不同玻璃组分对掺铒碲酸盐玻璃 光谱性质的影响

Series of tellurite glasses were prepared by traditional melting method, the glass composition were changed and the different effects of glass modifier oxides(alkali metals and alkaline earth metal oxides) and glass intermediate (Y2O3, GeO2, Nb2O5, WO3) on the optical and spectroscopic properties of Er³⁺ doped tellurite glass were researched and compared. The infrared transmitting spectra, absorption spectra and fluorescence spectra were tested, the results showed that Nb2O5 and WO3 in the glass act as part of the body's role in the formation of the network, caused the reduction of transmitting range in infrared wavelength, which decrease the transmitting properties of tellurite glass. The introduction of high valence cationic ions, WO3 especially, can increase the FWHM of Er³⁺ for the increased polarization effect. With the decreasing of cationic field of glass modifier ions, the ion filed of the environment around Er³⁺ increased, subsequently, the role of ligand field polarization effect reduced, which makes the luminescence lifetime increase, and on the contrary the FWHM decrease monotonously.

Superfluid nuclear matter in BCS theory and beyond

Medium polarization effects are studied for S-1(0) pairing in nuclear matter within BHF approach. The screening potential is calculated in the RPA limit, suitably renormalized to cure the low density mechanical instability of nuclear matter. The self-energy corrections are consistently included resulting in a strong depletion of the Fermi surface. The self-energy effects always lead to a quenching of the gap, whereas it is almost completely compensated by the anti-screening effect in nuclear matter.

Transmission characteristics of a vaginally-worn UHF radio telemeter

A vaginally-worn temperature telemeter may be used by women to chart their basal body temperature for ovulation detection. The telemeter uses a temperature to pulse width converter to key a Colpitts oscillator which is controlled in frequency by a 418 MHz SAW resonator. The circuit’s tank inductor acts as a compact, multi-turn loop antenna with a radiated power in isolation of around 1 uW. The transmission characteristics of the system are affected by the proximity of the human body, which acts as an electrically-large lossy dielectric. The RF link-budget must allow for the reduction in total emitted power, directional body-induced fading, and polarization effects. The polar power patterns of the telemeter were measured for both isolated and in-situ cases, using horizontal and vertical polarization. The power patterns were numerically integrated to determine relative emitted power, and a reference dipole used to determine the emitted power for the isolated device. In isolation the telemeter radiation is vertically polarized and isotropic in nature. With the telemeter in-situ, total body absorption was found to be over 20 dB, with directional fades of up to 40 dB; there was extensive cross-polarization, with up to 60% of radiated power horizontally polarized. With limited radiated power and directional fading, the operating range for the telemeter is limited to single room operation (less than 10m). The majority of RF radiation is absorbed by the body, but the radiation hazard is negligible due to the low power level of the device. The high level of cross-polarization suggests that either horizontal or vertically polarized base-station antennas may be used.

Energy levels, wavefunction compositions and electric dipole transitions in neutral Ca

A configuration-interaction approach, based on the use of B-spline basis sets combined with a model potential including monoelectronic and dielectronic core polarization effects, is employed to calculate term energies and wavefunctions for neutral Ca. Results are reported for singlet and triplet bound states, and some quasi-bound states above the lowest ionization limit, with angular momentum up to L = 4. Comparison with experiment and with other theoretical results shows that this method yields the most accurate energy values for neutral Ca obtained to date. Wavefunction compositions, necessary for labelling the levels, and the effects of semi-empirical polarization potentials on the wavefunctions are discussed, as are some recent identifications of doubly-excited states. It is shown that taking into account dielectronic core polarization changes the energies of the lowest terms in Ca significantly, in general by a few hundred cm(-1), the effect decreasing rapidly for the higher bound states. For Rydberg states with n approximate to 7 the accuracy of the results is often better than a few cm(-1). For series members (or perturbers) with a pronounced 3d character the error can reach 150 cm(-1). The wavefunctions are used to calculate oscillator strengths and lifetimes for a number of terms and these are compared with existing measurements. The agreement is good but points to a need for improved measurements.

Quantum chemistry studies on electronic properties of CN adsorbed on silver electrodes

The electronic properties of CN adsorbed on Ag electrodes at different potentials have been studied by using the method of self-consistent-charge discrete variational Xa (SCC-DV-Xa) cluster calculations. It is shown that the binding of NCAg is dominated by both electrostatic and polarization effects derived from the charge of CN, and that the transfer of s charge from CN to silver is the largest donation contribution. The electrode potential influences this charge transfer process and the interaction between CN adsorbate and silver electrode. The results of quantum chemistry calculations fit well with the experimental data of in situ spectroscopic studies on the CN/Ag electrode systems. © 1991.

Quantum criptography in optical fibers

As comunicações quânticas aplicam as leis fundamentais da física quântica para codificar, transmitir, guardar e processar informação. A mais importante e bem-sucedida aplicação é a distribuição de chaves quânticas (QKD). Os sistemas de QKD são suportados por tecnologias capazes de processar fotões únicos. Nesta tese analisamos a geração, transmissão e deteção de fotões únicos e entrelaçados em fibras óticas. É proposta uma fonte de fotões única baseada no processo clássico de mistura de quatro ondas (FWM) em fibras óticas num regime de baixas potências. Implementamos essa fonte no laboratório, e desenvolvemos um modelo teórico capaz de descrever corretamente o processo de geração de fotões únicos. O modelo teórico considera o papel das nãolinearidades da fibra e os efeitos da polarização na geração de fotões através do processo de FWM. Analisamos a estatística da fonte de fotões baseada no processo clássico de FWM em fibras óticas. Derivamos um modelo teórico capaz de descrever a estatística dessa fonte de fotões. Mostramos que a estatística da fonte de fotões evolui de térmica num regime de baixas potências óticas, para Poissoniana num regime de potências óticas moderadas. Validamos experimentalmente o modelo teórico, através do uso de fotodetetores de avalanche, do método estimativo da máxima verossimilhança e do algoritmo de maximização de expectativa. Estudamos o processo espontâneo de FWM como uma fonte condicional de fotões únicos. Analisamos a estatística dessa fonte em termos da função condicional de coerência de segunda ordem, considerando o espalhamento de Raman na geração de pares de fotões, e a perda durante a propagação de fotões numa fibra ótica padrão. Identificamos regimes apropriados onde a fonte é quase ideal. Fontes de pares de fotões implementadas em fibras óticas fornecem uma solução prática ao problema de acoplamento que surge quando os pares de fotões são gerados fora da fibra. Exploramos a geração de pares de fotões através do processo espontâneo de FWM no interior de guias de onda com suceptibilidade elétrica de terceira ordem. Descrevemos a geração de pares de fotões em meios com elevado coeficiente de absorção, e identificamos regimes ótimos para o rácio contagens coincidentes/acidentais (CAR) e para a desigualdade de Clauser, Horne, Shimony, and Holt (CHSH), para o qual o compromisso entre perda do guia de onda e não-linearidades maximiza esses parâmetros.

Review of bio-particle manipulation using dielectrophoresis

During the last decade, large and costly instruments are being replaced by system based on microfluidic devices. Microfluidic devices hold the promise of combining a small analytical laboratory onto a chip-sized substrate to identify, immobilize, separate, and purify cells, bio-molecules, toxins, and other chemical and biological materials. Compared to conventional instruments, microfluidic devices would perform these tasks faster with higher sensitivity and efficiency, and greater affordability. Dielectrophoresis is one of the enabling technologies for these devices. It exploits the differences in particle dielectric properties to allow manipulation and characterization of particles suspended in a fluidic medium. Particles can be trapped or moved between regions of high or low electric fields due to the polarization effects in non-uniform electric fields. By varying the applied electric field frequency, the magnitude and direction of the dielectrophoretic force on the particle can be controlled. Dielectrophoresis has been successfully demonstrated in the separation, transportation, trapping, and sorting of various biological particles.

Many-body effect in electrorheological responses

The many-body effect in the kinetic responses of ER fluids is studied by a molecular-dynamic simulation method. The mutual polarization effects of the particles are considered by self-consistently calculating the dipole strength on each particle according to the external field and the dipole field due to all the other particles in the fluids. The many-body effect is found to increase with the enhancement of the particle concentration and the permittivity ratio between the solvent and the particles. The calculated response times are shorter than that predicted with the 'point-dipole' model and agree very well with experimental results. The many-body effect enhances the shear stresses of the fluids by several times. But they are not proportional to the many-body correction factor lambda as expected. This is due to the fact that larger interaction forces between the particles lead to coarsening of the fibers formed in the suspensions. The results show that the many-body and multipolar interaction between the particles must be treated comprehensively in the simulations in order to get more reliable results.

Challenging the weak cosmic censorship conjecture with charged quantum particles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantum vacuum in hot nuclear matter: A non-perturbative treatment

We derive the equation of state for hot nuclear matter using the Walecka model in a non-perturbative formalism. We include here the vacuum polarization effects arising from the nucleon and scalar mesons through a realignment of the vacuum. A ground state structure with baryon-antibaryon condensates yields the results obtained through the relativistic Hartree approximation of summing baryonic tadpole diagrams. Generalization of such a state to include the quantum effects for the scalar meson fields through the σ -meson condensates amounts to summing over a class of multiloop diagrams. The techniques of the thermofield dynamics method are used for the finite-temperature and finite-density calculations. The in-medium nucleon and sigma meson masses are also calculated in a self-consistent manner. We examine the liquid-gas phase transition at low temperatures (≈ 20 MeV), as well as apply the formalism to high temperatures to examine a possible chiral symmetry restoration phase transition.

Planejamento de redes de comunicação sem fio para ambiente indoor considerando os efeitos da polarização das antenas: abordagem baseada em medições

Uma das principais aplicações de ondas eletromagnéticas, na atualidade, na área de telecomunicações trata dos enlaces em sistemas móveis sem fio. Sejam estes terrestres (indoor/outdoor) ou via satélites, o projetista do sistema de telecomunicações tem que ser capaz de determinar os sistemas irradiantes, as potências envolvidas, a frequência de operação do sistema, a área de cobertura e os parâmetros de qualidade do serviço. O planejamento das novas redes de comunicações sem fio representa um grande desafio ao incluir serviços cada vez mais avançados com diferentes requisitos de qualidade, suporte a mobilidade, altas taxas de transmissão e capacidades elevadas de tráfego. Os diversos ambientes nos quais essas redes operam, os fenômenos associados produzem diversos efeitos no comportamento do sinal recebido e, consequentemente, uma variação no desempenho do enlace de comunicação entre os pontos de acesso, a rede e os usuários. Por conseguinte, esses efeitos devem ser avaliados corretamente, de tal forma que o dimensionamento da rede atenda aos requisitos de qualidade regulamentados. O presente trabalho objetiva estabelecer uma metodologia para o planejamento de redes de comunicação sem fio para ambientes indoor, considerando os parâmetros de qualidade de serviços e os efeitos da polarização das antenas. Foi proposto um modelo empírico para determinar a área de cobertura desse ambiente a partir de uma abordagem baseada em medições. Como resultado de campanhas de medições, foram identificados os principais parâmetros que interferem nas perdas no enlace de propagação, destacando-se os materiais envolvidos no ambiente bem como os efeitos da polarização das antenas transmissora, entre outros. Tais efeitos, avaliados corretamente, permitirão ao projetista da rede, de uma forma crítica e com base em dados obtidos em campo, definir a melhor configuração de parâmetros e critérios de projeto para a implantação de uma rede móvel de acesso sem fio. As medições para determinação dos parâmetros de cobertura e de qualidade de serviços foram realizadas no prédio do Laboratório de Engenharia Elétrica e de Computação e no prédio de aulas do Instituto de Tecnologia da Universidade Federal do Pará. Nas campanhas de medição foram utilizadas algumas frequências, escolhidas devido à importância dos serviços disponibilizados: 2,4 GHz - redes locais sem fio (WLAN’s); 3,5 GHz - Wimax licenciado; 5,85 GHz - Wimax livre e 10 GHz (a faixa de 9,8 a 10 GHz não está ainda regulamentada, de 10 - 10,15 GHz-radioamador (Resolução Anatel, Nº 452/2006 - D.O.U. de 20.12.2006) ou serviços de comunicações multimídias (SCM) para sistemas em banda larga). Os principais resultados obtidos com o modelo proposto foram avaliados e comparados com os principais modelos da literatura e mostraram que a metodologia adotada para o planejamento de redes de comunicação sem fio em ambientes indoor teve um bom desempenho.

Optimized δ expansion for the Walecka model

The optimized δ-expansion is used to study vacuum polarization effects in the Walecka model. The optimized δ-expansion is a nonperturbative approach for field theoretic models which combines the techniques of perturbation theory and the variational principle. Vacuum effects on self-energies and the energy density of nuclear matter are studied up to script O sign(δ2). When exchange diagrams are neglected, the traditional relativistic Hartree approximation (RHA) results are exactly reproduced and, using the same set of parameters that saturate nuclear matter in the RHA, a new stable, tightly bound state at high density is found.

Antennas for the detection of radio emission pulses from cosmic-ray induced air showers at the Pierre Auger Observatory

The Pierre Auger Observatory is exploring the potential of the radio detection technique to study extensive air showers induced by ultra-high energy cosmic rays. The Auger Engineering Radio Array (AERA) addresses both technological and scientific aspects of the radio technique. A first phase of AERA has been operating since September 2010 with detector stations observing radio signals at frequencies between 30 and 80 MHz. In this paper we present comparative studies to identify and optimize the antenna design for the final configuration of AERA consisting of 160 individual radio detector stations. The transient nature of the air shower signal requires a detailed description of the antenna sensor. As the ultra-wideband reception of pulses is not widely discussed in antenna literature, we review the relevant antenna characteristics and enhance theoretical considerations towards the impulse response of antennas including polarization effects and multiple signal reflections. On the basis of the vector effective length we study the transient response characteristics of three candidate antennas in the time domain. Observing the variation of the continuous galactic background intensity we rank the antennas with respect to the noise level added to the galactic signal.

Structure and electronic properties of hydrated mesityl oxide: a sequential quantum mechanics/molecular mechanics approach

The hydration of mesityl oxide (MOx) was investigated through a sequential quantum mechanics/molecular mechanics approach. Emphasis was placed on the analysis of the role played by water in the MOx syn-anti equilibrium and the electronic absorption spectrum. Results for the structure of the MOx-water solution, free energy of solvation and polarization effects are also reported. Our main conclusion was that in gas-phase and in low-polarity solvents, the MOx exists dominantly in syn-form and in aqueous solution in anti-form. This conclusion was supported by Gibbs free energy calculations in gas phase and in-water by quantum mechanical calculations with polarizable continuum model and thermodynamic perturbation theory in Monte Carlo simulations using a polarized MOx model. The consideration of the in-water polarization of the MOx is very important to correctly describe the solute-solvent electrostatic interaction. Our best estimate for the shift of the pi-pi* transition energy of MOx, when it changes from gas-phase to water solvent, shows a red-shift of -2,520 +/- 90 cm(-1), which is only 110 cm(-1) (0.014 eV) below the experimental extrapolation of -2,410 +/- 90 cm(-1). This red-shift of around -2,500 cm(-1) can be divided in two distinct and opposite contributions. One contribution is related to the syn -> anti conformational change leading to a blue-shift of similar to 1,700 cm(-1). Other contribution is the solvent effect on the electronic structure of the MOx leading to a red-shift of around -4,200 cm(-1). Additionally, this red-shift caused by the solvent effect on the electronic structure can by composed by approximately 60 % due to the electrostatic bulk effect, 10 % due to the explicit inclusion of the hydrogen-bonded water molecules and 30 % due to the explicit inclusion of the nearest water molecules.

QCD-Strahlungskorrekturen zu Polarisationsobservablen in semileptonischen Zerfällen schwerer Quarks

In dieser Arbeit werden die QCD-Strahlungskorrekturen in erster Ordnung der starken Kopplungskonstanten für verschiedene Polarisationsobservablen zu semileptonischen Zerfällen eines bottom-Quarks in ein charm-Quark und ein Leptonpaar berechnet. Im ersten Teil wird der Zerfall eines unpolarisierten b-Quarks in ein polarisiertes c-Quark sowie ein geladenes Lepton und ein Antineutrino im Ruhesystem des b-Quarks analysiert. Es werden die Strahlungskorrekturen für den unpolarisierten und den polarisierten Beitrag zur differentiellen Zerfallsrate nach der Energie des c-Quarks berechnet, wobei das geladene Lepton als leicht angesehen und seine Masse daher vernachlässigt wird. Die inklusive differentielle Rate wird durch zwei Strukturfunktionen in analytischer Form dargestellt. Anschließend werden die Strukturfunktionen und die Polarisation des c-Quarks numerisch ausgewertet. Nach der Einführung der Helizitäts-Projektoren befaßt sich der zweite Teil mit dem kaskadenartigen Zerfall eines polarisierten b-Quarks in ein unpolarisiertes c-Quark und ein virtuelles W-Boson, welches weiter in ein Paar leichter Leptonen zerfällt. Es werden die inklusiven Strahlungskorrekturen zu drei unpolarisierten und fünf polarisierten Helizitäts-Strukturfunktionen in analytischer Form berechnet, welche die Winkelverteilung für die differentielle Zerfallsrate nach dem Viererimpulsquadrat des W-Bosons beschreiben. Die Strukturfunktionen enthalten die Informationen sowohl über die polare Winkelverteilung zwischen dem Spinvektor des b-Quarks und dem Impulsvektor des W-Bosons als auch über die räumliche Winkelverteilung zwischen den Impulsen des W-Bosons und des Leptonpaars. Der Impuls und der Spinvektor des b-Quarks sowie der Impuls des W-Bosons werden im b-Ruhesystem analysiert, während die Impulse des Leptonpaars im W-Ruhesystem ausgewertet werden. Zusätzlich zu den genannten Strukturfunktionen werden noch die unpolarisierte und die polarisierte skalare Strukturfunktion angegeben, die in Anwendungen bei hadronischen Zerfällen eine Rolle spielen. Anschließend folgt eine numerische Auswertung aller berechneten Strukturfunktionen. Im dritten Teil werden die nichtperturbativen HQET-Korrekturen zu inklusiven semileptonischen Zerfällen schwerer Hadronen diskutiert, welche ein b-Quark enthalten. Sie beschreiben hadronische Korrekturen, die durch die feste Bindung des b-Quarks in Hadronen hervorgerufen werden. Es werden insgesamt fünf unpolarisierte und neun polarisierte Helizitäts-Strukturfunktionen in analytischer Form angegeben, die auch eine endliche Masse und den Spin des geladenen Leptons berücksichtigen. Die Strukturfunktionen werden sowohl in differentieller Form in Abhängigkeit des quadrierten Viererimpulses des W-Bosons als auch in integrierter Form präsentiert. Zum Schluß werden die zuvor erhaltenen Resultate auf die semi-inklusiven hadronischen Zerfälle eines polarisierten Lambda_b-Baryons oder eines B-Mesons in ein D_s- oder ein D_s^*-Meson unter Berücksichtigung der D_s^*-Polarisation angewandt. Für die zugehörigen Winkelverteilungen werden die inklusiven QCD- und die nichtperturbativen HQET-Korrekturen zu den Helizitäts-Strukturfunktionen in analytischer Form angegeben und anschließend numerisch ausgewertet.