Teoria da mente, linguagem e competências sociais em crianças ao nível pré-escolar

A compreensão dos estados mentais dos outros – Teoria da Mente (TM) – é um processo crucial no desenvolvimento cognitivo e social. A relação entre a Teoria da Mente e a Linguagem tem sido alvo de vários estudos ao longo das últimas décadas (Happé, 1995; de Villiers & Villiers, 2000; Astington, 2001; Ruffman et al., 2002; Lohmann & Tomasello, 2003; Astington & Baird, 2005; Astington & Pelletier, 2005; Farrar et al, 2009). Neste estudo avaliaram-se 229 crianças entre os 3 e os 7 anos que frequentavam jardim-de-infância. Destas 229 crianças, foram constituídos dois grupos, um constituído por crianças com desenvolvimento típico (GN) e outra por crianças com Perturbações da Fala/ Linguagem (GPFL), sendo que neste último foi ainda criado um sub-grupo de crianças com Perturbações Desenvolvimentais da Linguagem (SGPDL). Foi aplicado um teste de avaliação da TM, constituído por três sub-testes (Compreensão de falsas crenças de primeira ordem, crenças e desejos e acesso ao conhecimento) e um teste de avaliação de linguagem (T.A.L.C.) Foi também pedido aos cuidadores o preenchimento de um Questionário de Avaliação das Competências Sociais (Rydell et al., 1997). Verificou-se a existência de uma associação positiva e significativa entre a idade e a TM. Por outro lado, observou-se a presença de uma associação negativa e significativa entre a idade de início de fala e a TM. De uma forma geral, verifica-se que a TM está associada de forma positiva e estatisticamente significativa com os scores da linguagem, sendo esta relação mais forte relativamente aos aspectos relativos às Intenções comunicativas e score total de Expressão e Compreensão da linguagem. Vimos também que as crianças do SGPDL apresentaram scores inferiores ao nível da TM relativamente ao GN. Encontramos diferenças estatisticamente significativas em relação ao tempo de duração da prova de TM entre o GN e o GPFL, tendo estes últimos necessitado de maior tempo de resposta. Relativamente à associação existente entre competências sociais e TM, verificamos que não se encontrou a existência de correlações estatisticamente significativas, excepto para o factor “Altruísmo”. Pensa-se que este aspecto estará relacionado com o facto das competências de TM avaliadas neste estudo não se encontrarem associadas às questões emocionais, as quais constituem um sub-tipo de TM do tipo afectivo, mas antes do sub-tipo cognitivo. Os indivíduos GN apresentaram valores para a “Orientação Pró-Social”, “Iniciação Social” e score Total das Competências Sociais significativamente superiores às crianças do GPFL.

Análise da competitividade e desenvolvimento dos destinos turísticos da grande Lisboa e Oeste

Dissertação apresentada ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Gestão das Organizações, Ramo de Gestão de Empresas Orientada por: Professora Doutora Paula Odete Fernandes Professor Doutor Rui da Assunção Esteves Pimenta

Transparencia en la adquisición de segundas lenguas con finalidades específicas.

Título del congreso : 'Una lengua, muchas culturas'

Formulation and delivery of the bacterial antagonist Bacillus subtilis for management of lentil vascular wilt caused by Fusarium oxysporum f. sp lentis

Different formulations of Bacillus subtilis were prepared using standard laboratory protocols. Bacillus subtilis survived in glucose and talc powders at 8.6 and 7.8 log(10) CFU/g, respectively, for 1 year of storage at room temperature compared with 3.5 log(10) CFU/g on a peat formulation. Glasshouse experiments using soil and seed treatments were conducted to test the efficacy of B. subtilis for protecting lentil against the wilt disease caused by Fusariumoxysporum f. sp. lentis. Seed treatments with formulations of B. subtilis on glucose, talc and peat significantly enhanced its biocontrol activity against Fusarium compared with a treatment in which spores were applied directly to seed. The formulations decreased disease severity by reducing colonization of plants by the pathogen, promoting their growth and increased the dry weight of lentil plants. Of these treatments the glucose and talc-based powder formulations were more effective than the peat formulation and the spore application without a carrier. It was shown that the B. subtilis spores applied with glucose were viable for longer than those applied with other carriers. Seed treatment with these formulated spores is an effective delivery system that can provide a conducive environment for B. subtilis to suppress vascular wilt disease on lentil and has the potential for utilization in commercial field application.

Troubleshooting med avseende på avsättningar på gummiduk, Bobergs tryckeri AB

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink. Deposits from image areas contain pigment and talc from the printingink. The dampening water has also been analyzed. The result shows some sort of problem with thehardness regulator for the clean water. The pH-level should be increased a few steps.

Geologia e geoquimica do complexo cambaizinho, sao gabriel - RS

Mapeamentos geológicos feitos pelo autor na região do Arroio Cambaizinho - são Gabriel/RS, resultaram na definição do Complexo Cambaizinho, representado pelas seqüências meta-sedimentar e máfica-ultramáfica, intimamente associadas ao longo de toda a extensão da associação supracrustal. A seqüência meta-se dimentar é constitu1da por gnaisses quartzo-feldspáticos dominan tes, anfibolitos bandados e quartzitos subordinados, derivados de sedimentos areno-pelítico-carbonatados estruturados, de forma ritmica em ambiente subaquoso. Niveis composicionais de ocorrência restrita contendo estaurolita, definem o grau metamórfico (médio) para esta região. Intercalações de serpentinitos, xistos magnesianos variados e anfibolitos a granulação fina, na forma de camadas e/ou lentes interestratificadas nos meta-sedimentos indicam suas derivações a partir de derrames e/ou intrusões , ígneas de pequena profundidade de composição básica-ultrabásica. Este juntamente com níveis de sedimentos qu1micos intercalados e corpos de gabros, constituem a seqüência máfica-ultramáfica. O complexo, representa o segmento norte de um cintu rão supracrustal polideformado de forma geométrica aproximadamente linear, com orientação NNE, que se extende desde a localidade de Passo do Ivo, situado mais a sul, até a região objeto deste trabalho. Quatro fases de deformação dúcteis foram das para a área, estando as duas primeiras (Dl e D2) identifica associadas xx aos eventos metamórficos regionais Ml e M2. O metamorfismo mais antigo (Ml), assinalado por paragêneses diagnósticas em metapelitos alcançou o fácies anfibolito (zona da estaurolita), estando representado em outras litologias pela ocorrência de olivina metamórfica em paragênese com tremolita e/ou talco (meta-serpentinitos) e hornblenda mais oligoclásio/andesina em meta-básicas. O M2, mais jovem, atingiu o fácies xistos verdes, cujas assembléias mineralógicas se associam à foliação S2, de distribuição ir regular ao longo do cinturão. As condições fisicas de Ml foram de média P/T, similares às do metamorfismo Dalradiano. Intrusões graniticas na forma de lâminas (corpos ta bulares) durante a segunda fase de deformação D2, datados pelo mé todo Rb/Sr em 661 :: 29 Ma e agrupados sob a denominação de Granatóides Sanga do Jobim, fornecem idades mínimas para o complexo. Os vários grupos composiciconais da seqüência máfic~ -ultramáfica, individualizados com base em critérios petrográf~ cos e conteúdo de elementos maiores correspondem a: serpentinitos e olivina-talco ultramafitos (cumulados komatilticos); xis tos magnesianos à talco e clorita e anfibólio xistos (komatiitos); clorita-hornblenda xistos (basaltos komatiiticos), litos e metagabros (basaltos e gabros tolelticos). anfibo Estes vários tipos litológicos foram originados através de diferentes graus de fusão parcial do manto como indicado pelo hiato composicional de MgO (11 à 17%) e os diferentes padrões de ETR existentes entre os anfibolitos/metagabros (toleitos) e os serpentinitos/xistos magnesianos (komatiltos).As variações composicionais no interior de cada grupo, foram controladas pelo fracionamento (acumulação ou extração) de olivina e pouco ortopiroxênio (serpentinitos e olivina-talco ultramafitos)clinopiroxênios (clorita e anfibólios xistos, clorita hornblenda xistos), clinopiroxênio e plagioclásio (anfibolitos e metagabros). As abundâncias e os padrões de ERTL (elementos terras raras leves) enriquecidos, juntamente com os baixos valores das razões A1203/Ti02 e CaO/Ti02 das amostras de xistos magnesiinos das camadas A e B sugerem derivações deste material a partir de baixas percentagens de fusão de um manto enriquecido em mentos incompatíveis. As anomalias negativas de Ce e Eu na ele maio ria das rochas da seqüência máfica-ultramáfica indicam que protólitos ígneossofreram alterações em ambiente submarino.

Controle da porosidade em fases vítreas formadas pela ação de fundentes em cerâmicas gresificadas

O presente trabalho teve como objetivo investigar os fenômenos que controlam a porosidade em corpos cerâmicos com fases vítreas, formadas pela ação de fundentes, e associá-los com sua microestrutura final. Foram selecionados os fundentes albita, feldspato alcalino, wollastonita e espodumênio, representativos daqueles comercializados no setor cerâmico, a partir de critérios como teor e tipo de álcali, e teor em SiO2 e Al2O3 na composição química. Estes fundentes foram formulados com cada uma das seguintes matérias-primas e combinações destas: quartzo, caulim e talco. As composições foram formuladas com o objetivo de obter-se uma gama de diferentes microestruturas, variando porosidade, e a presença de fases vítreas ou cristalinas. Os corpos cerâmicos foram obtidos em fornos elétricos, tipo mufla, variando-se a temperatura entre 1140 e 1260°C, conforme a formulação investigada. Foram determinadas as propriedades dos corpos cerâmicos, como porosidade aparente, absorção de água e retração linear. Os resultados obtidos foram associados com sua microestrutura e formulação. Para tanto, fez-se uso de microscopia eletrônica de varredura e difratometria de raios-X. Em especial, a porosidade foi avaliada quanto sua distribuição, morfologia e tamanho, e sua influência na definição da microestrutura final, e relação com propriedades dos corpos cerâmicos investigados. Os resultados obtidos indicaram que o comportamento dos fundentes em massas cerâmicas define decisivamente a formação da porosidade em função da composição química do fundente e da combinação desta com a dos outros constituintes da massa cerâmica. O espodumênio forma fase vítrea reagindo basicamente com o quartzo em baixas temperaturas, retendo a porosidade principalmente junto às trincas de contração do mesmo. A albita propicia na expansão da porosidade e interconexão da mesma. O feldspato alcalino forma um líquido de maior viscosidade mantendo a menor porosidade e de maneira mais isolada. A wollastonita reage de modo diferenciado dos demais no que diz respeito à sílica presente, reagindo melhor na presença do alumínio e do magnésio.

Análise microestrutural de misturas cerâmicas de grês porcelanato com adição de chamote de telhas cerâmicas

MELO, Maxymme Mendes de ; PINHEIRO, Andrea Santos ; NASCIMENTO, R. M. ; MARTINELLI, Antonio Eduardo ; DUTRA, Ricardo Peixoto Suassuna ; MELO, Marcus Antônio de Freitas . Análise microestrutural de misturas cerâmicas de grês Porcelanato com adição de chamote de telhas cerâmicas. Cerâmica (São Paulo. Impresso), v. 55, p. 356-364, 2009

Efeito da adição de carbonatos em formulação de massa para revestimento cerâmico utilizando matérias-primas do Piauí

Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels

Estudo de pré-formulação para dose fixa combinada dos tuberculostáticos rifampicina, isoniazida, pirazinamida e etambutol (4 em 1)

According to the global framework regarding new cases of tuberculosis, Brazil appears at the 18th place. Thus, the Ministry of Health has defined this disease as a priority in the governmental policies. As a consequence, studies concerning treatment and prevention have increased. Fixed-dose combination formulations (FDC) are recognized as beneficial and are recommended by WHO, but they present instability and loss on rifampicin bioavailability. The main purpose of this work was to carry out a pre-formulation study with the schedule 1 tuberculosis treatment drugs: rifampicin, isoniazid, pyrazinamide and ethambutol and pharmaceutical excipients (lactose, cellulose, magnesium stearate and talc), in order to develop an FDC product (150 mg of rifampicin + 75 mg of isoniazid + 400 mg of pyrazinamide + 250 mg of ethambutol). The studies consisted of the determination of particle size and distribution (Ferret s diameter) and shape through optical microscopy, as well as rheological and technological properties (bulk and tapped densities, Hausner Factor, Carr s Index, repose angle and flux rate) and interactions among drugs and drug excipient through thermal analysis (DSC, DTA, TG and your derivate). The results showed that, except isoniazid, the other drugs presented poor rheological properties, determined by the physical characteristics of the particles: small size and rod like particles shape for rifampicin; rectangular shape for pyrazinamide and ethambutol, beyond its low density. The 4 drug mixture also not presented flowability, particularly that one containing drug quantity indicated for the formulation of FDC products. In this mixture, isoniazid, that has the best flowability, was added in a lower concentration. The addition of microcrystalline cellulose, magnesium stearate and talc to the drug mixtures improved flowability properties. In DSC analysis probable interactions among drugs were found, supporting the hypothesis of ethambutol and pyrazinamide catalysis of the rifampicin-isoniazid reaction resulting in 3- formylrifamycin isonicotinyl hydrazone (HYD) as a degradation product. In the mixtures containing lactose Supertab® DSC curves evidenced incompatibility among drugs and excipient. In the DSC curves of mixtures containing cellulose MC101®, magnesium stearate and talc, no alterations were observed comparing to the drug profiles. The TG/DTG of the binary and ternary mixtures curves showed different thermogravimetrics profiles relating that observed to the drug isolated, with the thermal decomposition early supporting the evidences of incompatibilities showed in the DSC and DTA curves

Avaliação da argila atapulgita para potencial uso como excipiente farmacêutico em formas sólidas

Clays are natural materials that have great potential for use as excipients for solid dosage forms. Palygorskite is a type of clay that has hydrophilic properties as well as a large surface area, which could contribute to the dissolution of drugs. Thus, the present study aims to evaluate the use of palygorskite clay, from Piaui (Northeast region of Brazil), as a pharmaceutical excipient for solid dosage forms, using rifampicin and isoniazid as the model drugs. The former is a poorly soluble drug often associated with isoniazid for tuberculosis treatment. Palygorskite was characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and specific surface area (BET). The rheological and technological properties of palygorskite were determined and compared to those of talc, magnesium stearate and Aersosil 200. Mixtures between drugs and palygorskite were analyzed by differential scanning calorimetry (DSC), thermogravimetric analysis (TG) combined with thermal analysis (DTA) and Fourier Transform Infrared Spectroscopy (FT-IR), where the results were compared with those of the individual compounds. In addition, dissolution studies of solid dispersions and capsules containing the drugs, mixed with either palygorskite or a mixture of talc and magnesium stearate, were performed. The results showed that palygorskite has small particles with a high surface area. Its rheological characteristics were better than those of others commonly used glidants and lubricants. There was no interaction between palygorskite and the drugs (rifampicin and isoniazid). Among the dispersions studied, the mixture with palygorskite (5%) showed the highest drug dissolution when compared to other excipients. The dissolution of the rifampicin capsules containing palygosrkite was faster in higher concentrations. However, these differences were statistically different only in the first minutes of the dissolution experiment. The dissolution profile of isoniazid was also statistically different on the initial part of the experiment. The formulations prepared with isoniazid and palygorskite showed higher drug dissolution, but it was in descending order of concentration. According to these results, the palygorskite clay used in this study has great potential for application as an excipient for solid dosage forms

Emprego de redes neurais artificiais supervisionadas e não supervisionadas no estudo de parâmetros reológicos de excipientes farmacêuticos sólidos

In this paper artificial neural network (ANN) based on supervised and unsupervised algorithms were investigated for use in the study of rheological parameters of solid pharmaceutical excipients, in order to develop computational tools for manufacturing solid dosage forms. Among four supervised neural networks investigated, the best learning performance was achieved by a feedfoward multilayer perceptron whose architectures was composed by eight neurons in the input layer, sixteen neurons in the hidden layer and one neuron in the output layer. Learning and predictive performance relative to repose angle was poor while to Carr index and Hausner ratio (CI and HR, respectively) showed very good fitting capacity and learning, therefore HR and CI were considered suitable descriptors for the next stage of development of supervised ANNs. Clustering capacity was evaluated for five unsupervised strategies. Network based on purely unsupervised competitive strategies, classic "Winner-Take-All", "Frequency-Sensitive Competitive Learning" and "Rival-Penalize Competitive Learning" (WTA, FSCL and RPCL, respectively) were able to perform clustering from database, however this classification was very poor, showing severe classification errors by grouping data with conflicting properties into the same cluster or even the same neuron. On the other hand it could not be established what was the criteria adopted by the neural network for those clustering. Self-Organizing Maps (SOM) and Neural Gas (NG) networks showed better clustering capacity. Both have recognized the two major groupings of data corresponding to lactose (LAC) and cellulose (CEL). However, SOM showed some errors in classify data from minority excipients, magnesium stearate (EMG) , talc (TLC) and attapulgite (ATP). NG network in turn performed a very consistent classification of data and solve the misclassification of SOM, being the most appropriate network for classifying data of the study. The use of NG network in pharmaceutical technology was still unpublished. NG therefore has great potential for use in the development of software for use in automated classification systems of pharmaceutical powders and as a new tool for mining and clustering data in drug development

Production of reinforced composites with natural fibers for industrial applications - Extrusion and injection WPC

The aim of this work is to study the replacement of currently used thermoplastics by composites reinforced with vegetable fibers with several advantages, mainly better mechanical properties, low weight and competitive cost compared to its counterparts. Extrusion and injection molding processes were studied using polypropylene (PP) matrix. The raw materials used were sugar cane bagasse, elephant grass, wood, milk cartons and recycled polypropylene. The composites were tested for bending, tension, hardness and impact resistance, following ASTM standards. The results obtained were extremely positive since they proved that natural fibers as reinforcement can be an important alternative to replace talc and other fillers.

The nest architecture of the ant, Pheidole oxyops Forel, 1908 (Hymenoptera : Formicidae)

Pheidole oxyops builds subterranean nests, with an external architecture that is distinctive and easily recognizable by its wide and specific entrance hole, measuring up to 12.2 cm in diameter, denoting a pitfall-trap. In order to study the nests'internal architecture, seven nests were excavated; four were identified with neutral talc, while the others were cast in cement and then excavated. Measurements were made in order to gain a better understanding of their structures, and a photographic documentation was obtained as well. The excavations revealed that the nests are perpendicular relative to the ground, beginning with a cylindrical channel with a mean length of 13.5 cm, containing irregular formations, and whose diameter becomes progressively narrower until the first chamber is formed. As the channel continues, dish-like chambers appear, interconnected by channels that become progressively narrower and longer, while the chambers are arranged at greater distances from each other as nest depth increases. Both channels and chambers are located on the vertical projection of the entrance hole. Nests may reach a depth of up to 5.09 m, with a number of chambers ranging between 4 and 14.

Caracterização de matérias-primas regionais e desenvolvimento de formulações de massas cerâmicas para porcelanato

Initially concentrated in some poles at the South and Southeast regions of Brazil, the ceramic tiles industry became wide during the 80 s decade, with a disconcentration industrial and regional pulverization. The competitiveness in the ceramic tiles internal and external consumers markets, it has debtor the industries to invest in sophisticated products each time more, either in design or the technology, but, mainly, in its final properties. Amongst the diverse types of ceramic coating, the porcelanato if has detached had to its process of technological production and excellent characteristics techniques. The Porcelanato is currently the material for coatings that presents the best technical and aesthetic features when compared with others ceramics found on the market. The chemical composition and the others raw materials characteristics have an importance that must to be ally to the inherent characteristics of fabrication process, essentially those related to the cycle of burning. This work had as purpose to develop formularizations of ceramic mass for production of porcelanato without glass coating, pertaining to the group BIa (text of absorption of water ≤ 0.5%) and with resistance superior mechanics 35MPa from raw materials characterized. The ceramic raw materials selected to the development of this study (A1 and A2 clays, feldspate, talc and quartz) were submitted to the following tests: X-ray fluorescence - chemical analysis determination; X-ray diffraction - Analysis of the stages mineralogics; Laser granulometry - size distribution of particles; and Differential thermal analysis - thermal behavior. Were performed tests of absorption of water, lineal retraction of it burns, apparent specific mass and rupture tension the flexing. The results had evidenced that the formularizations that had the A1 clay and talc on its composition were efficient for the porcelanato production remaining their technological characteristics inside of the intervals of variation desired by the Norms of the ABNT