Interactive Augmentation of Live Images using a HDR Stereo Camera

Adding virtual objects to real environments plays an important role in todays computer graphics: Typical examples are virtual furniture in a real room and virtual characters in real movies. For a believable appearance, consistent lighting of the virtual objects is required. We present an augmented reality system that displays virtual objects with consistent illumination and shadows in the image of a simple webcam. We use two high dynamic range video cameras with fisheye lenses permanently recording the environment illumination. A sampling algorithm selects a few bright parts in one of the wide angle images and the corresponding points in the second camera image. The 3D position can then be calculated using epipolar geometry. Finally, the selected point lights are used in a multi pass algorithm to draw the virtual object with shadows. To validate our approach, we compare the appearance and shadows of the synthetic objects with real objects.

Efficient Bimanual Symmetric 3D Manipulation for Bare-Handed Interaction

Recently, stable markerless 6 DOF video based handtracking devices became available. These devices simultaneously track the positions and orientations of both user hands in different postures with at least 25 frames per second. Such hand-tracking allows for using the human hands as natural input devices. However, the absence of physical buttons for performing click actions and state changes poses severe challenges in designing an efficient and easy to use 3D interface on top of such a device. In particular, for coupling and decoupling a virtual object’s movements to the user’s hand (i.e. grabbing and releasing) a solution has to be found. In this paper, we introduce a novel technique for efficient two-handed grabbing and releasing objects and intuitively manipulating them in the virtual space. This technique is integrated in a novel 3D interface for virtual manipulations. A user experiment shows the superior applicability of this new technique. Last but not least, we describe how this technique can be exploited in practice to improve interaction by integrating it with RTT DeltaGen, a professional CAD/CAS visualization and editing tool.

Comparison of 2D and 3D GUI Widgets for Stereoscopic Multitouch Setups

Recent developments in the area of interactive entertainment have suggested to combine stereoscopic visualization with multi-touch displays, which has the potential to open up new vistas for natural interaction with interactive three-dimensional (3D) applications. However, the question arises how the user interfaces for system control in such 3D setups should be designed in order to provide an effective user experience. In this article we introduce 3D GUI widgets for interaction with stereoscopic touch displays. The design of the widgets was inspired to skeuomorphism and affordances in such a way that the user should be able to operate the virtual objects in the same way as their real-world equivalents. We evaluate the developed widgets and compared them with their 2D counterparts in the scope of an example application in order to analyze the usability of and user behavior with the widgets. The results reveal differences in user behavior with and without stereoscopic display during touch interaction, and show that the developed 2D as well as 3D GUI widgets can be used effectively in different applications.

Magic cards: a new augmented reality approach

Augmented reality (AR) commonly uses markers for detection and tracking. Such multimedia applications associate each marker with a virtual 3D model stored in the memory of the camera-equipped device running the application. Application users are limited in their interactions, which require knowing how to design and program 3D objects. This generally prevents them from developing their own entertainment AR applications. The Magic Cards application solves this problem by offering an easy way to create and manage an unlimited number of virtual objects that are encoded on special markers.

Visual attention and perception models for assessing quality in 2D and 3D stereoscopic video

La medida de calidad de vídeo sigue siendo necesaria para definir los criterios que caracterizan una señal que cumpla los requisitos de visionado impuestos por el usuario. Las nuevas tecnologías, como el vídeo 3D estereoscópico o formatos más allá de la alta definición, imponen nuevos criterios que deben ser analizadas para obtener la mayor satisfacción posible del usuario. Entre los problemas detectados durante el desarrollo de esta tesis doctoral se han determinado fenómenos que afectan a distintas fases de la cadena de producción audiovisual y tipo de contenido variado. En primer lugar, el proceso de generación de contenidos debe encontrarse controlado mediante parámetros que eviten que se produzca el disconfort visual y, consecuentemente, fatiga visual, especialmente en lo relativo a contenidos de 3D estereoscópico, tanto de animación como de acción real. Por otro lado, la medida de calidad relativa a la fase de compresión de vídeo emplea métricas que en ocasiones no se encuentran adaptadas a la percepción del usuario. El empleo de modelos psicovisuales y diagramas de atención visual permitirían ponderar las áreas de la imagen de manera que se preste mayor importancia a los píxeles que el usuario enfocará con mayor probabilidad. Estos dos bloques se relacionan a través de la definición del término saliencia. Saliencia es la capacidad del sistema visual para caracterizar una imagen visualizada ponderando las áreas que más atractivas resultan al ojo humano. La saliencia en generación de contenidos estereoscópicos se refiere principalmente a la profundidad simulada mediante la ilusión óptica, medida en términos de distancia del objeto virtual al ojo humano. Sin embargo, en vídeo bidimensional, la saliencia no se basa en la profundidad, sino en otros elementos adicionales, como el movimiento, el nivel de detalle, la posición de los píxeles o la aparición de caras, que serán los factores básicos que compondrán el modelo de atención visual desarrollado. Con el objetivo de detectar las características de una secuencia de vídeo estereoscópico que, con mayor probabilidad, pueden generar disconfort visual, se consultó la extensa literatura relativa a este tema y se realizaron unas pruebas subjetivas preliminares con usuarios. De esta forma, se llegó a la conclusión de que se producía disconfort en los casos en que se producía un cambio abrupto en la distribución de profundidades simuladas de la imagen, aparte de otras degradaciones como la denominada “violación de ventana”. A través de nuevas pruebas subjetivas centradas en analizar estos efectos con diferentes distribuciones de profundidades, se trataron de concretar los parámetros que definían esta imagen. Los resultados de las pruebas demuestran que los cambios abruptos en imágenes se producen en entornos con movimientos y disparidades negativas elevadas que producen interferencias en los procesos de acomodación y vergencia del ojo humano, así como una necesidad en el aumento de los tiempos de enfoque del cristalino. En la mejora de las métricas de calidad a través de modelos que se adaptan al sistema visual humano, se realizaron también pruebas subjetivas que ayudaron a determinar la importancia de cada uno de los factores a la hora de enmascarar una determinada degradación. Los resultados demuestran una ligera mejora en los resultados obtenidos al aplicar máscaras de ponderación y atención visual, los cuales aproximan los parámetros de calidad objetiva a la respuesta del ojo humano. ABSTRACT Video quality assessment is still a necessary tool for defining the criteria to characterize a signal with the viewing requirements imposed by the final user. New technologies, such as 3D stereoscopic video and formats of HD and beyond HD oblige to develop new analysis of video features for obtaining the highest user’s satisfaction. Among the problems detected during the process of this doctoral thesis, it has been determined that some phenomena affect to different phases in the audiovisual production chain, apart from the type of content. On first instance, the generation of contents process should be enough controlled through parameters that avoid the occurrence of visual discomfort in observer’s eye, and consequently, visual fatigue. It is especially necessary controlling sequences of stereoscopic 3D, with both animation and live-action contents. On the other hand, video quality assessment, related to compression processes, should be improved because some objective metrics are adapted to user’s perception. The use of psychovisual models and visual attention diagrams allow the weighting of image regions of interest, giving more importance to the areas which the user will focus most probably. These two work fields are related together through the definition of the term saliency. Saliency is the capacity of human visual system for characterizing an image, highlighting the areas which result more attractive to the human eye. Saliency in generation of 3DTV contents refers mainly to the simulated depth of the optic illusion, i.e. the distance from the virtual object to the human eye. On the other hand, saliency is not based on virtual depth, but on other features, such as motion, level of detail, position of pixels in the frame or face detection, which are the basic features that are part of the developed visual attention model, as demonstrated with tests. Extensive literature involving visual comfort assessment was looked up, and the development of new preliminary subjective assessment with users was performed, in order to detect the features that increase the probability of discomfort to occur. With this methodology, the conclusions drawn confirmed that one common source of visual discomfort was when an abrupt change of disparity happened in video transitions, apart from other degradations, such as window violation. New quality assessment was performed to quantify the distribution of disparities over different sequences. The results confirmed that abrupt changes in negative parallax environment produce accommodation-vergence mismatches derived from the increasing time for human crystalline to focus the virtual objects. On the other side, for developing metrics that adapt to human visual system, additional subjective tests were developed to determine the importance of each factor, which masks a concrete distortion. Results demonstrated slight improvement after applying visual attention to objective metrics. This process of weighing pixels approximates the quality results to human eye’s response.

Realidade aumentada aplicada em bibliotecas: multiplicidade no acesso a informação

Conceitua Realidade Aumentada do ponto de vista histórico de vários autores e como surgiu esse segmento através da evolução tecnológica até os dias atuais. Aborda seu funcionamento, como também, seus sistemas e aplicações em diversos campos de pesquisas e estudos científicos. Diferencia Realidade Aumentada de Realidade Virtual, visando melhor esclarecimento entre ambas na intenção de descaracterizá-las com uma única “realidade”. Apresenta a Realidade Aumentada e sua aplicação dentro de um contexto de uma unidade de informação, promovendo uma melhor interação com os usuários e as adaptações pelas quais as bibliotecas terão que passar futuramente para se adequarem a “explosão” tecnológica. Descreve o funcionamento da biblioteca ARToolKIT, baseada em RA e suas principais etapas de funcionamento para visualização de objetos virtuais em 3D. Exemplifica os benefícios que uma unidade de informação, que utiliza Realidade Aumentada, promove aos usuários portadores de deficiência, além de sua inclusão no meio digital e sua inserção no mercado de trabalho

La loi applicable aux transferts de biens virtuels

Thèse réalisée en cotutelle avec l'université Paris1-Sorbonne

Realidade aumentada aplicada em bibliotecas: multiplicidade no acesso a informação

Conceitua Realidade Aumentada do ponto de vista histórico de vários autores e como surgiu esse segmento através da evolução tecnológica até os dias atuais. Aborda seu funcionamento, como também, seus sistemas e aplicações em diversos campos de pesquisas e estudos científicos. Diferencia Realidade Aumentada de Realidade Virtual, visando melhor esclarecimento entre ambas na intenção de descaracterizá-las com uma única “realidade”. Apresenta a Realidade Aumentada e sua aplicação dentro de um contexto de uma unidade de informação, promovendo uma melhor interação com os usuários e as adaptações pelas quais as bibliotecas terão que passar futuramente para se adequarem a “explosão” tecnológica. Descreve o funcionamento da biblioteca ARToolKIT, baseada em RA e suas principais etapas de funcionamento para visualização de objetos virtuais em 3D. Exemplifica os benefícios que uma unidade de informação, que utiliza Realidade Aumentada, promove aos usuários portadores de deficiência, além de sua inclusão no meio digital e sua inserção no mercado de trabalho

La loi applicable aux transferts de biens virtuels

Thèse réalisée en cotutelle avec l'université Paris1-Sorbonne

PERSONAL(ONTO) : Personalizing the Learning Process in Virtual Environments by means of Adaptive Formative Itineraries based on Reusable Learning Objects and Ontologies TIN2006-15107-C02

Personalization in e-learning allows the adaptation of contents, learning strategiesand educational resources to the competencies, previous knowledge or preferences of the student. This project takes a multidisciplinary perspective for devising standards-based personalization capabilities into virtual e-learning environments, focusing on the conceptof adaptive learning itinerary, using reusable learning objects as the basis of the system and using ontologies and semantic web technologies.

Benefits & drawbacks of different means of interaction for placing objects above a video footage

Public Display Systems (PDS) increasingly have a greater presence in our cities. These systems provide information and advertising specifically tailored to audiences in spaces such as airports, train stations, and shopping centers. A large number of public displays are also being deployed for entertainment reasons. Sometimes designing and prototyping PDS come to be a laborious, complex and a costly task. This dissertation focuses on the design and evaluation of PDS at early development phases with the aim of facilitating low-effort, rapid design and the evaluation of interactive PDS. This study focuses on the IPED Toolkit. This tool proposes the design, prototype, and evaluation of public display systems, replicating real-world scenes in the lab. This research aims at identifying benefits and drawbacks on the use of different means to place overlays/virtual displays above a panoramic video footage, recorded at real-world locations. The means of interaction studied in this work are on the one hand the keyboard and mouse, and on the other hand the tablet with two different techniques of use. To carry out this study, an android application has been developed whose function is to allow users to interact with the IPED Toolkit using the tablet. Additionally, the toolkit has been modified and adapted to tablets by using different web technologies. Finally the users study makes a comparison about the different means of interaction.

Uncertain Spaces: Virtual Configurations in Contemporary Art and Museums

Contém artigos apresentados na International Conference “Uncertain Spaces: Virtual Configurations in Contemporary Art and Museums”, na Fundação Calouste Gulbenkian (Lisboa), 31 Outubro - 1 de Novembro de 2014) de: Helena Barranha e Susana S. Martins - Introduction: Art, Museums and Uncertainty (pp.1-12); Alexandra Bounia e Eleni Myrivili - Beyond the ‘Virtual’: Intangible Museographies and Collaborative Museum Experiences (pp.15-32); Annet Dekker - Curating in Progress. Moving Between Objects and Processes (pp.33-54); Giselle Beiguelman - Corrupted Memories. The aesthetics of Digital Ruins and the Museum of the Unfinished (pp.55-82); Andrew Vaas Brooks - The Planetary Datalinks (pp.85-110); Sören Meschede - Curators’ Network: Creating a Promotional Database for Contemporary Visual Arts (pp.11-130); Stefanie Kogler - Divergent Histories and Digital Archives of Latin American and Latino Art in the United States – Old Problems in New Digital Formats (pp.131-156); Luise Reitstätter e Florian Bettel - Right to the City! Right to the Museum!(pp.159-182); Roberto Terracciano - On Geo-poetic systems: virtual interventions inside and outside the museum space (pp.183-210); e, Catarina Carneiro de Sousa e Luís Eustáquio - Art Practice in Collaborative Virtual Environments (pp.211-240).

COINE Project : Cultural Objects in Networked Environments

La idea subjacent al Projecte de Recerca i Desenvolupament COINE és permetre a la gent contar les seves pròpies històries. COINE pretén proporcionar les eines necessàries per crear estructuradament, un entorn basat en el World Wide Web, que permeti compartir continguts. Els resultats del Projecte ajudaran al desenvolupament d'estàndards per a la implantació i la recuperació estructurades de recursos digitals en entorns en xarxa distribuïda. El Projecte de COINE s'inicià el març de 2002 i finalitzà l'agost de 2004. Avui en dia estem al WorkPackage 5 on estem construint el Sistema, el programari i les interfícies. COINE pretén cobrir la gamma més àmplia possible d'usuaris potencials, des d'organitzacions de patrimoni cultural i institucions de qualsevol mida (principalment biblioteques, arxius i museus) fins a individus de qualsevol edat sense habilitats en l'ús de les TIC, o a grups petits de ciutadans. Els usuaris no utilitzaran només COINE com a eina de cerca, sinó que contribuiran amb el seu propi contingut.

Usability of Virtual Museums and the Diffusion of Cultural Heritage

Les prioritats per als museus canvien. La missió de la nova museologia és convertir els museus en llocs per a gaudir i aprendre, cosa que fa que hagin de dur a terme una gestió financera molt semblant a la d'una empresa social que competeixi en el sector del lleure. Amb el pas del temps, els museus han d'establir i aplicar els criteris necessaris per a la supervivència, aplanant el terreny perquè altres institucions públiques siguin més obertes en els seus esforços per comunicar i difondre el seu patrimoni. Ja podem començar a parlar d'algunes conclusions comunament acceptades sobre el comportament dels visitants, que són necessàries per a planificar exposicions futures que vegin l'aprenentatge com un procés constructiu, les col·leccions com a objectes amb significat i les mateixes exposicions com a mitjans de comunicació que haurien de transformar la manera de pensar de l'espectador i que estan al servei del mateix missatge. Sembla que internet representa un mitjà efectiu per a assolir aquests objectius, ja que és capaç (a) d'adaptar-se als interessos i les característiques intel·lectuals d'un públic divers; (b) de redescobrir els significats dels objectes i adquirir un reconeixement sociocultural del seu valor per mitjà del seu potencial interactiu, i (c) de fer ús d'elements atractius i estimulants perquè tothom en gaudeixi. Per a aquest propòsit, és bàsic fer-nos les preguntes següents: quins criteris ha de seguir un museu virtual per a optimar la difusió del seu patrimoni?; quins elements estimulen els usuaris a quedar-se en una pàgina web i fer visites virtuals que els siguin satisfactòries?; quin paper té la usabilitat de l'aplicació en tot això?