AIM-Spice Integration of a Recursive Model for Threshold Voltage Shift in Thin Film Transistors

Non-crystalline semiconductor based thin film transistors are the building blocks of large area electronic systems. These devices experience a threshold voltage shift with time due to prolonged gate bias stress. In this paper we integrate a recursive model for threshold voltage shift with the open source BSIM4V4 model of AIM-Spice. This creates a tool for circuit simulation for TFTs. We demonstrate the integrity of the model using several test cases including display driver circuits.

Coupling effects of heterogeneity and stress fluctuation on rupture

The coupling of mesoscopic strength distribution and stress fluctuation on damage evolution and rupture are examined. The numerical simulations show that there is only weak stress fluctuation at the initial damage stage when the mean field approximation is in effect. As the damage fraction becomes larger than the threshold value, the fluctuation is amplified significantly, and damage localization appears. The coupling between stress fluctuation, disordered heterogeneity and the damage localization may play an essential role in catastrophic rupture. (C) 2003 Elsevier Ltd. All rights reserved.

Mixed-mode fracture mechanisms near the fatigue threshold of aisi-316 stainless-steel

Near threshold, mixed mode (I and II), fatigue crack growth occurs mainly by two mechanisms, coplanar (or shear) mode and branch (or tensile) mode. For a constant ratio of ΔK_I/ΔK_II the shear mode growth shows a self-arrest character and it would only start again when ΔK_I and ΔK_II are increased. Both shear crack growth and the early stages of tensile crack growth, are of a crystallographic nature; the fatigue crack proceeds along slip planes or grain boundaries. The appearance of the fracture surfaces suggest that the mechanism of crack extension is by developing slip band microcracks which join up to form a macrocrack. This process is thought to be assisted by the nature of the plastic deformation within the reversed plastic zone where high back stresses are set up by dislocation pile-ups against grain boundaries. The interaction of the crack tip stress field with that of the dislocation pile-ups leads to the formation of slip band microcracks and subsequent crack extension. The change from shear mode to tensile mode growth probably occurs when the maximum tensile stress and the microcrack density in the maximum tensile plane direction attain critical values.

Failure process analysis of cement under explosive loading with a generalized driven nonlinear threshold model

The microstructural heterogeneity and stress fluctuation play important roles in the failure process of brittle materials. In this paper, a generalized driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. As an illustration, the failure process of cement material under explosive loading is analyzed using the model. The result agrees well with the experimental one, which proves the efficiency of the model.

Overcoat dependence of laser-induced damage threshold of 355 nm HR coatings

A series of HR coatings, with and without overcoat, were prepared by electron beam evaporation using the same deposition process. The laser-induced damage threshold (LIDT) was measured by a 355 nm Nd:YAG laser with a pulse width of 8 ns. Damage morphologies of samples were observed by Leica-DMRXE Microscope. The stress was measured by viewing the substrate deformation before and after coatings deposition using an optical interferometer. Reflectance of the samples was measured by Lambda 900 Spectrometer. The theoretical results of electric field distributions of the samples were calculate by thin film design software (TFCalc). It was found that SiO2 overcoat had improved the LIDT greatly, while MgF2 overcoat had little effect on the LIDT because of its high stress in the HR coatings. The damage morphologies were different among HR coatings with and without overcoats. (c) 2005 Elsevier B.V. All rights reserved.

Preparation of high laser induced damage threshold antireflection film using interrupted ion assisted deposition

Single layers and antireflection films were deposited by electron beam evaporation, ion assisted deposition and interrupted ion assisted deposition, respectively. Antireflection film of quite high laser damage threshold (18J/cm(2)) deposited by interrupted ion assisted deposition were got. The electric field distribution, weak absorption, and residual stress of films and their relations to damage threshold were investigated. It was shown that the laser induced damage threshold of film was the result of competition of disadvantages and advantages, and interrupted ion assisted deposition was one of the valuable methods for preparing high laser induced damage threshold films. (c) 2007 Optical Society of America

Effects of annealing on laser-induced damage threshold of TiO2/SiO2 high reflectors

The mechanism of improving 1064 nm, 12 ns laser-induced damage threshold (LIDT) of TiO2/SiO2 high reflectors (HR) prepared by electronic beam evaporation from 5.1 to 13.1 J/cm(2) by thermal annealing is discussed. Through optical properties, structure and chemical composition analysis, it is found that the reduced atomic non-stoichiometric defects are the main reason of absorption decrease and LIDT rise after annealing. A remarkable increase of LIDT is found at 300 degrees C annealing. The refractive index and film inhomogeneity rise, physical thickness decrease, and film stress changes from compress stress to tensile stress due to the structure change during annealing. (c) 2007 Elsevier B.V. All rights reserved.

A thermalization energy analysis of the threshold voltage shift in amorphous indium gallium zinc oxide thin film transistors under simultaneous negative gate bias and illumination

It has been previously observed that thin film transistors (TFTs) utilizing an amorphous indium gallium zinc oxide (a-IGZO) semiconducting channel suffer from a threshold voltage shift when subjected to a negative gate bias and light illumination simultaneously. In this work, a thermalization energy analysis has been applied to previously published data on negative bias under illumination stress (NBIS) in a-IGZO TFTs. A barrier to defect conversion of 0.65-0.75 eV is extracted, which is consistent with reported energies of oxygen vacancy migration. The attempt-to-escape frequency is extracted to be 10 6-107 s-1, which suggests a weak localization of carriers in band tail states over a 20-40 nm distance. Models for the NBIS mechanism based on charge trapping are reviewed and a defect pool model is proposed in which two distinct distributions of defect states exist in the a-IGZO band gap: these are associated with states that are formed as neutrally charged and 2+ charged oxygen vacancies at the time of film formation. In this model, threshold voltage shift is not due to a defect creation process, but to a change in the energy distribution of states in the band gap upon defect migration as this allows a state formed as a neutrally charged vacancy to be converted into one formed as a 2+ charged vacancy and vice versa. Carrier localization close to the defect migration site is necessary for the conversion process to take place, and such defect migration sites are associated with conduction and valence band tail states. Under negative gate bias stressing, the conduction band tail is depleted of carriers, but the bias is insufficient to accumulate holes in the valence band tail states, and so no threshold voltage shift results. It is only under illumination that the quasi Fermi level for holes is sufficiently lowered to allow occupation of valence band tail states. The resulting charge localization then allows a negative threshold voltage shift, but only under conditions of simultaneous negative gate bias and illumination, as observed experimentally as the NBIS effect. © 2014 AIP Publishing LLC.

Les manifestations subtiles du stress dans le continuum de la psychose

RÉSUMÉ L’étiologie de la schizophrénie est complexe et le modèle de vulnérabilité-stress (Nuechterlein & Dawson, 1984) propose que des facteurs de vulnérabilité d’ordre génétique combinés à une histoire environnementale de stress particulier pousseraient l’individu vers un état clinique de psychose. L’objectif principal de cette thèse est de mieux comprendre la réaction physiologique des personnes schizophrènes face à un stress psychologique, tout en conceptualisant les symptômes psychotiques comme faisant partie d’un continuum, plutôt que de les restreindre sur un plan catégoriel. Afin de faire la différence entre les patients schizophrènes et les individus de la population générale, au-delà de la sévérité de leurs symptômes psychotiques, leur réaction au stress est comparée et le phénomène de seuil critique dans la réaction de cortisol est exploré en tant que point décisif pouvant distinguer entre les deux groupes. La première étude de cette thèse (Brenner et al., 2007) examine la fiabilité, la validité et la structure factorielle du Community Assessment of Psychic Experiences (CAPE) (Stefanis et al., 2002), avec un échantillon francophone et anglophone de la population nord américaine, un questionnaire auto-administré de 42 items qui évalue les expériences quasi-psychotiques présentes dans la population générale : des symptômes positifs (ou psychotiques), négatifs (ou végétatifs) et dépressifs. Ce questionnaire a été complété par un échantillon de 2 275 personnes de la population montréalaise. Les résultats appuient la consistance interne des 3 sous-échelles originales. De plus, l’analyse factorielle exploratoire suggère des solutions de 3-5 facteurs, où les solutions à 4 et 5 facteurs proposent de séparer les symptômes positifs en sous-catégories plus spécifiques. Finalement, cette étude suggère une version plus courte du CAPE, avec seulement 23 items, tout en préservant les mêmes trois échelles originales. La toile de fond de cet article confirme l’existence du phénomène du continuum de la psychose, où une variation de symptômes psychotiques peut se retrouver aussi bien dans la population générale que dans la population clinique. Dans une deuxième étude (Brenner et al., 2009), cette thèse examine à quel point la réponse de l’hormone de stress, le cortisol, à un test de stress psychosocial nommé le Trier Social Stress Test (TSST) (Kirschbaum, Pirke, & Hellhammer, 1993), peut établir une différence entre les sujets témoins et les patients schizophrènes, tout en contrôlant des variables importantes. Un groupe de 30 personnes schizophrènes et un groupe de 30 sujets de la population générale, recrutés lors de la première étude de cette thèse, ont participé à cette recherche qui est construite selon un plan expérimental. Le groupe témoin inclut des personnes légèrement symptomatiques et un chevauchement des scores psychotiques existe entre les deux groupes. Suite au stresseur, les deux groupes démontrent une augmentation significative de leur rythme cardiaque et de leur pression artérielle. Cependant, leur réponse de cortisol a tendance à différer : les patients schizophrènes présentent une réponse de cortisol plus petite que celle des témoins, mais en atteignant un seuil statistique significatif seulement à la mesure qui suit immédiatement le stresseur. Ces résultats significatifs sont obtenus en contrôlant pour la sévérité des symptômes positifs, un facteur discriminant significatif entre les deux groupes. Ainsi, le niveau de cortisol mesuré immédiatement après le stresseur se révèle être un marqueur de seuil critique pouvant établir une distinction entre les deux groupes. Aussi, leur réponse de cortisol maximale a tendance à apparaître plus tard que chez les sujets témoins. De façon générale, la réaction au stress des deux groupes étudiés est un autre moyen d’observer la continuité d’un comportement présent chez les individus, jusqu’à ce qu’un seuil critique soit atteint. Ainsi, il est possible de trancher, à un moment donné, entre psychose clinique ou absence de diagnostic.

Le blocage de la reconsolidation des souvenirs, une avenue possible pour le traitement du trouble de stress post-traumatique?

La présente thèse porte sur l’évaluation de l’efficacité d’un nouveau traitement pour le trouble de stress post-traumatique (TSPT). Le traitement a été développé selon les prémisses de la théorie de la reconsolidation des souvenirs. Il consiste en six courtes séances de remémoration de l’événement traumatique réalisées sous l’effet du propranolol, un bêtabloquant. La population de l’étude est constituée de patients souffrant d’un TSPT chronique. La thèse comporte cinq chapitres. Le premier chapitre est l’introduction, on y retrouve une description du TSPT, des traitements validés empiriquement, de diverses théories de la mémoire, d’un modèle étiologique du TSPT, d’études sur la consolidation et la reconsolidation, de la pharmacocinétique et du mécanisme d’action du propranolol,ainsi que des objectifs de la thèse. Le second chapitre est une revue critique de littérature sur la théorie de la reconsolidation. Comme l’étude du phénomène de la reconsolidation est récente, nous tentons de faire le point sur l’état des connaissances dans le domaine, dans un effort de réflexion sur la validité de la théorie. Nous proposons une série de critères permettant de différencier la reconsolidation d’autres processus connexes. Nous concluons que la théorie paraît valide, bien que d’autres études soient nécessaires afin de rendre compte de résultats négatifs publiés par le passé. Le troisième chapitre est un essai ouvert, et vise à évaluer l’efficacité d’un traitement basé sur la reconsolidation à diminuer la sévérité et l’incidence du TSPT, auprès de 42 patients souffrant d’un TSPT chronique. Le traitement consiste en six séances de remémoration de l’événement traumatique sous propranolol. Lors d’un suivi à trois mois, nous rapportons une diminution des symptômes de TSPT de 41%-56%, ainsi qu’une diminution de l’incidence du TSPT de 74%. En comparaison, seulement 2/25 patients du groupe contrôle (ayant participé uniquement aux évaluations) ne souffrent plus d’un TSPT. Dans le groupe traitement, les tailles d’effet (d de Cohen)varient entre 1.32-2.19. Le quatrième chapitre a comme objectif d’identifier des caractéristiques des patients prédisant l’efficacité du traitement, et d’explorer s’ils s’améliorent dans des domaines de santé autres que le TSPT. Nous rapportons que les femmes s’améliorent davantage que les hommes, mais que d’autres facteurs, tels que la sévérité des traits de personnalité borderline ou le type de trauma (enfance versus adulte), n’influent pas sur l’efficacité. Également, les patients s’améliorent dans les domaines de santé suivants : la qualité de vie, la symptomatologie dépressive, l’intensité des émotions négatives au rappel de l’événement traumatique et dans la vie courante. Le cinquième chapitre contient la discussion générale de la thèse. Nous effectuons une synthèse et interprétation des résultats, nous examinons les hypothèses alternatives à l’amélioration clinique et abordons des pistes de recherches futures. Nous concluons que le traitement à l’étude a été efficace dans notre échantillon de patients souffrant d’un TSPT chronique. Étant donné la méthodologie employée (essai ouvert), nous ne pouvons statuer sur le mécanisme d’action du traitement, à savoir si l’amélioration clinique a été réellement causée par un blocage de la reconsolidation des souvenirs.

Heat stress response for physiological traits in dairy and dual purpose cattle populations on phenotypic and genetic scales

The main objective of this thesis was to determine the potential impact of heat stress (HS) on physiological traits of lactating cows and semen quality of bulls kept in a temperate climate. The thesis is comprised of three studies. An innovative statistical modeling aspect common to all three studies was the application of random regression methodology (RRM) to study the phenotypic and genetic trajectory of traits in dependency of a continuous temperature humidity index (THI). In the first study, semen quality and quantity traits of 562 Holstein sires kept on an AI station in northwestern Germany were analyzed in the course of THI calculated from data obtained from the nearest weather station. Heat stress was identified based on a decline in semen quality and quantity parameters. The identified general HS threshold (THI = 60) and the thermoneutal zone (THI in the range from 50 to 60) for semen production were lower than detected in studies conducted in tropical and subtropical climates. Even though adult bulls were characterized by higher semen productivity compared to younger bulls, they responded with a stronger semen production loss during harsh environments. Heritabilities (low to moderate range) and additive genetic variances of semen characteristics varied with different levels of THI. Also, based on genetic correlations genotype, by environment interactions were detected. Taken together, these findings suggest the application of specific selection strategies for specific climate conditions. In the second study, the effect of the continuous environmental descriptor THI as measured inside the barns on rectal temperatures (RT), skin temperatures (ST), vaginal temperatures (VT), respiration rates (RR), and pulse rate (PR) of lactating Holstein Friesian (HF) and dual-purpose German black pied cattle (DSN) was analyzed. Increasing HS from THI 65 (threshold) to THI 86 (maximal THI) resulted in an increase of RT by 0.6 °C (DSN) and 1 °C (HF), ST by 3.5 °C (HF) and 8 °C (DSN), VT by 0.3 °C (DSN), and RR by 47 breaths / minute (DSN), and decreased PR by 7 beats / minute (DSN). The undesired effects of rising THI on physiological traits were most pronounced for cows with high levels of milk yield and milk constituents, cows in early days in milk and later parities, and during summer seasons in the year 2014. In the third study of this dissertation, the genetic components of the cow’s physiological responses to HS were investigated. Heat stress was deduced from indoor THI measurements, and physiological traits were recorded on native DSN cows and their genetically upgraded crosses with Holstein Friesian sires in two experimental herds from pasture-based production systems reflecting a harsh environment of the northern part of Germany. Although heritabilities were in a low range (from 0.018 to 0.072), alterations of heritabilities, repeatabilities, and genetic components in the course of THI justify the implementation of genetic evaluations including heat stress components. However, low repeatabilities indicate the necessity of using repeated records for measuring physiological traits in German cattle. Moderate EBV correlations between different trait combinations indicate the potential of selection for one trait to simultaneously improve the other physiological attributes. In conclusion, bulls of AI centers and lactating cows suffer from HS during more extreme weather conditions also in the temperate climate of Northern Germany. Monitoring physiological traits during warm and humid conditions could provide precious information for detection of appropriate times for implementation of cooling systems and changes in feeding and management strategies. Subsequently, the inclusion of these physiological traits with THI specific breeding values into overall breeding goals could contribute to improving cattle adaptability by selecting the optimal animal for extreme hot and humid conditions. Furthermore, the recording of meteorological data in close distance to the cow and visualizing the surface body temperature by infrared thermography techniques might be helpful for recognizing heat tolerance and adaptability in cattle.

Simulation of the impact of high temperature stress on annual crop yields

Brief periods of high temperature which occur near flowering can severely reduce the yield of annual crops such as wheat and groundnut. A parameterisation of this well-documented effect is presented for groundnut (i.e. peanut; Arachis hypogaeaL.). This parameterisation was combined with an existing crop model, allowing the impact of season-mean temperature, and of brief high-temperature episodes at various times near flowering, to be both independently and jointly examined. The extended crop model was tested with independent data from controlled environment experiments and field experiments. The impact of total crop duration was captured, with simulated duration being within 5% of observations for the range of season-mean temperatures used (20-28 degrees C). In simulations across nine differently timed high temperature events, eight of the absolute differences between observed and simulated yield were less than 10% of the control (no-stress) yield. The parameterisation of high temperature stress also allows the simulation of heat tolerance across different genotypes. Three parameter sets, representing tolerant, moderately sensitive and sensitive genotypes were developed and assessed. The new parameterisation can be used in climate change studies to estimate the impact of heat stress on yield. It can also be used to assess the potential for adaptation of cropping systems to increased temperature threshold exceedance via the choice of genotype characteristics. (c) 2005 Elsevier B.V. All rights reserved.

High temperature stress and spikelet fertility in rice (Oryza sativa L.)

In future climates, greater heat tolerance at anthesis will be required in rice. The effect of high temperature at anthesis on spikelet fertility was studied on IR64 (lowland indica) and Azucena (upland Japonica) at 29.6 degrees C (control), 33.7 degrees C, and 36.2 degrees C tissue temperatures. The objectives of the study were to: (i) determine the effect of temperature on flowering pattern; (ii) examine the effect of time of day of spikelet anthesis relative to a high temperature episode on spikelet fertility; and (iii) study the interactions between duration of exposure and temperature on spikelet fertility. Plants were grown at 30/24 degrees C day/night temperature in a greenhouse and transferred to growth cabinets for the temperature treatments. Individual spikelets were marked with paint to relate fertility to the time of exposure to different temperatures and durations. In both genotypes the pattern of flowering was similar, and peak anthesis occurred between 10.30 h and 11.30 h at 29.2 degrees C, and about 45 min earlier at 36.2 degrees C. In IR64, high temperature increased the number of spikelets reaching anthesis, whereas in Azucena numbers were reduced. In both genotypes :511 h exposure to >= 33.7 degrees C at anthesis caused sterility. In IR64, there was no interaction between temperature and duration of exposure, and spikelet fertility was reduced by about 7% per degrees C > 29.6 degrees C. In Azucena there was a significant interaction and spikelet fertility was reduced by 2.4% degrees Cd-1 above a threshold of 33 degrees C. Marking individual spikelets is an effective method to phenotype genotypes and lines for heat tolerance that removes any apparent tolerance due to temporal escape.

Stress field control of eruption dynamics at a rift volcano: Nyamuragira, D.R.Congo

Using the record of 30 flank eruptions over the last 110 years at Nyamuragira, we have tested the relationship between the eruption dynamics and the local stress field. There are two groups of eruptions based on their duration (< 80days >) that are also clustered in space and time. We find that the eruptions fed by dykes parallel to the East African Rift Valley have longer durations (and larger volumes) than those eruptions fed by dykes with other orientations. This is compatible with a model for compressible magma transported through an elastic-walled dyke in a differential stress field from an over-pressured reservoir (Woods et al., 2006). The observed pattern of eruptive fissures is consistent with a local stress field modified by a northwest-trending, right lateral slip fault that is part of the northern transfer zone of the Kivu Basin rift segment. We have also re-tested with new data the stochastic eruption models for Nyamuragira of Burt et al. (1994). The time-predictable, pressure-threshold model remains the best fit and is consistent with the typically observed declining rate of sulphur dioxide emission during the first few days of eruption with lava emission from a depressurising, closed, crustal reservoir. The 2.4-fold increase in long-term eruption rate that occurred after 1977 is confirmed in the new analysis. Since that change, the record has been dominated by short-duration eruptions fed by dykes perpendicular to the Rift. We suggest that the intrusion of a major dyke during the 1977 volcano-tectonic event at neighbouring Nyiragongo volcano inhibited subsequent dyke formation on the southern flanks of Nyamuragira and this may also have resulted in more dykes reaching the surface elsewhere. Thus that sudden change in output was a result of a changed stress field that forced more of the deep magma supply to the surface. Another volcano-tectonic event in 2002 may also have changed the magma output rate at Nyamuragira.

Susceptibility of faba bean (Vicia faba L.) to heat stress during floral development and anthesis

Experiments were conducted over two years to quantify the response of faba bean (Vicia faba L.) to heat stress. Potted winter faba bean plants (cv. Wizard) were exposed to temperature treatments (18/10; 22/14; 26/18; 30/22; 34/26°C day/night) for five days during floral development and anthesis. Developmental stages of all flowers were scored prior to stress, plants were grown in exclusion from insect pollinators to prevent pollen movement between flowers, and yield was harvested at an individual pod scale, enabling effects of heat stress to be investigated at a high resolution. Susceptibility to stress differed between floral stages, flowers were most affected during initial green-bud stages. Yield and pollen germination of flowers present before stress showed threshold relationships to stress, with lethal temperatures (t50) ~28°C and ~32°C, while whole plant yield showed a linear negative relationship to stress with high plasticity in yield allocation, such that yield lost at lower nodes was partially compensated at higher nodal positions. Faba bean has many beneficial attributes for sustainable modern cropping systems but these results suggest that yield will be limited by projected climate change, necessitating the development of heat tolerant cultivars, or improved resilience by other mechanisms such as earlier flowering times.