Studies about the atomic capabilities concept for linear control systems in physical multi-agent environments

This paper shows the impact of the atomic capabilities concept to include control-oriented knowledge of linear control systems in the decisions making structure of physical agents. These agents operate in a real environment managing physical objects (e.g. their physical bodies) in coordinated tasks. This approach is presented using an introspective reasoning approach and control theory based on the specific tasks of passing a ball and executing the offside manoeuvre between physical agents in the robotic soccer testbed. Experimental results and conclusions are presented, emphasising the advantages of our approach that improve the multi-agent performance in cooperative systems

Predictive motion control of a mirosot mobile robot

This paper discusses predictive motion control of a MiRoSoT robot. The dynamic model of the robot is deduced by taking into account the whole process - robot, vision, control and transmission systems. Based on the obtained dynamic model, an integrated predictive control algorithm is proposed to position precisely with either stationary or moving obstacle avoidance. This objective is achieved automatically by introducing distant constraints into the open-loop optimization of control inputs. Simulation results demonstrate the feasibility of such control strategy for the deduced dynamic model

Driving assistance system applied in curves for real vehicles | Sistema de ayuda a la conducción en curvas para vehículos reales

Decreasing the accidents on highway and urban environments is the main motivation for the research and developing of driving assistance systems, also called ADAS (Advanced Driver Assistance Systems). In recent years, there are many applications of these systems in commercial vehicles: ABS systems, Cruise Control (CC), parking assistance and warning systems (including GPS), among others. However, the implementation of driving assistance systems on the steering wheel is more limited, because of their complexity and sensitivity. This paper is focused in the development, test and implementation of a driver assistance system for controlling the steering wheel in curve zones. This system is divided in two levels: an inner control loop which permits to execute the position and speed target, softening the action over the steering wheel, and a second control outer loop (controlling for fuzzy logic) that sends the reference to the inner loop according the environment and vehicle conditions. The tests have been done in different curves and speeds. The system has been proved in a commercial vehicle with satisfactory results.

Test and evaluation of the AMF, Inc. and Fairchild Industries experimental safety vehicles. Volume II. ESV program summary. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Structural interaction with control systems.

Cover title.

Synthesis of flight control systems subject to vehicle parameter variations.

Mode of access: Internet.

Air vehicle simulator : An application for a cable array robot

The development of autonomous air vehicles can be an expensive research pursuit. To alleviate some of the financial burden of this process, we have constructed a system consisting of four winches each attached to a central pod (the simulated air vehicle) via cables - a cable-array robot. The system is capable of precisely controlling the three dimensional position of the pod allowing effective testing of sensing and control strategies before experimentation on a free-flying vehicle. In this paper, we present a brief overview of the system and provide a practical control strategy for such a system. ©2005 IEEE.

A geometric approach to trajectory design for an autonomous underwater vehicle : surveying the bulbous bow of a ship

In this paper, we present a control strategy design technique for an autonomous underwater vehicle based on solutions to the motion planning problem derived from differential geometric methods. The motion planning problem is motivated by the practical application of surveying the hull of a ship for implications of harbor and port security. In recent years, engineers and researchers have been collaborating on automating ship hull inspections by employing autonomous vehicles. Despite the progresses made, human intervention is still necessary at this stage. To increase the functionality of these autonomous systems, we focus on developing model-based control strategies for the survey missions around challenging regions, such as the bulbous bow region of a ship. Recent advances in differential geometry have given rise to the field of geometric control theory. This has proven to be an effective framework for control strategy design for mechanical systems, and has recently been extended to applications for underwater vehicles. Advantages of geometric control theory include the exploitation of symmetries and nonlinearities inherent to the system. Here, we examine the posed inspection problem from a path planning viewpoint, applying recently developed techniques from the field of differential geometric control theory to design the control strategies that steer the vehicle along the prescribed path. Three potential scenarios for surveying a ship?s bulbous bow region are motivated for path planning applications. For each scenario, we compute the control strategy and implement it onto a test-bed vehicle. Experimental results are analyzed and compared with theoretical predictions.

Controlling buoyancy-driven profiling floats for applications in ocean observation

Establishing a persistent presence in the ocean with an autonomous underwater vehicle (AUV) capable of observing temporal variability of large-scale ocean processes requires a unique sensor platform. In this paper, we examine the utility of vehicles that can only control their depth in the water column for such extended deployments. We present a strategy that utilizes ocean model predictions to facilitate a basic level of autonomy and enables general control for these profiling floats. The proposed method is based on experimentally validated techniques for utilizing ocean current models to control autonomous gliders. With the appropriate vertical actuation, and utilizing spatio–temporal variations in water speed and direction, we show that general controllability results can be met. First, we apply an A* planner to a local controllability map generated from predictions of ocean currents. This computes a path between start and goal waypoints that has the highest likelihood of successful execution. A computed depth plan is generated with a model-predictive controller (MPC), and selects the depths for the vehicle so that ambient currents guide it toward the goal. Mission constraints are included to simulate and motivate a practical data collection mission. Results are presented in simulation for a mission off the coast of Los Angeles, CA, USA, that show encouraging results in the ability of a drifting vehicle to reach a desired location.

多水下机器人的队形控制方法研究

本文采用跟随领航者法研究多水下机器人(Unmanned Underwater Vehicles, UUVs)的队形控制，研究内容主要包括三个方面：设计基于运动学模型的多UUVs队形控制器；将该队形控制器结合机器人的动力学特性研究队形控制问题；研究领航者避碰算法以及多UUVs群体的队形变换策略。 跟随领航者法根本的问题是研究领航者与任意一个跟随者之间的协调问题，因此本文将复杂的多UUVs系统简化为若干组两个UUVs组成的基本队形模型。为了避免出现极坐标系下不可预见的奇异点，我们提出在UUV载体坐标系下建立运动学模型，实现与UUV动力学坐标系的统一。将该模型转化为误差动力学模型之后，经过输入输出反馈线性化，得出基于运动学模型的队形控制律。将该控制律应用到多UUV的队形控制问题中，则每个跟随者与领航者之间都具有协调，跟随者之间互相独立。 上述队形控制器中UUV具有无限快的速度跟踪能力，而实际上UUV不具备这样的能力，因此在队形控制器的设计过程中应结合UUV的动力学特性，使得对多UUVs队形控制问题的分析和设计更接近实际。本文以基本队形模型为研究对象，结合实际载体的动力学特性，研究队形控制器。 在未知的海洋环境中，当多UUVs系统检测到障碍物时，本文所采用的策略是：领航者采用基于模糊逻辑的避碰控制算法，顺利地通过障碍物区域；同时，领航者依据其艏部的避碰声纳信息，发出变换队形的指令。该策略使得领航者在引领跟随者顺利通过障碍物区域的同时，又不影响领航者与跟随者之间的协调。 在变换队形的过程中，存在着UUV之间发生碰撞的隐患，本文提出了就近原则：领航者左侧的UUV依然在左侧或中间，右侧的依然在右侧或中间。 本文分别利用了MATLAB仿真平台和多UUVs数字仿真平台，验证了以上各方法的有效性。由于多UUVs数字仿真平台中的控制参数、水动力系数、传感器参数均源自于实际的载体和历次湖试、海试的试验数据，UUV之间的通信信道是基于实际的水声通信模型，因此该平台上的仿真结果可以证明上述方法具有实际可行性。

Integració d’ una unitat inercial i d’ un giroscopi de fibra òptica en un robot submarí i desenvolupament d’ un sistema de posicionament dins una piscina

El Grup de Visió per Computador i Robòtica (VICOROB) del departament d'Electrònica, Informàtica i Automàtica de la Universitat de Girona investiga en el camp de la robòtica submarina. Al CIRS (Centre d’Investigació en Robòtica Submarina), laboratori que forma part del grup VICOROB, el robot submarí Ictineu és la principal eina utilitzada per a desenvolupar els projectes de recerca. Recentment, el CIRS ha adquirit un nou sistema de sensors d' orientació basat en una unitat inercial i un giroscopi de fibra òptica. Aquest projecte pretén realitzar un estudi d' aquests dispositius i integrar-los al robot Ictineu. D' altra banda, aprofitant les característiques d’aquests sensors giroscopics i les mesures d' un sonar ja integrat al robot, es vol desenvolupar un sistema de localització capaç de determinar la posició del robot en el pla horitzontal de la piscina en temps real

Eina de mobilitat pel sistema de la producció d’Ormetal

L’objectiu principal d’aquest projecte consisteix en realitzar l’estudi, l' anàlisi, el disseny, i el desenvolupament d’una aplicació que millori i faciliti la tasca d’un empleat que treballi fora de l’empresa. Es fa una anàlisi dels requeriments de l’aplicació, es fa el model d’anàlisi i tot seguit el model de disseny, i s’implementarà mitjançant les eines que utilitza la nostra empresa o les que millor s’adaptin a ella. S’analitza també el tipus i el volum d’informació que haurà de manejar. Durant el procés de cada una de les etapes de desenvolupament s’aniran realitzant les corresponents proves per, finalment, realitzar una posada en marxa sobre un empleat a mode de proves en un entorn real. Degut a la necessitat de mobilitat dels comercials s’utilitzen dispositius PDA (Personal Digital Assistant) per al desenvolupament de l’aplicació que els permetrà realitzar les seves tasques. En canvi, l’aplicació corporativa de gestió de l’empresa està situada en un servidor Windows, i per centralitzar i gestionar la informació de les PDA s’utilitzarà una aplicació sota el sistema Windows. L’aplicació s’haurà de confeccionar en funció de les dades que es vulgui que el comercial pugui consultar sobre un client, obra, ... Per millorar-ne la seva funcionalitat, es permetrà l’opció de multi-llenguatge. L’aplicació de la PDA tindrà a grans trets les següents funcionalitats: gestió de clients, gestió de contactes, consultar gestions comercials, consultar obres dels clients, consultar el planning i l’estat dels muntadors. Altres processos que haurà de permetre l’aplicació son: la configuració i instal·lació de l’aplicació en els dispositius PDA i la càrrega i el traspàs de les dades entre l’aplicació del PDA i l’aplicació corporativa de l’empresa

Programació del robot e-puck amb Microsoft Robotics Studio

Microsoft Robotics Studio (MRS) és un entorn per a crear aplicacions per a robots utilitzant una gran varietat de plataformes hardware. Conté un entorn de simulació en el que es pot modelar i simular el moviment del robot. Permet també programar el robot, i executar-lo en l’entorn simulat o bé en el real. MRS resol la comunicació entre els diferents processos asíncrons que solen estar presents en el software de control d’un robot: processos per atendre sensors, actuadors, sistemes de control, comunicacions amb l’exterior,... MRS es pot utilitzar per modelar nous robots utilitzant components que ja estiguin disponibles en les seves llibreries, o també permet crear component nous. Per tal de conèixer en detall aquesta eina, seria interessant utilitzar-la per programa els robots e-pucks, uns robots mòbils autònoms de petites dimensions que disposen de dos motors i un complet conjunt de sensors. El que es vol és simular-los, realitzar un programa de control, realitzar la interfície amb el robot i comprovar el funcionament amb el robot real

An approach to vision-based station keeping for an unmanned underwater vehicle

This paper presents an automatic vision-based system for UUV station keeping. The vehicle is equipped with a down-looking camera, which provides images of the sea-floor. The station keeping system is based on a feature-based motion detection algorithm, which exploits standard correlation and explicit textural analysis to solve the correspondence problem. A visual map of the area surveyed by the vehicle is constructed to increase the flexibility of the system, allowing the vehicle to position itself when it has lost the reference image. The testing platform is the URIS underwater vehicle. Experimental results demonstrating the behavior of the system on a real environment are presented

Perspectives of auto-correcting lens distortions in mosaic-based underwater navigation

When unmanned underwater vehicles (UUVs) perform missions near the ocean floor, optical sensors can be used to improve local navigation. Video mosaics allow to efficiently process the images acquired by the vehicle, and also to obtain position estimates. We discuss in this paper the role of lens distortions in this context, proving that degenerate mosaics have their origin not only in the selected motion model or in registration errors, but also in the cumulative effect of radial distortion residuals. Additionally, we present results on the accuracy of different feature-based approaches for self-correction of lens distortions that may guide the choice of appropriate techniques for correcting distortions