Ventral premammillary nucleus as a critical sensory relay to the maternal aggression network

Maternal aggression is under the control of a wide variety of factors that prime the females for aggression or trigger the aggressive event. Maternal attacks are triggered by the perception of sensory cues from the intruder, and here we have identified a site in the hypothalamus of lactating rats that is highly responsive to the male intruder—the ventral premammillary nucleus (PMv). The PMv is heavily targeted by the medial amygdalar nucleus, and we used lesion and immediate-early gene studies to test our working hypothesis that the PMv signals the presence of a male intruder and transfers this information to the network organizing maternal aggression. PMv-lesioned dams exhibit significantly reduced maternal aggression, without affecting maternal care. The Fos analysis revealed that PMv influences the activation of hypothalamic and septal sites shown to be mobilized during maternal aggression, including the medial preoptic nucleus (likely to represent an important locus to integrate priming stimuli critical for maternal aggression), the caudal two-thirds of the hypothalamic attack area (comprising the ventrolateral part of the ventromedial hypothalamic nucleus and the adjacent tuberal region of the lateral hypothalamic area, critical for the expression of maternal aggression), and the ventral part of the anterior bed nuclei of the stria terminalis (presently discussed as being involved in controlling neuroendocrine and autonomic responses accompanying maternal aggression). These findings reveal an important role for the PMv in detecting the male intruder and how this nucleus modulates the network controlling maternal aggression.

Controllo dell'atto di prensione: coinvolgimento dell'area V6A nell'orientamento del polso

Prehension in an act of coordinated reaching and grasping. The reaching component is concerned with bringing the hand to object to be grasped (transport phase); the grasping component refers to the shaping of the hand according to the object features (grasping phase) (Jeannerod, 1981). Reaching and grasping involve different muscles, proximal and distal muscles respectively, and are controlled by different parietofrontal circuit (Jeannerod et al., 1995): a medial circuit, involving area of superior parietal lobule and dorsal premotor area 6 (PMd) (dorsomedial visual stream), is mainly concerned with reaching; a lateral circuit, involving the inferior parietal lobule and ventral premotor area 6 (PMv) (dorsolateral visual stream), with grasping. Area V6A is located in the caudalmost part of the superior parietal lobule, so it belongs to the dorsomedial visual stream; it contains neurons sensitive to visual stimuli (Galletti et al. 1993, 1996, 1999) as well as cells sensitive to the direction of gaze (Galletti et al. 1995) and cells showing saccade-related activity (Nakamura et al. 1999; Kutz et al. 2003). Area V6A contains also arm-reaching neurons likely involved in the control of the direction of the arm during movements towards objects in the peripersonal space (Galletti et al. 1997; Fattori et al. 2001). The present results confirm this finding and demonstrate that during the reach-to-grasp the V6A neurons are also modulated by the orientation of the wrist. Experiments were approved by the Bioethical Committee of the University of Bologna and were performed in accordance with National laws on care and use of laboratory animals and with the European Communities Council Directive of 24th November 1986 (86/609/EEC), recently revised by the Council of Europe guidelines (Appendix A of Convention ETS 123). Experiments were performed in two awake Macaca fascicularis. Each monkey was trained to sit in a primate chair with the head restrained to perform reaching and grasping arm movements in complete darkness while gazing a small fixation point. The object to be grasped was a handle that could have different orientation. We recorded neural activity from 163 neurons of the anterior parietal sulcus; 116/163 (71%) neurons were modulated by the reach-to-grasp task during the execution of the forward movements toward the target (epoch MOV), 111/163 (68%) during the pulling of the handle (epoch HOLD) and 102/163 during the execution of backward movements (epoch M2) (t_test, p ≤ 0.05). About the 45% of the tested cells turned out to be sensitive to the orientation of the handle (one way ANOVA, p ≤ 0.05). To study how the distal components of the movement, such as the hand preshaping during the reaching of the handle, could influence the neuronal discharge, we compared the neuronal activity during the reaching movements towards the same spatial location in reach-to-point and reach-to-grasp tasks. Both tasks required proximal arm movements; only the reach-to-grasp task required distal movements to orient the wrist and to shape the hand to grasp the handle. The 56% of V6A cells showed significant differences in the neural discharge (one way ANOVA, p ≤ 0.05) between the reach-to-point and the reach-to-grasp tasks during MOV, 54% during HOLD and 52% during M2. These data show that reaching and grasping are processed by the same population of neurons, providing evidence that the coordination of reaching and grasping takes place much earlier than previously thought, i.e., in the parieto-occipital cortex. The data here reported are in agreement with results of lesions to the medial posterior parietal cortex in both monkeys and humans, and with recent imaging data in humans, all of them indicating a functional coupling in the control of reaching and grasping by the medial parietofrontal circuit.

Metamorfosi di una fabbrica: Indoor environmental quality nella riqualificazione di un settore delle ex officine reggiane

La nostra tesi propone un progetto di riqualificazione funzionale ed energetica di una porzione dell’area dismessa delle Ex Officine Reggiane a Reggio Emilia che comprende uno spazio scoperto di circa 42.500 m2 e un fabbricato, nel quale proponiamo di realizzare il museo delle officine, spazi per esposizioni temporanee e il nuovo polo archivistico di Reggio Emilia. Le Officine Meccaniche Reggiane sono state un polo industriale di particolare rilevanza a livello nazionale ed internazionale, diventando negli anni ’40 la quarta potenza industriale italiana dopo Fiat,Ansaldo e Breda. Dismesse dal 2009, si presentano oggi come un’area abbandonata di ben 260.000 m2 nella quale convivono la memoria e la speranza futura di rilancio della città di Reggio Emilia nel panorama europeo. Sulle tracce dei progetti già messi in atto dall’Amministrazione comunale, abbiamo fornito una proposta progettuale che consideri le vocazioni funzionali dell’area e le strategie energetiche possibili per rendere il progetto sostenibile sia dal punto di vista ambientale che dal punto di vista economico. Il lavoro è partito dalla definizione di un quadro conoscitivo dell’area attraverso una prima fase di analisi a livello territoriale e microclimatico servendosi per queste ultime del software di simulazione in regime dinamico ENVI-met. Questa prima fase si è conclusa con l’elaborazione di un masterplan, in seguito al quale ci siamo soffermate sul progetto di riqualificazione del capannone 15 e del grande spazio vuoto antistante ad esso. L’intervento sul costruito si può riassumere in tre parole chiave: conservare, aggiornare, integrare. Abbiamo scelto infatti di mantenere la robusta e ritmata struttura in acciaio, ripensare l’involucro edilizio in termini di una maggiore efficienza energetica e confinare i locali climatizzati in volumi autoportanti, garantendo, nell’atrio, condizioni di comfort termico accettabili unicamente attraverso strategie energetiche passive. Per verificare l’effettiva opportunità della soluzione ipotizzata ci siamo servite del software di simulazione fluidodinamica IES VE, il quale, attraverso la simulazione oraria del cambiamento dei parametri ambientali più rilevanti e degli indicatori di benessere (PMV, Comfort index, PPD..), ha confermato le nostre aspettative verificando che non è necessario intervenire con l’introduzione di sistemi di climatizzazione convenzionale. Per quanto riguarda i padiglioni entro i quali sono pensate le attività di servizio e supporto al museo e l’archivio, è stata verificata la soddisfacente prestazione energetica raggiunta attraverso l’utilizzo del software Termolog Epix5, il quale ha attestato che essi rientrano nella classe A con un consumo energetico di 4,55 kWh/m3annuo.

Temperaturas de confort e implicaciones energéticas en viviendas climatizadas mecánicamente. Estudio en clima cálido y húmedo

Este trabajo presenta un estudio de campo sobre confort térmico basado en la concepción adaptativa, para la determinación de las temperaturas y rangos de confort térmico de sujetos habituados a espacios enfriados mecánicamente en viviendas con aire acondicionado (AA) en el clima cálido y húmedo de la ciudad de Maracaibo (Venezuela) y las consecuentes implicaciones energéticas que tiene la satisfacción de esa demanda de confortabilidad en el sector residencial de la ciudad. Para la estimación de la temperatura de confort (Tc) y el rango de temperaturas de confort se aplican diferentes metodologías de análisis estadístico, las cuales son comparadas con las respectivas calculadas con el índice PMV; se analizan también otros aspectos asociados a la confortabilidad térmica, tales como las respuestas en las diferentes escalas de valoración de la confortabilidad, las preferencias, experiencias y expectativas térmicas de los sujetos. Las implicaciones energéticas se determinan en base al consumo de la energía eléctrica residencial debido exclusivamente a la variación de la Tc, entre la obtenida inicialmente en espacios naturalmente ventilados (NV) en Maracaibo (Bravo y Gonzalez 2001a) y la determinada ahora en espacios con AA. Para ello, se utiliza una metodología que es el resultado de la modificación parcial de la propuesta por Yamtraipat et al (2006). Entre los resultados y conclusiones derivadas de este estudio se encuentra que el 57 % de las personas prefieren las mismas condiciones confortables experimentadas en los ambientes con AA y solamente un 30 % prefieren experimentar ambientes ligeramente fríos y ligeramente calientes. Mientras tanto, las estimaciones de la Tc, y el respectivo rango, varían de acuerdo a la metodología empleada. Con la convencional metodología adaptativa, la Tc se estima en 25 °C en un amplio rango de 6 °C, entre 22 °C y 28 °C; mientras que con la metodología denominada “método de los promedios de los intervalos de las sensaciones térmicas” (Gómez-Azpeitia et al, 2007), la misma Tc se estima en 24 °C, en un rango estrecho de 22,5 °C a 25,5 °C y en un rango ampliado de 21 °C a 27 °C (amplitud 6 °C), donde se encuentran las tres cuartas partes de las personas del estudio. Ambas Tc son muy próximas a la temperatura operativa optima de 24,5 °C (rango de 23 °C a 26 °C) establecida por las normas internacionales ISO 7730:1994 y ASHRAE 55:1992 para el verano en climas templados. Sin embargo, la Tc estimada con los valores de PMV resulta ser superior en 1 °C y 2 °C a la Tc estimada con la metodología adaptativa (25 °C) y con el metodo de los promedios de los intervalos (24 °C), respectivamente. Con la metodología aplicada y la muestra del estudio se estima que de haberse registrado una Tbsint igual o próxima a 28 C (equivalente a la Tc en espacios NV en Maracaibo) en todos los espacios medidos (con Tbsint entre 19 C y 29 C), el ahorro total de la energía anual seria de 1.648,1 GWh en un ano respecto al consumo de AA en el año 2007 (2.522,3 GWh en un ano), mientras que el ahorro de energía asumiendo Tbsint de 24 C y de 25 C, resultan en 651,9 GWh en un ano y 425,7 GWh en un ano, respectivamente. Esto significa respectivos consumos adiciones de energía eléctrica equivalentes al 60,4 % y 74,2 %. Finalmente, los hábitos o conductas adoptadas por las personas de este estudio, sumado a las predominantes manifestaciones de confortabilidad en ambientes enfriados mecánicamente, redundan en mayores adaptaciones a condiciones de frio y exigencias de temperaturas de confort más bajas, con su consecuente consumo energético para proveerlas. ABSTRACT This investigation presents a study on thermal comfort following the adaptive approach for the determination of the thermal comfort temperatures and ranges of subjects accustomed to mechanically refrigerated spaces in dwellings with air conditioning (AA) systems in the hot and humid weather of the city of Maracaibo (Venezuela) and the ensuing energy use implications it has on the satisfaction of such demand of comfortability in the residential sector of the city. For the estimation of the comfort temperature (Tc) and the range of comfort temperatures different statistical analysis methodologies were used, which are then compared to the respective values calculated with the PMV index, also discusses other aspects related with thermal comfortability were analyzed, such as the responses on the different scales of perception of thermal comfortability, preferences, experiences and expectations of the analyzed subjects. The energetic implications are determined through the residential energy consumption related exclusively with the variation of the Tc between the originally calculated for naturally ventilated (NV) spaces in Maracaibo (Bravo y Gonzalez 2001a) and the one calculated on the present study with AA. For this, a new methodology was developed by partially modifying the Yamtraipat et al (2006) proposal. Among the results and conclusions of this study are that 57 % of the studied subjects prefer the same comfortable conditions experienced on AA environments and only a 30 % prefer to experience slightly cooler or warmer environments. Also, estimations of the Tc and its respective range vary according to the used methodology. With the conventional adaptive methodology, the Tc is estimated in 25 °C with a wide range of 6 °C, between 22 °C and 28 °C, while using the “thermal sensation intervals averages method” (Gomez-Azpeitia et al, 2007) the Tc is estimated in 24 °C on a narrow range between 22.5 °C and 25.5 °C and a widened range of 21 °C to 27 °C (6 °C in amplitude), a range where . of the studied subjects are located. Both Tc are very close to the optimum operation temperature of 24.5 °C (with a range between 23 °C and 26 °C) established on the ISO 7730:1994 and ASHRAE 55:1992 international norms for the summer on warm climates. However, the estimated Tc with the PMV indexes results to be 1 °C and 2 °C above the Tc estimated with the adaptive methodology (25 °C) and the thermal sensation intervals averages method (24 °C), respectively. With the applied methodology and this study sample, its estimated that if a Tbsint equal or close to 28 °C (equivalent to the Tc in NV spaces in Maracaibo) was registered in all measured spaces (with Tbsint between 19 °C and 29 °C) the total yearly energy savings would be of 1.648,1 GWh in a year with respect to the AA consumption in the year 2007 (2.522.3 GWh in a year), while the energy savings assuming a Tbinst of 24 °C and 25 °C result in 651.9 GWh and 425.7 Gwh in a year, respectively. This means that the respective additional electrical energy consumption amount to 60.4 % and 74.2 %, respectively. Finally, the habits or behaviors adopted by the subjects analyzed on this study, added to the predominant manifestations of comfortability in mechanically refrigerated environments result in greater adaptations to colder conditions and lower thermal comfort temperature demands, with the consequential increase in power consumption to meet them.

Development of a magnetic resonance compatible wrist device for the analysis of movement encoding in the brain

Tese de mestrado integrado em Engenharia Biomédica e Biofísica, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

Influenza dei fattori di vista nel calcolo delle condizioni di comfort termico in ambienti con impianti radianti

L’obiettivo di questa tesi di Laurea è stato di analizzare gli scambi termici radiativi che si verificano all’interno di una stanza; per eseguire questa analisi si sono calcolati i fattori di vista Fij tra diversi punti (i) definiti tramite una griglia regolare posta all’interno della stanza e le superfici che vi si affacciano (j); tale griglia prevede 25 punti posti a 3 altezze diverse, per un totale di 75 punti. Dalla conoscenza delle temperature superficiali si sono ottenuti i valori di temperatura media radiante nei punti della griglia, e successivamente i valori degli indici di benessere PMV (voto medio previsto) e PPD (percentuale prevista di insoddisfatti), fissando i parametri necessari. Il calcolo dei fattori di vista è stato eseguito tramite il software TRISCO®, dopo averne confrontato i risultati forniti con COMSOL® e dopo aver valutato la correttezza di alcune approssimazioni. Il modello utilizzato nelle simulazioni è costituito da una stanza di 5x5x2,8 m, in cui sono stati fatti variare il numero e la posizione di alcuni elementi caratterizzanti, come finestre e radiatori, oltre a tipologia di elementi scaldanti e posizione e numero di pareti esterne, tramite la variazione delle temperature. In seguito si è analizzata la potenza scambiata per irraggiamento dagli elementi scaldanti, per poter riconoscere gli elementi responsabili dei maggiori contributi; nel caso di pavimento o soffitto radiante si è divisa tale superficie in diverse porzioni per riconoscere le zone della superficie radiante più influenti. I risultati ottenuti mostrano che la presenza di radiatori, finestre o pareti esterne, introducendo elementi di disturbo asimmetrici, forniscono andamenti disuniformi di temperatura e PMV, con l’omogeneità che migliora allontanandosi da tali elementi; impianti a pavimento o soffitto radiante producono risultati decisamente migliori, sia per quanto riguarda i valori assoluti di temperatura e PMV, che nell’omogeneità della relativa distribuzione.

Operational and safety effects of driving on paved shoulders in Texas. Final report.

Texas State Department of Highways and Public Transportation, Transportation Planning Division, Austin

Moped task analysis. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Moped task analysis: instructional objectives. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Moped task analysis: task descriptions. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Vehicles-in-use sub-limit maneuvers. Volume I: executive summary. Final report.

National Highway Traffic Safety Administration, Vehicle Engineering Research Division, Washington, D.C.

Vehicles-in-use sub-limit maneuvers. Volume II: multi-vehicle test validation. Final report.

National Highway Traffic Safety Administration, Vehicle Engineering Research Division, Washington, D.C.

Vehicles-in-use sub-limit maneuvers. Volume III: effects of vehicle-in-use spring sag on vehicle handling and braking. Final report.

National Highway Traffic Safety Administration, Vehicle Engineering Research Division, Washington, D.C.

Analytical modeling of driver response in crash avoidance maneuvering. Volume I: technical background. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Analytical modeling of driver response in crash avoidance maneuvering. Volume II: an interactive tire model for driver/vehicle simulation. Final report.

National Highway Traffic Safety Administration, Washington, D.C.