995 resultados para Plant names, Popular
Resumo:
Mode of access: Internet.
Resumo:
Mode of access: Internet.
Resumo:
Plant based dried food products are popular commodities in global market where much research is focused to improve the products and processing techniques. In this regard, numerical modelling is highly applicable and in this work, a coupled meshfree particle-based two-dimensional (2-D) model was developed to simulate micro-scale deformations of plant cells during drying. Smoothed Particle Hydrodynamics (SPH) was used to model the viscous cell protoplasm (cell fluid) by approximating it to an incompressible Newtonian fluid. The visco-elastic characteristic of the cell wall was approximated to a Neo-Hookean solid material augmented with a viscous term and modelled with a Discrete Element Method (DEM). Compared to a previous work [H. C. P. Karunasena, W. Senadeera, Y. T. Gu and R. J. Brown, Appl. Math. Model., 2014], this study proposes three model improvements: linearly decreasing positive cell turgor pressure during drying, cell wall contraction forces and cell wall drying. The improvements made the model more comparable with experimental findings on dried cell morphology and geometric properties such as cell area, diameter, perimeter, roundness, elongation and compactness. This single cell model could be used as a building block for advanced tissue models which are highly applicable for product and process optimizations in Food Engineering.
Resumo:
Background Small RNA sequencing is commonly used to identify novel miRNAs and to determine their expression levels in plants. There are several miRNA identification tools for animals such as miRDeep, miRDeep2 and miRDeep*. miRDeep-P was developed to identify plant miRNA using miRDeep’s probabilistic model of miRNA biogenesis, but it depends on several third party tools and lacks a user-friendly interface. The objective of our miRPlant program is to predict novel plant miRNA, while providing a user-friendly interface with improved accuracy of prediction. Result We have developed a user-friendly plant miRNA prediction tool called miRPlant. We show using 16 plant miRNA datasets from four different plant species that miRPlant has at least a 10% improvement in accuracy compared to miRDeep-P, which is the most popular plant miRNA prediction tool. Furthermore, miRPlant uses a Graphical User Interface for data input and output, and identified miRNA are shown with all RNAseq reads in a hairpin diagram. Conclusions We have developed miRPlant which extends miRDeep* to various plant species by adopting suitable strategies to identify hairpin excision regions and hairpin structure filtering for plants. miRPlant does not require any third party tools such as mapping or RNA secondary structure prediction tools. miRPlant is also the first plant miRNA prediction tool that dynamically plots miRNA hairpin structure with small reads for identified novel miRNAs. This feature will enable biologists to visualize novel pre-miRNA structure and the location of small RNA reads relative to the hairpin. Moreover, miRPlant can be easily used by biologists with limited bioinformatics skills.
Resumo:
AbstractObjectives Decision support tools (DSTs) for invasive species management have had limited success in producing convincing results and meeting users' expectations. The problems could be linked to the functional form of model which represents the dynamic relationship between the invasive species and crop yield loss in the DSTs. The objectives of this study were: a) to compile and review the models tested on field experiments and applied to DSTs; and b) to do an empirical evaluation of some popular models and alternatives. Design and methods This study surveyed the literature and documented strengths and weaknesses of the functional forms of yield loss models. Some widely used models (linear, relative yield and hyperbolic models) and two potentially useful models (the double-scaled and density-scaled models) were evaluated for a wide range of weed densities, maximum potential yield loss and maximum yield loss per weed. Results Popular functional forms include hyperbolic, sigmoid, linear, quadratic and inverse models. Many basic models were modified to account for the effect of important factors (weather, tillage and growth stage of crop at weed emergence) influencing weed–crop interaction and to improve prediction accuracy. This limited their applicability for use in DSTs as they became less generalized in nature and often were applicable to a much narrower range of conditions than would be encountered in the use of DSTs. These factors' effects could be better accounted by using other techniques. Among the model empirically assessed, the linear model is a very simple model which appears to work well at sparse weed densities, but it produces unrealistic behaviour at high densities. The relative-yield model exhibits expected behaviour at high densities and high levels of maximum yield loss per weed but probably underestimates yield loss at low to intermediate densities. The hyperbolic model demonstrated reasonable behaviour at lower weed densities, but produced biologically unreasonable behaviour at low rates of loss per weed and high yield loss at the maximum weed density. The density-scaled model is not sensitive to the yield loss at maximum weed density in terms of the number of weeds that will produce a certain proportion of that maximum yield loss. The double-scaled model appeared to produce more robust estimates of the impact of weeds under a wide range of conditions. Conclusions Previously tested functional forms exhibit problems for use in DSTs for crop yield loss modelling. Of the models evaluated, the double-scaled model exhibits desirable qualitative behaviour under most circumstances.
Resumo:
Petiveria alliacea L. pertence à família Phytolaccacceae e é conhecida popularmente como guiné ou amansa-senhor, entre outros nomes. Tem sido muito utilizada na medicina popular como agente terapêutico, devido à diversas propriedades farmacológicas. Estudos fitoquímicos têm contribuído para a descoberta de grande variedade de substâncias biologicamente ativas produzidas em diferentes partes da planta (saponinas, alcalóides, flavonóides, sulfetos, taninos, cumarinas, entre outros). A análise química da raiz tem revelado grande quantidade de derivados sulfurados, principalmente o dibenzil trissulfeto (DTS), com atividade antifúngica, antibacteriana, antioxidante e anticancerígena. Visando avaliar a produção biotecnológica do DTS, o presente trabalho teve como objetivo, otimizar a cultura de novas linhagens de calos, células em suspensão e embriões somáticos, a partir de plantas de P. alliacea L. mantidas in vitro, com o monitoramento da capacidade biossintética das culturas. Os resultados mostraram que a produção de calos friáveis foi possível em explantes foliares inoculados em meio MS suplementado com PIC ou 2,4-D. Além da resposta calogênica, foi observada a produção de estruturas globulares caracterizadas como embriões somáticos. A ocorrência de embriogênese somática direta foi confirmada através da análise histológica do processo regenerativo. A indução de embriões somáticos gerou um processo de embriogênese secundária altamente repetitivo até 150 dias de cultura e conversão a plantas em freqüência de 5%. Em relação à cultura de células em suspensão a partir dos calos friáveis, observou-se uma diminuição do crescimento celular ao longo das subculturas. As culturas em suspensão originadas de tecido embriogênico secundário continuaram o processo repetitivo em meio líquido e apresentaram conversão a plantas em taxas mais baixas que as obtidas em meio sólido. A obtenção de plantas completas a partir dos embriões somáticos demonstrou a possibilidade de utilização desse sistema para a micropropagação dessa espécie. O monitoramento fitoquímico dos sistemas de cultura in vitro e plantas de campo mantidas em casa de vegetação durante 02 anos apresentou diferenças significativas, confirmando que a cultura de tecidos pode alterar as rotas metabólicas. A cromatografia gasosa acoplada à espectrometria de massas realizada com extrato em diclorometano de embriões secos e hexânico de embriões frescos e raízes secas de plantas provenientes de embriões somáticos, demonstrou a presença do DTS, constituindo, portanto, sistemas in vitro importantes para a modulação desta substância.
Resumo:
The paper presents the description of one new order (Asplenietalia septentrionalo-cuneifolii) and two new alliances (Arenarion bertolonii and Physoplexido comosae- Saxifragion petraeae). In addition, the syntaxon Asplenietalia lanceolato-obovati is here formally raised to the order level and the name Hypno-Polypodietalia vulgaris is validated.
Resumo:
Extensive green roofs are becoming a popular tool for restoring green infrastructure in urban areas, particularly biodiverse habitats such as post-industrial/brownfield sites. This study investigated the use of six recycled lightweight aggregates and combinations of them in green roof growing substrate, to determine their effectiveness for enhancing plant abundance and species diversity. In two separate experiments, we examined the roles of substrate type and depth on the establishment of a perennial wildflower mix over a 15-month period. We found that some of the alternative substrates are comparable to the widely used crushed red brick aggregate (predominantly found in commercial green roof growing substrate) for supporting plant establishment. For some materials such as clay pellets, there was increased plant coverage and a higher number of plant species than in any other substrate. Substrates that were produced from a blend of two or three aggregate types also supported higher plant abundance and diversity. Generally, increasing substrate depth improved plant establishment, however this effect was not consistent across substrates. We conclude that recycled materials may be viable constituents of growing substrate for green roofs and they may improve green roof resilience, through increased plant cover and diversity. The results could provide evidence to support the construction of mosaic habitat types on single roofs using various substrate blends.
Resumo:
The article focuses on three results of the study: "(1)Communicate your results outside the research. Write articles in popular and industry magazines. Speak at producer meetings and develop websites that can be used to transfer research results into practice. (2) Choose places (e.g. farms or plants) that have managers who believe in your research, and be prepared to spend a lot of time with the first place that uses your findings. (3) to fail. (4) Do not allow your technology to get tied up in patent disputes."
Resumo:
Vegetables represent a main source of micro-nutrients which can improve the health status of malnourished poor in the world. Spinach (Spinacia oleracea L.) is a popular leafy vegetable in many countries which is rich with several important micro-nutrients. Thus, consuming Spinach helps to overcome micro-nutrient deficiencies. Pests and pathogens act as major yield constraints in food production. Root-knot nematodes, Meloidogyne species, constitute a large group of highly destructive plant pests. Spinach is found to be highly susceptible for these nematode attacks. Though agricultural production has largely benefited from modern technologies and innovations, some important dimensions which can minimize the yield losses have been neglected by most of the growers. Pre-plant or initial nematode density in soil is a crucial biotic factor which is directly responsible for crop losses. Hence, information on preplant nematode densities and the corresponding damage is of vital importance to develop successful control procedures to enhance crop production. In the present study, effect of seven initial densities of M. incognita, i.e., 156, 312, 625, 1250, 2,500, 5,000 and 10,000 infective juveniles (IJs)/plant (equivalent to 1000cm3 soil) on the growth and root infestation on potted spinach plants was determined in a screen house. In order to ensure a high accuracy, root infestation was ascertained by the number of galls formed, the percentage galled-length of feeder roots and galled-feeder roots, and egg production, per plant. Fifty days post-inoculation, shoot length and weight, and root length were suppressed at the lowest IJs density. However, the pathogenic effect was pronounced at the highest density at which 43%, 46% and 45% reduction in shoot length and weight, and root length, respectively, was recorded. The highest reduction in root weight (26%) was detected at the second highest density. The Number of galls and percentage galled-length of feeder roots/per plant showed significant progressive increase across the increasing IJs density with the highest mean value of 432.3 and 54%, respectively. The two shoot growth parameters and root length showed significant inverse relationship with the increasing gall formation. Moreover, the shoot and root length were shown to be mutually dependent on each other. Suppression of shoot growth of spinach greatly affects the grower’s economy. Hence, control measures are essentially needed to ensure a better production of spinach via reducing the pre-plant density below the level of 0.156 IJs/cm3.
Resumo:
Knowledge-elicitation is a common technique used to produce rules about the operation of a plant from the knowledge that is available from human expertise. Similarly, data-mining is becoming a popular technique to extract rules from the data available from the operation of a plant. In the work reported here knowledge was required to enable the supervisory control of an aluminium hot strip mill by the determination of mill set-points. A method was developed to fuse knowledge-elicitation and data-mining to incorporate the best aspects of each technique, whilst avoiding known problems. Utilisation of the knowledge was through an expert system, which determined schedules of set-points and provided information to human operators. The results show that the method proposed in this paper was effective in producing rules for the on-line control of a complex industrial process. (C) 2005 Elsevier Ltd. All rights reserved.
Resumo:
Acrylamide, a chemical that is probably carcinogenic in humans and has neurological and reproductive effects, forms from free asparagine and reducing sugars during high-temperature cooking and processing of common foods. Potato and cereal products are major contributors to dietary exposure to acrylamide and while the food industry reacted rapidly to the discovery of acrylamide in some of the most popular foods, the issue remains a difficult one for many sectors. Efforts to reduce acrylamide formation would be greatly facilitated by the development of crop varieties with lower concentrations of free asparagine and/or reducing sugars, and of best agronomic practice to ensure that concentrations are kept as low as possible. This review describes how acrylamide is formed, the factors affecting free asparagine and sugar concentrations in crop plants, and the sometimes complex relationship between precursor concentration and acrylamide-forming potential. It covers some of the strategies being used to reduce free asparagine and sugar concentrations through genetic modification and other genetic techniques, such as the identification of quantitative trait loci. The link between acrylamide formation, flavour, and colour is discussed, as well as the difficulty of balancing the unknown risk of exposure to acrylamide in the levels that are present in foods with the well-established health benefits of some of the foods concerned. Key words: Amino acids, asparagine, cereals, crop quality, food safety, Maillard reaction, potato, rye, sugars, wheat.
Resumo:
Apocynaceae sensun strictum from the Mucuge Municipal Park, Bahia, Brazil, including the valid publication of two names in Mandevilla Lindl. The flora of Rauvolfioideae and Apocynoideae, which together form Apocynaceae s.s., from the Mucuge Municipal Park, Chapada Diamantina, State of Bahia, Brazil, is presented. Eight species and five genera were recognized. Mandevilla is the most diverse genus, With four species: M. scabra (Hoffmans. ex Roem. & Schult.) K. Schum., M. tenuifolia (J.C. Mikan) Woodson, M. bahiensis (Woodson) M.F. Sales & Kinoshita-Gouvea, and M.microphylla (Stadelm.) M.F. Sales & Kinoshita-Gouvea, the last two are a new status and a new combination, respectively, whose names are being validly published here. The four remaining genera are each represented by one species: Couma rigida Mull. Arg., Stipecoma peltigera (Stadelm.) Mull Arg,, Temnadenia violacea (Veil.) Miers, and Himatanthus bracteatus (A. DC.) Woodson. Identification key, descriptions, comments and illustrations are presented for every species.
Resumo:
Current studies in South American Violaceae detected the necessity of neotypes for Viola calceolaria L. (equivalent to Hybanthus calceolaria (L.) Oken) and Viola oppositifolia L. (equivalent to Hvbanthus oppositifolius (L.) Taub.), names of species originally described in Loefling`s her Hispanicum, but without validly published names.
Resumo:
(Disposition of two names in Almeidea (Rutaceae)). Examination of type specimens at the P herbarium showed that Almeidea longifolia A. St.-Hil. (Rutaceae) is an illegitimate substitute name for A. affinis A. St.-Hil. The latter name is proposed here as a heterotypic synonym of A. rubra A. St.-Hil.