Stochastic analysis of the VEGF receptor response curve

Recently, an analysis of the response curve of the vascular endothelial growth factor (VEGF) receptor and its application to cancer therapy was described in [T. Alarcón, and K. Page, J. R. Soc. Lond. Interface 4, 283–304 (2007)]. The analysis is significantly extended here by demonstrating that an alternative computational strategy, namely the Krylov FSP algorithm for the direct solution of the chemical master equation, is feasible for the study of the receptor model. The new method allows us to further investigate the hypothesis of symmetry in the stochastic fluctuations of the response. Also, by augmenting the original model with a single reversible reaction we formulate a plausible mechanism capable of realizing a bimodal response, which is reported experimentally but which is not exhibited by the original model. The significance of these findings for mechanisms of tumour resistance to antiangiogenic therapy is discussed.

An analytical tool that quantifies cellular morphology changes from three-dimensional fluorescence images

The most common software analysis tools available for measuring fluorescence images are for two-dimensional (2D) data that rely on manual settings for inclusion and exclusion of data points, and computer-aided pattern recognition to support the interpretation and findings of the analysis. It has become increasingly important to be able to measure fluorescence images constructed from three-dimensional (3D) datasets in order to be able to capture the complexity of cellular dynamics and understand the basis of cellular plasticity within biological systems. Sophisticated microscopy instruments have permitted the visualization of 3D fluorescence images through the acquisition of multispectral fluorescence images and powerful analytical software that reconstructs the images from confocal stacks that then provide a 3D representation of the collected 2D images. Advanced design-based stereology methods have progressed from the approximation and assumptions of the original model-based stereology(1) even in complex tissue sections(2). Despite these scientific advances in microscopy, a need remains for an automated analytic method that fully exploits the intrinsic 3D data to allow for the analysis and quantification of the complex changes in cell morphology, protein localization and receptor trafficking. Current techniques available to quantify fluorescence images include Meta-Morph (Molecular Devices, Sunnyvale, CA) and Image J (NIH) which provide manual analysis. Imaris (Andor Technology, Belfast, Northern Ireland) software provides the feature MeasurementPro, which allows the manual creation of measurement points that can be placed in a volume image or drawn on a series of 2D slices to create a 3D object. This method is useful for single-click point measurements to measure a line distance between two objects or to create a polygon that encloses a region of interest, but it is difficult to apply to complex cellular network structures. Filament Tracer (Andor) allows automatic detection of the 3D neuronal filament-like however, this module has been developed to measure defined structures such as neurons, which are comprised of dendrites, axons and spines (tree-like structure). This module has been ingeniously utilized to make morphological measurements to non-neuronal cells(3), however, the output data provide information of an extended cellular network by using a software that depends on a defined cell shape rather than being an amorphous-shaped cellular model. To overcome the issue of analyzing amorphous-shaped cells and making the software more suitable to a biological application, Imaris developed Imaris Cell. This was a scientific project with the Eidgenössische Technische Hochschule, which has been developed to calculate the relationship between cells and organelles. While the software enables the detection of biological constraints, by forcing one nucleus per cell and using cell membranes to segment cells, it cannot be utilized to analyze fluorescence data that are not continuous because ideally it builds cell surface without void spaces. To our knowledge, at present no user-modifiable automated approach that provides morphometric information from 3D fluorescence images has been developed that achieves cellular spatial information of an undefined shape (Figure 1). We have developed an analytical platform using the Imaris core software module and Imaris XT interfaced to MATLAB (Mat Works, Inc.). These tools allow the 3D measurement of cells without a pre-defined shape and with inconsistent fluorescence network components. Furthermore, this method will allow researchers who have extended expertise in biological systems, but not familiarity to computer applications, to perform quantification of morphological changes in cell dynamics.

What can grassroots leadership teach us about school leadership

This paper explores grassroots leadership, an under-researched and often side-lined approach to leadership that operates outside of formal bureaucratic structures. The paper’s central purpose is the claim that an understanding of grassroots leadership and tactics used by grassroots leaders provides valuable insights for the study of school leadership. In this paper, we present and discuss an original model of grassroots leadership based on the argument that this under-researched area can further our understanding of school leadership. Drawing upon the limited literature in the field, we present a model consisting of two approaches to change (i.e. conflict and consensus) and two categories of change (i.e. reform and refinement) and then provide illustrations of how the model works in practice. We make the argument that the model has much merit for conceptualizing school leadership, and this is illustrated by applying the model to formal bureaucratic leadership within school contexts. Given the current climate in education where business and management language is pervasive within leadership-preparation programs, we argue that it is timely for university academics, who are responsible for preparing school leaders to consider broadening their approach by exposing school leaders to a variety of change-based strategies and tactics used by grassroots leaders.

Effect of chute level on mill capacity

IN MANY FACTORIES, the feed chute of the first mill is operated with a high chute level for the purpose of maximising the cane rate through the mill. There is a trend towards trying to control chute level within a small control range near the top of a chute that can result in rapid changes in cane feeding rate to maintain the chute level set point. This paper reviews the theory that predicts higher cane rate with higher chute level and discusses the main weakness in the theory that it does not consider the beneficial effect on capacity of cane falling from the top of the chute to the top surface of the cane mat. An extension to the chute theory model is described that predicts higher capacity with lower chute level because of the effect of the falling cane. The original model and this extended model are believed to be the upper and lower limits to the true effect. The paper reports an experiment that measured the real effect of chute level on capacity and finds that increasing chute level does lead to higher capacity but that the trend is only about one-third as strong as the original theory predicted. The paper questions whether the benefits of slightly greater capacity outweigh the costs of operating with the small control range near the top of the chute.

高Mach数格子Boltzmann模型的改进

对文献「７」所提出的高Ｍａｃｈ数格子Ｂｏｌｔｚｍａｎｎ模型作了改进，克服了原模型拟结果与理论偏差较大、存在色散效应的缺陷，并进一步把Ｍａｃｈ数提高到５以上，据我们所知，这是目前同类研究的最好结果。

O processo de consumo de e-books

Dissertação apresentada à Universidade Fernando Pessoa como parte dos requisitos para a obtenção do grau de Mestre em Ciências da Comunicação, ramo de Marketing e Publicidade

Application of static charge transfer within an ionic-liquid force field and its effect on structure and dynamics

The effects of linear scaling of the atomic charges of a reference potential on the structure, dynamics, and energetics of the ionic liquid 1,3-dimethylimidazolium chloride are investigated. Diffusion coefficients that span over four orders of magnitude are observed between the original model and a scaled model in which the ionic charges are +/- 0.5 e. While the three-dimensional structure of the liquid is less affected, the partial radial distribution functions change markedly-with the positive result that for ionic charges of +/- 0.7 e, an excellent agreement is observed with ab initio molecular dynamics data. Cohesive energy densities calculated from these partial-charge models are also in better agreement with those calculated from the ab initio data. We postulate that ionic-liquid models in which the ionic charges are assumed to be +/- 1 e overestimate the intermolecular attractions between ions, which results in overstructuring, slow dynamics, and increased cohesive energy densities. The use of scaled-charge sets may be of benefit in the simulation of these systems-especially when looking at properties beyond liquid structure-thus providing on alternative to computationally expensive polarisable force fields.

Gaussian mixture background modelling optimisation for micro-controllers

This paper proposes an optimisation of the adaptive Gaussian mixture background model that allows the deployment of the method on processors with low memory capacity. The effect of the granularity of the Gaussian mean-value and variance in an integer-based implementation is investigated and novel updating rules of the mixture weights are described. Based on the proposed framework, an implementation for a very low power consumption micro-controller is presented. Results show that the proposed method operates in real time on the micro-controller and has similar performance to the original model. © 2012 Springer-Verlag.

Alliance Politics in Hybrid Regimes : Political Stability and Instability since World War II

Cette thèse étudie la stabilité et l’instabilité politique des régimes hybrides. Elle pose la question suivante : dans quelles conditions l’autorité des élites au pouvoir est-elle reconnue ou contestée? Notre réponse s’articule en lien avec le caractère inclusif ou exclusif de la coalition dirigeante : c’est-à-dire, l’alliance stratégique des élites dirigeantes avec les groupes sociaux dominants. L’inclusion de ces derniers favorise le consentement et la stabilité; leur exclusion entraîne l’affrontement et l’instabilité politique. Sa composition dépend (i) du degré de violence organisée extra-légale et (ii) du degré de pénétration de l’État sur le territoire et dans l’économie. La première variable permet d’identifier quel groupe social au sein de l’État (militaires) ou du régime (partis d’opposition) est dominant et influence les formes de communication politique avec les élites dirigeantes. La deuxième variable permet d’identifier quel groupe social au sein de l’État (fonctionnaires) ou de la société (chefs locaux) est dominant et oriente les rapports entre les régions et le pouvoir central. L’apport de la recherche est d’approfondir notre compréhension des institutions politiques dans les régimes hybrides en mettant l’accent sur l’identité des groupes sociaux dominants dans un contexte donné. La thèse propose un modèle simple, flexible et original permettant d’appréhender des relations causales autrement contre-intuitives. En ce sens, la stabilité politique est également possible dans un pays où l’État est faible et/ou aux prises avec des mouvements de rébellion; et l’instabilité dans un contexte inverse. Tout dépend de la composition de la coalition dirigeante. Afin d’illustrer les liens logiques formulés et d’exposer les nuances de notre théorie, nous employons une analyse historique comparative de la coalition dirigeante en Malaisie (1957-2010), en Indonésie (1945-1998), au Sénégal (1960-2010) et au Paraguay (1945-2008). La principale conclusion est que les deux variables sont incontournables. L’une sans l’autre offre nécessairement une explication incomplète des alliances politiques qui forgent les conditions de stabilité et d'instabilité dans les régimes hybrides.

L’étendue effective de la pratique d’infirmières en pédiatrie : ses déterminants et son influence sur la satisfaction professionnelle

Le déploiement optimal de l’étendue de la pratique infirmière, qui traduit la mise en œuvre du rôle professionnel, est essentiel à l’accessibilité, à la continuité, à la qualité ainsi qu’à la sécurité des soins, dont ceux dispensés aux enfants et à leur famille. Or, il semble que les infirmières éprouvent certaines difficultés à déployer pleinement leur étendue de pratique, ce qui pourrait également compromettre la satisfaction professionnelle, un enjeu majeur pour la rétention du personnel dans les organisations de soins de santé. Le but de cette étude est de mesurer l’étendue effective de la pratique d’infirmières en pédiatrie, ses déterminants et son influence sur la satisfaction professionnelle. Le cadre de référence, un modèle original développé dans cette thèse, prend appui sur la théorie des caractéristiques de l’emploi (Hackman & Oldham, 1974), le modèle tension-autonomie (Karasek, 1985), la théorie du rôle (Biddle, 1979) et les travaux de D’Amour et al. (2012) portant sur l’étendue de la pratique infirmière. Afin d’atteindre le but de cette étude, le modèle développé met en relation les caractéristiques du travail et les caractéristiques individuelles d’influence potentielle sur le déploiement de l’étendue de la pratique infirmière. Il présuppose également un lien entre l’étendue de la pratique infirmière et la satisfaction professionnelle. Un devis corrélationnel descriptif a été retenu pour cette étude. Une enquête par questionnaire auprès d’infirmières de cinq secteurs d’activités d’un centre hospitalier pédiatrique universitaire du Québec a été réalisée (N=301). Les associations entre les variables ont été examinées en utilisant des analyses bivariées, multivariées et un modèle d’équations structurelles. Les analyses effectuées révèlent une bonne concordance du modèle développé (ratio x²/dl= 1,68; RMSEA = ,049; CFI = ,985). Au total, le modèle explique 32,5 % de la variance de l’étendue de la pratique infirmière et 11,3% de la variance de la satisfaction professionnelle. Les résultats font état d’un déploiement non-optimal de l’étendue de la pratique infirmière (3,21/6; É.T.= ,707). Les variables significativement associées au déploiement de l’étendue de la pratique infirmière sont: la latitude décisionnelle (β = ,319; p <0,01), la surcharge de rôle (β = ,201; p <0,05), l’ambiguïté de rôle (β = ,297; p <0,05), le besoin de croissance individuelle de l’infirmière (β = ,151; p <0,05) et le niveau de formation (β = ,128; p <0,05). Il est également démontré que l’étendue de la pratique infirmière est associée positivement à la satisfaction professionnelle (β = ,118; p <0,01). Une description plus détaillée des résultats de l’étendue de la pratique infirmière en fonction du niveau de formation et du poste occupé met en lumière que les infirmières bachelières ont une étendue de pratique significativement plus élevée (3,35; É.T =,746) que les infirmières collégiales (3,12; É.T =,669). L’occupation d’un poste de clinicienne est aussi associée à une plus grande étendue de pratique infirmière. Précisément, les infirmières qui occupent un poste d’infirmière obtiennent un score de 3,13/6 (É.T =,664) alors que le score des infirmières qui occupent un poste de clinicienne s’élève à 3,48/6 (É.T =,798). Cette étude innove en présentant un modèle de référence qui a le potentiel de générer des connaissances importantes en sciences infirmières en lien avec le déploiement optimal de l’étendue de pratique infirmière. Prenant appui sur ce modèle novateur, les résultats révèlent les caractéristiques du travail sur lesquelles il y a urgence d’agir afin d’accroître le déploiement de l’étendue de la pratique infirmière et par le fait même la satisfaction professionnelle.

C–H local modes in cyclobutene. II. Laser photoacoustic studies 10 000–17 000 cm−1. Vibrational structure and C–H local mode dynamics

In part I of this study [Baggott, Clase, and Mills, Spectrochim. Acta Part A 42, 319 (1986)] we presented FTIR spectra of gas phase cyclobutene and modeled the v=1–3 stretching states of both olefinic and methylenic C–H bonds in terms of a local mode model. In this paper we present some improvements to our original model and make use of recently derived ‘‘x,K relations’’ to find the equivalent normal mode descriptions. The use of both the local mode and normal mode approaches to modeling the vibrational structure is described in some detail. We present evidence for Fermi resonance interactions between the methylenic C–H stretch overtones and ring C–C stretch vibrations, revealed in laser photoacoustic spectra in the v=4–6 region. An approximate model vibrational Hamiltonian is proposed to explain the observed structure and is used to calculate the dynamics of the C–H stretch local mode decay resulting from interaction with lower frequency ring modes. The implications of our experimental and theoretical studies for mode‐selective photochemistry are discussed briefly.

Graphical tracking systems revisited: a practical approach to computer scheduling in horticulture

Graphical tracking is a technique for crop scheduling where the actual plant state is plotted against an ideal target curve which encapsulates all crop and environmental characteristics. Management decisions are made on the basis of the position of the actual crop against the ideal position. Due to the simplicity of the approach it is possible for graphical tracks to be developed on site without the requirement for controlled experimentation. Growth models and graphical tracks are discussed, and an implementation of the Richards curve for graphical tracking described. In many cases, the more intuitively desirable growth models perform sub-optimally due to problems with the specification of starting conditions, environmental factors outside the scope of the original model and the introduction of new cultivars. Accurate specification for a biological model requires detailed and usually costly study, and as such is not adaptable to a changing cultivar range and changing cultivation techniques. Fitting of a new graphical track for a new cultivar can be conducted on site and improved over subsequent seasons. Graphical tracking emphasises the current position relative to the objective, and as such does not require the time consuming or system specific input of an environmental history, although it does require detailed crop measurement. The approach is flexible and could be applied to a variety of specification metrics, with digital imaging providing a route for added value. For decision making regarding crop manipulation from the observed current state, there is a role for simple predictive modelling over the short term to indicate the short term consequences of crop manipulation.

Exploring multidimensional person-environment fit

The current study examines the validity of a multidimensional Person-Environment (PE) fit model proposed by Jansen and Kristof-Brown (2006). The overall aim of the paper is to test the model’s factor structure and influences upon outcome measures. A panel of organisational employees from a wide range of companies and locations were asked to complete a survey (n = 1875) measuring five discrete multidimensional facets of PE fit (Person-Organisation, Person-People, Person-Job, Person-Group and Person-Vocation) and three outcomes; organisational commitment, intention to leave and job satisfaction. The first sequence of analysis tested the proposed model using Confirmatory Factor Analysis (CFA) statistical approaches. Model comparisons showed that Jansen and Kristof-Brown’s original model in which the five facets of fit coalesce into a multidimensional variable was a poor fit with the data, but that a model in which the five facets of fit operate independently was a good fitting one. The second sequence of analysis found that the model without the multidimensional variable strongly predicted the outcomes of commitment, job satisfaction and intention to leave. This paper discusses the implication of this research in relation to the PE fit literature.

Testing a multidimensional theory of person-environment fit

The current study examines the validity of a multidimensional Person-Environment (PE) fit model proposed by Jansen and Kristof-Brown (2006). The overall aim of the paper is to test the model's factor structure and influences upon outcome measures. A panel of organizational employees from a wide range of companies and locations were asked to complete a survey (n = 1,875) measuring five discrete dimensions of perceptual PE fit (Person-Organization, Person-People, Person-Job, Person-Group, and Person-Vocation) and three outcomes (organizational commitment, intention to leave, and job satisfaction). The first sequence of analysis tested the proposed model using Confirmatory Factor Analysis (CFA) statistical approaches. Model comparisons showed that Jansen and Kristof-Brown's (2006) original model in which the five dimensions of fit coalesce into a multidimensional construct was a poor fit with the data, but that a model in which the five dimensions of fit operate independently fit the data well. The second sequence of analysis found that the model without the multidimensional construct strongly predicted the outcomes of commitment, job satisfaction, and intention to leave. This paper discusses the implication of this research in relation to the PE fit literature.

Development of play profiles : influence of disability on children's play

Occupational therapists value play as a significant occupation in a child’s life and use play both as a means and as an end in itself to support development. This thesis explores the nature of play in children with developmental disabilities, seeking to determine whether there are consistent patterns of play specific to different disability categories. An extensive literature review of play and disability was completed, and Cooper’s (2000) model of play is used to organize the literature findings. This study investigated differences in play behaviour in 50 children diagnosed with Autistic Spectrum Disorder, Down syndrome, Developmental Delay and Physical impairments, aged 4 to 6 years 6 months who attended educational facilities in a regional centre in South East Queensland. Quantitative and qualitative play behaviour was assessed using two measures, Revised Knox Preschool Play Scale (Knox, 2008) and the Child Initiated Pretend Play Assessment (Stagnitti, 2007) with the Australian Developmental Screening Test (Burdon, 1993) used to determine developmental age to eliminate this as a potential confounding variable when statistically analyzing the results.
Cognitive, language and fine motor abilities were found to have a statistically significant impact on play ability rather than the different disability groupings. Children with Down syndrome had significantly more imitative play actions than any other disability grouping. Cooper’s (2000) model was found to be a useful tool to analyze differing play characteristics according to different disability groupings. Modifications to Cooper’s original model of play to more accurately depict play characteristics are proposed.