The thermal behavior of kaolinite intercalation complexes : a review

The kaolinite intercalation and its application in polymer-based functional composites have attracted great interest, both in industry and in academia fields, since they frequently exhibit remarkable improvements in materials properties compared with the virgin polymer or conventional micro and macro-composites. Also of significant interest regarding the kaolinite intercalation complex is its thermal behavior and decomposition. This is because heating treatment of intercalated kaolinite is necessary for its further application, especially in the field of plastic and rubber industry. Although intercalation of kaolinite is an old and ongoing research topic, there is a limited knowledge available on kaolinite intercalation with different reagents, the mechanism of intercalation complex formation as well as on thermal behavior and phase transition. This review attempts to summarize the most recent achievements in the thermal behavior study of kaolinite intercalation complexes obtained with the most common reagents including potassium acetate, formamide, dimethyl sulfoxide, hydrazine and urea. At the end of this paper, the further work on kaolinite intercalation complex was also proposed.

Species differences in the glutathione transferase GSTT1-1 activity towards the model substrates methyl chloride and dichloromethane in liver and kidney

Glutathione transferase (GST) GSTT1-1 is involved in the biotransformation of several chemicals widely used in industry, such as butadiene and dichloro methane DCM. The polymorphic hGSTT1-1 may well play a role in the development of kidney tumours after high and long-term occupational exposure against trichloroethylene. Although several studies have investigated the association of this polymorphism with malignant diseases little is known about its enzyme activity in potential extrahepatic target tissues. The known theta-specific substrates methyl chloride (MC) dichloromethane and 1,2-epoxy-3-(p-nitrophenoxy)propane (EPNP) were used to assay GSTT1-1 activity in liver and kidney of rats, mice, hamsters and humans differentiating the three phenotypes (non-conjugators, low conjugators, high conjugators) seen in humans. In addition GSTT1-1 activity towards MC and DCM was determined in human erythrocytes. No GSTT1-1 activity was found in any tissue of non-conjugators (NC). In all organs high conjugators (HC) showed twofold higher activity towards MC and DCM than low conjugators (LC). The activity in human samples towards EPNP was too close to the detection limit to differentiate between the three conjugator phenotypes. GSTT1-1 activity towards MC was two to seven-times higher in liver cytosol than in kidney cytosol. The relation for MC between species was identical in both organs: mouse > HC > rat > LC > hamster > NC. In rats, mice and hamsters GSTT1-1 activity in liver cytosol towards DCM was also two to seven-times higher than in the kidney cytosol. In humans this activity was twice as high in kidney cytosol than in liver cytosol. The relation between species was mouse > rat > HC > LC > hamster > NC for liver, but mouse > HC > LC/rat > hamster/NC for kidney cytosol. The importance to heed the specific environment at potential target sites in risk assessment is emphasized by these results.

Sex outside the city : sex work in rural and regional New South Wales

During the last decade 'prostitution' has been characterised as a 'social problem' throughout rural and regional New South Wales. As we show here, the urban-centric nature of popular and official discourses of prostitution have inadvertently allowed for the development of regulatory positions which have negatively impacted sex workers in rural and regional communities and lead to conflict among sectors of the rural sex industry and between the sex industry and community activists. In addition to examining the problematisation of sex work in rural New South Wales, this paper sets out to understand why rural sex work has historically lacked visibility in popular and scholarly discourses. We provide an overview of the distinctive organisational aspects of the sex industry in rural contexts. Evidence for our assertions is largely derived from primary interview data collected from sex industry workers based in rural New South Wales. The paper represents the first attempt in the research literature on prostitution to understand sex work as a rural phenomenon.

For sale - sex in the country: The benefits of sex work as an occupational choice in rural NSW Australia

Drawing upon sociology of work, feminist theory and past sex worker research, we present the first study to explore the sex work industry in rural Australia. Using qualitative data from interviews conducted December 2004 - February 2005 with 20 sex industry workers in New South Wales, we question existing assumptions and generalizations surrounding contemporary sex work to explore how industry workers perceive their career experiences. Specifically, we explore workers’ motivations for entering and continuing to be involved in the industry, the profession benefits and historical changes. In contrast to radical feminist theory’s equation of sex work with victimization, these narratives by rural sex workers portray experiences of sexual empowerment, economic advancement, job flexibility, achievement and examples of positive social interaction. In conclusion, our findings provide contrasting data to the sex politics surrounding “prostitution” put forth by radical feminists as we reaffirm the sex industry to be a legitimate career option in rural Australia and challenge the determinism used to labelled sex work as definitively degrading and deleterious to women.

Workplace stress and its impact analysis for strategic stress management in construction projects

Workplace stress has been an increasing concern in the construction industry. Workers are working longer hours and construction managers’ responsibilities are becoming more complex and complicated due to reduced resources and widespread stakeholder involvements. These additional pressures potentially trigger workplace stress and impact on project performance. The purpose of this study is to examine and advance understanding of stress and its impact relationships that support holistic and strategic stress management. 17 key stress sources are identified with their impact relationships on different stress types examined. Based on the research findings, this paper concludes with a Stressor-Stress-Performance relationships map.

Desafios da formação de sindicalistas na contemporaneidade

Esta dissertação busca refletir sobre as alterações na organização do trabalho na sociedade brasileira do final do século XX, determinadas por políticas de caráter neoliberal, que demandaram alterações também nas abordagens de resistência da classe trabalhadora. Com este intuito, é estudado o processo da assim chamada globalização que trouxe elementos novos para o capitalismo da virada do século: financeirização e liberalização mundial da economia. São analisados os impactos causados no movimento sindical, através do resgate de sua história e seus processos de construção de lideranças, especialmente diante das mudanças trazidas pela reestruturação produtiva na transição híbrida de um modelo essencialmente fordista para outro, flexível, o toyotismo. O estudo foca o exemplo da categoria bancária, utilizando como referencial o Sindicato dos Bancários do Rio de Janeiro. O objeto de estudo centrou-se nos desafios gerados pela conjuntura, notadamente na formação de uma geração de sindicalistas capaz de fazer frente a um capitalismo oxigenado por tal processo de globalização. A fim de entender os desafios da formação de sindicalistas na contemporaneidade, a abordagem empírica baseia-se em entrevistas com dez dirigentes da atual Diretoria Executiva da entidade mencionada, cujo primeiro mandato iniciou nos anos 1990. A orientação metodológica tomou por base a consulta e análise de dados documentais, provenientes majoritariamente do Sindicato dos Bancários do Rio de Janeiro; da Contraf/CUT (Confederação Nacional dos Trabalhadores do Ramo Financeiro da Central Única dos Trabalhadores); do Dieese (Departamento Intersindical de Estatísticas e Estudos Sócio Econômicos), além de literatura especializada referente aos temas afins.

Uma abordagem à incorporação de lenhinosulfonatos e materiais reciclados em misturas de SBR para produção sustentável de solas

Mestrado em Engenharia Química - Ramo Otimização Energética na Indústria Química

Office of the City Clerk, St. Catharines Records, 1928-1974, n.d.

The site of present-day St. Catharines was settled by 3000 United Empire Loyalists at the end of the 18th century. From 1790, the settlement (then known as "The Twelve") grew as an agricultural community. St. Catharines was once referred to Shipman's Corners after Paul Shipman, owner of a tavern that was an important stagecoach transfer point. In 1815, leading businessman William Hamilton Merritt abandoned his wharf at Queenston and set up another at Shipman's Corners. He became involved in the construction and operation of several lumber and gristmills along Twelve Mile Creek. Shipman's Corners soon became the principal milling site of the eastern Niagara Peninsula. At about the same time, Merritt began to develop the salt springs that were discovered along the river which subsequently gave the village a reputation as a health resort. By this time St. Catharines was the official name of the village; the origin of the name remains obscure, but is thought to be named after Catharine Askin Robertson Hamilton, wife of the Hon. Robert Hamilton, a prominent businessman. Merritt devised a canal scheme from Lake Erie to Lake Ontario that would provide a more reliable water supply for the mills while at the same time function as a canal. He formed the Welland Canal Company, and construction took place from 1824 to 1829. The canal and the mills made St. Catharines the most important industrial centre in Niagara. By 1845, St. Catharines was incorporated as a town, with the town limits extending in 1854. Administrative and political functions were added to St. Catharines in 1862 when it became the county seat of Lincoln. In 1871, construction began on the third Welland Canal, which attracted additional population to the town. As a consequence of continual growth, the town limits were again extended. St. Catharines attained city status in 1876 with its larger population and area. Manufacturing became increasingly important in St. Catharines in the early 1900s with the abundance of hydro-electric power, and its location on important land and water routes. The large increase in population after the 1900s was mainly due to the continued industrialization and urbanization of the northern part of the city and the related expansion of business activity. The fourth Welland Canal was opened in 1932 as the third canal could no longer accommodate the larger ships. The post war years and the automobile brought great change to the urban form of St. Catharines. St. Catharines began to spread its boundaries in all directions with land being added five times during the 1950s. The Town of Merritton, Village of Port Dalhousie and Grantham Township were all incorporated as part of St. Catharines in 1961. In 1970 the Province of Ontario implemented a regional approach to deal with such issues as planning, pollution, transportation and services. As a result, Louth Township on the west side of the city was amalgamated, extending the city's boundary to Fifteen Mile Creek. With its current population of 131,989, St. Catharines has become the dominant centre of the Niagara region. Source: City of St. Catharines website http://www.stcatharines.ca/en/governin/HistoryOfTheCity.asp (January 27, 2011)

Caractérisation du risque associé au virus de l'hépatite E chez le porc

Dans cette étude, la bile d’un porc canadien naturellement infecté par une souche du virus de l’hépatite E (VHE) a été utilisée afin d’inoculer deux groupes de porcelets. Dans l’étude précoce (E), 4 porcelets âgés de 4 semaines et exempts de pathogènes spécifiques (SPF), ont été suivis jusqu’à 14 jours post-inoculation (pi). Dans l’étude tardive (L), 9 porcelets ont été suivis à chaque semaine jusqu’à l’abattage, soit 120 jours pi. À la nécropsie, la présence du VHE a été évaluée dans différents organes à 7, 14 et 120 jours pi. Des porcelets témoins (E=2 et L=3) ont été inoculés par de la bile exempte de VHE. Le virus a persisté chez certains animaux jusqu’à 84 à 105 jours pi dans le sérum malgré la présence d’anticorps IgG anti-VHE dans le sang, suggérant une virémie prolongée. L’excrétion virale dans les fèces s’est étalée également sur une période de 105 jours pi chez certains animaux. De plus, la détection de l’ARN viral dans les organes évalués s’est révélée presque nulle à l’âge d’abattage à l’exception de quelques vésicules biliaires, alors qu’on retrouvait l’ARN viral dans plusieurs organes à 7 et 14 jours pi. Pour évaluer la distribution du VHE chez les porcs commerciaux du Québec, un échantillonnage de porcs de trois abattoirs a été réalisé. Environ 100 échantillons de sang, fèces, foies et bile provenant des mêmes animaux en processus d’abattage ont été prélevés dans chacun des abattoirs, sur des porcs destinés à la consommation humaine. La détection de l’ARN viral et des anticorps du VHE a été réalisée à l’aide d’une RT-PCR nichée et d’un test ELISA adapté pour déceler les anticorps porcins anti-VHE. Chez les porcs d’abattoir, 12,9 % des échantillons de bile contenaient de l’ARN viral du VHE, alors que la détection virale était moindre dans les autres organes. Une séroprévalence en IgG de 26,0 % a été obtenue pour les sérums porcins analysés. Une analyse phylogénétique des différentes souches isolées pendant l’étude a démontré qu’elles sont du génotype 3. Ces données indiquent une exposition potentielle des travailleurs de l’industrie porcine au VHE porcin, notamment par les fèces, le sang et les organes et également pour les consommateurs par le biais des foies.

Résister à l'exploitation : une histoire de l'opposition péruvienne aux transnationales minières de 1901 à nos jours

Cette oeuvre est mise à disposition selon les termes de la licence Creative Commons Attribution - Pas d'utilisation commerciale - Pas de modification 2.5 Canada Vous avez donc le droit de : Partager - copier, distribuer et communiquer le matériel par tous les moyens et sous tous formats; Selon les conditions suivantes : Attribution — Vous devez créditer l'Oeuvre, intégrer un lien vers la licence et indiquer si des modifications ont été effectuées à l'Oeuvre. Vous devez indiquer ces informations par tous les moyens possibles mais vous ne pouvez pas suggérer que l'Offrant vous soutient ou soutient la façon dont vous avez utilisé son Oeuvre. Pas d’Utilisation Commerciale — Vous n'êtes pas autoriser à faire un usage commercial de cette Oeuvre, tout ou partie du matériel la composant. Pas de modifications — Dans le cas où vous effectuez un remix, que vous transformez, ou créez à partir du matériel composant l'Oeuvre originale, vous n'êtes pas autorisé à distribuer ou mettre à disposition l'Oeuvre modifiée. Pour voir une copie de cette licence, visitez http://creativecommons.org/licenses/by-nc-nd/2.5/ca/ ou écrivez à Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

L’impact différencié de la satisfaction envers les bonis individuels et les bonis collectifs sur l’intention de rester des travailleurs du secteur des technologies de l’information et des communications (TIC)

L’objectif de ce mémoire est d’étudier l’impact différencié de la satisfaction envers les bonis individuels et les bonis collectifs sur l’intention de rester (au sein d’une entreprise donnée) des travailleurs du secteur des technologies de l’information et des communications. Afin d’étudier cette question, trois hypothèses de recherche ont été émises à l’aide des théories suivantes : 1- la théorie de l’agence, 2- la théorie des attentes et 3- la théorie de l’échange social de Blau (1964). Selon la première hypothèse, la satisfaction envers les bonis individuels contribue à accroître l’intention de rester des travailleurs du secteur des TIC. La seconde hypothèse avance que la satisfaction envers les bonis collectifs contribue à accroître l’intention de rester des travailleurs du secteur des TIC. Enfin, la dernière hypothèse soutient que la satisfaction envers les bonis individuels a un impact plus important sur l’intention de rester des travailleurs du secteur des TIC que la satisfaction envers les bonis collectifs. Les données utilisées pour valider nos hypothèses ont été recueillies dans le cadre d'une enquête portant sur « les relations entre la rémunération, la formation et le développement des compétences avec l’attraction et la rétention des employés clés ». Ces données de nature longitudinale, proviennent d'une entreprise canadienne du secteur des TIC. La population étudiée regroupe les nouveaux employés embauchés entre le 1er avril 2009 et le 30 septembre 2010. Nos résultats confirment l’Hypothèse 1 voulant que la satisfaction envers les bonis individuels contribue à accroître l’intention de rester des travailleurs du secteur des TIC. À l’inverse, ces résultats infirment l’Hypothèse 2. La satisfaction envers les bonis collectifs n’a donc pas d’impact significatif sur l’intention de rester. Malgré un problème de colinéarité, nos résultats suggèrent de confirmer l’Hypothèse 3 voulant que la satisfaction envers les bonis individuels ait un impact plus important sur l’intention de rester des travailleurs du secteur des TIC que la satisfaction envers les bonis collectifs. Les résultats indiquent également que le niveau de scolarité et l’engagement organisationnel ont un impact positif sur l’intention de rester des travailleurs. Les analyses longitudinales révèlent que les différences entre les caractéristiques des travailleurs expliquent davantage l’intention de rester, que les différences à travers les temps chez un même travailleur.

Studies on new processing aids and other compounding ingredients in special purpose rubbers

In the first part of the study we probed the effectiveness of rice bran oil as a multipurpose compounding ingredient for nitrile (NBR) and chloroprene (CR) rubbers. This oil has already been successfully employed in the compounding of NR and SBR in this laboratory.In this context we thought it worthwhile to try this oil in the polar rubbers viz, NBR and CR also. The principle of like dissolves like as applicable to solvents is equally applicable while selecting a plasticiser, elastomer combination. Because of the compatibility considerations polar plasticisers are preferred for polar rubbers like NBR and CR. Although plasticisation is a physical phenomenon and no chemical reaction is involved, the chemical structure of plasticisers determines how much physical attraction there is between the rubber and the plasticiser. In this context it is interesting to note that the various fatty acids present in rice bran oil have a long paraffinic chain, characteristic of waxes, with an acid group at the end of the molecule. The paraffinic end of the molecule contributes lubricating effects and limits compatibility whereas the acid end group contributes some polarity and is also chemically reactive. Because of absorption of acid group on the surface of pigments, these acids will have active pigment wetting characteristics also. These factors justifies the role of rice bran oil as a co-activator and lubricating agent for NBR and CR. In fact in our study we successfully replaced stearic acid as co-activator and aromatic oillDOP as processing aid for CR and NBR with rice bran oil.This part of the study has got special significance in the fact that rubber industry now heavily depends on petroleum industry for process oils. The conventional process oils like aromatic, naphthenic and paraffinic oils are increasingly becoming costlier, as its resources in nature are fast depleting. Moreover aromatic process oils are reported to be carcinogenic because of the presence of higher levels of polycyclic aromatic compounds in these oils.As a result of these factors, a great amount research is going on world over for newer processing aids which are cost effective, nontoxic and performanance wise at par with the conventional ones used in the rubber industry. Trials with vegetable oils in this direction is worth trying.Antioxidants are usually added to the rubber compound to minimise ageing effects from heat, light, oxygen etc. As rice bran oil contains significant amount of tocopherols and oryzanol which are natural antioxidants, we replaced a phenolic antioxidant like styrenated phenol (SP) from the compound recipe of both the rubbers with RBO and ascertained whether this oil could function in the role of antioxidant as well.Preparation and use of epoxidised rice bran oil as plasticiser has already been reported.The crude rice bran oil having an iodine value of 92 was epoxidised in this laboratory using peracetic acid in presence of sulphuric acid as catalyst. The epoxy content of the epoxidised oil was determined volumetrically by treating a known weight of the oil with excess HCI and back titrating the residual HCI with standard alkali solution. The epoxidised oil having an epoxy content of 3.4% was tried in the compounding of NBR and CR as processing aids. And results of these investigations are also included in this chapter. In the second part of the study we tried how RBO/ERBO could perform when used as a processing aid in place of aromatic oil in the compounding of black filled NRCR blends. Elastomers cannot have all the properties required for a particular applications, so it is common practice in rubber industry to blend two elastomers to have desired property for the resulting blend.In this RBO/ERBO was tried as a processing aid for plasticisation, dispersion of fillers, and vulcanisation of black filled NR-CR blends.Aromatic oil was used as a control. The results of our study indicate that these oils could function as a processing aid and when added together with carbon black function as a cure accelerator also.PVC is compatible with nitrile rubber in all proportions, provided NBR has an acrylonitrile content of 25 to 40%. Lower or higher ACN content in NBR makes it incompatible with PVC.PVC is usually blended with NBR at high temperatures. In order to reduce torque during mixing, additional amounts of plasticisers like DOP are added. The plasticiser should be compatible both with PVC and NBR so as to get a homogeneous blend. Epoxidised soyaben oil is reported to have been used in the compounding of PVC as it can perfonn both as an efficient plasticiser and heat stabilizer.At present DOP constitute the largest consumed plasticiser in the PVC compounding. The migration of this plasticiser from food packaging materials made of PVC poses great health hazards as this is harmful to human body. In such a scenario we also thought it worthwhile to see whether DOP could be replaced by rice bran oil in the compounding of NBR-PVC blends Different blends of NBR-PVC were prepared with RBO and were vulcanized using sulphur and conventional accelerators. The various physical and mechanical properties of the vulcanisates were evaluated and compared with those prepared with DOP as the control plasticiser. Epoxidised rice bran oil was also tried as plasticiser for the preparation of NBR-PVC blends. A comparison of the processability and cure characteristics of the different blends prepared with DOP and ERBO showed that ERBO based blends have better processability and lower cure time values. However the elastographic maximum torque values are higher for the DOP based blends. Almost all of the physical properties evaluated are found to be slightly better for the DOP based blends over the ERBO based ones. However a notable feature of the ERBO based blends is the better percentage retention of elongation at break values after ageing over the DOP based blends. The results of these studies using rice bran oil and its epoxidised variety indicated that they could be used as efficient plasticisers in place of DOP and justifies their role as novel, nontoxic, and cheap plasticisers for NBR-PVC blends.

Ethylene-Propylene-Diene Terpolymer/Hexafluoropropylene-Vinylidinefluoride Elastomeric Composites: Thermal, Mechanical and Microwave Properties

In the present study, an attempt has been made to prepare composites by incorporating expanded graphite fillers in insulating elastomer matrices and to study its DC electrical conductivity, dielectric properties and electromagnetic shielding characteristics, in addition to evaluating the mechanical properties. Recently, electronic devices and components have been rapidly developing and advancing. Thus, with increased usage of electronic devices, electromagnetic waves generated by electronic systems can potentially create serious problems such as malfunctions of medical apparatus and industry robots and can even cause harm to the human body. Therefore, in this work the applicable utility of the prepared composites as electromagnetic interference (EMI) shielding material are also investigated. The dissertation includes nine chapters

Sensibilidad del cuestionario anamnésico de síntomas de miembro superior y columna desarrollado por la unidad de investigación de ergonómica de postura y movimiento (EPM) desde la perspectiva de la fisioterapia en Colombia

El propósito de este estudio es evaluar la sensibilidad, especificidad y valores predictivos del Cuestionario Anamnésico de Síntomas de Miembro Superior y Columna (CASMSC) desarrollado por la Unidad de Investigación de Ergonomía de Postura y Movimiento (EPM). Se realizó un estudio descriptivo de tipo correlacional, mediante el análisis de datos secundarios de una base de datos con registros de trabajadores de la industria de alimentos (n=401) en el año 2013, a quienes se les había aplicado el CASMSC, así como una evaluación clínica fisioterapéutica enfocada en los mismos segmentos corporales; esta última utilizada como prueba de oro. Para analizar si existían diferencias estadísticas por edad, antigüedad y género se aplicó el análisis de varianza de una vía. La sensibilidad, especificidad y valores predictivos del CASMSC se informan con sus respectivos intervalos de confianza (95%). La prevalencia de umbral positivo para sospecha de Desorden Músculo Esquelético (DME) tanto de miembro superior como de columna se encontró muy por encima de la media nacional para el sector. La sensibilidad del CASMSC para miembro superior estuvo en el rango de un 80% a 94,57% y para columna cervical y lumbar fue de 36,4% y 43,4%, respectivamente. Para la región dorsal fue casi del doble de las otras dos regiones (85,7%). El CASMSC es recomendable en su apartado para miembro superior dado a su alto nivel de sensibilidad.

Exposición acumulada de polvo respirable como predictor de enfermedad respiratoria

En la minería de carbón se presenta exposición prolongada a polvo de carbón y a polvo de sílice en diferentes porcentajes, encontrándose una asociación con las alteraciones obstructivas, bronquitis crónica, Neumoconiosis de los trabajadores de carbón y Silicosis. Se han establecido varias formas de estimar el riesgo de desarrollar dichas enfermedades respiratorias no malignas secundarias a la exposición a estos polvos (carbón y sílice) en el ámbito ocupacional, siendo el cálculo de la exposición acumulada, la que ha demostrado mayor utilidad. Con el fin de establecer el riesgo de desarrollar alteraciones funcionales, a partir de la exposición acumulada de polvo respirable - y en los trabajadores de una empresa de minería a cielo abierto en Colombia, se estructuró este estudio de cohorte. Se contó con el registro de 566 trabajadores distribuidos en 29 Grupos de Exposición Similar (GES). El cálculo de la dosis acumulada se realizó considerando las medianas de exposición para cada GES y el tiempo de exposición de cada trabajador. Y posteriormente se estimó el riesgo empleando una regresión de poisson con varianza robusta. Los resultados más importantes del estudio muestran la exposición acumulada en niveles inferiores a los reportados en la literatura, sin embargo se encuentra un riesgo ligeramente elevado, IRR 1.000124 (IC95% 1 - 1.000248) en los expuestos, estimando que por cada unidad de medición de la exposición acumulada que se incremente, el riesgo de que aparezca una alteración respiratoria funcional se incrementa en 1.000124 veces entre los trabajadores expuestos y los no expuestos.