988 resultados para Setor de óleo e gás
Resumo:
In the past few years, the Brazilian oil and gas sector had a considered growth, gaining enough relevance at international level, and being extremely important for the Brazilian socioeconomic development. However, the sector is still limited due to technical deficiencies. This work aims to conduct a current study, comprehending the entire oil chain, since it is possible to mention the Brazilian market updates on this context. To support this study, the historical development of the Brazilian petroleum industry was presented and the main stages of the production process were exposed with an emphasis on exploration and production phases. The new technologies developed for deepwater extractions, such as the pre-salt regions, were also discussed and, in the end, the relation of this growing market with the opportunities of the Human Resources Program of n. 48 was highlighted. This program identifies the market's actual needs and it's scarce's areas with the purpose of building capacity and qualified workforces, since it is also aimed, in a national level, a self-sufficient human resources for the sector
Resumo:
In the past few years, the Brazilian oil and gas sector had a considered growth, gaining enough relevance at international level, and being extremely important for the Brazilian socioeconomic development. However, the sector is still limited due to technical deficiencies. This work aims to conduct a current study, comprehending the entire oil chain, since it is possible to mention the Brazilian market updates on this context. To support this study, the historical development of the Brazilian petroleum industry was presented and the main stages of the production process were exposed with an emphasis on exploration and production phases. The new technologies developed for deepwater extractions, such as the pre-salt regions, were also discussed and, in the end, the relation of this growing market with the opportunities of the Human Resources Program of n. 48 was highlighted. This program identifies the market's actual needs and it's scarce's areas with the purpose of building capacity and qualified workforces, since it is also aimed, in a national level, a self-sufficient human resources for the sector
Resumo:
Este artigo explora os elementos e o papel das técnicas envolvidos no gerenciamento bem-sucedido de projetos estratégicos aplicados ao setor de exploração e produção (E&P) de óleo e gás do Reino Unido. Primeiramente, é apresentada uma revisão de literatura das técnicas de gerenciamento de projetos estratégicos. Em seguida, são descritos e validados 50 elementos multidisciplinares envolvidos nesse tipo de gerenciamento, explorando-se até que ponto as técnicas consideram, em termos teóricos, tais elementos. Complementarmente, é apresentada uma pesquisa que identifica os elementos do sucesso envolvidos no gerenciamento de projetos estratégicos e verifica até que ponto as técnicas consideram tais elementos na prática. Finalmente, são propostos conjuntos de técnicas para o gerenciamento bem-sucedido de projetos estratégicos de E&P no Reino Unido. O artigo traz ainda algumas conclusões e futuras direções de pesquisa, com ênfase na extensão da metodologia proposta à realidade brasileira, já que os resultados são exclusivos do ambiente britânico.
Resumo:
A previsível escassez de petróleo aliada a uma consciência ecológica está levando pesquisadores a procurar novas fontes de energia e processos de combustão mais eficientes e menos poluentes. Entre os combustíveis menos poluentes está o gás natural, cujo consumo aumenta ano a ano. Os motores de combustão interna são transformadores de energia que têm baixa eficiência de conversão. Este trabalho avaliou um motor Diesel, bicombustível, movido a Diesel e gás natural. Nesse motor, a energia provém, basicamente, da combustão do gás natural. O Diesel tem a função de produzir o início da combustão do gás, que é o combustível principal. Assim, haverá uma substituição parcial de óleo Diesel por gás natural, aumentando o rendimento da combustão. Inicialmente, foi feito um ensaio-testemunha, somente com óleo Diesel e após foram feitos ensaios, com três repetições, para variadas proporções de óleo Diesel, gás natural e ângulos de avanço da injeção. O melhor desempenho foi obtido para 22% de óleo Diesel em relação ao máximo débito da bomba injetora e 13 L min-1 de gás natural com ângulo de avanço de injeção original (21º). Nesse caso, a potência média aumentou 14%, e o consumo específico (medido em valores monetários) diminuiu 46% em relação ao ensaio-testemunha.
Resumo:
O estudo do conteúdo de foraminíferos de 8 amostras de sedimentos superficiais coletados em manguezal do norte da Ilha do Cardoso, sul do Estado de São Paulo, no verão (período chuvoso) de 2001, ao longo de um transecto no sentido da Baía de Trapandé para o interior, revelou dois segmentos distintos: a) uma planície inferior lamosa, com menor tempo de exposição sub-aérea e maior diversidade específica, dominada por Ammotiumcassis, A.salsum, Arenoparrella mexicana e Trochamminainflata, com abundância expressiva de Caroniaexilis na parte mais baixa e de Miliammina fusca na parte mais alta; b) uma planície superior arenosa, com maior tempo de exposição sub-aérea e menor diversidade, dominada por M. fusca e com abundância expressiva de T. inflatana parte mais baixa. Os sedimentos investigados são colonizados por foraminíferos exclusivamente aglutinantes, representados por 21 espécies de 16 gêneros. Dados de abundância relativa, riqueza, diversidade e equitatividade das espécies ao longo do transecto são apresentados, bem como os valores de salinidade, pH, oxigênio dissolvido e temperatura, medidos a partir da água intersticial dos sedimentos no momento da coleta das amostras. São feitas comparações com um estudo anterior, similar, que focalizou amostras coletadas, nos mesmos pontos, no inverno (período seco) de 2002. Os resultados obtidos interessam às análises de sistemas estuarinos modernos e antigos, bem como a projetos envolvidos com o diagnóstico do estado de conservação de áreas litorâneas, sendo úteis ao Setor de Petróleo e Gás
Resumo:
O objetivo dessa dissertação é analisar o desafio da transferência de conhecimento no setor de tecnologia de Óleo e Gás, especificamente na empresa FMC Technologies do Brasil, e suas consequências no diferencial competitivo, ao compreender como se dá a transferência de conhecimento tácito dos especialistas para os novos colaboradores, que devido ao enorme crescimento do segmento são a maioria atualmente. O estudo de caso se dará pela observação participante do próprio autor no local de trabalho, abordagem de teoria analítica e consequente pesquisa qualitativa com colaboradores de diferentes áreas e tempos de serviço, a fim de qualificar observações, bem como entender como se estabelece este processo e fundamentalmente, como melhorá-lo e garantir sustentabilidade. Como resultado deste trabalho tivemos a validação dos especialistas como responsáveis pela transferência do conhecimento tácito dentro do ambiente e contexto capacitante criado desde a fundação da empresa CBV, o qual desdobra a estratégia através da inspiração na valorização do trabalho e sentimento de contribuição.
Resumo:
O presente trabalho de pesquisa, apresentado como dissertação para a conclusão do curso de Mestrado Executivo em Administração de Empresas, teve como objetivo estudar o processo de implantação de um sistema de gestão de integridade de ativos tangíveis na filial brasileira de uma empresa estrangeira com larga experiência no setor de produção de óleo e gás. Embora a empresa matriz esteja presente em inúmeros países, a filial local, chamada neste estudo de Íntegra, é a primeira, fora do país de origem que possui a operação de um campo de petróleo. A análise realizada não foi feita diretamente sobre o processo de implantação do sistema de gestão na prática, mas sim sobre as percepções sobre o tema e os assuntos que este envolve, focando em entender como as partes interessadas entendem a gestão de integridade. O método empregado para o desenvolvimento do trabalho foi o de estudo de caso e a problemática estudada foi a influência dos aspectos culturais e o processo de internacionalização da empresa na implantação dos processos necessários à gestão de integridade de ativos. A fim de reunir material para a elaboração do trabalho, foi realizada pesquisa de campo, onde através de entrevistas com funcionários e prestadores de serviço da Íntegra foram colhidos depoimentos que propiciaram o entendimento da forma como estes viam a condução da implantação de processos na empresa. A confrontação da teoria disponível no meio acadêmico com os dados coletados na pesquisa de campo indicou alguns desafios culturais a serem considerados na implantação do processo de gestão, como os ligados às visões de prazo e aos valores e práticas coletivistas. O trabalho propõe uma discussão especial sobre o papel da liderança para fazer frente a esses desafios.
Resumo:
The inclusion of local suppliers in production chains has considerable impact on its performance, but most notably in its main actors. The results of this process may be of different kinds and can be analyzed from economic or institutional approaches. This study aimed to verify the existence of different performances of Petrobras due to the inclusion of local suppliers in the oil and gas production chain in the state of Rio Grande do Norte, from the viewpoints of transaction costs and the Institutional Theory. In order to this, were made the characterization of the PROMINP, the description of its actions and results, the mapping of its institutional context of reference, and identification of results obtained by Petrobras in terms of transaction costs and legitimacy. The theoretical framework is based on authors dealing with industrial concentration, as like Marshall, Krugman, Porter and Schmitz, from the sociological perspective of neoinstitucional theory, as like DiMaggio and Powell and Scott and Meyer, and transaction costs, as like Williamson. This is a qualitative research, with data collection done by consulting secondary fonts and semi-structured interviews with nineteen actors of three groups, namely: actors involved in actions of the program, representatives of enterprises and representative of Petrobras. To analyze the content was used the Suchman s model (1995) for categories associated with strategies of legitimation and fourteen variables associated with the three variables assets specificity, bounded rationality and opportunism (Williamson, 1995, 1989) in the case of transaction costs. The results indicate that PROMINP has achieved its objectives by encouraging the increased participation of local companies in the oil and gas production chain, reflecting in the economic development of the state. The Redepetro/RN, fostered and built upon the interaction of the participants, is presented as a solution of continuity to the participation of enterprises in the chain, after the closure of the actions of the program. PROMINP demands responses to coercive, legislative and regulatory pressures of the organizational field, whose institutional context of reference is wide. From the point of view of legitimacy, through strategies to gain cognitive legitimacy and maintaining pragmatic legitimacy, Petrobras can manipulate the environment, ensuring the compliance of the constituents to their technical and institutional demands. Enterprises, in turn, respond to the demands through compliance with technical demands, mainly through the certification of processes, and cultural changes. There aren t clear gains related to the transaction costs, however, gains in legitimacy can be seen as a cumulative capital that can serve as a competitive differential that generates economic gains. In terms of theoretical findings, it was found that, due to its explanatory power for actions that are difficult to explain only in economic terms, Institutional Theory may be used as theoretical support concurrent with other theories. TCE model has limitations in explaining the program actions. In the case, it s emphasized that Petrobras doesn t seek only economic efficiency, but has in its mission the commitment to social development.
Resumo:
The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic
Resumo:
In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2
Resumo:
Natural gas, although basically composed by light hydrocarbons, also presents in its composition gaseous contaminants such as CO2 (carbon dioxide) and H2S (hydrogen sulfide). Hydrogen sulfide, which commonly occurs in oil and gas exploration and production activities, besides being among the gases that are responsible by the acid rain and greenhouse effect, can also cause serious harm to health, leading even to death, and damages to oil and natural gas pipelines. Therefore, the removal of hydrogen sulfide will significantly reduce operational costs and will result in oil with best quality to be sent to refinery, thereby resulting in economical, environmental, and social benefits. These factors highlight the need for the development and improvement of hydrogen sulfide sequestrating agents to be used in the oil industry. Nowadays there are several procedures for hydrogen sulfide removal from natural gas used by the petroleum industry. However, they produce derivatives of amines that are harmful to the distillation towers, form insoluble precipitates that cause pipe clogging and produce wastes of high environmental impact. Therefore, the obtaining of a stable system, in inorganic or organic reaction media, that is able to remove hydrogen sulfide without forming by-products that affect the quality and costs of natural gas processing, transport and distribution is of great importance. In this context, the evaluation of the kinetics of H2S removal is a valuable procedure for the treatment of natural gas and disposal of the byproducts generated by the process. This evaluation was made in an absorption column packed with Raschig ring, where natural gas with H2S passes through a stagnant solution, being the contaminant absorbed by it. The content of H2S in natural gas in column output was monitored by an H2S analyzer. The comparison between the obtained curves and the study of the involved reactions have not only allowed to determine the efficiency and mass transfer controlling step of the involved processes but also make possible to effect a more detailed kinetic study and evaluate the commercial potential of each reagent
Resumo:
The objective of this study was to produce biofuels (bio-oil and gas) from the thermal treatment of sewage sludge in rotating cylinder, aiming industrial applications. The biomass was characterized by immediate and instrumental analysis (elemental analysis, scanning electron microscopy - SEM, X-ray diffraction, infrared spectroscopy and ICP-OES). A kinetic study on non-stationary regime was done to calculate the activation energy by Thermal Gravimetric Analysis evaluating thermochemical and thermocatalytic process of sludge, the latter being in the presence of USY zeolite. As expected, the activation energy evaluated by the mathematical model "Model-free kinetics" applying techniques isoconversionais was lowest for the catalytic tests (57.9 to 108.9 kJ/mol in the range of biomass conversion of 40 to 80%). The pyrolytic plant at a laboratory scale reactor consists of a rotating cylinder whose length is 100 cm with capable of processing up to 1 kg biomass/h. In the process of pyrolysis thermochemical were studied following parameters: temperature of reaction (500 to 600 ° C), flow rate of carrier gas (50 to 200 mL/min), frequency of rotation of centrifugation for condensation of bio-oil (20 to 30 Hz) and flow of biomass (4 and 22 g/min). Products obtained during the process (pyrolytic liquid, coal and gas) were characterized by classical and instrumental analytical techniques. The maximum yield of liquid pyrolytic was approximately 10.5% obtained in the conditions of temperature of 500 °C, centrifugation speed of 20 Hz, an inert gas flow of 200 mL/min and feeding of biomass 22 g/min. The highest yield obtained for the gas phase was 23.3% for the temperature of 600 °C, flow rate of 200 mL/min inert, frequency of rotation of the column of vapor condensation 30 Hz and flow of biomass of 22 g/min. The non-oxygenated aliphatic hydrocarbons were found in greater proportion in the bio-oil (55%) followed by aliphatic oxygenated (27%). The bio-oil had the following characteristics: pH 6.81, density between 1.05 and 1.09 g/mL, viscosity between 2.5 and 3.1 cSt and highest heating value between 16.91 and 17.85 MJ/ kg. The main components in the gas phase were: H2, CO, CO2 and CH4. Hydrogen was the main constituent of the gas mixture, with a yield of about 46.2% for a temperature of 600 ° C. Among the hydrocarbons formed, methane was found in higher yield (16.6%) for the temperature 520 oC. The solid phase obtained showed a high ash content (70%) due to the abundant presence of metals in coal, in particular iron, which was also present in bio-oil with a rate of 0.068% in the test performed at a temperature of 500 oC.
Resumo:
Natural gas, although basically composed by light hydrocarbons, also presents contaminant gases in its composition, such as CO2 (carbon dioxide) and H2S (hydrogen sulfide). The H2S, which commonly occurs in oil and gas exploration and production activities, causes damages in oil and natural gas pipelines. Consequently, the removal of hydrogen sulfide gas will result in an important reduction in operating costs. Also, it is essential to consider the better quality of the oil to be processed in the refinery, thus resulting in benefits in economic, environmental and social areas. All this facts demonstrate the need for the development and improvement in hydrogen sulfide scavengers. Currently, the oil industry uses several processes for hydrogen sulfide removal from natural gas. However, these processes produce amine derivatives which can cause damage in distillation towers, can cause clogging of pipelines by formation of insoluble precipitates, and also produce residues with great environmental impact. Therefore, it is of great importance the obtaining of a stable system, in inorganic or organic reaction media, able to remove hydrogen sulfide without formation of by-products that can affect the quality and cost of natural gas processing, transport, and distribution steps. Seeking the study, evaluation and modeling of mass transfer and kinetics of hydrogen removal, in this study it was used an absorption column packed with Raschig rings, where the natural gas, with H2S as contaminant, passed through an aqueous solution of inorganic compounds as stagnant liquid, being this contaminant gas absorbed by the liquid phase. This absorption column was coupled with a H2S detection system, with interface with a computer. The data and the model equations were solved by the least squares method, modified by Levemberg-Marquardt. In this study, in addition to the water, it were used the following solutions: sodium hydroxide, potassium permanganate, ferric chloride, copper sulfate, zinc chloride, potassium chromate, and manganese sulfate, all at low concentrations (»10 ppm). These solutions were used looking for the evaluation of the interference between absorption physical and chemical parameters, or even to get a better mass transfer coefficient, as in mixing reactors and absorption columns operating in counterflow. In this context, the evaluation of H2S removal arises as a valuable procedure for the treatment of natural gas and destination of process by-products. The study of the obtained absorption curves makes possible to determine the mass transfer predominant stage in the involved processes, the mass transfer volumetric coefficients, and the equilibrium concentrations. It was also performed a kinetic study. The obtained results showed that the H2S removal kinetics is greater for NaOH. Considering that the study was performed at low concentrations of chemical reagents, it was possible to check the effect of secondary reactions in the other chemicals, especially in the case of KMnO4, which shows that your by-product, MnO2, acts in H2S absorption process. In addition, CuSO4 and FeCl3 also demonstrated to have good efficiency in H2S removal
Resumo:
Objective to establish a methodology for the oil spill monitoring on the sea surface, located at the Submerged Exploration Area of the Polo Region of Guamaré, in the State of Rio Grande do Norte, using orbital images of Synthetic Aperture Radar (SAR integrated with meteoceanographycs products. This methodology was applied in the following stages: (1) the creation of a base map of the Exploration Area; (2) the processing of NOAA/AVHRR and ERS-2 images for generation of meteoceanographycs products; (3) the processing of RADARSAT-1 images for monitoring of oil spills; (4) the integration of RADARSAT-1 images with NOAA/AVHRR and ERS-2 image products; and (5) the structuring of a data base. The Integration of RADARSAT-1 image of the Potiguar Basin of day 21.05.99 with the base map of the Exploration Area of the Polo Region of Guamaré for the identification of the probable sources of the oil spots, was used successfully in the detention of the probable spot of oil detected next to the exit to the submarine emissary in the Exploration Area of the Polo Region of Guamaré. To support the integration of RADARSAT-1 images with NOAA/AVHRR and ERS-2 image products, a methodology was developed for the classification of oil spills identified by RADARSAT-1 images. For this, the following algorithms of classification not supervised were tested: K-means, Fuzzy k-means and Isodata. These algorithms are part of the PCI Geomatics software, which was used for the filtering of RADARSAT-1 images. For validation of the results, the oil spills submitted to the unsupervised classification were compared to the results of the Semivariogram Textural Classifier (STC). The mentioned classifier was developed especially for oil spill classification purposes and requires PCI software for the whole processing of RADARSAT-1 images. After all, the results of the classifications were analyzed through Visual Analysis; Calculation of Proportionality of Largeness and Analysis Statistics. Amongst the three algorithms of classifications tested, it was noted that there were no significant alterations in relation to the spills classified with the STC, in all of the analyses taken into consideration. Therefore, considering all the procedures, it has been shown that the described methodology can be successfully applied using the unsupervised classifiers tested, resulting in a decrease of time in the identification and classification processing of oil spills, if compared with the utilization of the STC classifier
Resumo:
Pós-graduação em Geologia Regional - IGCE