with a wide variety of accessory minerals. Accessory minerals that might be of some concern are galena, fibrous amphiboles and sepiolite. The total levels of Ni in all vermiculites, and Cr in some, were also found to be high relative to common European standards and this might limit their potential as soil conditioners. It is clear that a field assessment of the bioavailability of various elements would be necessary before decisions relating to potential agricultural use could be made. © 2009 The Mineralogical Society.

Effect of La2O3 doping on the microstructure and electrical properties of a SnO2-based varistor

The effect of La2O3 addition on the densification and electrical properties of the (0.9895 - x) SnO2 + 0.01 CoO + 0.0005 Nb2O5 + x La2O5 system, where x = 0.0005 or 0.00075, was considered in this study. The samples were sintered at 1300 degreesC for 2 and 4 h and a single SnO2 phase was identified by X-ray diffraction. Microstructure analysis by scanning electron microscopy showed that the affect of La2O3 addition is to decrease the SnO2 grain size. J versus E curves indicated that the system exhibits a varistor behavior and the effect of La2O3 is to increase both the non-linear coefficient (alpha) and the breakdown voltage (E-2). Considering the Schottky thermionic emission model the potential height and the width were estimated. The addition of small amounts of La2O3 to the basic system increases the potential barrier height and decreases both grain size and potential barrier width. (C) 2001 Kluwer Academic Publishers.

Influence of cutting instruments and adhesive systems on hybrid layer formation.

Influence of cutting instruments and The aim of this study was to analyze the hybrid layer in noncarious dentin prepared by different cutting instruments and restored with composite resin. The cavities were randomly prepared in 40 specimens using a high-speed diamond bur (KG Sorensen 1013) and an ultrasonic tip (CVDentus C22). The cavities were restored with composite resin by varying the adhesive system between the Adper™ Single Bond (2 x 1 system, primer+adhesive) and the Prompt L-Pop™ (3 x 1 system, self-etching). The restorations were hemisected longitudinally and analyzed in the SEM (Scanning electron microscopy) in order to evaluate the hybrid layer and resinous tags characteristics, using scores ranging from 1 to 6. The Pearson test revealed a high correlation coefficient and good significance levels for both intra- and inter-raters values (r=0.90). The data were statistically analyzed using the Mann-Whitney test (P≤0.05). A larger proportion of regular hybrid layers with numerous tags were observed in the dentin prepared using the high-speed diamond burs and restored with a 2 × 1 adhesive system. Alternatively, the 3 × 1 adhesive system promoted the generation of a thin hybrid layer with few tags. After preparation using an ultrasonic tip revealed few or no tags after the preparation and 2 × 1 or 3 × 1 adhesive system application. The high-speed diamond burs produced a dentin surface that was more favorable to restorative material adhesion than the ultrasonic tips, regardless of the adhesive system used.

Produção de carvão ativado a partir da biomassa residual da castanha do Brasil (Bertholletia excelsa L.) para adsorção de cobre (II)

Produziu-se carvão ativado a partir da casca da castanha-do-Brasil (Bertholletia excelsa L.) para ser utilizado na remoção de cobre (II), no processo de adsorção em sistema de batelada. A casca é resíduo do beneficiamento da castanha, que foi coletada, selecionada, lavada em água corrente e depois secada em estufa a 150ºC por 24 h. Os carvões foram carbonizados a 400 ºC por 3 h e ativados termicamente a 800ºC em tempos de 1, 2 e 3 h, quando receberam as respectivas codificaçõesCA1, CA2 e CA3. Depois foram caracterizadas quanto: à área superficial específica, ao volume e tamanho de poros, à difração de raios-X, à microscopia eletrônica de varredura (MEV) acoplada ao EDS(sistema de energia dispersiva por raios-X) e à espectroscopia de infravermelho com transformada de Fourier (FTIR). Ensaios preliminares foram realizados para avaliar a eficiência dos carvões quanto à remoção de cobre (II) em solução sintética de concentração inicial 50 mg L^-1. Como os resultados foram satisfatórios para CA1, CA2 e CA3 (93,43, 97,23 e 96, 92 % para os respectivos carvões), decidiu-se pelo que apresentou maior percentual de remoção. O CA2 foi produzido e caracterizado quanto: às densidades reais e aparentes, à porosidade em leito fixo, ao pH, à umidade (em base úmida), às cinzas, ao carbono fixo e aos grupos funcionais pelo método de Boehm. Realizaram-se ensaios para determinar a eficiência de remoção de cobre (II) quanto à influência do diâmetro da partícula do carvão, ao pH da solução, à influência do tempo de contato e à variação da concentração inicial. Os resultados de maior percentual de remoção foram para o diâmetro 0,595≤D≤1,19mm, pH 5,09, tempo de 5 min e concentrações de 50, 100 e 150mg L^-1.O modelo cinético de adsorção que melhor se ajustou aos dados foi o de pseudo2^a ordem. Os dados experimentais apresentaram bom ajuste aos modelos matemáticos de isotermas de Langmuir e Frendlich. Sendo assim, obteve-se carvão ativado de baixo custo a partir da casca da castanha-do-Brasil a qual apresentou boa eficiência na remoção de cobre (II) (acima de 90 % para maioria das análises) possibilitando também a utilização no tratamento de efluentes.

The Effects of Palmitic Acid on Nitric Oxide Production by Rat Skeletal Muscle: Mechanism via Superoxide and iNOS Activation

Background: Increased plasma concentrations of free fatty acids (FFA) can lead to insulin resistance in skeletal muscle, impaired effects on mitochondrial function, including uncoupling of oxidative phosphorylation and decrease of endogenous antioxidant defenses. Nitric oxide (NO) is a highly diffusible gas that presents a half-life of 5-10 seconds and is involved in several physiological and pathological conditions. The effects of palmitic acid on nitric oxide (NO) production by rat skeletal muscle cells and the possible mechanism involved were investigated. Methods: Primary cultured rat skeletal muscle cells were treated with palmitic acid and NO production was assessed by nitrite measurement (Griess method) and 4,5-diaminofluorescein diacetate (DAF-2-DA) assay. Nuclear factor-kappa B (NF-kappa B) activation was evaluated by electrophoretic mobility shift assay and iNOS protein content by western blotting. Results: Palmitic acid treatment increased nitric oxide production. This effect was abolished by treatment with NOS inhibitors, L-nitro-arginine (LNA) and L-nitro-arginine methyl esther (L-NAME). NF-kappa B activation and iNOS content were increased due to palmitic acid treatment. The participation of superoxide on nitric oxide production was investigated by incubating the cells with DAF-2-DA in the presence or absence of palmitic acid, a superoxide generator system (X-XO), a mixture of NOS inhibitors and SOD-PEG (superoxide dismutase linked to polyethylene glycol). Palmitic acid and X-XO system increased NO production and this effect was abolished when cells were treated with NOS inhibitors and also with SOD-PEG. Conclusions: In summary, palmitic acid stimulates NO production in cultured skeletal muscle cells through production of superoxide, nuclear factor-kappa B activation and increase of iNOS protein content. Copyright (C) 2012 S. Karger AG, Basel

XCSurf: Riprogettazione dell'Interfaccia Utente

Il Progetto XCModel, che da dieci anni si sviluppa e si perfeziona col contributo di varie persone, consente la progettazione di scene 3D e la resa fotorealistica. Esso si appoggia sulle funzionalita' grafiche di X-Window in Linux: si tratta di un ambiente in costante evoluzione, dovuta sia alle continue innovazioni hardware che ai cambiamenti degli standard. XCModel e' composto da vari pacchetti, ognuno dei quali specializzato nel trattare un particolare aspetto della modellazione o della resa (curve, superfici, textures, luci, ...) e che si presentano come applicazioni dotate di una sofisticata interfaccia grafica. Tutte attingono alle funzioni della Libreria XTools, che fornisce numerose primitive grafiche facenti uso delle potenzialita' di X-Window. I recenti cambiamenti nelle specifiche di X-Org, ed in particolare la de- standardizzazione del backing-store, ha obbligato il team di XCModel ad una consistente riprogettazione di XTools e di tutti i pacchetti che su di esso s'appoggiano. S'e' colta l'occasione per un massiccio debugging e per modificare i pacchetti in base alle impressioni emerse nel corso degli anni da parte degli utilizzatori, primi tra tutti gli studenti del corso di Grafica tenuto dal Prof. Giulio Casciola, project-manager di XCModel: questa e' un'ulteriore testimonianza del continuo adattamento e dell'aggiornabilita' del Progetto! Nella fattispecie, ci si occupera' delle modifiche effettuate in particolare al pacchetto XCSurf, finalizzato alla creazione ed alla modifica di curve e superfici 3D da utilizzarsi successivamente per la creazione delle scene: tale pacchetto e' di fatto risultato il pie' avulso dalle specifiche di XTools, il che ha costretto ad un massiccio intervento al codice del programma, ma d'altro canto ha consentito una standardizzazione del pacchetto in linea con gli altri, in particolare ridisegnandone l'interfaccia. Nel primo capitolo si effettuera' una veloce panoramica dell'ambiente XCModel e delle problematiche emerse dai cambiamenti degli standard di X-Window. Il secondo capitolo affrontera' un'ampia analisi dell'hardware, del software e dei paradigmi che caratterizzano la grafica interattiva, e gli ambienti necessari per interagire con essa ed esaminando i vari obiettivi raggiungibili. Infine, il terzo capitolo analizzera' nel dettaglio le modifiche effettuate ai pacchetti di XCModel ed in particolare ad XCSurf per l'adattamento ai nuovi standard, nel rispetto delle politiche e delle linee guida dettate dalla grafica interattiva.

Hermann Senator : (mit Porträt)

X. Y.

Der Wiener Tramway-Strike : (ein Epilog)

x. y.

(Ein Feuerschein für Zion) [Rezension]

x. y.

Mathematical analysis of a model of chemotaxis arising from morphogenesis

We consider non-negative solution of a chemotaxis system with non constant chemotaxis sensitivity function X. This system appears as a limit case of a model formorphogenesis proposed by Bollenbach et al. (Phys. Rev. E. 75, 2007).Under suitable boundary conditions, modeling the presence of a morphogen source at x=0, we prove the existence of a global and bounded weak solution using an approximation by problems where diffusion is introduced in the ordinary differential equation. Moreover,we prove the convergence of the solution to the unique steady state provided that ? is small and ? is large enough. Numerical simulations both illustrate these results and give rise to further conjectures on the solution behavior that go beyond the rigorously proved statements.