Otimização automática de aplicações web usando templates client-side

O crescente poder computacional dos dispositivos móveis e a maior eficiência dos navegadores fomentam a construção de aplicações Web mais rápidas e fluídas, através da troca assíncrona de dados em vez de páginas HTML completas. A OutSystems Platform é um ambiente de desenvolvimento usado para a construção rápida e validada de aplicaçõesWeb, que integra numa só linguagem a construção de interfaces de utilizador, lógica da aplicação e modelo de dados. O modelo normal de interação cliente-servidor da plataforma é coerente com o ciclo completo de pedido-resposta, embora seja possível implementar, de forma explícita, aplicações assíncronas. Neste trabalho apresentamos um modelo de separação, baseado em análise estática sobre a definição de uma aplicação, entre os dados apresentados nas páginas geradas pela plataforma e o código correspondente à sua estrutura e apresentação. Esta abordagem permite a geração automática e transparente de interfaces de utilizador mais rápidas e fluídas, a partir do modelo de uma aplicação OutSystems. O modelo apresentado, em conjunto com a análise estática, permite identificar o subconjunto mínimo dos dados a serem transmitidos na rede para a execução de uma funcionalidade no servidor, e isolar a execução de código no cliente. Como resultado da utilização desta abordagem obtém-se uma diminuição muito significativa na transmissão de dados, e possivelmente uma redução na carga de processamento no servidor, dado que a geração das páginasWeb é delegada no cliente, e este se torna apto para executar código. Este modelo é definido sobre uma linguagem, inspirada na da plataforma OutSystems, a partir da qual é implementado um gerador de código. Neste contexto, uma linguagem de domínio específico cria uma camada de abstração entre a definição do modelo de uma aplicação e o respetivo código gerado, tornando transparente a criação de templates clientside e o código executado no cliente e no servidor.

Hotel industry: An answer to the emerging trends on the global demand side of tourism

This dissertation studies essentially how Millennials are changing the hotel industry, in the sense that new trends are emerging with this generation and hotels need to respond accordingly, in order to survive within their competitive industry. Emphasis is also given to Asian travellers, as the enlargement of these countries’ middle class populations is predicted, therefore making Asian travellers a valuable target for the hotel industry. To successfully target this segment, hoteliers need also to consider the cultural differences and aspirations that come together with the Asian travellers, and appropriately adapt their offer to them. I will then redirect this study to the city of Lisbon, the Portuguese capital, to analyse if Lisbon’s four and five-star hotel managers are aware of the new market trends, and to understand how they are changing their hotels in order to make them more attractive to Millennials and Asian travellers. Using a sample of 12 hotels (four and five-stars ratings), I have concluded that, although there is a notable undergoing process of adaptation to these guests, there is a long way ahead in order for Lisbon’s hotels to entirely please and retain millennial guests.

Control in distribution networks with demand side management

The way in which electricity networks operate is going through a period of significant change. Renewable generation technologies are having a growing presence and increasing penetrations of generation that are being connected at distribution level. Unfortunately, a renewable energy source is most of the time intermittent and needs to be forecasted. Current trends in Smart grids foresee the accommodation of a variety of distributed generation sources including intermittent renewable sources. It is also expected that smart grids will include demand management resources, widespread communications and control technologies required to use demand response are needed to help the maintenance in supply-demand balance in electricity systems. Consequently, smart household appliances with controllable loads will be likely a common presence in our homes. Thus, new control techniques are requested to manage the loads and achieve all the potential energy present in intermittent energy sources. This thesis is focused on the development of a demand side management control method in a distributed network, aiming the creation of greater flexibility in demand and better ease the integration of renewable technologies. In particular, this work presents a novel multi-agent model-based predictive control method to manage distributed energy systems from the demand side, in presence of limited energy sources with fluctuating output and with energy storage in house-hold or car batteries. Specifically, here is presented a solution for thermal comfort which manages a limited shared energy resource via a demand side management perspective, using an integrated approach which also involves a power price auction and an appliance loads allocation scheme. The control is applied individually to a set of Thermal Control Areas, demand units, where the objective is to minimize the energy usage and not exceed the limited and shared energy resource, while simultaneously indoor temperatures are maintained within a comfort frame. Thermal Control Areas are overall thermodynamically connected in the distributed environment and also coupled by energy related constraints. The energy split is performed based on a fixed sequential order established from a previous completed auction wherein the bids are made by each Thermal Control Area, acting as demand side management agents, based on the daily energy price. The developed solutions are explained with algorithms and are applied to different scenarios, being the results explanatory of the benefits of the proposed approaches.

Sensorimotor synchronization when walking side by side with a point light walker

[Excerpt] Synchronization of periodic movements like side-by-side walking [7] is frequently modeled by coupled oscillators [5] and the coupling strength is defined quantitatively [3]. In contrast, in most studies on sensorimotor synchronization (SMS), simple movements like finger taps are synchronized with simple stimuli like metronomes [4]. While the latter paradigm simplifies matters and allows for the assessment of the relative weights of sensory modalities through systematic variation of the stimuli [1], it might lack ecological validity. Conversely, using more complex movements and stimuli might complicate the specification of mechanisms underlying coupling. We merged the positive aspects of both approaches to study the contribution of auditory and visual information on synchronization during side-by-side walking. As stimuli, we used Point Light Walkers (PLWs) and auralized steps sound; both were constructed from previously captured walking individuals [2][6]. PLWs were retro-projected on a screen and matched according to gender, hip height, and velocity. The participant walked for 7.20m side by side with 1) a PLW, 2) steps sound, or 3) both displayed in temporal congruence. Instruction to participants was to synchronize with the available stimuli. [...]

Side effects of genome structural changes.

The first extensive catalog of structural human variation was recently released. It showed that large stretches of genomic DNA that vary considerably in copy number were extremely abundant. Thus it is conceivable that they play a major role in functional variation. Consistently, genomic insertions and deletions were shown to contribute to phenotypic differences by modifying not only the expression levels of genes within the aneuploid segments but also of normal copy-number neighboring genes. In this report, we review the possible mechanisms behind this latter effect.

The Global Side of the Investment-Savings Puzzle

In this paper we re-examine the long standing and puzzling correlation between national savings and investment in industrial countries. We apply an econometric methodology that allows us to separate idiosyncratic correlation at the country level from correlation at the global level. In a major break with the existing literature, we find no evidence of a long run relationship in the idiosyncratic components of savings and investment. We also find that the global components in savings and investments comove, indicating that they react to shocks of a global nature.

Increased clozapine plasma concentrations and side effects induced by smoking cessation in 2 CYP1A2 genotyped patients.

Clozapine, an atypical antipsychotic, depends mainly on cytochrome P4501A2 (CYP1A2) for its metabolic clearance. CYP1A2 is inducible by smoking, and lower plasma concentrations of clozapine are measured in smokers than in nonsmokers. Case reports have been published on the effects of discontinuing smoking in patients receiving clozapine, which might lead to elevated plasma concentrations and severe side effects. We present 2 cases on the consequences of smoking cessation in patients receiving this drug. In the first patient, smoking cessation resulted, within 2 weeks, in severe sedation and fatigue, with an approximately 3-fold increase of plasma clozapine concentrations. In the second patient, a very high plasma concentration of clozapine (3004 ng/mL) was measured 6 days following a 16-day stay in a general hospital, during which smoking was prohibited. In the latter patient, the replacement of omeprazole, a strong CYP1A2 inducer, by pantoprazole, a weaker CYP1A2 inducer, could have contributed, in addition to smoking cessation, to the observed strong increase of plasma clozapine concentrations. Genotyping of the 2 patients revealed that they were carriers of the AA genotype for the -164C>A polymorphism (CYP1A2*1F) in intron 1 of CYP1A2 gene, which has previously been shown to confer a high inducibility of CYP1A2 by smoking. Thus, at the initiation of clozapine treatment, smoking patients should be informed that, if they decide to stop smoking, they are encouraged to do so but must inform their prescriber beforehand. Also, because of the increased use of no-smoking policies in many hospitals, studies examining the consequences of such policies on the pharmacokinetics/pharmacodynamics of drugs metabolized by CYP1A2, taking into account different CYP1A2 genotypes, are needed.

The Export Base Model with a Supply-Side Stimulus to the Export Sector

Paper delivered at the Western Regional Science Association Annual Conference, Sedona, Arizona, February, 2010.

The Distributional Consequences of Supply-Side Reforms in General Equilibrium

This paper addresses the issue on whether tax reforms consisten with lower public debt-to-GDP in the long-run can lead to a more efficient and equitable economy. To this end we solve a heterogeneous agent model comprised of a government, a representative capitalist and representative skilled and unskilled workers, under both rational expectations and adaptive learning. Our main ndings are that (i) reductions in capital taxation, while bene cial at the aggregate level, lead to increased inequality mainly due to the substitutability of un- skilled labour and capital; (ii) a fall in taxation for skilled labour is Pareto improving, which is largely explained by its complementarity with the other factor inputs; (iii) all agents would prefer increasing the tax rate on capital to increasing the tax rate on skilled and un- skilled labour since it leads to relatively lower welfare losses; and (iv) heterogeneity in initial beliefs under adaptive learning quantitatively matters for welfare.

Regional Policy Spillovers: The National Impact of Demand-Side Policy in an Interregional Model of the UK Economy

UK regional policy has been advocated as a means of reducing regional disparities and stimulating national growth. However, there is limited understanding of the interregional and national effects of such a policy. This paper uses an interregional computable general equilibrium model to identify the national impact of a policy-induced regional demand shock under alternative labour market closures. Our simulation results suggest that regional policy operating solely on the demand side has significant national impacts. Furthermore, the effects on the non-target region are particularly sensitive to the treatment of the regional labour market.

"How I Do It"-Radical Right Colectomy with Side-to-Side Stapled Ileo-Colonic Anastomosis.

BACKGROUND AND OBJECTIVE: Standardization of surgical technique helps to reproduce excellent clinical outcomes, especially in teaching institutions. We aim to describe in detail our established approach for oncological right colectomy. TECHNIQUE: The right colon is mobilized in a five-step latero-inferior approach starting off with (1) the terminal ileum, visualizing the duodenum and the head of pancreas. (2) The ascending colon is dissected from the retroperitoneum, and takedown of the hepatic flexure is completed coming retrograde from the transverse colon (3). (4) Transection of the remaining retroperitoneal attachments completes exposure of the duodenum and mobilization of the right colon. (5) Ileocolic vessels are dissected out and divided close to their origin, and the mesocolon is divided. We then establish intestinal continuity by use of a side-to-side stapled technique. (1) The arms of a linear cutting stapler are inserted via transverse incisions at the anti-mesenteric sides of the terminal ileum and the transverse colon (tenia) and fired. (2) The enterotomy site is closed by removal of the specimen using a second transverse firing of the linear cutting stapler. An important final step is the (3) reinforcement of the anastomotic ends and the crossing of the staple lines; an omental patch and closure of the mesenteric window are optional. CONCLUSION: The suggested standardized five-step lateral-to-medial dissection of the right colon and the three-step side-to-side stapled technique for ileo-colonic anastomosis are easy to learn and to reproduce. Careful adherence to pivotal technical details will help to obtain an optimal oncological outcome and a consistently low leak rate around 2 %.

Ligand binding transmits conformational changes across the membrane-spanning region to the intracellular side of the 5-HT3 serotonin receptor.

Conformational changes of channel activation: Five enhanced green fluorescent protein (EGFP) molecules (green cylinders) were integrated into the intracellular part of the homopentameric ionotropic 5-HT3 receptor. This allowed the detection of extracellular binding of fluorescent ligands (?) to EGFP by FRET, and also enabled the quantification of agonist-induced conformational changes in the intracellular region of the receptor by homo-FRET between EGFPs. The approach opens novel ways for probing receptor activation and functional screening of therapeutic compounds.

Simulating the Impact of Sectorial Productivity Gains on Two Regional Economies: Key Sectors from a Supply Side Perspective

In this paper we simulate and analyse the economic impact that sectorial productivity gains have on two regional Spanish economies (Catalonia and Extremadura). In particular we study the quantitative effect that each sector’s productivity gain has on household welfare (real disposable income and equivalent variation), on the consumption price indices and factor relative prices, on real production (GDP) and on the government’s net income (net taxation revenues of social transfers to households). The analytical approach consists of a computable general equilibrium model, in which we assume perfect competition and cleared markets, including factor markets. All the parameters and exogenous variables of the model are calibrated by means of two social accounting matrices, one for each region under study. The results allow us to identify those sectors with the greatest impact on consumer welfare as the key sectors in the regional economies. Keywords: Productivity gains, key sectors, computable general equilibrium

Is the GraftConnector a valid alternative to running suture in end-to-side coronary arteries anastomoses?

BACKGROUND: An animal study was carried out to compare long-term patency rates of coronary anastomoses performed with the GraftConnector versus running suture technique. METHODS: 10 sheep, 45 to 55 kg, underwent off-pump coronary artery bypass grafting (right internal mammary artery to left anterior descending artery). In 5 animals, the anastomosis was performed with a GraftConnector and in 5 animals with 7-0 running suture. Intraoperative fluoroscopy and a fluoroscopic control at 6 months were performed. After 6 months, the animals were sacrificed and the anastomoses were examined histologically. RESULTS: All animals survived at 6 months with 100% anastomosis patency rates in both groups. In the GraftConnector group, the anastomosis diameter at 6 months fluoroscopy was 118% of native left anterior descending artery versus 97% of the control group. Luminal anastomotic width at histology was 1.7 +/- 0.2 mm in the device group versus 1.6 +/- 0.1 mm in the control group. Mean intimal hyperplasia thickness was 0.21 +/- 0.1 mm in the device group versus 0.01 mm in the control group. CONCLUSIONS: The GraftConnector provides a consistent and reproducible coronary artery anastomosis and reduces technical demand and manual dexterity in coronary operations. Long-term results demonstrate that off-pump coronary artery bypass grafting performed with the GraftConnector had the same patency rate and luminal width as those performed with running suture.